UOM Conversion from PO into SO

Can anyone tell me how to convert the unit of measure of the material from what is coming in 850 into the uom of the sales order uom.
thought would use a user exit and a function module Material_unit_conversion.
but wat user exit should be used?
Suggestions greatly appreciated.
Michelle.

Define the UOM conversion in Oracle.
Also if you are in R12, then you may setup the primary and secondary UOMs at the item master level to deal with both UOM.

Similar Messages

Radial gradient corrupted during conversion from EPS10 into bigger JPEG

I use Illustrator CS4 and Photoshop CS4 extended.
recently came scross rasteirizing of radial gradient when convert from AI CS4 file to EPS10 file and then buyer converts it into big 4000x4000 pxls JPEG. Never experienced that before.
It is visible only after conversion EPS into big JPEG.
Linear gradients are all smooth after conversion but radial is corrupted.
I clean my illustration before saving as EPS.
When I save my illustration AICS4 as EPS10, I check:
-preview-transparent;
-transparency preset : high resolution 100%,
-convert all strokes in outline,
-convert text in outline (if I have it in my illustration);
-include CMYK PostScript in RGB file,
-Compatible Gradient and Gradient Mash Printing.
I check then EPS file for rasteirizing : window-links.
No sign of any rasteirization. All nice and smooth.
here, how looks corrupted radial gradient after conversion to big JPEG from small EPS10. Note, that on the bottom of image linear gradient is almost ok.
What I am doing wrong?
When I upsize my AI CS4 file to 4000x4000pxls and then convert to EPS10, and then into JPEG of the same size, - Radial gradient is smoother, almost perfect. But the size of of EPS file is too big and out of acceptable limits.
Jim

Thank you for reply.
Now I see that I did not explain it properly.
Sorry for that.
I need to provide my illustration saved as EPS10 with small Jpeg for preview via internet to the client, the way he requires to have it. I do not know why he wants it that way.
After receiving my EPS file with small Jpeg, he is making from that EPS10 file a big JPEG for his needs. It is what he wants.
When he is convertin' EPS10 file into big JEPEG, radial gradient becomes corrupted.
I followed his steps to try to undertstand what went wrong and got the same corrupted radial gradient in JPEG file, as you see on provided image.
What I want to know is how to accomplish what he wants without loosing quality.
Could you tell me, please, how to save illustration as EPS10 in Illustrator CS4 proper way.
Thank you.

UoM Conversion from SAP units to ISO units -- Prod Order IDOC (LOIPRO01)

Hello,
We are trying to build interface for Production Order details to pass to a Mfg. system. using IDOC LOIPRO01.
Looks like the IDOC processing is converting SAP on-screen UoM to ISO UoM for ex. PC (in SAP Screen) to S2 (IDOC Field Value).
I would like to know if there is any OSS notes or anyother way to prevent this conversion and just pass the same value what we see in SAP screen to the Mfg. system.
Appreciate your inputs in thsi regard.
Best Regards,
Bharat.

changes in master data have only effect to NEW data, created after this change .
SAP never updates automatically already existing data.
Answer: No there is nothing that can trigger an automatic change.
changes to ratios between base unit and alternative units are unusual and the changer has to know about the effect. it is not only the existing info record, you have to think as well about open POs which still have the old conversions.

Boiler plate texts conversion from English into Chinese in forms6.0

Dear friends,
We need solution for converting all english boilplate texts in forms into Chinese language text.
We have created database with chinese char set. How to configure forms to accept and display chinese characters. Pls, give me the solution for this. Kindly expecting ur valueable reply
Thanks and regards
Radhakrishnan
null

Shift to Russian Keybaord layout and Copy using CTRL + Insert and Paste using SHIFT + Insert then it will not print ??????

Date conversion from 20071231 into December 31, 2007

Hi All,
Can anyone knows a FM that converts a date like sy-datum 20071231 into wordings like December 31, 2007.
Thanks...
Regards,
JC

JAycee
Right solution for you requirment,
DATA :ws_date(25),
      v_num type i,
       v_no1 type i,
      v_no2 type i.
CALL FUNCTION 'CONVERSION_EXIT_LDATE_OUTPUT'
EXPORTING
    input         = sy-datum
IMPORTING
   OUTPUT        = ws_date
v_num = strlen( ws_date ).
v_no1 = v_num - 8 .
v_no2 = v_num - 4.
CONCATENATE ws_date3(v_no1) ws_date0(2) ',' ws_date+v_no2(4) into ws_date.
write : ws_date.
Don't forget to reward if useful...

UOM Conversion changes where conversion is only used for reporting

I think this is a different situation than I've seen in other posts.
We have a UOM conversion from CS to POUND (i.e. 1 case = 30 pounds), and at some point may want to change it so that 1 case = 28 pounds. In our situation, all transactions are done at the CS (primary UOM) and the weight is only used in calculations to print on shipping documents. Is there any harm in just changing the 30 to 28 when that time comes? Again, there are no transactions that reference the weight, no PO's, no SO's, no financials, etc.
We also have a similar situation where a PALLET may contain 100 cases now, but in the future be reconfigured to contain 90 cases. Same idea, nothing is transacted in Pallets, and the conversion is only used in reporting. Seems like it would be OK to change that conversion without causing problems. Any thoughts?
Thanks for your insights!
Bill
(Running r12.1.3 with OPM)

I think this is low risk - just make absolutely sure that the uom was not used for customer pricing, internal pricing, boms, on ASL, on price breaks, on quotes, on POs, on material transactions, wip moves etc.
As long as it was truly used just for reporting, you should be ok.
Sandeep Gandhi

Uom conversions

hi gurus
How DP UOM conversion from CS to 9 Liters cases

Hi dallyanusha,
You can create user defined UOM conversion in CUNI transaction in APO or in R/3 and transfer to APO during the material transfer. Can you please brief about your actual issue.
Regards,
Saravanan V

How do I stop the iMessage conversation from automatically showing when I go into the I message center? I only want the contacts to show down the left side and nothing on the right until I select a conversation to view.

HOW DO I STOP THE WHOLE IMESSAGE CONVERSATION FROM AUTOMATICALLY SHOWING WHEN I GO INTO IMESSAGE? I only want the contact bar on the left to show and not the whole conversation, until I pick one to see.

You can't. You can sign out of messages and turn it off, but you can't do what you would like to do. You can send feedback to Apple.
https://www.apple.com/feedback/ipad.html

Incorrect UoM Conversion on Transfer Requirement from Production Order

I have a Question on a Production Order that created a Transfer Requirement. Looking at the Components of the BOM within the Production Order, I have a Material where the Issue Unit of Measure is QT and the Base Unit of Measure is EA, with a Quantity of 1. In the Material Master Alternate Unit of Mesaures, the Conversion is setup so that 1 QT = 1 EA. The question of why the 1 for 1 conversion is not relevant, as this is just how the material was setup and I know it does not make any sense. When the Transfer Requirement is created it is showing that 1 Qt = .25 EA. I am unable to locate where this conversion is coming from. We do not want to lose visibility of this part number, as creating a new part number with a Base Unit of Measure of QT would fix the problem.
Is there anywhere in configuration where there could possibily be a Conversion? I have looked at Control Cycles and the Reference Operation Set and do not see anything.

Closing Thread as there has been no responses but I am still looking for a solution. The only possibility that exists at this time is the material was copied from another material and the UoM Conversion was 1 QT = 4 EA on the Copy From Material. I can not see where any changes were made to the unit measure conversion for the new material. The only other possibility is the Production Order was manually converted to the new material incorrectly.

Article UoM conversion differs from Inforecord UoM conversion

Hi experts,
While creating article through MM41(ALE), in basic data, we have maintained base UoM as KG and another UoM 1 CAR = 12 KG. The article is gettting created properly.
But the issue is the conversion for CAR is not reflecting correctly in the info record, it is 1 CAR = 1 KG in inforecord. In Purchasing view, We have maintained CAR as order unit. and variable order unit as 2 (active with own price).
The conversion in inforecord should be as same as the article UoM conversion. Can you please throw some light on why is this happening?
Many thanks,
Maniraj

Hi,
I have checked inforecord log, there is no change log.
If the UoM measure has not been transferred to inforecord, the ideal conversion should be 1 KG = 1 KG, but in my case its 1 CAR = 1 KG, the order unit is getting transferred, why not the conversion value (1 CAR = 12 KG).
When i create directly throught MM41, all the details in the Note applies, and everything is fine.
Thanks,
Maniraj

HT3529 If logged into IMessage from my 2nd iPhone device will I be able to see conversation from my 1st on iMessage?

If I'm logged on iMessage on one phone and the other phone as well, can I see iMessage conversations from both?

If you are logged in with the same Apple ID with iMessage on both and you have the same phone number(s) and/or email address or addresses selected under you can be reached by iMessage at for your iMessage preferences on both, iMessage conversations will be kept synced between the two.

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Importing table dump from oracle into sybase

I was wondering if anyone has ever imported a table dump from oracle into sybase. I just tried it and it didn't work. I used TOAD to create my table dump file but when i imprted it into sybase using bcp in i got the following error
cs_convert: cslib user api layer: common library error: The result is truncated because the conversion/operation resulted in overflow.
CSLIB Message: - L0/O0/S0/N36/1/0:

If you are looking for a basic/standard way to exchange data between Oracle and Sybase, use the CSV format.
It is trivial to write a generic SQL*Plus script for Oracle to extract data from a table (or a SELECT) and spool this into a properly formatted CSV file.
It is also just as easy to use Sybase Bulk Copy utility to load that CSV file into Sybase.
There are also alternative methods. One would be to use Oracle's Heterogeneous Services. You can define a database link in Oracle that connects, via ODBC, to Sybase. And using this database link you can push (insert) data into Sybase.

FM for Material number conversion from R/3 to APO in R/3

Hi,
   Can anybody tell me conversion exit (function module) for Material number conversion from R/3 to APO in R/3 system. I mean i have 18 digit R/3 material number which i have to convert to 40 digit APO material number in R/3 system.
Please suggest to win full points.
Thaniks in Advance,
Chandan Dubey

Dear Chandan,
Conversion Exits:
CONVERSION_EXIT_MATN1_INPUT ....... If you are storing Material With Zeros
Then concatenate it with 22 zeros. i.e. '0000000000000000000000000000'.
For example:
data : v_matnr type matnr,            "R/3 Material
       v_apo_matnr(40) type c,        "APO Material with 40 length
       v_zeros(22) type c. value '0000000000000000000000000000'.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
       EXPORTING INPUT          = v_matnr
       IMPORTING OUTPUT         = v_matnr.
concatenate e_mantr v_zeros into
            v_apo_matnr.
Regards,
Naveen.

UOM Conversion to be used in transformation

Hi Experts,
I am trying to make use of the BI 7.0 UOM conversion feature in one of our InfoCubes where the source quantity which is in Base UOM needs to be converted to cases.
I went through all the steps which are as follows:
1. I have 0BASE_UOM as the base unit of measure for 0MATERIAL
2. A DSO was automatically generated with the name Z_OUOM I gave in 0MATERIAL configuration
3. I created a transformation for this DSO with source as 0MAT_UNIT
4. Created a DTP and loaded the DSO
5. Created a Conversion type with settings 'Dynamic Determination of conversion factor as Using Reference InfoObject = 0MATERIAL
Source Unit of Measure: Unit of Measure from Data Records
6. Target Unit of Measure: Fixed Unit of Measure = 'CS'.
In InfoCube transformation I have the following mapping:
Rule type: Direct Assignment
Target Unit: 0UNIT
Unit: From Conversion
Conversion Type: ZCASES
Source Unit: 0BASE_UOM
Source Fields of Rule:
0MATERIAL
0REQ_QTY
0BASE_UOM
Target Fields of Rule:
ZREQ_QTY
0UNIT
When I load the InfoCube, the quantities are indeed getting converted to cases provided there are conversion factors available for that material in the UOM generated DSO
Here is my question: How can I handle records where the material does not have conversion factors in the UOM generated DSO?
I get an error when loading using a DTP as 'No quantity conversion possible'. There is one record in the source DSO that has a material number with no unit conversions in UOM generated DSO
I am aware there is an option of using routine, but I do not want to use it unless I am sure this method won't work

Hi Aditi,
There is no way you can check if UOM is present or not in UOM DSO and then do the conversion via using conversion type.
What you can do is write the routine rather than conversion type, to fetch the data from the UOM DSO.
If conversion factor exist then you can convert it simple by multiplying with the value, if not then you can easily skip the record by putting IF condition.
IF factor <> 0.
ENDIF.
Hope this helps.Let me know if you need more info.
Regards,
Viren

UOM Conversion from PO into SO

Similar Messages

Maybe you are looking for