UOM Conversion while sending IDOC's using EDI
Hi ,
We are sending PO's using EDI and we want to convert the UOM while sending IDOC.
EX:- FT = FOT, VOL = VO
Is there any config.
Thanks in advace,
No.. I am using the standard function module.
We can cretae converion rule using SALE transaction for ALE.
SALE> Modeling and Implementing Bus Procc> Convert Data Between Sender and Receiver..-->
Like this do u we have any Config.. or shall I handle the conversion in the Customer exit ..
Similar Messages
-
Getting error code 37 while sending IDOC via WE19
Hello experts,
I am facing a very unlikely error which is preventing me from testing my scenario.
I dont have XI quality server and hence I am using my development server as both dev and quality. Hence I need to connect both dev and quality SAP R/3 system to my XI dev system. While I have done all the configurations in my XI and both SAP R/3 systems, its giving me error when i am trying to send IDOC from quality system.
In quality R/3 i have done the following:
1) Created RFC for my XI dev server
2) Created port for this RFC
3) Created partner profile adding all required IDOCS in the outbound parameters
4) Created distribution channel for all the idocs
In XI dev system i have done the following:
1) Created RFC for both dev and quality of R/3
2) Created port for both the RFCs
3) Maintained the IDOC metadata for both the ports
Now when I am pusing IDOC via dev of r/3 (we19) is working fine but when I am doing the same from quality of r/3 its giving me status code of idoc as 37 that says "An error was identified in the control record while adding an IDoc. The sender port SAPQTY_510 is invalid."
But I have created this sender port SAPQTY_510 in my XI dev system and have also maintained the idoc metadata. I dont know why this error is coming.
Can anyone please point out what mistake i have done or if i missed sometig as I am trying to connect 2 r/3 systems to one XI system.
Its really urgent hence your help will be highly apreciated.
Thanks,
Yashhi yash,
where you created SAPQTY_510 ,it should be created in R/3 Quality RFC destinations.
In XI DEV create port like SAPxxx WHERE xxx is SID of quality system.
actually we are getting confused.
i guess you used same name SAPQTY_510 in quality R/3 and XI DEV .
In error it says sender port SAPQTY_510 is invalid mean port of Source not XI DEV(receiver).
just try to use some other name say SAPXXX_QUA and confirm the error.
when IDOC is sent to XI DEV ,port of XIDEV SAPQTY_510 has nothing to play any role .
just check whether rfc destination of sender port (QUALITY R/3)you used is of type 3.
so please check at which port error is coming.
Thanks & Regards,
Rama Krishna
Edited by: rama krishna talluri on Mar 5, 2008 10:02 AM -
Problem while sending IDOC to File Senario
Hi Experts
I am having problem while sending the Idoc from SAP R/3 to File
I have done all the setting in SAP as well in XI but while pushing IDOC
I am getting error in the transaction sm58 in SAP R/3
" <b>The service for the client 300(My SAP R/3 client) is not present in Integration
Directory</b>"
I can any one explain me what to done on this....all the connections are fine
Waiting for Response
Adv points and thanx
RakeshReason and Prerequisites
You send IDocs from system ABC to the exchange infrastructure (XI) of system XIZ, and error messages are issued in system ABC (Transaction SM58) for the IDOC_INBOUND_ASYNCHRONOUS function module.
This note proposes solutions for the following error messages:
a) No service for system SAPABC client 123 in the integration directory
b) Transaction IDX1: Port SAPABC, client 123, RFC destination
c) ::000
d) NO_EXEC_PERMISSION: "USER" "Business_System"
e) IDoc adapter inbound: Error error ...
Solution
a) Error message: No service for system SAPABC client 123 in the integration directory
Solution:
You send IDocs from system ABC to XI. In the control record of the IDoc, the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the type (business-system/business-service):
Business system
Activities in the System Landscape Directory (SLD)(Create technical system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client.
For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the "Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with TransactionSLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD.
In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
b) Error message: Transaction IDX1: Port SAPABC, client 123, RFC destination
Solution:
The Integration Server tries to load the IDoc metadata from the sending system. The IDoc schemas from the Integration Repository cannot be used because they are release-dependent.
The sending system is determined by the value of the "SNDPOR" field from the IDoc control record (for example, "SAPABC").
Activities in the central XI system:
In Transaction IDX1, you can assign an RFC destination to the sending system (for example, "SAPABC"). This must be created beforehand in Transaction SM59.
Note that the IDoc metadata is cross-client data. In Transaction IDX1, only one entry must be maintained for each system. Only the lowest client is used by the runtime for Idoc metadata retrieval with RFC.
Ensure that only SAPABC and not "SAPABC_123" is entered in the port name.
c) Error message: "::000"
Solution:
This error occurs if the central XI system tries to load the IDoc metadata from the sending system by RFC.
There may be several different reasons for the failure of the metadata import, the error is not transferred in full by tRFC completely, and this results in the error message above.
User cannot log onto sending system
User/password/client is not correct or the user is logged due to too many failed logons.
Activities in sender system ABC:
Transaction SM21 contains entries for failed logons.
Activities in the central XI system:
Determine the sending port from the IDoc control record of the IDoc. If the ID of the sending system has the value "ABC", the value of the sending port is "SAPABC". You will find the RFC destination used for the "SAPABC" sending port with the lowest client in Transaction IDX1. In Transaction SM59, you will find the RFC destination containing the maintained logon data .
User does not have the required authorizations
Activities in the sender system ABC:
In Transaction SM21, you will find entries relating to authorization problems and more exact details.
Contact your system administrator and, if necessary, assign the user the required roles in user administration.
IDoctyp/Cimtyp cannot be loaded
Activities in sender system ABC:
In the sender system, you can check your IDoc types in Transaction WE30 (IDoc type editor) Take note not only of the errors, but also of the warnings.
The most common errors are:
- IDoc type or segments not released
- Segments that no longer exist are listed in the IDoc type
- Data elements that do not exist in the DDIC are assigned to fields
in the segment.
Contact your system administrator and correct these errors in the IDoc type.
d) Error message: NO_EXEC_PERMISSION: "User" "Business_System"
Solution:
You created a list of users in the directory who are authorized to use the "Business_System". The user in the error message is not on the list.
Alternatively, the same error is used if you have created a sender agreement with a channel of the IDoc type for the "Business_System" and the interface used. The user in the error message is not contained in the list of all authorized users defined there.
e) Error message: IDoc adapter inbound: Error error
Solution:
You send IDocs to the central XI system, where they are received by the IDoc adapter. The IDocs are converted into IDoc XML, and a corresponding XI message is generated and transferred to the XI Runtime Engine. The Engine tries to read its own business system from the "Exchange Profile". If the Exchange Profile is currently unavailable, the message is not processed and it is returned to the sending system with an error message.
Regard's
Prabhakar..... -
SM58 - Error while sending IDOC
Hi,
I got the following error while sending the IDoc to a XI system.
"No service for system (Idoc adapter port), client 800 in Integration Directory"
Please let me know whether this is due to an error in network or application error.
Note: remote logon is not successful in the XI system
Thanks in advance
Edited by: RPN on Jul 1, 2008 11:46 AMHi RPN,
Plz do check the following things :
1. Verify the logical business system in SLD.
To verify --- Go to SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client you used as Business system --> Here look for the logical system is defined or not.
2. Open ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System.
3. Refresh the full CPA Cache (userid must be XIDIRUSER/PIDIRUSER)
http://<hostname>:50000/CPACache/refresh?mode=full
Regards,
Vinod. -
Name or password is incorrect (repeat logon) while sending idoc
Hi All,
In R/3 System we created RFC destination to PI system by using RFCUSER as logon parameters. while executing Test connection it is connecting.
While sending the IDoc from R/3 to SAP XI, it is giving message as "IDoc sent to R/3 System or external program" and immediately displaying the PI Logon Screen with my userid.
When I checked the SM58 , "Name or password is incorrect (repeat logon)" message is giving.
Whether I have to create RFC Destination by using my userid or it may work with RFCUSR id.
When I checked the RFC destinations in R/3 and PI it is working fine.
My userid and password is working properly.
What I done wrong?
Regards
SridharHi,
You have to do the following checks
1) Check whether that RFCUSER is Present in XI or Not???check in SU01 T-code
2) In Sm59 , do Remote Logon also, Here this time it shld connect to XI automatically with out asking any Logon Details .
3) If this is asking the Logon details means, the Logon details which u have provided in SM59 is Completly Wrong
Regards
Seshagiri -
Error while sending the data using input schedule
Dear Friends,
I am unable to send the data using input schedule due to following error is occur while sending the data.
The Error Message : Member (H1) of dimension (ENTITY) is not a base member (parent or formula)
Can anyone please help me to resolve the above error.
Thanks and regards,
MD.Hi,
You are trying to send data to a parent/node, you can only send data in BPC to lowest-level children (base mamabers) of any dimension.
"H1" is a parent in the entity dimension so you should try sending to a child.
Tom. -
HTTP error while sending SOAP request using wsdl file
We created SOAP request using the wsdl file ; while sending SOAP request from Altova XMLSpy, we are getting the below error.
HTTP error: could not post file
Can you please explain how to resolve this issue
Regards,
Sanghamitrathere is very little information to help you here.
Can you confirm if this is a SOAP sender scenario or SOAP receiver scenario?
Also do go to thru these links to help you out;
Troubleshooting
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> SOAP
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP <-> XI <-> RFC/BAPI
Walkthrough - SOAP XI RFC/BAPI -
Problem while sending message (sms) using nokia ov...
recently my nokia ovi suite is updated to version 3.1.1.85, Now when every i am typing to send message from nokia ovi suite's messaging section and if notification for new message is on,
while typing if new message comes, it refreshes the screen (inbox) section and the alreday typed message disappears.
I didnt have this problem in previous version of nokia ovi suite. and i can send / receive message at a same time.hi all,
i want to send SMS using j2me. im using netbeens IDE.
if i put my sendSMS() method under startapp() it will work. but i want to send SMS using command button. ( when i press SEND command button i want to send my SMS)
if u know how to do this please email me - [email protected]
my method is given below. it's work............
public void sendMessage(){
String address = "sms://+5550001:1234";
MessageConnection smsconn = null;
try{
smsconn = (MessageConnection)Connector.open(address);
TextMessage txtMessage = (TextMessage)smsconn.newMessage(MessageConnection.TEXT_MESSAGE);
txtMessage.setPayloadText("rosa");
smsconn.send(txtMessage);
smsconn.close();
} catch (Exception e){
e.printStackTrace();
i want to send this message using command button , like this ..............
public void commandAction(Command command,Displayable displayable)
if (command == send)
sendMessage();
if i put like this it will give error
(Running in the identified_third_party security domain
Warning: To avoid potential deadlock, operations that may block, such as
networking, should be performed in a different thread than the
commandAction() handler.)
but it's work under startapp(). any one know the answer please help me..............................
[email protected] -
Problem while sending/Receiving request using the HttpURLConnection obj
Hi,
We are facing the problem while passing the request in Weblogic.
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
Currently we are migrating 2 applications to WebLogic. Application1 to application2 request should pass.
Below is some example we tried:
"When we send a request to our code using the SSOAdaptor code (which handles the request/session in our application) which is on the SunOne server the request parameters are received by our code successfully. And also in Create User Functionality of application1 we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass."
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues.
Where as when the request is sent from WebLogic to WebLogic the request parameters are missing some how.
Is there any issue in Weblogic? Please helpus on this.
Thanks,
Nagesh
Edited by: user9307541 on Mar 15, 2010 5:08 AMHi,
Please find below scenario for testing.
We have tested the SSOAdaptor code (it is the fucntion name which will send the data from source) locally by hittiing the WPS adaptor URL in a Java client program(TestRequest.java) and the request parameters were reaching the WPS Adapter successfully.
Then we have written two test servlets to test the communication between SSOAdaptor(TestServlet.java) and WPS adaptor(WPSServlet.java).
Functionality of TestSevlet: It is sending a request to WPSServelt similar to the way we are doing it in SSOAdaptor.
Functionality of WPSServlet: It will receive the request parameters and write the parameter Map to console.
We have deployed and these two servlets(in a single webapplication) on Tomcat server and the request parameters are reaching the WPSServlet successfully.
Output on Tomcat server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{TypeAcc=[Ljava.lang.String;@14e3f41, ServiceName=[Ljava.lang.String;@1acd47, GMEPortalUserID=[Ljava.lang.String;@19b04e2, UserID=[Ljava.lang.String;@5dcec6, Country=[Ljava.lang.String;@b25b9d}
after sending request
After this we have deployed these two servlets (with in a single webapplication) on the Weblogic server in Dev machine(path: /apps/usmport/domains/usmport/servers/usmport_admin/upload/ssoAdaptor/WEB-INF/classes/com/gm/gmeportal/security/adaptor) and
now the request parameters are not reaching the WPSServlet.
Output on Weblogic Server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{}
after sending request
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
When we send a request to WPSAdaptor using the Old SSOAdaptor code which is on the SunOne server the request parameters are received by WPS successfully. And also in Create User Functionality of Portal we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass.
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues. Where as when the request is sent from weblogic to weblogic the request parameters are missing some how.
Please find below javs source code used to test this:
TestRequest.java
import java.io.BufferedReader;
import java.io.DataOutputStream;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.MalformedURLException;
import java.net.URL;
public class TestRequest {
* @param args
public static void main(String[] args) throws Exception{
// TODO Auto-generated method stub
excutePost("http://localhost:8080/Testing/TestServlet", "GMEPortalUserID=captest.wss@it0555&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
//System.out.println("********** Now the request is from SSO *****************");
//excuteGet("http://10.156.0.173:7013/channel21/wpsadapter", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
public static String excutePost(String targetURL, String urlParameters)
URL url;
HttpURLConnection connection = null;
try {
//Create connection
url = new URL(targetURL);
connection = (HttpURLConnection)url.openConnection();
connection.setRequestMethod("POST");
connection.setRequestProperty("Content-Type",
"application/x-www-form-urlencoded");
connection.setRequestProperty("Content-Length", "" +
Integer.toString(urlParameters.getBytes().length));
connection.setRequestProperty("Content-Language", "en-US");
connection.setUseCaches (false);
connection.setDoInput(true);
connection.setDoOutput(true);
//Send request
DataOutputStream wr = new DataOutputStream (
connection.getOutputStream ());
wr.writeBytes (urlParameters);
wr.flush ();
wr.close ();
//Get Response
InputStream is = connection.getInputStream();
BufferedReader rd = new BufferedReader(new InputStreamReader(is));
String line;
StringBuffer response = new StringBuffer();
while((line = rd.readLine()) != null) {
response.append(line);
response.append('\r');
rd.close();
System.out.println("Response is:" + response);
return response.toString();
} catch (Exception e) {
e.printStackTrace();
return null;
} finally {
if(connection != null) {
connection.disconnect();
public static String excuteGet(String targetURL, String urlParameters) throws Exception
URL url = new URL(targetURL);
HttpURLConnection httpurlconnection =
(HttpURLConnection) url.openConnection();
/*httpurlconnection.setRequestProperty(
"cookie",
constructRequestParams(httpservletrequest.getCookies()));*/
httpurlconnection.setDoOutput(true);
httpurlconnection.setDoInput(true);
httpurlconnection.setRequestProperty(
"Content-length",
String.valueOf(urlParameters.length()));
OutputStream outputstream = httpurlconnection.getOutputStream();
outputstream.write(urlParameters.getBytes());
outputstream.flush();
//Get Response
try{
InputStream is = httpurlconnection.getInputStream();
BufferedReader rd = new BufferedReader(new InputStreamReader(is));
String line;
StringBuffer response = new StringBuffer();
while((line = rd.readLine()) != null) {
response.append(line);
response.append('\r');
rd.close();
System.out.println("Response from SSO is:" + response);
return response.toString();
} catch (Exception e) {
e.printStackTrace();
return null;
} finally {
if(httpurlconnection != null) {
httpurlconnection.disconnect();
TestServlet.java
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class TestServlet
public class TestServlet extends HttpServlet {
private static final long serialVersionUID = 1L;
* Default constructor.
public TestServlet() {
// TODO Auto-generated constructor stub
* @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
doPost(request,response);
* @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
//System.out.println("********************** the request Map is:" + request.getParameterMap());
try {
System.out.println("before sending request");
excuteGet("http://localhost:7003/ssoAdaptor/WPSServlet", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
System.out.println("after sending request");
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
public String excuteGet(String targetURL, String urlParameters) throws Exception
URL url = new URL(targetURL);
HttpURLConnection httpurlconnection =
(HttpURLConnection) url.openConnection();
/*httpurlconnection.setRequestProperty(
"cookie",
constructRequestParams(httpservletrequest.getCookies()));*/
httpurlconnection.setDoOutput(true);
httpurlconnection.setDoInput(true);
httpurlconnection.setRequestProperty(
"Content-length",
String.valueOf(urlParameters.length()));
OutputStream outputstream = httpurlconnection.getOutputStream();
outputstream.write(urlParameters.getBytes());
outputstream.flush();
//Get Response
try{
InputStream is = httpurlconnection.getInputStream();
BufferedReader rd = new BufferedReader(new InputStreamReader(is));
String line;
StringBuffer response = new StringBuffer();
while((line = rd.readLine()) != null) {
response.append(line);
response.append('\r');
rd.close();
//System.out.println("Response from SSO is:" + response);
return response.toString();
} catch (Exception e) {
e.printStackTrace();
return null;
} finally {
if(httpurlconnection != null) {
httpurlconnection.disconnect();
WPSServlet.java
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class WPSServlet
public class WPSServlet extends HttpServlet {
private static final long serialVersionUID = 1L;
* @see HttpServlet#HttpServlet()
public WPSServlet() {
super();
// TODO Auto-generated constructor stub
* @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
System.out.println("**********************Inside WPS Servlet -- the request Map is:" + request.getParameterMap());
* @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
doGet(request,response);
Thanks,
Nagesh -
Problem while sending the message using RWB
Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PMDear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM -
Company code does not exist error while sending idoc
Hi Expert
I am trying to send idoc from one client(800) to another client(810).I have faced error Company code does not exist, searched scn ,Got solution if company code does not exist in reciever system(810 client) ,it will show this error .Then i have tried to give specific company code which is exist in 810 client also .But same issue is coming . So what exactly the issue can any one say .
More Info:FI(Finance) header items and line items are sending .
Thanks & RegardsHi,
Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
Please activate in T.code: OMSY,
[For example: For Fiscal year variant K4]
In OMSY steps, u have to enteru2026u2026u2026..
Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
Company Name..
Fiscal Year of Current Period 2009
Current period (posting period) 03( )
Fiscal year of previous period 2008( will come automatic)
Month of previous period 02( will come automatic)
Fiscal year of last period of previous year 2008
Last month of previous year 12
Allow Posting to Previous Period (Back posting)
Disallow back posting after a change of period
Now create material with T.code; MM01
Regards,
Biju K -
Error getting while sending the Mails using 'SO_NEW_DOCUMENT_ATT_SEND_API1'
Hi ALL,
I HAVE THE REQUIREMENT AS SEND A REPORT AS A MAIL. IAM USING FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' WHILE EXECUTING ITS NOT SHOWING ANY ERROR. BUT IAM NOT GETTING ANY MAIL. I CHECKED IN 'SOST' TCODE. THERE I SEE A MESSAGE LIKE 'CANNOT PROCESS THE MSG TYPE IN SAP SYSTEM'. PLS TELL ME THE WHAT IS THE PROBLE.Hi
Please dont write in Capital letters, it considered as shouting. Hope you are aware of the forum rules.
You can check if you have made anything wrong in coding by referring wiki link.
[Sending Mails |http://wiki.sdn.sap.com/wiki/display/ABAP/SendingMails-HomePage]
Regards
Abhii -
Content Conversion for Sending Communication Channel using File Protocol
I have a file as follows:
CUSC,CRCA,OBAL,DATE
10197,0111,15250094.05,20071008
10758,0111,8131440.17,20071008
12939,0111,8212006.53,20071008
13129,0111,6953749.77,20071008
13331,0111,8607294.15,20071008
13579,0111,11972774.95,20071008
13676,0111,6636698.47,20071008
What is the content conversion that I can proceed with so that I can go with the mapping. I have to use File Adapter?
Please HelpHi,
Check below links for Content conversion.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful -
Error while sending a mail using UTP_MAIL package in Oracle 10g
Hi,
We are using UTP_MAIL package to send a mail from Oracle 10g.We have follwed the following steps ...
SQL> connect sys/password as sysdba
Connected.
SQL> @$ORACLE_HOME/rdbms/admin/utlmail.sql
Package created.
Synonym created.
SQL> @$ORACLE_HOME /rdbms/admin/prvtmail.plb
Package body created.
SQL > alter system set smtp_out_server = '<mail_server_ip:25>' scope =spfile;
System altered..
Now we try the code
begin
utl_mail.send(
sender => 'sender's mail',
recipients => 'receiver mail',
CC => 'optional',
subject => 'Testing utl_mail',
message => 'Test Mail'
end;
But we get the following error...
ERROR at line 1:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 97
ORA-06512: at "SYS.UTL_SMTP", line 139
ORA-06512: at "SYS.UTL_MAIL", line 405
ORA-06512: at "SYS.UTL_MAIL", line 594
ORA-06512: at line 2
We also tried connecting to the mail server through telnet .But it is not getting connected..
Please help us to solve the issue.From your own posting you may have the clue, if you try to access your mail server through telnet and it is not successful, it means the service is down or there are networking issues.
On pre 10gR2 versions there was a bug 4083461.8. It could affect you if you are on 10gR1
"Bug 4083461 - UTL_SMTP.OPEN_CONNECTION in shared server fails with ORA-29278 Doc ID: Note:4083461.8"
This was fixed on 10gR2 base and on 9.2.0.8.0
~ Madrid -
Error while sending mail when using Java Mail API
Hi Experts,
I am trying to execute a webdynpro application which uses the Java Mail API to send emails. The exception that I get on executing the application is :
Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
Can anybody please help me sort out the issue.
Regards
AbdullahHi,
Usually one get this error if the SMTP server is configured not to relay mails (a security measure) or the SMTP server need the mail to be sent from a trusted IP or with proper authentication. Some SMTP servers are configured to block junk mails.
Pls check with your mail server administrator.
Regards
Maybe you are looking for
-
Hp Color LaserJet CP2025n printing a yellow band down the right hand side,
I have a Hp Color LaserJet CP2025n running on a Desk top computer OS win 7 64bit, printer Serial Number [edited Serial Number by Moderator] and another number on the label CB494A, The printer has started printing a yellow band 1.5 cm wide all the way
-
This problem with screen going black is a recurring issue, apple us troubleshooter this with me and replaced my phone already for the same issue, new phone doing same thing. Is this a problem for others also?
-
What is the contact email for customer complaints?
I have an issue I doubt mac can or would be willing to resolve, therefore going into the shop, I believe, would be unproductive. My charger recently failed, and it was replaced in store (and for the hassle-free experience, I am rather appreciative of
-
HT204088 I need to get a refund for a subscription that was cancelled
I cancelled an Eharmony subscrition 2 mos ago yet I was billed frauduantly, now I cannot get someone to correct on Itunes anyone know how to accomplish this Gordian knot of a task?
-
TS3694 how do i fix error 3014
how do i fix error 3014?