UOM error in Material master.

Hi
When we log on to Spanish language, we are getting error in material master for Unit of measure, that the unit of measure has not been created in the language ES. But same UOM has configured in EN language and its working fine for material, while in Spanish language it appear as *** with error details,
Could you please suggestu2026
regards
Vanraj

Hi,
Extactly you are right..you got to Logon in Languange ES and create the required UOM in t-code CUNI...
this shuld solve the issue..try and revrt back..
Also,In CUNI on top menu Go to-Translation-UOM here maintain Source lang to Target lan
Reg,
JJ
Edited by: Jagsap on Apr 20, 2010 4:10 PM
Edited by: Jagsap on Apr 20, 2010 4:15 PM

Similar Messages

  • How to change the base UoM in the material master?

    Hi,
    I want to change the base UoM in the material master for a particular material but I can't change irt with MM02 as system says it has open routings for this material.
    I have set the deletion flag on the routings but still system shows open routings while changing UoM.
    Is there any standard SAP program by which UoM can be changed if open POs, stock etc. are present in the system?
    Thanks,
    Input

    HI
    It is possible to change the Base unit of measure in the following cases:
    1) If there are no stocks of the material in the syatem
    2)If there are no purchase requisitions, purchase orders, or scheduling agreements for the material.
    3)If a purchase order or purchase order item is not being created or changed.
    Procedure for changing is:
    Access the material master record in Change mode.
    Overwrite the old base unit of measure with the new one on any departmental data screen.
    Save the change.
    Thanking you.

  • Exchange rate error in Material Master Upload (MB1C - 561)

    Hi.
    While uploading material through MB1C with movement type 561, I am getting following error
    My company code currency, material master currency is EUR but still following error is occuring.
    "Enter rate EUR / rate type M for 01.10.2010 in the system settings
    Message no. SG105
    Diagnosis
    For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
    Procedure
    Add the missing entry in the currency conversion table.
    Execute function
    You can then continue to process the commercial transaction."
    Why system is asking to maintain exchange rate for same currency?
    What are the settings that I should maintain? Thanks in advance.
    Regards
    Anand

    Hi,
    My material master currency is EUR
    Both Stock and Upload GL accounts currency is EUR
    Co COde currency is EUR
    Where else is the revevant Settings?
    Further, I uploaded one material on 25/Oct/2010 well. But when I am trying to upload the same material again on or before or after
    25/Oct/2010 system is giving exchage rate error
    What could be the remedy?
    Regards
    Anand

  • Dump Error In Material Master Transaction

    Dear Experts,
    When i am creating or changing any material master record, i am getting the below dump error while saving the material.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLC1F2" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program "SAPLC1AX " in include "%_CESPCL
         " in
        line 77:
        "Component called ATWRT already exists. ."
        The include has been created and last changed by:
        Created by: "SAP "
        Last changed by: "SAP "
        Error in the ABAP Application Program
        The current ABAP program "SAPLC1F2" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        The following syntax error was found in the program SAPLC1AX :
        "Component called ATWRT already exists. ."
    Trigger Location of Runtime Error
        Program                                 SAPLC1F2
        Include                                 LC1F2U10
        Row                                     594
        Module type                             (FUNCTION)
        Module Name                             C1F2_SUBSTANCES_SAVE_TO_DB
    Can you please help me out with this?
    Thanks,
    Praveen

    Hi,
    I have not made any changes in the Enhancements/BADIS which are related to ATWRT, but created one ZTable for linking the
    Vendor (LIFNR), Material (MATNR) & Manufacturer (ATWRT).
    Here are the additional details of the dump which i am getting in MM01/MM02 transactions for your reference.
    Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of the dump
    Can you please help me with this?
    Thanks,
    Praveen
    Edited by: Rob Burbank on Feb 2, 2011 9:29 AM

  • ERROR IN Material Master Generation (AII 4.0)

    Hi all,
    We're working with Auto ID 4.0..
    When we try to create products from R3 ECC 5.0 we find errors, the message is well sent from R3 to XI and then to AII but when the proxy is executed is thrown an ABAP exception.
    These are our errors:
    Data cannot be maintained for set type COMM_PR_UNIT
    Data cannot be maintained for set type COMM_PR_SHTEXT
    Data cannot be maintained for set type COMM_PR_GTIN
    We've done the configuration on AII about hierarchy 'AIN_BASE' and category 'AIN_MATERIAL'...
    Do we miss anything??? Please help us..
    Thanks in advance

    Hi
    we are trying to send  material master data from ERP to SAp AII system through XI. I have seen in the integration repository there are standars interface mapping and mesage mapping exists. But not clear on how to do configuration in XI nd which adapter we need to use in reciever communication channel and also the setting nede to be done in AII
    can you please help me in this? Just give me the breif description of steps that need to be followed in ERP side SAP AII side and Xi side
    thanks

  • Error in Material Master download

    Dear all,
    We are in SRM 4.0 with support pack level 11. We have revalidated our setting as per sap note 720819 as well. While downloading the material master from ECC system we are facing this error in our inbound queue.
    "Function module "CRM_DOWNLOAD_RCV_EXIT" not found"
    Kindly suggest the solution.
    Regards
    Dinesh Singh

    Hi,
    See these threads for more pointer/info:
    Re: Function module "CRM_DOWNLOAD_RCV_EXIT" not found error
    Re: ERROR MESSAGE IN SQM2
    Also see whether all the steps have been performed as mentioned in this weblog:
    How to replicate material master from R/3 to SRM
    BR,
    Disha.

  • Error in Material Master

    I am getting an error while viewing in mm03 <i><b>Sales:Sales Organixation Data</b></i>  The error is <b>"No plant-specific data exists"</b>
    Please suggest what could be possible error in maintaining the material master and necessary corrective steps.
    Thanks
    Praveen

    The error is self explainatory "No plant-specific data exists"
    Go to mm01 & maintain the date for the organizational levels you are tyying to view:
    Plant      
    Sales Org. 
    Distr. Chann

  • WF - Error in Material Master extension

    Hello friends
    I have some changes to the coding(in ABAP not BOR) related to a workflow of Material Master creation and extension, there is a Z table from where it picks the profit centre to create and extend materials.
    When Profit centre is there for a plant, the workflow executes without error but when profit centre is not there then workflow is not executed, it gives the following error.
    ROLLBACK WORK executed (SWP_CALLBACK_WI_DONE item 8)
    ROLLBACK WORK executed (SWP_CONTINUE_WITH_NEXT_NODES item 1)
    stating that it could not find agents.
    I have checked in MM01 Profit centre is not a obligatory field and neither is there any check in coding for the same.
    I have no idea what to do, please guide.
    Thanks
    Bhavna

    Dear Bhavna,
    Please check if you are validating Profit Center before calling agent determination. It appears that Agent Determination is linked with Profit Center.
    Hope this is helpful.
    Regards,
    Naveen.

  • EAN error in material master

    Hi Everyone,
    We have an issue with International Article Number (EAN/UPC) being enetered in the material master.
    When the user enters particular EAN he gets an error which says "The EAN # may not be assigned externally"
    Message no. WE216.
    I have checked the config & it is ok. The EAN Number entered is well within the number range assigned to the particular EAN category.
    I also did a config check as per SAP note 879460 & corrected it in test sever, but still the error persists.
    Any suggestion on what may be wrong.
    Thanks.
    Akshay

    unfortunatly you did not post the EAN, as the number itself could explain some errors.
    Read OSS Note 545520 - FAQ: International Article Number (EAN/UPC)
    but the error itself explains already that you enter something manual, were SAP expects no manual entry.
    is your number range an external or internal number range?
    Edited by: Jürgen L. on Jan 11, 2011 11:16 PM

  • Error Loading Material Master Data

    Hi All, When I try to load ZMATERIAL in BW development. I am getting the below error. I am on BI 7.0. seems like bad data, but how to fix it?? any thoughts??
    in the details TAB of the monitor, I  get a red error message under
    'Transfer (IDocs and TRFC): Errors occurred '
    >>Processing (data packet): Errors occurred
    >>>Data Package 5 ( 10417 Records ) : Errors occurred
    >>>>Update ( 0 new / 0 changed ) : Errors occurred
    >>>>>Data records for package 5 selected in PSA - 1 error(s)
    >>>>>>ZMATERIAL : Data record 10416 ('000001 '): Version '000001 ' is not valid
    >>>Processing end : Errors occurred
    >>>>>Error 4 in the update

    Hi PK,
    i can give you some indications:
    This message indicate that in R/3 you have an incorrect  value and the data record indicate the key with The important information.
    When controlling the InfoObject and the transfer rule you can extract the info that you need to correct the data i think in your case you have to check the length and the character type between your infoobject in BW and the field table in R/3.
    transaction RSA1==> Infosource==> find your Infosource==> double click on your Infosource that take you to transfer rules==> and here you can check the mapping between your infoobject (ZMATERIAL) and the original field in R/3 that you have to correct.
    in the same screen under Transfer_structure/transfer_rules you can find the name of the datasource and in R/3 transaction RSO2 you can find the original table that contain the field to correct.
    when you  individualize the table and the field communicate this Info to the persons who works on R/3 and after they correct the data reload again in BW.
    i hope that this Info help you
    Bilal

  • LSMW error in material master classification uploading

    Hi,
    I'm uploading classification for materials by LSMW with a direct input
    but at the end of the uploading process I can read the following:
    Error Changing Classification Data
    Other
    ( CLAP_DDB_UPDATE_CLASSIFICATION: exception     3  )
    The Following File Was Created with the Error Records:
    RCCLBI03.ERROR
    How Can I find a list of all the exceptions ?
    Thanks!
    Best Regards

    CLAP_DDB_UPDATE_CLASSIFICATION is a function module. which is called from the batch input program RCCLBI03 that you have in your LSMW step1.
    so you can go to SE37, enter CLAP_DDB_UPDATE_CLASSIFICATION and either read the docu or directly display the FM, therein is a tab for exceptions, just count starting from top
    the third is classtype not defined

  • Error while changing the UoM in material master

    Hi experts....
    I am not able change the UoM in the material master. Even if,  all the PR , PO and reservations are cancelled .
    It still gives me error message " Manual  Reservations already  exists "
    Thanx
    Ganesh

    Hi
    may be some entries got not cancelled properly and entries got locked.
    Just check in SM12 if no entries are locked.
    regards
    Sidi

  • Not able to change UOM in material master for a material

    Hi all ,
    I have a issue with changing of the UOM in the material master , IN MMO2  after changing the UOM , in Display error , its showing the error as : The base unit of
                                         The reasons for
                                         Manual  reservation
                                         Reserv.No   , Item - No data
                                         Purchase order  - 30017056  , Item 1 - 1
    There is no stock in the previous as well as current period , and deleted the PR , still i am not able to change
    Please help urgently
    Thanks in Advance
    Neha

    Hi Satyajit,
    Please look at OSS  Note 1069560 - Data inconsistencies: Activating integration. models in parallel, if this helps you.
    Since  Gross data of material is in the basic view, it is common across plants , whereas, IMs are normally designed to have material masters at plant level.
    We may have same material in different IMs with different  plants. Therefore changes of the basic view fields are then contained in multiple IMs.  SAP advises to have a larger IM or sequential activation of IMs.
    I hope this will  help you .
    Regards
    Datta

  • How to maintain material master data in plant....

    Hi all,
    while creating BOM I am getting an error "no material master data in plant'  can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Hi,
    Please check the below link for MMR creaion .
    http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
    Regards,

  • How to maintain the material master data in plant

    Hi all,
    while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

Maybe you are looking for