UOM in master ORG and Child Organization
Hi all,
In INV user guide, in "Primary Unit of Measure" section, I read the "Note: If an item belongs to both a master organization and a child organization, and these organizations belong to the same costing organization, the primary unit of measure for the item must be the same within both organizations."
What happend if I configure the diferent UOM in master and child org?
Were you able to?
Similar Messages
-
Assign value from Item Master Org to Child Org
Hi guys i have created item master org and assign it some items,now i have create a child organization .now am going to miscellaneous transaction and want a transaction but my child organization item list is empty.please help me how i can assign master org item to child org
Hi,
You just need to go to the master item form, select the item/s, and click on Tools > Organization Assignment... That will take you to a rom where you can assign the item to any child organization. Hope it helps.
Regards. -
Relation between item master org and operating Unit
How single item master org can relate to multiple operating Unit so that items defined at Master Org level can be accessed in other operating units ?
Hi,
Item will be accessed in inventory organizations which you assigned the item to.
To access items from particular Operating Unit in Purchasing module
define Operating Unit Organization as a Inventory Organization as well.
Then choose this Organization as a Inventory Organization in Purchasing : Setup>Organizations>Financial Options.
In Order Management you choose an Operating Unit which items can be accessed.
Each item assign to Item Master Organization and to Operating Unit Organization and to required Inventory Organizations.
This works in 11i. I dont know how it is in R12.
regards,
Marcin -
SAP CUA connector changes password in master system AND child systems?
Please confirm if OIM can change the password in both SAP CUA master and child systems through SAP CUA connector. The connector guide mentions the following parameter can be defined in SAP CUA IT Resource.
Parameter: SAPChangePasswordSystem Flag that accepts the value X or ' '
If the value is X, then the password is changed
only in the master system. If the value is ' ', then
the password is changed in both master and child
systems.
This parameter is used by the Reset
Password function.
Thanks!Hi,
1) You can use report RSCCUSND to distribute users from CUA to child client. Check section "Sending User Master Data to a Child System" in [CUA cookbook|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/fe4f76cc-0601-0010-55a3-c4a1ab8397b1?quicklink=index&overridelayout=true].
2) if the user account has not been synced to CUA then you should be able to delete it in child system. The button should be displayed for unsynced users. You can use transaction SCUG to sync users between new child system and CUA. Check section "Transfering Users from New System" in [CUA cookbook|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/fe4f76cc-0601-0010-55a3-c4a1ab8397b1?quicklink=index&overridelayout=true].
Cheers -
Master package and Child Package
Hi Experts,
While doing the configuration for connection managers in a package I had noticed that if I don't hard code or give some invalid the user id and password for the database, even though it is configured it is throwing error while opening.
Is it the right way of doing?
Also when I run the master package all associated child packages are opening in different windows. Is it normal?
Please advice.
Regards
MukejeeHi Mukejee,
Except for executing a SSIS package in BIDS, we can also execute a package using the following methods:
Execute SSIS Package using DTEXEC.EXE Command Line Utility
Execute SSIS Package using DTEXECUI.EXE Utility
Execute SSIS Package using SQL Server Agent Job
In each method, we can specify the package configurations for the package at runtime. For the detailed information, please see:
http://www.mssqltips.com/sqlservertip/1775/different-ways-to-execute-a-sql-server-ssis-package/
http://technet.microsoft.com/en-us/library/ms162810(v=SQL.105).aspx
http://technet.microsoft.com/en-us/library/ms141701.aspx
Regards,
Mike Yin
TechNet Community Support -
Query to get master and child organizaitons of an item
Hi Experts,
Could some body send me the query to find out the master and child organizations for an item in oracle inventory.
Kindly help
ThanksHi,
Please review links and see if it helps you:
Apps Technical: Item Master Details in R12 (with category details)
11i - R12: Master Data (Item, Supplier, Customer, Bank, Item-Stock, Formula, Routing
Thanks &
Best Regards, -
HI, I have a Client who has 104 inventory Orgs. 4 are average costing. the rest are standard costing. BUT the Item Master is Average Costing. it was setup like so when i got in. the question is,
Can i create a new Item master Org and change it for all the Orgs so i can take advantage of transferring costs across standard costing Orgs and have one item master list?
Thanks
YadiThe primary uom on the item master cannot be changed. You can set up conversions between primary and other uoms.
One alternative you can look into is to rename the incorrectly created item to a different item number and redefine the item from scratch, with the correct UOM. Please note that in order to update the item number for the existing item you have to set the profile option Inventory: Updateable Item Name to Yes. (Please double check the exact profile option name). -
Master control attribute value discrepency between Master and child org.
Hi Guru,
We are facing a strange issue in Track install Base Attribute values. There are some 60K item having discrepency in the value of the this attribute between master and child.
We are wondering how it happens as this attribute is master controlled one and we never changed this attribute control and kept as Master controlled. The master value is true
If you guys experience this issue, please let us know the solution that you had applied to fix this issue.
regards
venkatTry executing the vo1 query before setting the bind variable for vo2, then execute the vo2 query (if that's what you want to do).
-
Problem with Master and Child table
Hi,
Working in jdev 11.1.1.2.0. I have one strange issue. i have master and child tables, the model is working fine with the view link. but when drag drop the same into my jsff. when i query the result 1st time 2 tables are refershing properly and data is coming. but the when i trying to select another row in the 1st table my 2nd table(child table) is not refreshing.
i put partial trigger of the 2nd table as 1st table id.
can any one help wht is issue here.
Edited by: user5802014 on Jul 15, 2010 3:44 PMCheck this post might help you
http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html -
How to find out master tables and concern child tables
Hi,
my schema contains 219 tables. I got this result by using query "selct count(*) from user_tables".
Now i need to know about master tables and concern child tables from these 219 tables.
please guide me.
Thanks and Regards,
VenkatWhat about this one!!!
select a.owner,a.table_name,a.column_name,
'------------------>' as POINTS_TO,b.owner,b.table_name,b.column_name
from dba_constraints c
join dba_cons_columns a on ( c.constraint_name = a.constraint_name and c.owner = a.owner)
join dba_cons_columns b on ( c.r_constraint_name = b.constraint_name and c.r_owner = b.owner)
where (a.table_name = '&table' and (a.owner='&owner')) -- foreign key
-- and (b.table_name = '&table' and (b.owner='&owner') ) -- source key
and ( c.constraint_type='R' )
order by a.table_namecomment and uncomment one between theese two lines to choose the direction.
(a.table_name = '&table' and (a.owner='&owner')) -- foreign key
-- and (b.table_name = '&table' and (b.owner='&owner') ) -- source keyBye Alessandro
Edited by: Alessandro Rossi on 22-ott-2008 10.40 -
Setting bind variable value programmatically for master and child VO's
Defined following BC:
Serv VO - Master VO, has Bind_cNum (bind variable)
ServDetail VO - Child VO, has Bind_cNum2 (bind variable)
ServViewLink VL - View link between Serv VO & ServDetail VO
in AMModule Impl have custom WS:
public List<ViewRowImpl> getMyServices(String cNum)
List<ViewRowImpl> result = new ArrayList<ViewRowImpl>();
ViewObjectImpl vo1 = getServ(); //Master VO
vo1.setNamedWhereClauseParam("Bind_cNum", cNum);
vo1.setForwardOnly(true);
ViewObjectImpl vo2 = getServDetail(); //Child VO
vo2.setNamedWhereClauseParam("Bind_cNum2", cNum);
vo1.executeQuery();
while (vo1.hasNext()) {
result.add((ViewRowImpl)vo1.next());
return result;
I am passing same cNum parameter to both Serv VO (Master VO) and ServDetail VO (child VO) as above. (this is in addition to view link bind variable :Id)
It shows in the logs that it is setting the values correctly:
<ViewRowSetImpl> <setNamedWhereClauseParam> [382] Serv ViewRowSetImpl.setNamedWhereClauseParam(Bind_cNum, 11771370)
<ViewRowSetImpl> <setNamedWhereClauseParam> [383] ServDetail ViewRowSetImpl.setNamedWhereClauseParam(Bind_cNum2, 11771370)
<ViewRowSetImpl> <doSetWhereClauseParam> [383] Serv ViewRowSetImpl.doSetWhereClause(-1, Bind_cNum, 11771370)
<ViewRowSetImpl> <execute> [385] Serv ViewRowSetImpl.execute caused params to be "un"changed
<OracleSQLBuilderImpl> <bindParamValue> [394] Binding param "Bind_cNum": 11771370
<ADFLogger> <addContextData> Execute query
-- when executing view link
<ViewRowSetImpl> <setParamValues> [425] ServViewLink_0 ViewRowSetImpl.setParamValues params changed
<ViewRowSetImpl> <doSetWhereClauseParam> [426] ServViewLink_0 ViewRowSetImpl.doSetWhereClause(-1, Bind_cNum2, null)
<ViewObjectImpl> <bindParametersForCollection> [436] For RowSet : ServViewLink_0
<OracleSQLBuilderImpl> <bindParamValue> [437] Binding null of type 12 for "Bind_cNum2"
<OracleSQLBuilderImpl> <bindParamValue> [438] Binding param "Bind_Id": 5018
from above log, when ServViewLink_0 is executed, it is changing Bind_cNum2 bind variable to null.
how can i pass same bind variable value to both Master and Child view objects from AM Impl.java
Edited by: bsrao on Oct 11, 2012 6:07 PM
Edited by: bsrao on Oct 11, 2012 6:10 PM
Edited by: bsrao on Oct 11, 2012 6:12 PMTry executing the vo1 query before setting the bind variable for vo2, then execute the vo2 query (if that's what you want to do).
-
Transaction Monitor - Org Unit (Service) and Service Organization
When using Transaction Monitor I notice that there are two available filters:
Org Unit (Service) and Service Organization
When I try and use these filters only some of the Org Units I have created using PPOMA_CRM ae visible and most of the other org units are not.
How do I make all the other Org Units I have created visible to this filter option?
Thanks
SimonHi Naveen,
We assign these Org Units on the support ticket in the support team field when creating the ticket. Do I need to make any further configuration as all the support teams I have entered on the tickets do not appear as a selectable option when using the Org Unit (Service) or Service Organization filters in Transaction Monitor.
I am sure there is somethign I am missing.
Thanks for your assistance.
Simon -
Building index from multiple master and child relationship tables
Hello,
My question is:
Is it possible to create the index for master and child tables?
If yes, can you please point me out to any links or give me an example.
Actually i just followed this below link to create the index using multiple tables
Building index from multiple tables for text search
I am able to create the index using above link,but problem accured , when i search for one master data column value then it is returning many rows with same master data for each child row.
for example
SELECT
a.conc_program_name,
a.conc_program_desc,
b.param_name
FROM a_master a, b_child b
WHERE b.report_dtls_id = a.report_id
AND CONTAINS (a.dummy, 'PAY') > 0
Which retruns
PAY Master A
PAY Master B
PAY Master C
Please let me know is there any way i can restrict this to single row with concatination of child data like
PAY Master A B C
Another doubt is ,i have the column value like p_consolidation_set_id,when i give this in CONTAINS (a.dummy, 'p_consolidation_set_id') > 0 ,then not able to get the any results.
please let me what shall i do for this issue.
Thanks
Message was edited by:
user496798There are various ways to concatenate the values. One nice generic solution is to use Tom Kyte's stragg function:
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:2196162600402
If p_consolidation_set_id is a variable name, not a value, then do not put quotes around it.
Message was edited by:
Barbara Boehmer -
Pages and Child Templates Not Updating
I'm having a problem in Dreamweaver CS5 where pages and child templates are not receiving updates made to the parent template. When I update the template, sometimes some files using that template will update, and some will not. Repeatedly updating the template sometimes forces the changes, but other times it does not.
For instance I was working on a 50 page site earlier, made up of 1 master template with 5 child templates. I made changes to the master template, and it went through the update process, saying all the child templates and files have been updated. However when I open some, not all, files, they are not updated.
I manually went through the entire site and hit 'update page from template', and that seemed to work. I opened a different site with only 1 template, did an update, and it only updated some of the files. I updated the template again, saved, and it then proceeded to update a few more randomly selected files.
This was happening sometimes in CS4, but in CS5 it has become a bigger problem. Please let me know how this can be resolved.
Edit: This is on a freshly reinstalled CS5 with all updates.MarilynWalker wrote:
Murray - Can share your book title with us, please?
Sure. It's Dreamweaver MX Templates by Brad Halstead and myself - ISBN 0-7357-1319-7. I spend quite a bit of time explaining nested templates. Sadly, nowhere do I say you should avoid them. But you should.
There is a master template that controls top level navigation and then five child templates that give different left-side navigation based on which section of the site the user is in. You can see this in action at www.homerenergy.com.
You should see how easy this is to do with server-side includes and a single template file. It's the best of both worlds.
You can see this in action at www.homerenergy.com.
Yep. http://validator.w3.org/unicorn/check?ucn_uri=http://www.homerenergy.com/&ucn_task=conform ance - even if you would leave the nested templates in place, you would sure want to fix those.
The section-specific navigation is very easy to manage either with template conditionals or with server-side includes. You can see this site - http://www.ent-sys.com - where I have done the section navigation on interior pages with template conditionals.
However, your site is small, and simple. Nested templates can work OK in such circumstances. But I have never seen a use of nested templates that couldn't be done more simply with some other approach. -
Query - Find Master Records - Doesnt Child Rec
Hello Experts,
BANNER
Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
PL/SQL Release 8.1.7.4.0 - Production
CORE 8.1.7.0.0 Production
TNS for IBM/AIX RISC System/6000: Version 8.1.7.4.0 - Production
NLSRTL Version 3.4.1.0.0 - Production
Below is my table - ORG_VALUE
ITEM_ID ITEM_TYPE ORG_ID
1000 TEST 222
1000 TEST_1 223
2000 TEST 322
2000 TEST_1 323
3000 TEST 222
4000 TEST 322222,322- Master Org id... 223,323 - Child Org id
I need to fetch those records which doesnt have child record for particular item in same table.
E.g; if 1000 item_id for 222 org id, then def. there should be child record 1000 for 223 org_id.
Similar for 322 and 323.
OUTPUT
ITEM_ID ITEM_TYPE ORG_ID
3000 TEST 222
4000 TEST 322Tried the following query...
SELECT *
FROM ORG_VALUE a
WHERE NOT EXISTS (SELECT 1 FROM ORG_VALUE b
WHERE a.item_id = b.item_id
and org_id IN (223, 323))
order by item_id;Is there any other query better than this one>?
Please help...Like this (assuming child org ID always ends with 3)?
1 WITH d AS (
2 SELECT 1000 as item_id, 'TEST' as item_type, 222 AS org_id FROM dual UNION ALL
3 SELECT 1000,'TEST_1', 223 FROM dual UNION ALL
4 SELECT 2000,'TEST', 322 FROM dual UNION ALL
5 SELECT 2000,'TEST_1', 323 FROM dual UNION ALL
6 SELECT 3000,'TEST', 222 FROM dual UNION ALL
7 SELECT 4000,'TEST', 322 FROM dual)
8* SELECT item_id FROM d GROUP BY item_id HAVING(MAX(MOD(org_id,10))) != 3
SQL> /
ITEM_ID
4000
3000Lukasz
Maybe you are looking for
-
My songs only play for 6 seconds
My imported music is only playing for six seconds then going to the next track. All of my purchased music works fine though. The imported files also play in their entirety on Windows Media Player so I know it's not the files' fault. Any suggestions?
-
Pros/Cons of replicating to files versus staging tables
I am new to GoldenGate and am trying to figure out pros/cons of replicating to flatfiles to be processed by an ETL tool versus replicating directly to staging tables. We are using GoldenGate to source data from multiple transaction systems to flatfil
-
An simple Example for beginer ...
Hi: I want to generate a pdf-file from somefile.xml and somefile.xsl using fop. And it doesn't work. Could somebody provide a simple example, how to do it? It would be very nice. Thanks a lot.
-
Oracle Waveset 8.1.1
Could someone please tell me when the patch for Oracle Waveset 8.1.1 will come out?
-
Early 2012 imac not showing oil paint filter in photoshop
I do no see the oil paint filter. Some research says graphics card not capable. That feature was the main reason for installing photoshop. Thanks Ed Jones Savannah Ga