UOM in Rg23A Part1 Register
Dear All,
In RG23A part1 Register, i am not able to see Unit of measure, its showing only qty as 10, but how we will know whether its Pcs, Kgs
But its updating in the table J_1IPART1
Regds,
CB
Edited by: Channabasappa.K on Mar 9, 2012 3:45 PM
Hi,
I have another rqmt, where in i can able to segraget Dealer invoices & manufacturer invoices.
I am not sure abut number range but I am sure about ECC no
you asked in your yesterday thread baout this
if vendor have delear registration then in that D will come( ECC NO)
If vendor is manufacturer then M will come In ECC number observer closely it
these are the parameter from which we can separate it
Regards
Kailas Ugale
Similar Messages
-
RG23A Part1 entries not printed in registers
Dear Gurus,
Transaction J1IEX generated RG23A PART1 and RG23A PART2 Entries and Internal Excise Invoice Number:
Internal excise Invoice Number - 2848
RG23A PART1 - 780
RG23A PART2 - 630
RG23A PART1 and RG23A PART2 Resisters are extracted using J2I5 and Printed using ZJ2I6.
After Extracting RG23A PART2, showing entry (630) in print preview of RG23A PART2 Register which is generated using J1IEX
But after extracting RG23A PART1 Register, not showing entry (780) which is generated using J1IEX in RG23A PART1 Register.
Do we need to post J1i5 before extracting J2i5, so that entries are printed in RG23A PArt1 register
Kindly help.
Regards,
PrashanthDear Gurus,
Find the current scenario, what we executed. we do not have a Purchase order as the Material moves with Movement Type 323 (TR. Code QAC2) from Storage location to storage location:
1. We entered J1IEX for Excise Value credit with option of Without Purchase Order noticed an entry in both the tables of J_1IPart1 and J_1IPart2
2. We ran J1I5 for Movement Type 323 u2026 Entry was recorded in J_1IPArt1 table
3. Run J2I5 for the Register extract
4. Run ZJ2I6 for the Register print
RG23 A Part 2 register print has the Value Credit entry
RG23 A Part 1 register print does not have either of the 2 above entries ( from J1IEX and J1I5)
My queries
1. J1IEX generates a Part 1 Entry into the table u2013 should this not be in the print
2. If J1IEX records an entry into the Part 1 table do we need to run J1I5 again for 323 as this posts 1 more record
3. ZJ2I6 needs to print the Part1 Entry for this scenario. Currently it does not
Kindly help -
SemiFinish material in RG23A Part1
Dear Gurus,
I am having the scenario in which client want the semifinish material after production to be in RG23A Part1.
Please suggest how to map this sceanrio.
Kindly note that i can't use Mov Type-101 to receive this material in inventory due to some technical constraints.
Waiting for responses
Thanks
AkshayAre you going to do production order confirmation? how you are going to take this semifinish material in stock after production?
-
hi,
in j2i6 while executing the register for print-out,we have three selection parameter that is excise group,date and format i.e script or excel.after execution system gives report of all materials, in that i want bifurcation for material i.e if i want to execute for only one material is it possible .
in j2i6 we have execution parameter date can we add one more parameter i.e material
programme name -j_2irap1
screen no-1000
is ther any user exit available in this screen
thksHi,
U can transport the same into excel and u can edit according to your requirement.
regards,
sujit -
Updating the register RG23a Part1
hii CIN EXPERTs,
against a raw material, i have done a PO and MIGO, did capture n posting EI w.r.t. PO.
now i am trying to update the register RG23 A part 1 with J1I5, gave plant, Excise grp, and Doc date, Posting date. Classification ROP. According to me, my all data, n configuration is correct.
but i am getting message that List contains no data. i am able to do Extraction n print. then why not updation?
Plz give the valuable inputs.Hi,
Please find following link
[J1I5|use of J1I5- Regester update;
[J1I5 Usage;
it may helpful to you
Regards
Kailas ugale -
RG23A ,RG23C register updation
Hi all,
We are doin all excise entries like J1iiIN, J1iEX etc etc
But our tables are not updated.
Now we require to maintain RG23A and RG23C registers
Can anyone help me with y this happening and how can i update the tables so that we can maintain and use the registers.
sapmmlearner
Edited by: sapmmlearner on Aug 13, 2010 10:17 AMHi,
This standard setting whenever if do any goods movt Register automatically get updated depending uopn the setting carried out against particular Movt type. Go as below.
Logistics - General>Tax on Goods Movements>India>Business Transactions>Specify Which Movement Types Involve Excise Invoices> Here you can maintain Register against particular Movt type which rigester shold get updated -
Transfer of material from RG1 to RG23A Part1
Hi Gurus ,
here I have a complicated scenario , actually this is client req regarding to captive consumption
the scenario is as following
they have one finished material say F01( FERT ) , normally they do sell of that material and sometimes they use this F01 as a raw material for power plant located in same plant under same excise registration , so what they want that is the material should be issued from RG1 to part 1 , they are taking that material in part1 .. in system we decleare that F01 as a RG1 in J1Id
here we mapped the stock transfer scenario in same plant for differant storage location , in GR we take that material in part 1 and system allows this
now we updateRG1( issue movement 641 ) by J1i5 and 23part1 ( classification ROP , movement type 101 ) , after extraction of both registers we can see issue entry in RG1 and receipt entry in RG23part 1 ,
so please suggest modification in process , as this process seems not normal .
Regards
ChandanDear,
Case1) Process flow IF material is Excisable:
Do 542 of material
Reconcile the challan with that dpcument
Complete the challan
Do 541 for second vendor
Raise the s/c Challan
Case 2) Process flow if material is non excisable
Do 542 of material
Do 541 to the second vendor
OR u can do
542 in MB1B wherein u can put the vendor where u want material to be sent.
Regards,
SNB -
J2IUN - Problem RG23a, Pla register balances
Hi gurus,
We uploaded RG23A Part II in table as 2 crores as well as 2 crores in gl for that.
In pla we uploaded around 50000,
When we gone utilisation they system showing only 84 lakhs in Rg23a and in pla it is showing more then 2 crores, which we are not uploaded any balance in pla.
What would be the reason, please explain us.
Regards
Sreenivas.Pplease check once in automatic account determination that which G/L a/c been congi for RG23A & PLA
path
Logistic Genrel -> tax on good movement -> India -> account determination -> Specify G/L Accounts per Excise Transaction
there will be some G/l account, copy them and display with transaction FBL3N to see the amount.
Rgds
S -
Hi Gurus,
1. In Display option of MIGO, System is not generating Part1 screen tab for some material GR although for some material GR system is generating Part1 Screen tab at Excise Item level of MIGO.
2. In J1IEX Display option, I can view the Part1 screen tab for Excise material for which system is not generating Part1 Screen tab al MIGO level.
3. I have checked all possible config. as well as transaction, in every cases system is generating Part1 Screen tab in MIGO Display option.
Gurus help me to resolve this issue.
Points will be awarded for usefull information.
Thanks & Regards
Manoj SinghHi
Similar issue, I am not able to post part2 for CVD, message says all part1 entries for this excise invoice has been cancelled. When i go to migo part1 is not displayed.
SCM says they have done everything right, GRN is done and i have also posted the invoice, CVD is pending to be posted.
It will be a very long process to reverse the GRN and Invoice.
Pls suggest solution for this without reversing the GR or IR.
Regards,
Vikram -
Part 1 entries for RG23A not printed in registers
Dear Gurus,
After capturing the excise invoice without refernce to the purchase order form transfer from stotage location to storage location excise Invoice we posted. RG23A PART1 and RG23A PART2 Resisters are extracted using J2I5 and Printed using ZJ2I6.
After Extracting RG23A PART2, showing entry (630) in print preview of RG23A PART2 Register which is generated using J1IEX
But after extracting RG23A PART1 Register, not showing entry (780) which is generated using J1IEX in RG23A PART1 Register.
Kindly let me know where i need to check/update the entries by which part 1 entries can be printed in registers.
Kindly help.
Regards,
PrashanthHi Prashanth,
I was just going through your message, Here I have one clarification, Is it really required to capture the excise invoice for Storage Location to Storage Location transfer of Materials. Excise is only applicable when the movements happens between two plants.. Please once again cross verify this transaction. As per my understanding the there is no necessity of capturing the excise invoice for this transaction.
Please do correct me if I am wrong!!!
Regards
Muralidhar Shetty -
My client is selling the raw material and sales is exports under lut.
now after sales rg23 part1 should update how it is possible
i have maintained sales views for this material and sold the material under lut exports.
now am updating j1i5 rg23 part1 it is saying wrong classification
i maintained 601 movement type for the register rg 23a updation
can plz tell the solution how to update the rg23 a part 1 register by selling the raw materialHi,
In case of Raw Material Sale, the steps as follows -
At the time of Purchase
1. Goods Receipt & Automatic Updation of Part1
2. CENVAT Credit for Incoming Material
3. Dispatch with Excise Invoice and pass on the same duty at the time of purchase.
Please inform at the time of Updation of RG23A Part 1 through J1I5 what was the classification you are selecting.
The following classifcation need to selection when you are updation RG23A PART1
Register Type
Goods issues
Goods receipts
For Goods Receipt : ROP
For Goods Issue: IIM, IPD , IWD
Please check which one you are selecting
Rewards if it helps
Regards
Goutham -
Hi,
I want to know when we do STO between plants for raw material. Which excise register gets hit in both the plants. What are the excise entries. Please tell me the usual practiceHi,
For raw material RG23A register will get updated. When you issue materila please capture the excise via J1IS. During MIGO in receiving plant RG23A part1 register will get updated .Capture the excise in J1IEX. Then RG23A part2 postings will get updated. To get the excise caliculations need ti implemet the tax procedure. In both the plants RG23A register wil get updated. in issuing plant RG23A register values will be reduced. Thanking you.
Edited by: Padmasri Garapati on Nov 11, 2011 1:03 PM -
Dear Gurus,
Is there any SAP Standard Report available for CIN to the following requirement?
Excise Report
ER1 Returns - Monthly Report
ER4 Returrns - Yearly Report
ER5 Returns - Yearly Report
ER6 Returns - Monthly Report
ER7 Returns - Yearly Report
RG23 Part A - Monthly Report
RG23 Part C - Monthly Report
Sales Tax Returns
VAT Monthly Returns
VAT 240 - Annual Returns Specific to Karnataka
E - Sugam Forms (Specific to Karnataka)
C - Form
Service Tax Return (ST3 Returns - Half Yearly)
If anything available, please provide....
Regards,
M.Mohan.HI,
Form
Layout description
Tcode/prog
J_2I_PLA
PLA REGISTER
J_2IPLA
J_2I_RG1
RG1 REGISTER
J_2IRRG1
J_2IRG23A_PART1
RG23A PART1 REGISTER
J_2IRAP1
J_2IRG23A_PART2
RG23A PART2 REGISTER
J_2IRAP2
J_2IRG23C_PART1
RG23C PART1 REGISTER
J_2IRCP1
J_2IRG23C_PART2
RG23C PART2 REGISTER
J_2IRCP2
J_2I_RG23D
RG23D REGISTER
J_2IRG23
J_2I_PLA
PLA REGISTER
J_2IPLA
J_2I_RG1
RG1 REGISTER
J_2IRRG1
J_2IRG23A_PART1
RG23A PART1 REGISTER
J_2IRAP1
J_2IRG23A_PART2
RG23A PART2 REGISTER
J_2IRAP2
J_2IRG23C_PART1
RG23C PART1 REGISTER
J_2IRCP1
J_2IRG23C_PART2
RG23C PART2 REGISTER
J_2IRCP2
J_2I_RG23D
RG23D REGISTER
J_2IRG23 -
No Internal Number in J_1IPART1 table
Dear Team,
I have updated the RG23A part1 register through T code J1I5 using the Classification ROP but to my surprise in J_1ipart1 table doesnt have any entry in the internal Number.Try J2I5-Excise Registers Extraction after J1I5.
Hope this will help u .
Regards,
Satpal -
RG23A register updation during excise invoice
Dear SAP gurus,
during excise invoice creation - J1IIN, when do RG23A part2 register get updated.
regards,
Praveen.Thanks for reply,
I understand the process of RG23A part2 entries in J_1Ipart2 table with Dispatch indicator D.
My query is ....
if the above talbe is updated with D type register, then these entires whould come during modvat utlization - J2IUN. because these are due for utilization.
In my system during j2iun, these invoices are not reflecting.
regards,
Praveen.
Maybe you are looking for
-
Hello ! I've got some problems with connecting my Samsung TV LA26B450 with my MSI N9500GT-MD512Z. I tried HDMI cable , I tried HDMI-to-DVI , - On my TV I only see " No signal " , but the videocard does really send something to my TV ( otherwise I ge
-
Hello All, I am facing an issue related to cash discount lost during payment run. 1.The document date on the Invoice is 04/29/2010. 2.The posting of the document happens on 05/07/2010 (mmddyyyy). 3. The total amount of the Invoice is 57000 4.The paym
-
Hi, I write the code for sending mail using javamail, it works fine for text message but when I attach any file the file content get inserted in mail and for images or pdf file not displayed proper, please help me out . Dnyanesh
-
Is it possible Line level approval in AME for purchasing requisition?
hi is it possible Line level approval in AME for purchasing requisition ? so that send each line to separate approver ?
-
Can't see luns over 9120-9216 isl
Howdy, We have presented a number of luns from our eva3000 disk array to our HP-UX host. The vsan and zoning is correct as far as we can tell & the luns can be seen correctly by a host plugged into the same switch as the array. The problem is that th