UOM in SRM 7.0 Documents

Hello experts,
We are implementing ECS scenario in SRM 7.0.
We found that Look up help for UOM in SC and PO shows only SI units (Like Kg,M,s).However Non SI Units like Feet,Yard, Pound,Square feet etc do not show up. These units are still widely used in the US and UK.
Do we need to do any settings for the Non SI units to be available?
Appreciate any inputs on this issue.
Thanks
RamanAK.

normaly in the F4 list it shows ISO codes. i dont have a system infront of me to valaidate the same

Similar Messages

Create UoM in SRM

Dear All,
Could you please help me with stepd for creating a new UoM in SRM?
I need to create a UoM of "No Dimensional".
Do I need to create it first in R/3? Through which transaction we can replicate it to SRM?
Is it transportable or do we need to maintain it directly in prodcution system?
Please help me.
Thanks.
SS

Hi,
1) You may define the UOM in SRM directly if it is for SRM Local purposes. Meaning that the SRM data will never flow over to Backend ERP.
2) If the doc using this UOM will flow over to ERP, then it is mandatory to define the UOM in Backend ERP & replicate it over to SRM.
Use tcode CUNI to define the UOM in the appropraite system, based on Points (1) or (2).
If it is (2), then you have to use DNL_CUST_BASIS3 to replicate the UOM from ERP to SRM.
Cheers,
Akash

Does SAP SRM support scanned document?

Dear Experts,
Does SAP SRM support scanned document in the sense that it can create system document out of a scanned document?? or do we need third party software like OCR, open text etc?
Thanks and regards,
Ranjan

I believe you'd need a third party scanning software. SRM does not provide such feature.

Change UOM in SRM

Hi,
Presently for a Particular product UOM is reflecting in SRM as 'BOT',where as this UOM is not maintained in Tcode CUNI.We need to change this UOM from 'BOT' to 'BO'.How to change this in EBP.
Appreaciate your Inputs!!
Thanks
Rakesh.

Hi,
Please refer the below link more detail..
Re: Transferring a new UOM to SRM !
Re: Error - Incomplete items in catalog. Only complete items were transferred
BR,
NMK

Transferring a new UOM to SRM !

Hi Experts,
We are presently in the release SRM Server 5.0. There is a new UOM added in the backend system, and I want to replicate the same from the backend system to SRM.
Could you let me know if there are any standard function modules which help serve this purpose?
Also, I happened to check the delta download feature - transaction R3AC3 in which I find the customizing adapter object "DNL_CUST_BASIS3", where I think I should be able to set the filter to upload a particular UOM to SRM.
Could you help me with the steps for just replicating one UOM from backend to SRM? Also what are the other available options for achieving the same?
Looking forward for your replies !!
Regards,
Rajesh Rajendran

Hi Muthu,
I clicked on new entries and here is what I was asked to fill.
Request name
Adapter object.
Underneath I find the checkbox for Inactive and Use once.
Now in the Adapter object - I could not find the table t006 entry.
However, there were customizing objects for CRM for eg: DNL_COND_A064, DNL_CUST_CUST1, etc..
Which one do I need to select for the UOM?
Awaiting reply from your end.
Regards,
Rajesh Rajendran

UOM group error while material document posted throgh BDC( MB01)

Hi All,
we are facing issue while posting material through MB0-goods reciept
error "UOM group not maintaineed for 'XXXXX" material" for some line items,
and i have checked in material master data, UOM group not maintained for some material,
even after maintaind UOM group for those material's still we are facing same problem,
as i checked in BDC code there is no validation for UOM group,
if we posted same PO manual, document posted successfull,
please suggest me.....why this error message coming eventhogh UOM group mainted?
Regards,
Suresh.D

check this link:
Updating Function module for Material master (UoM)
BAPI for MIGO
cheers
Aveek

Service entry sheet quantities and UOM not flowing into accounting document

Hi All,
I have a problem at the moment where the quantities and unit of measure entered in a service entry sheet, are being changed to '1 ACT' for all line items in the accounting document. We would like the real quant /UOM to be transferred here. We have tried using BADI AC_DOCUMENT_QUANTITY_GET but this is only affecting the first line item, and the rest are still 1 ACT.
Any help would be great!
Ryan

not solved.

Problem with UOM in SRM

Hi Guys,
I am experiencing a problem while transferring a contract item from a catalog( i.e in CCM) to SRM, the unit of measure PC is getting converted to EA. where as it should be PC only.
This is in SRM 5.0 version and Extended classic scenario.
Can anyone suggest me a soln for this soon.
Regards
Srujan K

Hi Sanjeev,
Thanks for your reply,
I have a clarification over here there are 3 units of measurements in SRM and where as in R/3 only 2.
i.e SRM (EA, PCE, ST) and in R/3 only EA and ST.
I have observed in SRM Each UOM has EA , as an ISO code. PCE UOM has PCE ISO code, ST UOM has PCE ISO code but for this the primary code is checked.
where as in R/3 Each UOM has EA, as ISO code and ST UOM has PCE ISO code with primary code as checked.
So does this anyways causes any issue.
Regards
Srujan

SRM PPS with Document Builder

Hi,
We installed SRM 7.0 SP8 with PPS.
How do I activate Document Builder. As per configuration guide i didn't see /IPRO/FND_DOCUMENT_BUILDER business function.
Couple of Question
1. Is it Add-On installation required for Document Builder ?
2. What is the latest version of Document Builder ?
3. How do I check whether document builder installed on my system ? Which parameter needs to check ?
4. How do I check the version of Document Builder on my system ?
Thanks a lot

That's the issue, As per configuration guide needs to activate /IPRO/FND_DOCUMENT_BUILDER business function. But I don't see that business function on SFW5.
But I activated both PPS function already.
Edited by: Laasya.Pat on Nov 29, 2010 8:47 PM

SRM PO Conversion document

Hello Gurus,
I want to upload my open PO's into SRM using a conversion document.
Can anyone tell me what are possible ways to upload PO's manually using any program.
We are implementing SRM ECS and the client doesn't have any legacy system.
Please give your value feedback how to go further with this issue.
Thanks,
mahesh

hi,
See the foll threads for solutions/pointers:
Re: Creating POs from Flatfile
Upload PO from XML file in SRM
BR,
Disha.
<b>Pls reward points for useful answers.</b>

How to block a particular UOM in SRM?

Hi All,
We have integrated SRM with Baan through XI.
For a particular company code in Baan, we have not maintained the UOM 'CARD'.
I checked in txn. CUNI in SRM system and UOM 'CARD' is there,
but it is not specific to any company code.
When user is creating SC in SRM using UOM 'CARD', PO gets created in SRM successfully,
but it fails at XI.
This is because mapping for 'CARD' is not maintained in custom table in XI.
How can we block this UOM 'CARD' for this particular company code in SRM (SC).
(without affecting other company codes).
Please help.
Regards,
Ruchika

hI
'BBP_DOC_CHECK_BADI' - BADI
PLZ VALIDATE THE shopping CART BEFORE YOU ORDERING.
If the card has CARD , issue warning message and change the UOM according to your business ned.
regards
Muthu

Wrong Sales UOM in Article and Billing document

Hi,
We have an issue in Aggregated Sales Idoc Posting. There is an article which is having Base UOM as "EA" . It has "CAR" = 12 EA.
So 2 UOMs are there. From POS when the file is posted with 1 CAR , in SAP Billing and Article documents created only with "EA" and not with"CAR".
In Aggregated "WPUUMS" IDOC,Sales UOM field is there and we checked the Idoc and it contains "CT" for CAR as Sales UOM , but while posting ,it takes the Bases UOM. In this case "EA". Its posting the right quantity as 1 for CAR.
Please help

Hi,
There is no any option to change currancy at time of invoice creation
But round the way solution is available
Create sales order with CLP Currancy (VA01) >>> Delivery (VL01N) >>> Create invoice with CLP currancy (VF01)
Then go to t-code EWUO
And change the currancy of sales document
Kapil

SRM Certification requirements & documents

What are the eligibilities for attending SRM certification?
Can anyone please provide me with the documentation/manuals for the SRM 5.0 certification?
Thanks in advance. You will receive the points for sure.

Hello,
I am also looking for the certification material for SRM 5.0. Could any one help me out by sending the documents, i will award points.
Thanks in advance
Guna

Where to download SRM 7 help document package to local PC?

Hi,
How/where to to download SRM 7.0 onlinehelp package to local PC? What's the URL for the docu package?
Regards
Jacky

Please follow the below link. Please be aware that you need a SMP id to download the same:
https://websmp204.sap-ag.de/swdc
-> SAP Software Distribution Center
-> Download
-> Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Application Components
-> SAP SRM
-> SAP SRM 7.0
Then just navigate to the child folder and download the below files:
50094586_1 - SAP SRM 7.0 SR1 Online Docu. 1 of 3
50094586_2 - SAP SRM 7.0 SR1 Online Docu. 2 of 3
50094586_3 - SAP SRM 7.0 SR1 Online Docu. 3 of 3
Hope this answers your question:
Regards, Kathirvel

UOM is getting updated in document line?

Hello,
I am creating an Sales Quotation uisng DI API. The UOM value is
incorrect on the item when it is created. When i open the quote in SBO it shows the wrong values.Since UOM is a readonly field how can the value be incorrect?
I am on SBO2005 PL10.
Thanks and Regards,
Sheetal

Sheetal,
If you create the Sales Quotation in the Business One application, do you get the same results, i.e., the incorrect UOM?
If you do get the same results through the UI then it may indicate the UOM is setup incorrectly.
Eddy

UOM in SRM 7.0 Documents

Similar Messages

Maybe you are looking for