UOM - ST not defined in EN
Hello experts,
I have to incorporate a constant as ST ( Same is the Case in AS-IS old 3.5 system) in the BI 7.0 transfeomation for the filed 0UNIT in my DSO.
When I define CONSTANT: ST for 0UNIT in the rule details of transfromation and do a check on my transformations I get a message UOM ST not defined in EN.
But in AS-IS 3.5 system also I am in EN logon and whan I check the UR there is no issue.
Could any one help me with this issue.
Regards,
Hi,
There two ways to maintain Units in BI system
1. Manually maintain them in CUNI
2. Transfer global settings from source SAP system. rsa1->source system, right click - transfer global settings.
Personally I beleive that the latter method is better since it allows to syncronize units in BI and R3 sides.
And again if you manually enter the unit ST in Cuni and then somebody transfers units from source system it can overwrite your entries.
So it's better to maintain them on r3 side and transfer to BI.
Similar Messages
-
Error while creating PO -- Unit of measure not defined for lanuage ZH
Hi all,
i have created the PR with EA as UOM. Then while creating PO, i am getting error like
' Unit of measure not defined for lanuage ZH' .
Then I execute CUNI
Then menu is GOTO > Translation > units of measure
enter source language and target language . After this i am getting the below message
---> Language not available on server
Please suggest what i should do. Thanks.
Thanks
pabiHI Pabi,
Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
Br,
Tushar -
Unit of measure ST is not defined as a commercial unit
Hi Experts,
While doing Punch Out catalogue in the Maintenance Order, i have received the following error "Unit of measure ST is not defined as a commercial unit".
I have checked in the transaction CUNI, and ensure that the above UoM is maintained.
This is a standard error message M3 491.
Any pointers will be appreciated....
by
PrabhuHi Prabhu,
GOTO CUNI
Check whether Commercial meas.unit field is ticked or not in application Parameters tab.
If not maintained, maintain here the tick
Regards,
Amol -
Unit of measure JHR not defined
Hi Friends,
What can cause this problem. I am getting this error message
"Unit of measure JHR not defined" after I am creating a Shopping card in EBP.
JHR is existing on both sides Backend and EBP in the table T006.
Regards
Marco M.COM_PRODUCT_UNIT
you need to debug this program . JHR is not SAP or international UOM . it could be customised one
COM_PRODUCT_UNIT_READ_API
Is a unit of the product convertable into i_unit?
CALL FUNCTION 'DIMENSIONCHECK_DIMENSIONLESS'
EXPORTING
meinh = iv_unit
EXCEPTIONS
dimension_not_dimensionless = 1
t006d_entry_missing = 2
t006_entry_missing = 3
OTHERS = 4.
CASE sy-subrc.
WHEN 0.
MESSAGE e020(com_product_unit) "unit is dimensionless
WITH iv_unit
RAISING unit_not_allowed.
l_lines = l_lines + 1.
CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
EXPORTING
i_base_unit = ls_base_unit-unit
i_alt_unit = iv_unit
i_tabix = l_lines
it_pr_unit = lt_pr_unit
IMPORTING
e_add_const = l_add_const
e_numerator = l_numerator
e_denominator = l_denominator
e_unit = l_unit
e_sub_num = l_sub_num
e_sub_denom = l_sub_denom
EXCEPTIONS
not_convertable = 1
overflow = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 1.
MESSAGE e020(com_product_unit)
WITH iv_unit
RAISING unit_not_allowed.
CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
EXPORTING
i_base_unit = ls_base_unit-unit
i_alt_unit = iv_unit
i_tabix = l_lines
it_pr_unit = lt_pr_unit
IMPORTING
e_add_const = l_add_const
e_numerator = l_numerator
e_denominator = l_denominator
e_unit = l_unit
e_sub_num = l_sub_num
e_sub_denom = l_sub_denom
EXCEPTIONS
not_convertable = 1
overflow = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 1.
MESSAGE e020(com_product_unit)
WITH iv_unit
RAISING unit_not_allowed.
WHEN 2.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING overflow.
E COM_PRODUCT_UNIT 020 Unit of measure & is not defined for product
When do you get this error ? while ordering Internal goods and services or describe procurement?
or while procure from catalog. -
Error as unit of measure PC not defined for language RO while creation ofPO
Hi GUYS,
When am trying to create a PO in ME21N transaction i got error as below,
unit of measure PC not defined for language RU
Message no. 06079
Table 006A contains no entry for this unit of measure
Please let me know what action to be taken from my side to over come this issue.
Note: If i check the related vendor i could able to view that the language maintained as RU.
Cheers,
Kumar.SHi Jurgen,
Thanks for your reply once again.
As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
Please revert back with your soilution.
Note: I have tried in SM30 but failed due to below error
The maintenance dialog for T006A is incomplete or not defined
Cheers,
Kumar.S -
LSMW Sales unit ****** 1 is not defined for item 000000 2
Hi, all,
I am trying to create order using LSMW with
Object 0090 Sales documents
Method 0000
Program Name RVINVB10
Program Type D Direct Input
The issue is at the Sales Unit.
I prepared the unit as PC in the folloiwng 3 fields
ZIEME Target quantity UoM
VRKME Sales unit
MEINS Base Unit of Measure
But get the following error, any thoughts?
Start of processing
V1 384
Sales unit ****** 1 is not defined for item 000000 2
Data from this document has not been saved ***Alright Koffer,
I'll give U the place, from where this error can occur, check which is applicable to you:
1) In FV45PF0M_MARM_SELECT, after calling the FM MATERIAL_READ.
2) In Include, FV45PF0V_VBAP-UMVKZ_ERMITTELN, after calling the FM : MATERIAL_UNIT_CONVERSION.
3) In Include FV45PF0V_VBAP-VRKME_PRUEFEN, after material unit conversion.
4) In Incl. FV45PFAP_VBAP_FUELLEN_MAAPV, after call to the FM : F4_ALLOWED_QUANTITY_UNIT.
If U understand German( Ich Keine Deutsch lernen ), U might go to these programs and check the description.
However, all these point to the Sales Unit as U already know.. check all the data related to the Sales Unit and whether this unit is allowed for the material being used.
Rgds,
Raghu. -
Unit of measure EA not defined for language RU
Hi gurus,
have you encountered this error while creating a PO? can't find any supporting document online.
please help how to resolve.
thanks,
mmHi Manohar,
Language RU (Russian) is not defined in our system and therefore the translation in CUNI is not the appropriate solution for this error.
Instead, we just maintained the vendor master to be in EN language to stop the system error.
thanks for your input anyway.
melanie -
Why would I get ReferenceError #1065: "Variable title is not defined."
Well of course it's not defined. It's a dynamic class, and strict mode compilation is turned off so that I don't have to declare the property to compile it.
I've created a library item named "Page" with a single TextField instance named "title".
Page's class is defined in an ActionScript file, and it's assigned to the library item in export for ActionScript.
Page's ActionScript file defines the class as a "dynamic" class, so I should not be getting this runtime error. I turned off strict mode compiling, since it seems to be designed to check the presense of property definitions at compile time for dynamic classes like MovieClip.
public dynamic class Page extends MovieClip
public function Page()
super();
var text:String = title.text; //title can be moused over in the debugger here and shows the correct value, but the flash player throws a runtime error when it tries to access it, but it shouldn't because this is a dynamic class.
So why am I getting a runtime error for the field "title". It makes no sense, because if I step to that line in the FlashDevelop debugger and hold the mouse over "title", it shows that it is in fact the instance of the TextField that I'm trying to access. Yet the player throws an error when I actually try to access it.
Is it a problem or limitation with the access style (i.e. would it work fine if I accessed it as "this.title" or "this["title"]"?Nevermind. This was apparently a browser caching issue. The Page base class is defined in the main interface swf, and is externally referenced through its swc in an external "lesson" file that declare a subclass of Page. It was this custom subclass of Page which was throwing the error (basically the same as the simplified example I wrote for my post, where it simply tried to access "title" as a dynamic property of the Page). What happened is the browser was caching an old version of the lesson file with the old definition of the class that was not declared as dynamic. I had received the error before, then updated the class, then I was surprised to see the error persist. It suddenly dawned on me that the browser was probably caching the old version, so I cleared the cache and it seems to work fine now.
Actually, it is a problem after all. I forgot I had updated it to use "this.title" syntax on the page I tested after clearing the cache, but the other pages that try to access title directly as "title" still throw the error. So it seems to be some sort of quirk in how flash accesses properties of a dynamic class. If you try to access them direclty, it must do so in a way that requires the property to be defined, but if you access it via "this.title" or this["title"], the it seems to resolve the property value without throwing the error.
This sucks. I was really trying to not have to write "this." for every property. The entire display list is dynamically generated from some custom XML that allows me to call constructors and set complex type-safe properties, and during construction it was copying each item into a Dictionary by name. This Dictionary was then assigned to the page class as "items", so I was accessing each display object as "item.name". Then I got the brilliant idea of just making Page and its subclasses "dynamic" so that I could just add the DIctionary values on the Page instance itself. I thought I would be able to access the dyamic properties just by their name such as "title", but lo and behold, Flash strikes again, and I have to use dot notation anyway. What do you all think? Any solutions? -
Logical System is Not Defined in EBP...
Hi SAP GURU's,
Please do Accept My Thanks for Kind Help
Rendered So far ..
My issue is whie working wih Accoutn Assignment is EBP ,I Tried to Maintain Logical System ..But system is throwing Error Massage Logical System is Not Defined in EBP..
Where as it was Defined and Assigned to the Client
in the Configuration ...
The Same thing has been defined in R/3 also ...
what Could be the Reason..? ? ?
Could Any Gentleman through Some light on this
Suitable Points Assigned for the Right Answer
Thansk in Advance
AdarshHi,
Pl define the same logical system names in the Define Back end systems or in the Table
bbp_backend_dest.
Thanks & Regards,
Nagarajan -
Logical System is not defined in table SMOF_ERPSH!
Hi,
When i am replicating a material group to SRM system, in SMQ2, the error message appears as 'Logical System is not defined in table SMOF_ERPSH!'.
can any one please let me know why this comes up, i have checked the SMOEAC settings, its fine and the logical system entries are already present in the tabeHi,
Can you verify all your settings as per note 720819?
Also under SMOEAC transaction, site attributes for your site type 'CRM' may not have any value. Please define attributes for your SRM RFC destination. Select the correct RFC destination, then click on button 'Get Values'.After doing this, table SMOF_ERPSH should be populated correctly.
Regards,
Nikhil -
Inutilização de NFe: Log de erro Message type 8 is not defined
Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela MachadoVerifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM -
Hi, it is my first attempt to modify a rdf file.
I run into a problem while trying to add an additional user parameter in an existing rdf file. While I am successful in adding a new FREQUENCY user parameter and I am able to update the form to show this new parameter, I am not able to run the report.
I have updated the SQL query in the report editor, under data view to use this new parameter :FREQUENCY. (select ... from table where frequency= :FREQUENCY) There was no error here.
Whenever I run the report, I will always get an error saying:
"REP-0730: The following bind variable is not defined: "(nothing behind this error message)
The program will have a memory error and it exits itself.
I had tried many methods trying to solve this problem to no avail.
I am using Oracle 9i Reports Builder 9.0.2.0.3.
I would appreciate any help given on this matter.
Thank you :)
Message was edited by:
LeionIn Object Navigator Under Layout ->User parameters are you able to see your bind variable FREQUENCY?
-
Hi everyone,
I have a CF9 ORM problem that I haven't been able to figure out and thought I'd see if you had any idea. I have seen a few postings talking about a "similar" problem but none of them correctly resolved this particular issue. I appreciate any help you can offer.
I recently created a CF9 app where I generated scripted ORM CFCs for my app using ColdFusion Builder. It worked great and my app was completely working. However, when I was adding some enhancements, I ran into an error when I restarted the CF app server. Here's the message I keep getting:
"Id field not defined for cfc Path.to.my.ORMCfCPage. Either the table should have a PK column mapped to a cfc field OR at least one field should be specified as id."
My App.cfc file only had orm enabled (no other mappings) when it was working. I've since tried specifying things like the cfc location etc. and it still hasn't helped.
// MORE DETAILS:
- When my app was working, I had moved it to 2 other servers. I had this error on both of those but not on my local copy. They all use the exact same database.
- The last change I made before the error was adding a generator="identity" field to my generated ORM beans. Once I got the message, I tried changing it back and restarting again but still got the error.
- I've also made sure all of the Adobe tags are in my web root (as suggested in a prior posting about this problem). I've search all over for a solution and nobody has a solution posted online that works so far.
Do you have any idea why this is happening?
Thanks!
JeffQuick thought and probably not relevant, but do you have this.ormsettings.savemapping set to true in your Application.cfc? I've fallen foul of this before - once CF has generated the hbmxml files and saved them to disk you can make all kinds of changes to your code which won't make a difference as it'll continue to read from the file versions, but only for certain properties and methods at times it seems.
Long shot I know, but I found CF ORM to be a nightmare for seemingly random caching. -
Payment order are not defined for extended withholding tax
Hi Gurus,
Would you please help me with the message below. It appears on F110 when I try to pay a vendor open item with extended withholding tax:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcomeThe payment method "Y" the option "payment order only" was marked?
For a withholding tax type with accumulation in a company code with extended withholding tax payment
methods that create only payment orders can´t be used. Payment orders can only be created only if there are
no tax types with accumulation involved in the paid items of the payment run.
The functionality extended withholding tax works fine for Brazil
however, you can´t use the payment order with this functionality.
Please, review your customizing for payment method 'Y" in transaction
FBZP.
Best regards,
Leonardo Vedovelli
FI Support Engineer
SAP Active Global Support -
Periods not open and No ranges not defined
Hi
When trying to post documents in fb01 or f-43 i get a warning that the period is not open for the year 2008. Earlier I had defined the open and close posting periods for the 1 april 2007 to 31 march 2008.
Even after editing the year I get the errot that the number ranges are not defined for 2008.
How should I fix both these problemshello,
Create the no ranges for the yerar 2008.
FBN1.
Regards
Ravi
Maybe you are looking for
-
Epub; it's listed but not viable
It's nice Adobe has listed epub as a digital editions export option. It is terribly unfortunate that a company proud of publishing, communications and elearning can't/doesn't provide informatin on how to make this format viable. I love InDesign, Acro
-
My whole music store is in French!
Hi! I've just updated my old iTunes and iPod to the newest version. But oh dear, the whole music store is in French and I can't understand anything. I want podcasts, English podcasts, goddamnit! If anyone could explain to me how to change the languag
-
I recently got a nice MacPro 8-core computer with 16 Megs of RAM and an NVIDIA video card. Nice huh? I though so too, until I opened the Activity Manager and saw that even during Export and rendering from FCP, the 8 processors were barely be taxed. A
-
Hello, I currently have duplicates of all the recordings in my iTunes. Why is this and how do I get rid of them? thanks
-
QuickBooks reinstallation error
QuickBooks Re-Installation "Issue Error 2718: Missing package name for product code '{9A2F0810=369F-4E86-9072-973FBE1679C5}'." Is this an MS Installer issue? After not seeing the icon for my Quickbooks I ran the install CD which would stop and give a