UOM Synchronisation across two R3 systems and one SRM system

Hi Experts,
Could you please guide me how to do synchronisation of UOM in SRM with two R3 systems as backend?
eg: EA is under ISO code A in SRM
EA is under ISO code E in ECC
EA is under ISO code R in R3
i have done synchronisation between ECC and SRM.

Similar Messages

Two SNC system and one execution system

Hi Experts
Can there be possibilty of Two snc system to co exist with one execution system ECC?
IF yes can you folks please throw some light on the same?
This situation is arising because:
the Lime table in the existing system has really grown huge and the archiving is not helping becuase there are new records that are added to the system every day which are more than the archiving records
because of this huge data the upgrade is not possible and we are planning for a new setup, now to mitigate the risk we were tryin if two SNC system can coexist with one EEC system.
Now to add to the problem is there are certain business scenarios because of which we need to put in data in lime table every day
so reduction in data input is not possible.
As the data in LIME is only stock of the customer coming every day and if we just transaction data , even if we go away with all the data is not an issue with us as customer reports his existing stock on daily basis to us.
We have even thought of truncating all the tables available in in lime objects in SARA, we are thinking of this becuase system might act erratic when we setup new system and slow try moving few customer from existing to new system. as a pilot.
Supposing if we go ahead with it ,wht could be the issues ?
Thanks for all your help and suggestions
Regards
Manas Malhotra

Hi Manas
Two SNC systems can coexist together.
You need to define seperate Business System Groups,RFC settings,Logical System definition
Also you need to have seperate Identification for your master data, create your own definition in BADI
Example:If you are sending same material XXX to two SCM systems how to diferrentiate ???
Because BADi methods EXIT_/SAPAPO/SAPLCIF_LOC_001 & EXIT_/SAPAPO/SAPLCIF_PROD_001
differentiate when two ERP systems are connected to one SNC system by prefix and sufix, now you need to have your own code to differentiate
Also big time care should be taken in defining the distrubution models (bd64) and even in XI/PI like
Example: we have two TM systems coexisting with one ERP, so we used conditoned based mapping
Itu2019s a condition based mapping.
1) When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP1 or BP2 or BP3 u2026 the receiver is I5YCLNT100
2) When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP4 or BP5u2026the Receiver is I5XCLNT100.
Also care should be taken on master data/FICO settings which both systems use in common. like using Ztypes instead of using standard one like order type, message type. It should be easy when you troubleshoot back!!!
The inbound message parameters should be taken care w.r.t business needs
Good to have a matrix mapping like what business process coexit in both systems and which doesnot and then try to see what settings need to be tailored???
Best Regards
Vinod

Evironment with two Netweaver systems and one BPC server

Hi there,
I heard it could be possible to use only one BPC microsoft server and direct one development/test netweaver system and one production NW system to exactly one BPC server?
Can I somehow define two instances on the BPC server? How about transport management?
We plan to implement BPC NW 7.0 or 7.5 if version is available in time.
Thanks in advance,
Dierk

Hello Nilanjan,
thanks for the immediate response!
I understood that you can access different BPC servers using one client. That would be achivable entering different servers withtin the connection wizard?
My question is if it would be possible to only have one physical .NET server and the dependent BPC client from where I can access two separate Netweaver servers (test/production). This would need something like a switch where the Netweaver system can be selected.
Reason is that my customer gets his servers hosted and wants to avoid to pay for two .NET servers.
To run development and production version of Netweaver on one physical system is not possible/recommended at all I heard.
Kind regards,
Dierk

How do I combine my Contacts across two email accounts into one?

Somehow my contacts got split randomly across two email accounts. One is IMAP and the other pop3. I am trying to consolidate all my contacts again under the pop3 email account. iCloud support could not understand how the mixing occurred, but I need to fix it now. Can anyone help?
Btw, I do use iCloud across my iPhone 5, iPad mini and MacBook Pro!
Thanks
Robert

Contacts are not saved by type of account so your description is confusing. No matter if you have iCloud, Google, "On My Mac", Exchange, Yahoo and AOL contacts, Mail uses them equally.
Please post a screen shot showing this separation.
Command-Shift-3 takes the entire screen
Command-Shift-4 takes a portion of the screen. <--use this one
Click on the camera icon to post.

PO No range when we ink two SRM system with One ECC system

Hello Experts,
We have a client requirement to link Two SRM Systems with One ECC system.
In this case what number range we need to maintain in both SRM systems for PO.
-The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
-We have Extended classic scenario.
-Also PO Doc type is going to be same.
Can we handle this by increasing the buffer of the number range in one of the SRM system?
Any idea...pls help urgently.
Best Regards,
Anil
Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

Hello Anil,
Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
Regards.
Laurent.

Three sender systems and one receiver

Hi Experts,
In my scenario I have three sender R/3 systems and one receiver file system.This is Idoc-XI-File bypass scenario.
Idoc can get trigerred from any one of these R/3 systems and reach the file system via XI without any mapping or routing.So I didn't touch any of the IR objects.
In ID,
I have created three business systems for three senders and one business service for receiver file system.
I have created three receiver determinations,three interface determinations and three receiver agreeements.I have created one receiver communication channel.
All the ALE configurations are correct.
The Idoc is reaching XI system when I trigger from any one of the R/3 systems but the error it is showing is <b>no receiver could be determined</b>.
Can any one of you through light on where I have done the mistake .
Regards,
Lokesh

Lokesh
Can you pls. try these two different options & let us know the result -->
Option 1.
Design this scenario as 1 Sender & 1 Receiver and check whether you are able to create the IDOC xml in Receiver System. With this atleast we can say that rest of the configuration are correct.
Option 2.
For the Receiver System, create 3 different Business Services & now map each of them with 3 Senders individually. I mean in this case also you will create 3 Rec. Determinations but now receiever is going to be different in each of them. Then in File Adapter you can actually mention the same location path.
- Lalit -

I have two apple accounts and one of which has my music on. I would like to move this music to the other account. Is there a simple way of doing this?

I have two apple accounts and one of which has my music on. I would like to move this music to the other account. Is there a simple way of doing this?

There is currently no way to merge accounts. The best option is to pick one, and use it consistantly.
HTH.

I live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the there person's iCloud?

i live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the other person's iCloud? Can they go out of my account? Their content is saved on their iPads, but can another iCloud be on the same home computer?

The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141

Is there a cable with two Apple connections and one USB connection?

Is there a cable with two Apple connections and one USB connection?

it would be possible without damage to the phones if only the charging pins was used
but it would mean the 2 phones would charge 1/2 as fast as normally

Can we use both Stand alone and Extended classic in one SRM system

Hi All,
Our client is now using Stand alone SRM system with back-end R/3 FI-CO system. Now they want to go Extended classic scenario for few product categories.
         Would it be possible to use both in one SRM system? If possible could you please provide what are the sequential steps to do this?
             Thanks in advance.
Regards,
Ram

Hi Ramesh,
How did you end up solving your problem, as i have the same scenario. Did you use this BADI (
SRM Server->Business Add-Ins->Control Extended Classic Scenario->Activate Extended Classic Scenario)? Based on my reading, it seems this BADI is relevant to switch between extended classic and classic scenarios.
From what i understand, we can control the standalone scenario via the define backend system configuration (SAP SRM -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category). In my scenario, I have one set of product categories, so i will likely need to implement this BADI (BBP_DETERMINE_LOGSYS, method:   DETERMINE_LOGSYS - SAP SRM -> SRM Server -> Business Add-Ins ->Shopping Carts and Requirement Items -> Determine Backend System / Company Code) in order to determine the correct backend system based on company/plant for example.
Did you then leave the extended classic scenario activated (IMG --> Supplier Relationship Management -> SRM Server-> Cross-Application Basic Settings->
Activate Extended Classic Scenario)?
Or how did you achieve both standalone and extended classic using one SRM server?
cheers,
AD

HT2305 I downloaded, and have two .msi files and one setupadmin.exe file. I click the latter and nothing happens?

I downloaded 2 updates (download only), and there's two .msi files and one setupadmin.exe file. I click the latter and nothing happens? How am I meant to do install these updates?

Sorry I forgot to mention I was doing this on a PC with Vista (the heading was Windows so I didn't bother to mention this). Anyway by trial and error I found that you can click on the .msi files to install them. The files were downlads of updates to iTunes and iCloud Control Panel.

Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

The normal suggestions.
Close the app,off fully. Double tap the home screen then touch and hold any of the icons on the task bar until they jiggle, then close them all off by touching the - sign.
Then reboot the pad and try the spp again. If same issue, delete the app, then reload it. ( no charge). You may just have a bad copy. If continues, write to the developer, they may need to do an update. I have an older version of the same app and it works fine.
Since yours is the ad supported version, they are maing real sure you see the ad. Is it as simple as you need to click thru the ad to get to the game?

Two Mini Mac and One Monitor

Hey everyone,
Whats the best one to do? I have two mini mac and one monitor with a WIRELESS (Bluetooth) keyboard and mouse...
Should I get a KVM or Network,etc?
Or what is the best advice for me to get?
Im using one Mini Mac for work just as Photoshop and Lightroom ONLY,
Other mini mac for play around, download, internet search,etc
both 10.4.11 BUT will get Snow Leopard soon...
1.66 Ghz Inter Core Duo
and
cant remember the other Ghz as its shut down at the moment but higher then 1.66Ghz, Inter Core Duo
Johnny

...with a WIRELESS (Bluetooth) keyboard and mouse...
Do you have a separate keyboard & mouse for the other Mac? Bluetooth keyboards and mice normally can only be paired to one device and since the Bluetooth receiver is built-in to the Macs, you normally can't attach your Bluetooth wireless keyboard/mouse to a KVM. (If you have a non-Bluetooth wireless keyboard/mouse with it's own dedicated receiver, then it's possible to use that with a USB KVM. But those are mostly PC keyboards/mice so most Mac people don't have such.)
So that basically eliminates KVM as a sharing device for you. Leaving just something like screen sharing to remote control one of the Macs. You probably will not like the way Photoshop and Lightroom work over screen sharing, so remote control just the "internet only" Mac, not the Photoshop Mac.

Connecting to Multiple ECC systems via one Gateway system(Dynamic System Selection)

Hi Experts,
We have multiple ECC systems and one Gateway server. We want to connect to these different ECC systems using one GW system.
I have created System Aliases for these ECC system in GW system. For a service, i added 2 system aliases.
Now we are looking for the solution where UI can provide the system alias (it wants to connect) as a parameter while calling oData Service.
Please help.
Regards,
Rohit

Hi Rohit,
we have a similar scenario where we have two system aliases for one service. Both aliases point to the same system, but different clients; it should not make a difference though, having different systems. The feature you are looking for is Multiple Origin Composition (MOC).
There are a couple of things you have to consider:
in the SEGW the entity to be called has to be marked as addressable
the URI of the service needs to include the tag for MOC (;mo) --> http://sapgw.domain.org:8000/sap/opu/odata/sap/ZSOME_SERVICE;mo/entityset
Without the ;mo the call will be routed to your default alias. The ;mo will route the call to both systems. Using MOC will generate an additional key property into your entities --> SAP__ORIGIN. The property is the alias. If you want to route to a specific system you have to provide the SAP__ORIGIN like providing normal key properties in your requests.
This will look like this:
<content type="application/xml">
<m:properties xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices">
    <d:SAP__Origin>SOME_ALIAS</d:SAP__Origin>
    <d:Identifier>SOME_IDENTIFIER</d:Identifier>
    <d:Doublet />
</m:properties>
</content>
The original Entity only consists of the key property "Identifier" and the property "Doublet". "SAP__ORIGN" is added via the ;mo.
Hope it helped...
Holger

Is it possible to connect multiple R/3 systems to one APO system?

Hi,
Is it possible to connect multiple R/3 systems to one APO system?
Kind regards,
Kris De Smedt.

Hi Kris,
Yes, you can connect multiple R/3 systems to one APO system. All you need to do is to maintain connection parameters of all the R/3 systems with APO. (i.e. RFC Destinations, logical systems, partner profiles etc.)
Regards,
Naveen.

UOM Synchronisation across two R3 systems and one SRM system

Similar Messages

Maybe you are looking for