Up convert and two missing files

Hello,
I'm a beginner in LabVIEW. I've started working with LabVIEW 2010. I have a measurement setup including a Dynamic Signal Analyzer for low freq. noise measurement.
I have a program created in older version of labview and I need to open it in 2010 version for measurement purposes.
There are couple of vi files in it. I already opened the main file called "UM3561B-Final.vi" through the trial version of labview 8, but I cannot open the rest because that session is already expired. There are also error messages that I receive when I run the main file and my understanding is that either Im missing two files or there are some tools in the file which are not supported by this version (2010). This is what I was told by an expert.
I'm wondering if you could help me with
1st understanding what file (inter block) I'm missing in this file so that I can create it again.
2nd How I can run other files in Labview 2010.
I attached the whole files I have.
Regards,
Attachments:
NOISE.zip ‏1814 KB

Who was this "expert"? I think they may need to reconsider that title. You have several issues. The archive you uploaded decompresses into two folders: "NOISE" and "UMHP3561". In the "NOISE" folder there is another copy of the "UMHP3561". The first issue is that the files in the "UMHP3561" folder are written in LabVIEW 5. That version is too old to open VIs in LabVIEW 10. The second issue is that the copy you have in "NOISE\UMHP3561" contains files that are written in LabVIEW 4. Again, too old to open in LabVIEW 10. You should only have one UMHP3561 folder, and whichever one you pick, you can post a request in the Upconvert Requests Thread to get the VIs updated so you can open them in LabVIEW 10.
Now, as far as the 2 individual files in the "NOISE" folder, "strip_whitespace.vi", and "UM3561B-Final.VI", I was unable to even load these, as it appears they are corrupted. Do you have a second copy?

Similar Messages

I create name plaques using TypeStyler, but my laser cutter says they must be converted into two vector files; a cut file to cut the outlines of all the letters and an "etch" to etch the letter intersect lines. Can AI convert my TypeStyler file into a cu

I create name plaques using TypeStyler, but my laser cutter says they must be converted into two vector files; a cut file to cut the outlines of all the letters and an "etch" to etch the letter intersect lines. Can AI convert my TypeStyler file into a cut file and an etch file?

Thanks. I might use it soon...
Does it automatically make folders named after the volume labels? And does it handle the conversion of spaces and non-alphanumeric characters to octal codes?
I could read the script but it would be faster for everyone reading, if you leave the answer as a reply.
I also think that there should be some major work done on modernizing the fstab, either by replacing it with a better implementation of file system mounting or changing the file structure and adding in better handling of non-alphanumerics. I don't want to have to look up a stupid octal table every time I type in my labels.

I downloaded some videos to Premier Elements 13 from external hard drive but now the external hard drive is damaged. I tried to open the videos on the organizer which it shows the video but with a yellow ? and says missing file. Is there anyway I can open

I downloaded some videos to Premier Elements 13 from an external hard drive but now the external hard drive is damaged. While setting up my new MAC the external hard drive was dropped and I have been told by an outside source they could not retrieve the files. It had 4 years of photos and videos on it. I remembered that I had downloaded some of the videos from the external hard drive (before it was broke) to Adobe Organizer 13 when I installed the Adobe 13 on my MACOS X 10.9.5. I tried to open the videos on the organizer which it shows the video but with a yellow ? and says missing file. Is there anyway I can open these videos?
Any input is greatly appreciated!! I am sick over losing the videos and had a little hope on Adobe Organizer until I was unable to open them. I am thinking it is due to my external hard drive not being plugged in. I thought when I transferred from the external hard drive to Adobe 13 that it would be there without the external hard drive needing to be attached but maybe I did something wrong.
Thanks again for any help!!!!

jnrmendonca
It had 4 years of photos and videos on it.
To what did your camera record those photos and videos - camera's internal memory, inserted memory card, other?
Any remote chance that the latter may still exist for you to use to download the camera files to your new external hard drive?
ATR

I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location?

I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location? If I use add file / folder to library, it scans the folder and then makes a copy of any file that is not in my library in the exact same location; I recal in older versions of iTunes being able to just drag my media folder into my library and it would update missing links.

Only the songs that are connected to iTunes will be copied when you consolidate to a new folder.
Splitting the media folder away from the usual location makes it harder to move iTunes in the future.
Are you go move everything back once you've tidied up or are you going to leave it that way? Either way I'd recommend you create an iTunes folder at the new location, an iTunes Media folder inside that, and consolidate to this new iTunes Media folder. You should also use the option File > LIbrary > Organize Library > Rearrange files in the folder "<Media Folder"> if you have not already done so.
tt2

TS3212 the new download of itunes will not run. I get a message during the process that I need to verify that I have sufficient privilege. then I get an error 126 and a missing file MSVCR80.dll. what can I do?

I'm trying to download the new version of itunes. durig the install i get a message that I need to verify that I have sufficient privilege. Then I get a message of a Windows error 126 and a missing file MSVCR 80.dll. I've tried everything on the support site and nothing works.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Does PSA3 SE have Catalog Recover and Reconnect Missing Files

Hi Jim Jutte and Colin Walls,
I was looking at this thread over on the PS Elements forum where the submitter seems to have some problems where he thinks that some photo files did not transfer from PSA3 SE to PSE 5.
http://www.adobeforums.com/cgi-bin/webx/.3bc1dc66
I suggest that you also look at this thread. I don't have PSA3 SE to know what functions it does or does not have. If PSA3 SE does have Catalog Recover and Reconnect Missing Files, can he go back to his PSA3 SE Catalog now and do the Reconnect Missing Files and Catalog Recover, then retry the catalog upgrade again in PSE5?

Colin,
It's been a while since I'm used any bells and whistles in Access. What is
the function called?
Cheers

How can I convert and replace SDII files to WAV files in a song?

I have to convert some audiofiles in a song from 16 to 24 bit and from SDII to WAV. I choose the option "Copy/convert files" in the audio window and everything is converted well.
In my audio window I have now 16 and 24 bit files and WAV and SDII files.
But how can I replace those new files in my song?
On logic 6.4.3 I could after "Copy/convert files" choose the option "Change file reference(s) in the song to the audiofile(s) that have been copied", but in my new Logic 7.1.1 I don't have that possibility anymore.
What am I'm doing wrong? I'm copying my new audio in new folders.
G5 dual 2,7 Mac OS X (10.4.3) Protools HD3 Accel, 192, 96i (2x)

set sample rate to original sample rate

Time Machine and Excel Missing File

Hello, this is my first posting here and I would appreciate some help.
An important Excel file of mine just disappeared both on my hard drive as well as on my Time Capsule backup, which is really puzzling me. Here are the facts:
1. I am using an iMac, running Mac OS X 10.5.8, with Excel:mac 2008 version 12.2.7. I religiously update both my OS and applications, so they are both up to date
2. Within Excel, if I go to File/Open Recent, there is a dropdown of recently opened files. The missing file is shown there but the "xlsx" tag is missing on that name, oddly. The other files (which are all still there) still have the "xls" or "xlsx" tag. When I click on that file, I get that error message that the file cannot be found
3. I then opened up my Time Machine on my Time Capsule and went scrolling back in time, and really weirdly, this file is missing in every version of backup. My Time Machine has the default backup of hourly for the past 24 hours, daily for the past month, and weekly before. I went into the folder where I kept the file all the way back to July (when I got the Time Capsule) and this file is missing from EACH backup. All other files are there.
I work on this file every day and I tend to keep it open on iMac. Usually when Excel crashes or something, it reloads with a recovered version but Excel hasn't crashed recently. I worked on this file as recently as yesterday and saved it in the same place where I've been saving it for the past several months.
OK, what's changed from yesterday to today? Last night when I updated my software there was an update from Microsoft for a security patch. Could it have detected a virus in this file and deleted this file from my hard drive and then from each and every backup in Time Machine?
The second change was that I selected "Back Up Now" for the first time on Time Machine last night after that patch. I usually had Time Machine run automatically, but while I was updating, I decided to do a forced backup. Could this forced backup have deleted all prior instances of this file if it was missing on my hard drive then?
This file is important to me, does anyone have a suggestion as to how I can retrieve it? I thought having Time Capsule would save this kind of headaches. I did a search within the backups, in case the file mysteriously "moved", but the file is just plain missing on all backups and on my hard drive. To make things worse, I Emptied my Trash last night, so I can't see if it is in there. Though, I didn't delete the file.
Thanks for any help!

NewMacxUser2010 wrote:
Hello, this is my first posting here and I would appreciate some help.
Hi, and welcome to the forums.
Could it have detected a virus in this file and deleted this file from my hard drive and then from each and every backup in Time Machine?
Seems very doubtful, especially since there are no viruses that run on OSX.
There is a small amount of malware, but you have to actively participate in getting it onto your Mac.
But . . . are you running any anti-virus software? Some of it does cause all sorts of problems on Macs.
The second change was that I selected "Back Up Now" for the first time on Time Machine last night after that patch. I usually had Time Machine run automatically, but while I was updating, I decided to do a forced backup. Could this forced backup have deleted all prior instances of this file if it was missing on my hard drive then?
No. A backup is a backup is a backup; they're all the same, no matter how they're started. And Time Machine only deletes things when it "thins" backups. Basically, it keeps all backups for 24 hours, except the first of each day, which it keeps for a month, and the first of each week, which it keeps as long as there's room.
So it's a bit unpredictable, but if a file is on your Mac for at least 24 hours, its backup will be kept for at least a month.
This file is important to me, does anyone have a suggestion as to how I can retrieve it? I thought having Time Capsule would save this kind of headaches. I did a search within the backups, in case the file mysteriously "moved", but the file is just plain missing on all backups and on my hard drive. To make things worse, I Emptied my Trash last night, so I can't see if it is in there. Though, I didn't delete the file.
I don't use Excel, so can't help much with specifics. Is it possible this is some sort of temporary file that's either never actually saved to disk, or is saved with a different name each time?
Are all your other, similar files in your backups?

Locating and reinstalling missing files in Lightroom 1.4 ....

I would like to know how to re-install missing files once you locate a missing folder or set of files, I don't understand what to do next (once you have found the files) in order to put the file back into it's original location so the files will work in Lightroom (i.e. change the "red" wording back into "white wording" in the folder column). Initially I click onto the red word and a"locate missing folder" window pops up indicating the files original location at the bottom of the window. I have tried putting that file back into it's original location but nothing changes in Lightroom.
Also I notice that the file will still be listed in the library so when I have tried to just drag that fie back into Lightroom, I am unable to because a window pops up saying the file is already in the catalog. At which point it ask me if I would like to see that file in the Library. Once I see the file in the library I have to delete it in order to re-install the original file.
EEEEKKKKKS there must be a simpler way than this just to re-locate files and make the work again ????? I have tried finding information in Adobe's support manual for Lightroom but can't seem to find the answer. I have also tried using other sources like Scott Kelby's book on Lightroom.
This seems like such an obvious problem that would occur with all users so I know I must missing or overlooking something here. I love Lightroom but this is one of the little frustrations I have with the program. I wish a better manual came with the program when I bought it......
I would appreciate any help anyone has on this topic..... Wesley Wong

function(){return A.apply(null,[this].concat($A(arguments)))}
lovetotakepics wrote:
Hi Marc:
Thank you so very much!! Your recommendation worked. I was able to do a complete search of my computer and found that LR actually stored the originals on my external HD. I was able to link the missing photos from there and I am back in business again! Thanks again for the advice......you are a lifesaver!! Still learning the ins and outs of LR, but I'm getting there.
Glad to hear it all worked out !

Is there an easy way to convert and import MTS files from a external hardrive so that I can edit them in FCP?

I am trying to convert game footage that is in MTS format to something that I can edit into a quick highlights video. I have final cut express and the standard IMovie '09. looking for easiest solution, everything seems to involve using one application to convert to Quicktime and then dropping file into Iphoto etc. is there an easy way?

I'm not completely sure that MPEG Streamclip can convert AVCHD footage (.mts files). If MPEG Streamclip doesn't do the job, then get a copy of Clipwrap, which was designed for transcoding .mts files to QuickTime/Apple Intermediate Codec (that's the format/codec you need to convert the .mts files to for use in FCE).

After Effects CS4 - Rendering and Locating Missing Files/Reconnecting Media

I am needing to do the following and unfamiliar as I am new to CS 4:
1. Rendering
2. Locating a missing file/reconnecting media
Thanks,
"scubakgd"

Basics of Rendering and Exporting
Importing and Organizing Footage Items
Mylenium

I'm really annoyed! I've tried over and over to convert and email my file from pdf to word. this is useless and a waste of $30. I need a refund.

I need to get my refund today, since I probably lost a job opportunity because they need my documents in WORD. Not PDF. This sucks and I want my money back

Hi rivera302014,
I can understand your frustration. I am happy to cancel your subscription and process a refund.
(Can I help you get those documents converted before I do so? If you're comfortable sending them to me, I'll send you a private message with details on how to get them to me. I would happy to convert them and send them back--and delete your files from my system once I do.)
Please let me know how you'd like me to proceed.
Best,
Sara

Save error and subsequently missing file - CS3

Trying to save a psd file, an error message states "could not save, "filename" is not a valid file name". This is a file we already had created and successfully saved to, several times prior. There are no forbidden characters in the file and the complete file name, including path, is under the maximum allowed characters. We did a save-as on the file and named it to "filename"2, then it saved, but the original file was no longer in the folder. That concerns me quite a bit. Anyone have any insight as to what might cause that?
Thanks!!!
Our system:
Vista 64, 4gigs of ram, 2 1TB hard drives with lots of free space and defragged weekly.
PS CS3, ram levels set to about 75%, 25 history states and cache levels set to 5.

but the original file was no longer in the folder. That concerns me quite a bit.
Are those drives external drives? If so, the specific sequence how data is saved on such drives might explain it. Other than that the usual - permission issues, virus scanners, indexing tools... Hard to tell.
Mylenium

How to convert and import MTS files from my Sony NEX 10e into iMovie for editing?

Hi, dear all,
I have hard time to bring in my footage shoot using Sony NEX 10e camcorder into iMovie 11 for editing. Is there anyway I can convert these MTS files foe editing in IMovie 11?
Thanks in advance!!
Kevin

Some frame rates and resolution combos will not import into iMovie directly. That's true. For instance, 1920x1080 @ 60 progressive frames per second (meaning not interlaced), that is not compatible with iMovie and you might need to convert it using a program like ClipWrap. Also if you have just the 'bare' .mts files, iMovie will not be able to import those either. iMovie expects to find all the folders and auxiliiary files recorded onto the memory card when you shoot AVCHD video. It needs all those extra pieces to navigate to the video clips and subsequently convert them from .mts to Apple Intermediate Codec. So in the case where you have a 'bare' .mts file use Voltaic HD to do the conversion.

Burn Folder Appearance and two strange file names

Dumb questions here, but I have to ask:
1. Where did this Burn Folder come from? I do not remember setting it up. What it a key stroke or something else I did? How do I get rid of it off my desktop?
2. 245827111.asx.asf and 245827111.ram - These two files just appeared on my desktop. Can anyone help me understand how this happened? What are they? What did I install?

#1- Burn folders are created if you insert a blank CD/DVD except when responding to a pre-initiated burn request (like pressing the burn button in iTunes)
#2- They may be "anchors" (don't know what else to call them) for streaming media files. If you clicked on a streaming video link, it is likely that those files-usually about 4KB were downloaded at that time, normally they are removed once the stream is played. If they're not, delete them yourself.
FYI-.ram is extension for RealPlayer files. .asf.asx is Advanced Streaming Format

Up convert and two missing files

Similar Messages

Maybe you are looking for