Up date download loan problem

I just recently attempted to up date my software via Blackberry manager and and the download failed. Each time I establish a new connection with BB manager it tries to up date my phone software but fails. How may I cancel the download?

You don't use the code again, you should find ML in the Purchaes pane of the App Store. Also, you should repair the hard drive before trying to download again:
http://pondini.org/OSX/DU6.html

Similar Messages

Mobile DSD data download issue : "/DSD/ME_DDR_STAT" status on error

Hello All,
DSD Backend scenarios are working fine. We had sent all the master data and shipment IDOC's to the DSD connector and we see the data in the DSD connector tables. In the Mobile DSD application we are having problems in getting the data downloaded to the Nobile client. we noticed that afer the shipment creation in backend the status on the table "/DSD/ME_DDR_STAT" goes to the following status:
DATA_STATUS - N
TRANDAT_STATUS - S
PRCDAT_STATUS - N
and when we try to do a sync from the mobile device it says the
synchronization is completed successfully but the status on the table
changes to Error as mentioned below:
DATA_STATUS - E
TRANDAT_STATUS - S
PRCDAT_STATUS - E
We are not sure what is the issue. We had successfully implemented the
Pricing BADI and also did all the configuration that are related to the
DSD Pricing .
We had implemented the OSS note "1287227 - Price date status E
in /DSD/ME_DDR_STAT set incorrectly". Still the issue exists.
Any suggestions why the status is changing to Error and Master data is
not getting downloaded in to the MI Client.
We are at SP13 and I am using MI client for SP13 with path level 1 for SP 13.
Thanks for your help in advance.
Thanks,
Greetson

Dear Greetson,
This generolly happens if there is some problem in the Pricing Data.
Please disable all the Sync Bo releated to pricing and again create a tour .....
check whether u are getting the required result.
Also check TRX: SLG1
I will try to update the thread if i could find something more useful for you.
Regards,
Akhil...
Edited by: Akhil Rastogi on Jan 30, 2009 10:31 PM

Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID:        49
INFO:iMPACT - Vendor ID:             01
INFO:iMPACT - Device Code:           18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time =    814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank you

Hi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the  same configuration problem, I want to consult  you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.

Report data download to excel file

Hi experts,
My requirement is report data download to excel file and that file should be an attachment to send email to specified people.
first i want to to download data to excel file and that file should be an attachment.
Regards
V.Venu

Hi venu,
Before posting the question, just search for the related query, more number of post has been posted related to your query,
any ways check this below links, it will solve your problem.
<<linkfarm removed>>
Cheers
NZAB
Edited by: kishan P on Jan 10, 2012 4:51 PM

Configuration data download to FPGA was not successful.

I have designed a board with the Spartan 6 LX9 TQFP144 Package.
I am able to load a bitstream to the device with the digilent HS-2. However the fpga can not selfconfigure from
the attached SPI Flash.
Here is the console output from iMPACT:
GUI --- Auto connect to cable...
INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4
INFO:iMPACT - Digilent Plugin: found 1 device(s).
INFO:iMPACT - Digilent Plugin: opening device: "JtagHs2", SN:210249983579
INFO:iMPACT - Digilent Plugin: User Name: JtagHs2
INFO:iMPACT - Digilent Plugin: Product Name: Digilent JTAG-HS2
INFO:iMPACT - Digilent Plugin: Serial Number: 210249983579
INFO:iMPACT - Digilent Plugin: Product ID: 30900152
INFO:iMPACT - Digilent Plugin: Firmware Version: 0109
INFO:iMPACT - Digilent Plugin: JTAG Port Number: 0
INFO:iMPACT - Digilent Plugin: JTAG Clock Frequency: 10000000 Hz
Attempting to identify devices in the boundary-scan chain configuration...
INFO:iMPACT - Current time: 27.07.2015 16:19:26
PROGRESS_START - Starting Operation.
Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc6slx9, Version : 2
INFO:iMPACT:1777 -
Reading C:/Xilinx/ISE/14.7/ISE_DS/ISE/spartan6/data/xc6slx9.bsd...
INFO:iMPACT:501 - '1': Added Device xc6slx9 successfully.
done.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
Selected part: N25Q128
Unprotect sectors: FALSE
INFO:iMPACT - Current time: 27.07.2015 16:20:19
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 25000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': SPI access core not detected. SPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file C:/Xilinx/ISE/14.7/ISE_DS/ISE/spartan6/data/xc6slx9_spi.cor.
'1': Downloading core...
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
'1': Reading status register contents...
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1100 1110 1100
INFO:iMPACT:2492 - '1': Completed downloading core to device.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
'1': Erasing Device.
'1': Using Sector Erase.
'1': Programming Flash.
'1': Reading device contents...
done.
'1': Verification completed.
'1':Programming in x4 mode.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
INFO:iMPACT - '1': Flash was not programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 78 sec.
If i read that correctly Data was written to the Flash but the fpga was not able to configure from that data.
Done-pin is connected to 3.3V via a 470 Ohms Resisor.
The Flash is a N25Q128A13ESE40G, Datasheet here: http://www.farnell.com/datasheets/1674445.pdf
I can perform a readback, checksum and an erase.
If i do a read device status this is the console output:
INFO:iMPACT - Current time: 27.07.2015 16:36:27
Maximum TCK operating frequency for this device chain: 25000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
INFO:iMPACT - '1': Reloading FPGA configuration data stored in flash...
INFO:iMPACT:182 - done.
On the Flash side I have pulled s# and Hold up to 3.3V with 100k Resistors.
Can someone help me to find the problem?

So does the FPGA try to read the SPI flash when it boots ?
out with scope, probe the clock and the data , see if you can see it streamig out when you boot.
If so, then one other thing I see wrong a few times is data path of the SPI, single bit or 4 bits of data.
you have to make certain the bit file was created in the same width as the fgpa is expecting,
In ISE I think its in Impact where you make the SPI flash file and specify this .

Cyber Duck killed my Canon DPP Lens Data Downloads?

I run a programme called DPP, Digital Photo Professional, which was working fine and I was able to download 'lens data' for this program.
I then tried out Cyber Duck for some FTP transfers which went OK on my MBP.
But now I find that although Mail and Safari work fine, the data download for DPP no longer works, all I get is 'unable to connect to server'.
My MacMini has a copy of DPP on it and that is still able to download lens data, but I have not run Cyber Duck on that machine as yet.
Even if I reinstall DPP it remains the same reporting 'unable to connect to server'.
I tried contacting Cyber Duck who just bumped me off as it was a 'third party problem', which was not particularly very helpful of them.
So I am now at a loss what to do.
It would seem to point to something that may have been altered by using Cyber Duck, but what I do not know. All the internet connections seem to be correct as far as I can tell.
Anyone have any idea what could have been changed to give me this problem?
Many thanks for any help.

I rolled my system back to a clone that I made before I downloaded and used Cyberduck.
DPP is now able to download its Lens Data. So it would appear that Cyberduck does alter something which breaks DPP and stops it from connecting to the Lens Data server.

Extremely slow internet data downloading

I have 2 other older Macs connected to my LAN both of which access the internet at normal speed. My new Mac mini pings addresses at the same rate as the other Macs but data download speed is extremely slow. Has anybody had this problem?

Define extremely slow.
Start with the basics:
1. System Preferences -> Network -> Network Port Configurations.
Uncheck all the boxes except the method you use to connect to the network (airport checked if you are wireless, or Built-in ethernet if you are wired)
2. System Preferences - Network -> Airport (or Built-in Ethernet depending on step 1.) -> TCP/IP -> Configure IPv6
Change selection to OFF
Under DNS (Optional Box) you may wish to manually enter in the IP addresses of your Service Providers DNS servers.
3. Because you have older Macs with an older selection of LAN hardware to access the internet you may want to see what the speed and duplex settings are on your box (access switch, broadband router, hub) and match those settings on your Built-in Ethernet if you are using that instead of Airport.
4. If you are wired, switch cables with one of the older Macs.
That should be a start.
Jan J.

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Is there a way of showing more info than just the title and author for books in my iPad "library", say date downloaded, or date last read, eg ?

Sometimes I forget the title of a book I am currently reading, and have to check through each book in my long list of titles in my "library" to find it again. I cant see any way of adding any additional information to each title (and author), like date downloaded, or date last read, which would help me find a particular book again quickly.
I may be missing something simple, so can anyone please help?
Thanks in advance.

Sometimes I forget the title of a book I am currently reading, and have to check through each book in my long list of titles in my "library" to find it again. I cant see any way of adding any additional information to each title (and author), like date downloaded, or date last read, which would help me find a particular book again quickly.
I may be missing something simple, so can anyone please help?
Thanks in advance.

Hello - downloading app problems - this phone can only be usedto download apps in uk or something - think i am linking to the us apps - how do i link to the uk apps?

hello - downloading app problems - this phone can only be usedto download apps in uk or something - think i am linking to the us apps - how do i link to the uk apps?
ta

You're welocme
Depending on the size of the app or the connection speed when using Wi-Fi it could take a little longer to download. You can also try to download it onto your computer, might be faster, and sync it to the phone after that.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

Jonas,
I think what you want is a 3D plot of a cylinder. I have attached an example using a parametric 3D plot.
You will probably want to duplicate the points for the first theta value to close the cylinder. I'm not sure what properties of the graph can be manipulated to make it easier to see.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
Cylinder_Plot_3D.vi ‏76 KB

Supplier Data Download

Hi All,
I am facing a strange issue. I have forecast in D1 and D2 in Demantra DM. This published to ASCP.
ASCP runs with D1,D2 and M1 organization where M1 is central purchasing. All the demand from D1 and D2 is fulfilled in M1.
Dependent demand from M1 is fulfilled with Purchase Orders to Suppliers.
When I download this data to Demantra RTSOP, I am getting all null records for D1 and D2.
There is not data for M1.
Request your help in investigating this. Is this expected behavior or there is some issue in data download?

Hi,
There would be some issue in the data download. Check workflow status and perform proper analysis.
Regards,
Saidaiah

Moving Calendar to a New Computer & Moving Data: Downloads and Add-ons

Moving Calendar to a New Computer & Moving Data: Downloads and Add-ons
The handle says is all. Totally lost here & in a virtual house of cards. Please first see screen-shot.
I have the Mozilla calendar (Lightening?) program on my computer. Is this screen-shot Thunderbird or is it an add-on called Lightening that was added on to Thunderbird? I don't even recall how I acquired in a few years ago. Whatever it is I find in invaluable. Indispensable. Brilliantly conceived. A superb creation.
Notice that I have several calendars in different colors for different purposes and a long task agenda on the right. Wonderful program!! I absolutely love it! I can not afford to loose these calenders and this data. However, big caveat, entrusting my life (our lives) to it has become extremely dangerous for it's a virtual house of cards upon the purchase of a new computer. The move-over is more like a career most of us already have one. Need anyone really wonder why PC sales are down? Res ipsa loquitur.
FIRST ISSUE:
I must move this/these Mozilla program/s and calendars over to the new computer but I don't have a clue where to begin. What must I download? Thunderbird? What must I add-on? Lightening? Is this a suite of programs? All I care about are my calendars and task agendas that you see in the screen-shot -- not any email programs etc. Just this personal management system that you see.
SECOND ISSUE:
After I downloading, installing, and adding-on what I need, how do I then move (migrate) my profile (data) over to new computer?
Please know that I do know where that 'profile' and its .ics calendar profiles are stored. I am also well backed up. I just need to know how get (downloaded/install) what I need and move this over to the new computer. (See screen-shot)
First, what must I download and install and add on. Second how do I move this data/profile (a virtual Life) over to the new computer without it all coming down like a house of cards?
Please, unless it's all been documented in one location, a link to this and a link to that probably won't be very helpful. Anyone who can lay-out a simple, easy to follow plan (1, 2, 3, 4, done) will be a hero and make a significant contribution to people who dread buying a new computer for precisely these reasons. It will certainly encourage more people to use this absolutely wonderful personal management system. It's the best I've ever seen and I must keep it. But it's soooo risky.

Obviously the screen-shot is posted so show what I see now and want to see when I am done. Was the ''really ''not clear? Nothing could be more germane ("Germaine" is a person's name) than a visual that shows the multiple calendar dynamic and what I actually want to see nor better communicants the fact that all I want is that and not other programs in a suite – a question btw asked but not answered.
"I have no idea what the threshold issue is. Perhaps Zeno can assist you."
I now see Zeno's reply but I never got an email re: my questions and just noticed it. I will respond to him separately. But ''obviously ''the ''''threshold'''' issue is ISSUE ONE (1) exactly what, and only what, must I download and install.
Was that really not clear? That was not answered in your first reply. And since you here, later, state that Lightening does not need to be downloaded and installed how on earth could you presume the first threshold issue (question 1) was a joke?
Once again I wrote and you even quoted me “Please, unless it's ALL been documented in ONE LOCATION, a link to this and a link to that probably won't be very helpful. Anyone who can lay-out a simple, easy to follow plan (1, 2, 3, 4, done) ...”
As this exchange demonstrates, that statement has certainly proven to be correct.
You then wrote, “Read the question... the question is. How do I move my profile to a new computer? You are the one making much more of it than that. ... All covered in the link.”
What “the” (singular) of several links (plural) you provided are you talking abut? But no matter. No it was not "all" covered in the multiple links you sent which do not address the more important threshold question (1). The only issue you addressed was (2) data transfer which is secondary to the threshold issue which is ISSUE question one (1). Threshold issue/question presented: before we can go to question (2) we must address question (1).
As I stated “Please know that I do know where that 'profile' and its .ics calendar profiles are stored.”
You replied “No you do not. Local calendars are not stored in ICS files.”
First please notice you make no attempt to clarify where they are; but, once again, please read carefully. I did not say that the calendars are “stored in the ICS files” but that the .ics files ARE the calendars and I do know there they are stored.
Please see the screen-shot you claim is not germane? Each of those different colored calendars are (“not stored” in but are) .ics files that are stored in the Profile directory. In the directory c:\Users\myName\AppData\Roaming\Thunderbird is a directory or folder called \Profiles and in that directory is a file named 9w2ydrc4.default. That file IS the profile. In that profile is a folder called “calendar-data” and in that folder are the calender .ics files that are the different colored calenders you see in the very germane screen-shot. So I do know where the calendars are. So I gather that all I copy into the Profiles directory is the file (profile) called 9w2ydrc4.default.
Again, as I wrote before, I do not want a full suite with email. So what do I downloaded and install to get only what you see in the screen-shot. I don't think we ever installed a full suite before. I never saw and email program. So, again,'' asked but not answered. ''
Then you stated, I do not need to download and install Lightening (please notice, is a partial answer to my first, threshold, question you presumed was a joke) but only Thunderbird since “Lightning is already in your profile so will move with it When you actually move the profile.”
Well, since you like to use links, exactly what is your documented Mozilla authority for that hearsay? Since I posted the question I have spent much time at Mozilla. Literally everything I have seen indicates I must first download and Thunderbird. But again, I do not want to and never did, install a full suite of programs and, as far as I know, there is no Mozilla mail or other suite programs on this (my current old computer) and there never were. So, once again'', asked and not answered).''
Everything at Mozilla states I must first download & install Thunderbird'' and then ''add-on Lightening. Nothing I have seen at Mozilla suggests otherwise or states that when we want to get Mozilla calendars over to a new computer we must first and *only* download and install Thunderbird and then just copy the profile (9w2ydrc4.default) into the 'Profiles' directory. Nothing I have seen at Mozilla suggests I do not have to download and install Lightening. So please show me where Mozilla documents that. ''' Please notice that even Zeno states, “You download AND INSTALL LIGHTNING as an add-on.'''”
Since this contradicts you do tell me: what is your Mozilla authority for claim that I do not need to download and install Lightening because it's already in my profile? I see nothing in my profile that suggests Lightening is there.
Finally, I wrote to you “ ...it is axiomatic that Windows transfer wizard does NOT transfer programs but only data. You did not know this?” I only wrote that because it appeared your reference to Transfer Wizard was a response to the threshold question of (1) how to I get the program onto the new machine. But your response is''' very '''strange for you wrote “You are the first person I have encountered that thought it did more than transfer data.” Show me where I said that. I said the opposite. How on earth did you come to that interpretation as a response to my simple and very clear statement that " ...it is axiomatic that Windows transfer wizard does''' NOT transfer programs but only data.'''.”

Having issues with picture messaging get told to go to settings, then general, then network then cellular data network. my problem is there is no such option my phone is a 3gs

having issues with MMS messaging instruction for setup, are to gotto settings, then general, then network then cellular data network.My problem is there is no cellular data network optiion on this page have tried resetting phone , no good .Help.

That option does not exist depending on who the carrier is.
Who is the carrier? Are they a supported carrier?
Have you tried Settings > General > Reset > Reset Network Settings?

Flash plugin downloading location problem

Well, like alot of people - I've had problems ever since I
installed Flash player 9. I tried out different browsers, but none
would work, only on safari. I later found out why my videos got
stuck and the browser died having me to restart for it to function
properly. There is a new plug in that has been made for Firefox 2.0
(I'm not sure about the other browsers, since I've decided to stick
with 2.0)
This is the site:
http://kb.mozillazine.org/Flash
Note this paragraph:
quote:
Starting with Flash 9.0.r45 the Flash plugin installer for
Firefox and other Mozilla-based browsers no longer copies files to
the browser plugins folder and, instead, adds the needed plugin
files NPSWF32.dll flashplayer.xpt and other related files to the
C:\WINDOWS\SYSTEM32\Macromed\Flash folder and adds a Windows
registry entry that enables each browser to detect Flash via plugin
scanning using a PLID scan
Hope that should solve your problems.
Well anyway, my problem is, I did the above thing^ but since
I had Opera installed before, whenever I uninstall and re-install
Flash, it always gets stored in the opera folder even though Its
deleted.
This is what happens when i install the plugin:
http://i110.photobucket.com/albums/n107/uboatfanatic/oo.jpg
Can someone tell me how I can change the location to Firefox?
thanks alot.

Try to "disable the hardware acceleration" in the Flash Player.
*http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
See also:
*https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
Flash "Display settings" window:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
*https://support.mozilla.org/kb/flash-113-crashes

Up date download loan problem

Similar Messages

Maybe you are looking for