Up date on last question

All the sideshows are working, it's just the original stuff that's not, like the banner and the spry bar, I think it's got something to do with the main CSS file not linking to them, how do you reconnect a main CSS file once you have put the page/s one folder deeper. Please refer to my last question

Please refer to my last question
Avoid creating new discussions when this new post is a continuation of the previous discussion. Gets confusing and disjointed quickly otherwise.
Much better if you keep everything in one spot and reply to your own post with a follow up post in the same (previous) discussion until the previous discussion is answered.

Similar Messages

New firmware m1217nfw release date and other questions ...

Hi everybody!
Does anybody knows when a new firmware update will be released? It seems that the latest release (2013-09-30, version 20130912) has a serious known issue and HP recommends : "Please do not update with this version" on the web site ...
The problem is that the version installed on my printer (version 20130211) seems to have a potential security vulnerability. The vulnerability could be exploited remotely to gain unauthorized access to
data! An intermediate firmware version (2013-07-26, version 20130703) was previously released to correct this issue but I can't find it on hp web site. Does anybody knows where I can find it???
My last question is about firmware update : HP recommends to update firmware by using an USB 2.0 cable connected to the printer. I successfully updated the firmware (twice) with the network interface of the printer. Should I avoid this method and use an USB 2.0 cable?
Thanks in advance for your reply.

You can't.
They did this for a reason, as part of FairPlay.
There's no way to get around this.....
If the information on the purchase content is wrong (like wrong release date), contact Apple, and they might be able to correct it.
Message was edited by: Kento Ito

One last question about Apple IDs

I thought id asked the lot but there is one last question. How does one delete an Apple ID?
Many thanks again
Anthony

Hello Again Anthony!
"How does one delete an Apple ID?"
You can't.
After you quit using an account, it's posts, will be archived. What that means is, that if there are no additional responses in the Threads they reside in, the Topics will get continually pushed down on the Topics list. After a certain amount of time, maybe 2 to 6 months, the Threads will be locked, so no responses can be entered. But the Threads will not disappear.
Threads in heavily trafficked Forums, may be archived more rapidly than those in areas, with less activity.
The Topics that you started using the account, will show your the Alias, in the Author field of a main forum page, but eventually, readers will have to keep going to the succeeding pages to view them.
If someone were to do a Discussions Search, using these parameters:
Restrict by Category or Forum: All Categories
Restrict by Date Range: All
Restrict by Username: Your Old Alias
all of your posts, created since about 11/13/05, would be found.
ali b

Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

Canon HG20 One Last Question

Before I buy my Canon HG20, I have one last question.
I have seen warnings various places on the net about having a powerful enough computer to work with the data produced by this camera.
I have an iMac 24 2.16 2GHz Intel Core 2 Duo with 2 MHz Memory, NVIDIA GeForce 7300 card, running OS X 10.5.6 with FCE 4.0.1.
Am I OK?
Thanks,
Jim

That is a perfect machine for AVCHD editing. i use a puny Macbook and I have experienced no problems, everything is very fast. To work with AVCHD, you need an Intel processor and to have at least FCE4. 2GB of RAM is also a good idea to have (I assume that's what you meant you had when you said you had "2 MHz Memory"). From what you have said of your specs, I can't foresee any problems. If a Macbook can do it well, you can expect an iMac to do it amazingly.
Enjoy your new camcorder, I definitely am pleased with my HG21 (basically the same thing, just more memory and a viewfinder).
Message was edited by: skalicki`

Loading data of last three years via initial load

Hi All,
We are having one requirement. We have to load data of last three years from source to target via initial load.
most of the table(s) are not having timestamp column.
Please suggest some process to get this done.
Thanks
Kamlesh

This question doesn't seem to have anything to do with GoldenGate, does it? Assuming the source & target are both the same DB vendor (ie, both Oracle), then there is no reason to use GG for the initial load. (But trying to figure out how to get the last 3 years data without timestamps will be an interesting challenge, in any case. Not sure which forum is best to answer that question.)

Report of Total GR qty/IR qty,date when last GR was passed (latest one)

Dear all
Kindly let me know how to get the below report using input of PO no:
Report of Total GR qty,IR qty,date when last GR was passed (latest one),date when last IR was passed (latest one)
Standard t.code such as ME2n.me2l is not giving the above report.

Dear
Try ME80FN and ME2N/L with the setting with Selection Parameters
regds
dev...!

No dates in Last Modified Date or Added Date

Hello.
Due to some issues with our servers i'm unable to make any SR's so i hope to recive some answers here instead while that issue gets resolved.
When looking in the colums "Added Date" and "Last Modified Date" certain activites have no dates there. When attempting to filter all the activities with a filter "Added Date Equals 'Blank' " ie all aktivites who do not have a date in Added Date, the results are 0 activites. I interpret this as the fields are not empty but for some reason the information is not displayed.

781070 wrote:
Hello.
Due to some issues with our servers i'm unable to make any SR's so i hope to recive some answers here instead while that issue gets resolved.
When looking in the colums "Added Date" and "Last Modified Date" certain activites have no dates there. When attempting to filter all the activities with a filter "Added Date Equals 'Blank' " ie all aktivites who do not have a date in Added Date, the results are 0 activites. I interpret this as the fields are not empty but for some reason the information is not displayed.As far back as I can remember, filtering by either of those fields has never worked.
There are a number of reasons why the last modified or added date could be blank.

First date and last date of current year

Hi
how can i get first and last date of current year, thanks for your help

hi,
use FM......... FIRST_AND_LAST_DAY_IN_YEAR_GET
DATA: first LIKE sy-datum,
      last LIKE sy-datum.
CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
EXPORTING
    i_gjahr     = '2007'
    i_periv     = '24'
IMPORTING
    e_first_day = first
    e_last_day = last.
WRITE: / 'First Date', first, '    Last Date', last.
Regards
CNU

Show data of last day of previous month against any day of current month

Hi,
I have fact table which contains data at date level (we have data for oct-2009 to april-2010). Our requirement is to show data of last day of previous month against any day of current month in obiee 11g. I am facing problem in Feb 2010 its picking data of 28-Jan-2010 instead of 31-jan-2010 and for April its picking data of 30-mar-2010 instead of 31-mar -2010.
Any suggestion ???

You're asking to filter your data set to only include rows between:
1) last day of the previous month
2) any day of the current month
This can be achieved with prompting in OBIEE Answers.
last day of previous month = TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) . The problem is you need to make query work within Oracle's Answer syntax.
In the prompt, select the operator type for your date dimension as 'between' and default to 'SQL Results'.
For the 'last day of previous month' , use the query:
SELECT
case when 1=0 then Time."Fiscal Date" else TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))
end
FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
For the current date, use the query:
SELECT
case when 1=0 then Time."Fiscal Date" else CURRENT_DATE
end
FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
Another option is to create a last_date_pervious_month variable in the RPD and have that as the default value in your prompt.

CG02 Date of Last Change to Specification As a Whole

Date of Last Change to Specification As a Whole
Specification (CG02) Administration Data (at the specification header)
reports Whole Specification changed by and changed on.
Performance Assistant (Help) on Whole Specification Changed On reports:
Date of Last Change to Specification As a Whole
Key date on which the specification was last changed.
Except for changes to the header data, the system takes all data that
relates to the specification into account, such as changes to:
Identifiers
Assignments of regulatory lists
Value assignments
Components
User-defined texts
Notes
The key date is specified when the specification workbench is started.
It
is not necessarily the same as the current date.
To determine the date of the last change to the specification in a
customer-defined program you can read out the specification time stamp
using function module EHSB_TMSTMB_READ_TIMESTAMPS, or you can follow
the
instructions in SAP note 874191.
The date of the last change to the specification is always set to the
key
date on which the specification was last processed. This is not always
the date of the last change to the specification (see SAP Note 874191).
We are not able to 1) find SAP Note 874191 or function module
EHSB_TMSTMB_READ_TIMESTAMPS

Dear Richard
you topic is quite old. Many SAP EHS users do have problems with this. This content in EHS gives rise to a lot of trouble with the end users (according to my experience) especially in the context of "change docs" etc.
Check may be as well:
EHSB_TMSTMP_READ_TIMESTAMPS - Function - ABAP - SAP
Check as well:
Evaluation of specification changes
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/H-$PLMB$SPC_UPDDATS
C.B:

Regarding the date of last change in sales order...

Hi,
Can anyone help me in the scenario...
I have to pick the date of last change in sales order...whether it is done on Configuration items ,additional data B or on the ordered quantity...
the problem is that it has some customized fields that are included in VBAK....
So i need help regarding this...shud i have to writ a user exit for this....or i hv to do a change in USEREXIT_SAVE_DOCUMENT .
Plz help me..
Edited by: Amit Gupta on May 1, 2008 3:02 PM

VBAK-AEDAT will be updated, evenIf you have your custom fields in Sales Order.
Regards,
Naimesh Patel

Batch classification "Date of last goods receipt" is "00.00.0000"

Dear all,
I have configured all steps for batch determination for FIFO.
It worked fine for IM (stock transfer - mov.type 301) on last friday, however, get the issue today:
- After I do GR (mov.type 101), the batch is auto created, batch classification is created,
I use MSC2N to view batch classification:
the value of "Date of last goods receipt" is "00.00.0000"
What is wrong with my configuration?
Could you pls help me to fix this?
Thanl you very much for you help!
Edited by: Ngo Quoc Hung on Dec 13, 2010 10:59 AM

System Updates Batch Data in the Batch Master Record in the Following ways :
1) If the batch does not yet exist for the plant, it is automatically created.
2) If the batch already exists for the plant, the new quantity is simply posted as a receipt in the specified storage location.
When posting a goods receipt with reference to Purchase order, the system updates Posting date as the goods receipt date in general data of the batch.

Terms of Payment to determine due date as last date of the month

Hi Experts,
Does any one know how to configure a Terms of Payment to determine due date as last date of the month ?
I tried by puting fixed date as 31 in the Terms of Payment in FI but when I am creating in FI-CA it gives me an error "_Term of payment Z003 is inconsistent/not planned_"
Please advice.
Thanks & Regards
Satyajeet

Hi Satyajeet,
It seems the settings that you have maintained in FI are correct.
When you are assigning the payment terms in FI-CA, you need to assign a factory calendar as well to the payment terms in the following config-
IMG->Financial Accounting ->Contract Accounts Receivable and Payable->Postings and Documents->Document->Maintain Payment Terms
If you have already assigned the factory calendar and still the problem persists, can you give the message ID and the message number of the error that you are getting?
Thanks,
Amlan

Date of last sale for a Material

Hello all,
Is there a place where SAP stores date of Last Sale for a Material ? I am looking for an info structure, where SAP stores date of Last sale for each material and keeps on updating that, for each transaction.
I know that I could get it from VBAK, or VAPMA (If I need to get it plant wise), but to read all the orders, and find one with the highest AUDAT is giving very poor performance. Select MAX and for all entries dont work together.. so system is dying doing this select..
Is there a straight forward way of doing it ?
S032-LETZTABG gives date of Last Issue, but we have stock transfers, intercompany...and so many other stuffs.. so an issue may not necessary be a sale. So that also dont help..
appreciate your inputs.
Thanks

Srinath,
VAPMA or VRPMA --- either stores all transaction document numbers -- VAPMA stores orders, and VRPMA stores Billing docs.
Hence reading from these tables to get date of last sale is bringing the system down...
What am wondering is whether there is a table at more master data level, say, at Material and plant level, and just store the date of latest sale against Material.
I prefer VAPMA over VRPMA for 2 reasons.
1. I need the result in a plant level.. VRPMA dont have WERKS whereas VAPMA do.
2. I need to grab even the latest sales order created - Even though it is not yet delivered/invoiced... VRPMA will have it only after billing..
Looks like, SAP is not storing date of last sale anywhere.

Up date on last question

Similar Messages

Maybe you are looking for