Up gradation from CRM 4.0 to CRM 7.0

Hi
We are using CRM 4.0 now over client wants upgrade to CRM 7.0
What are the settings we have to do
Please give me your suggestion to me that will help full to me
Thanks in Advance
Kumar

Hi,
Please refer the following link: https://websmp207.sap-ag.de/upgrade-crm.
This will have all the details.
Regards,
Krishna

Similar Messages

User provisioning problem from OIM 10g to Siebel CRM

Hi Team,
I am facing User provisioning problem from OIM 10g to Siebel CRM.Please find the log details.
Running Get Attribute Mapping
Running Siebel Create User
<com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException>
        at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
        at com.siebel.om.conmgr.Connection.run(Connection.java:286)
        at java.lang.Thread.run(Thread.java:619)
[CMGR FATAL] Error: <com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException> connection:1
<com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException>
        at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
        at com.siebel.om.conmgr.Connection.run(Connection.java:286)
        at java.lang.Thread.run(Thread.java:619)
[CMGR FATAL] Error: <com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException> connection:1ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.utils.SiebelConnection : createSiebelConnection() : Siebel Connection Exception:Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.proxy.SiebelProxyEmployeeProvisionManager : createSiebelConnection() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.provision.SiebelUtilEmployeeProvisionManager : createEmployee() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
Regards,
Ravi.

Hi
I facing the same error message as yours, using OIM 11g R2
Are you able solve it ?
Please share
Many Thanks !!!

Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

Hello together,
The system of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
In the Billing Due List a dump occurs when clicking on an item and then on conditions
Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
(Other classes are new generated after the upgrade)
During the Analysis we looked to the billing engine navigator:
In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
BR, Anne

Hi Nawanit,
we checked the key figure settings and categories. Everything is maintained correctly.
Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
"Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
As far as we work with ECC 6.0, EHP4 this message makes no sense.
Does anyone have another idea?
Thanks
Jan

Header and Item Text is not replicating from ECC6.0 to SAP CRM 7.0

Hi SAP Experts,
When the text is added at header and item in Texts tab from SAP CRM then this is transferring into ECC6.0 but the otherway round is not working i.e., from ECC6.0 to SAP CRM.
Would appreciate for giving solution.
Thanks in advance.
Best Regards
Succhi

Hi Succhi
There are a number of oss notes to check: 1169856, 720147, 550343, and 549209
Please make sure that the text tables are included in the filter as per note 720147.
Also include the configuration as per note 549209.
It is necessary that the same text types exist in both systems so please review the configuration carefully.
I hop this helps.
Best Regards
Gavin

Link from BOBJ Webi report to CRM webUI screen

Hi experts,
I was wondering, if there's a way to create a link from Webi report (based on CRM data) to webUI content in CRM? For example, Webi report will have opportunity numbers. User will be able to click on the opportunity number and get to webUI screen where he could see opportunity details and maybe even modify it.
Best regards,
Vlad

Hi,
You can link Webi Document to webUI content in CRM with help of Hyperlink based on particular column then you need to parse the data.
Once Parse button is clicked, it displays with the parts of the URL parsed into sections depending on parameters specified in OpenDocument URL.
for more information kindly go through following document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0daee1d-0e38-2d10-0c91-8bb4ab5aa266?QuickLink=index&overridelayout=true&47467978778722
Best Regards,
Pushkar Dhale

Equipment download from ECC 6.0 to CRM 7.0

Hi Guys,
I am trying to Replicate equipments from ECC 6.0 to CRM 7.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
SURESH.

Hi,
go to ERP.
check there the table CRMRFCPAR
Is there an entry for OBJ_NAME EQUIPMENT?
If no create it.
If yes check this entry if everything looks fine.
Afterwards start a new initial load.
Best regards
Manfred

Options for loading data from legacy mainframe to SAP CRM and ECC

Hello All,
I am new to SAP.
As part of data conversion planning from legacy mainframe to SAP CRM and ECC systems, I need to know the different tools available for loading the data and comparative analysis of the tools by showing the features. Please also describe the process to evaluate the tools (prototyping, technical discussions etc) and make the recommendations.
I would also appreciate any information on testing tools like (eCATT) and any third party tools (like Informatica)
I know I am asking for lot of things here. But, I really appreciate any information reagrding this.
Thanks,
Balu

Hi
Data Migration(Conversions) mainly involves the following Major Steps
Discovery->Extract->Cleanse->Transform->Load
Discovery-> Involves identifying various source systems available where the actual data is residing.
Extract->Extract the data from the source systems(legacy systems)
Cleanse->Cleanse the data by enriching it,De-duplications etc
Transform->Transform the data into SAP Loadable format
Load->Upload the data into SAP Using the Load Programs(Eg,BDC,LSMW,Data Transfer Workbench,BAPIs etc)
Also i would request you to visit http://www.businessobjects.com/solutions/im/data_migration.asp
Cheers,
Hakim

Data Migration from CRM 5.0 to CRM 7.0

Hi Friends,
We are into a re-implementation on CRM 7.0. The old system was on CRM 5.0.
Since this is not an upgrade, the data will not copied over from the old system into the new system.
So, now I would like to know how to migrate data (master/transaction) from CRM 5.0 into 7.0.
I have read that we can make use of BAPI/LSMW/IDOC/XIF adapters to push info into CRM.
But, the customer wants all the historical data to be in the new system.
I think master data can be handled.... but how to migrate the transaction data?.... i mean the number ranges/document flow.. and other relationships.. how can we maintain the same links into the new system?
If it was a migration from legacy system into the SAP CRM, we could have gone ahead with new number ranges etc... but this migration is from SAP to SAP.
Also, we will have ECC6.0 connected to CRM 7.0. ANy additional things to be taken care of when the connection is live in DEV/QA/PROd instances?
Any pointers to this ?

Hi Gary,
As per my understanding, your data migration involves quite complex scenarios covering the CRM and ERP box. As the customer needs the old data to be present in the new implementation, the old data needs to be migrated from the CRM 5.0 to CRM 7.0. For the migration to happen, you need to setup the customization (like the number ranges,Condition Data Tables, etc ). Then only you can proceed with the data migration. Also, you need a proper backup plan as this involves proper backup of the data.
Once the setup is complete, you need to configure the ECC6.0 with the CRM7.0 system. Here also, you need to do a lot of settings and performing the Initial loading of the Adapter Objects. But before you proceed with the entire operation, the entire system landscape must be properly defined with appropriate settings.
My recomendation is to take help of SAP Consultants and data migration experts as they are the best persons to guide you on this. Also it would be great if you can go through the SAP Best Practices documents which are best repository documents to guide you on this.
Have a look on this link for an overview of the CRM Data Migration
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Hope this helps.
Thanks,
Samantak.

Upgrade from CRM 5.0 to CRM 2007

Hi,
We are planning to update from CRM 5.0 to CRM 2007. We are using CRM for Leads, Opportunities and Account & Contact Management with PCUI as front end. We do have some customized iViews for Sales People and Customers. Can any one, please provide me the step-by-step process to do technical and functional upgrade or point me towards the documentation on the same
You will rewarded with the points. Thanks in advance. Please, Its URGENT...
Cheers,
Amit

Amit,
Based on your reply your work looks like the following:
1. Basis teams performs tech upgrade of your dev system
2. Security team grants temporary expanded access in dev system to access new UI and new UI tools
3. Dev/Config team takes standard delivered new UI screens and adjusts screen layouts
4. Dev/Config team adjusts any BADI's built in the previous release
The data model of CRM has not changed. If you stuck with the EEWB and used all the standard methods of enhancing the data model, you don't need to worry about data migration. However if you did not play by the SAP standards you could have more work.
As far as tracking your project you can use solution manager or build simple project tracking in MS project.
If you did no coding period, and only configuration. You should be able to complete all the configuration work in less than two weeks to get the screens as needed. However that is based on having at least one to two weeks of learning the new UI tool.
I would guess a config-only CRM implementation would only need two-three to finish all reconcilation work not including testing and training.
Take care,
Stephen

Equipment Download from ECC 6.0 to CRM 5.0

Hi,
I have made equipment in ECC 6.0 using the Transaction code IE01.
While trying to download it into CRM, the BDoc shows a validation error
I have activated the adapter objects EQUI_CONFIG and EQUIPMENT.
I will be obliged If somebody can give me the step by step process to download the equipment from ECC to CRM and the customizations to be done as a prerequisite.
Thank You
Rekha

Hello Everyone,
Iam trying to Download Equipments from ECC 5.0 to CRM 5.0.
Iam getting a Validation Error in the Bdoc CRM_EQ_DMBDOC.
The Error Message is <b>Assign a Base Category to the Product.</b>
I have the Base Hierarchy R3PRODSTYP Assigned to the Application
Product.
And i cannot edit the Hierarchy or Categories since they are Downloaded
from ECC.
Please let me know how to Specify a Base Hierarchy/Category for the
Equipments to get Downloaded as Individual Objects.
Thanks & Regards
Kumar

Getting Customer data from Different R3 system to CRM

Hi Gurus,
I need to get Customer data from different R3 systems to CRM. But the problem is, the customer datas in these R3 systems have the same BP number, and the SD datas were defined same in these R3 systems. Thus, when ı try to fetch these SD datas to CRM, it overwrites the existing datas.
I have read different scenarios to solve this;
1. About Using Mapping.
2. About Working on different Clients.
Do you have any solution or suggestion? Need your Help...
Best Regards...

Hi,
The multplie backend scneario is supproted but wth restrictions and on a project basis. Unfortunealtey there's no simple document we can refer you to for this. You would need to involved SAP conuslting- please refer to note 1084315.
Best regards,
Brian.

Migrate CRM opportunities from version 5.0 to CRM 7.0 CRM

Hi
How can we migrate all the CRM Opportunities from CRM 5.0 to CRM 7.0?
Regards,
Winston

OK, that makes more sense. Attached is in version 8.2, which you can open.
Attachments:
bmm212.zip ‏634 KB

Data flow from E-commerce to SAP CRM 7.0 , ECC and third party system

Hi,
I have a requirement like the customers are created in E-commerce website of the company. When a customer is created the data should be synch to CRM , ECC and thrid party system ( price data from CRM for the customer ).
How do we transfer the data from E-commerce to CRM.?.andn ECC. Is it transferred first to CRM and then to ECC. Can we acheive all the systems synched at a time.
Can anyone explain with some design.
Thank you,
Regards,
Prashanth.

Hi
SAP CRM E-Commerce (called as WEB CHANNEL) works as per the below options (in CRM 7.0 and ECC 6.0)
1. SAP CRM Web channel with CRM back end where CRM will be a leading system for order creation. From E-Commerce channel, the order is saved in the back end CRM system and then replicated to ECC (through middleware settings).
In this scenario PRODUCT CATALOG will be created in CRM system. The use of TREX server will be used for product catalog replication.Also, the image server will be required for the display of product images in the PRODUCT CATALOG.
2. SAP CRM Web channel with ECC back end where ECC will be a leading system for ORDER CREATION. This is a new offering in CRM 7.0 where from E-Commerce web shop the order is directly created in ECC system. Hence no middleware settings are required for order replication.
In this scenario also PRODUCT CATALOG will be created in CRM system. The use of TREX server will be used for product catalog replication. Also, the image server will be required for the display of product images in the PRODUCT CATALOG.
3. For customer replication from E-Commerce > CRM > ECC, you need to maintain the middleware settings between CRM and ECC for business partner replication.
Hope this will clarify.
Regards

Upgradation from CRM 4.0 to CRM 7.0 with respect to sales order.

Hi All,
Can you please tell me what are all the 'EEWB enchacement changes' to be carried out during upgrade from CRM 4.0 to CRM 7.0 with respect to sales order..
Thanks & Regards
Prasanna

hi
check out the upgradation Note available in the Master Lists for upgradation.

BP , Activitites - Migration from CRM 4.0 to CRM 2007

Hi Experts,
We are planning to mirgrate the following Data from CRM 4.0 to CRM 6.0
1) Business Partner with relationship and Attachment
2) Activities
What could be the best approach to migrate?
How can we record the BP data with relation from the legacy system ?
The detailed answers will be appreciated ...
Thanks in Advance
Regards,

1) Extract all the partner data using either z-programs or XIF outbound adapter. As you are loading them in you will need to maintain/map the "legacy partner number".
2) Extract all the activities using a z-program/XIF outbound adapter. Convert in the new activities using the mapping from step #1.
In either case you will have quite of bit of work to do. This should keep you busy for a couple months.
Take care,
Stephen

Reasons to upgrade from CRM 4.0 to CRM 7.0 ?

Hi Experts,
We have CRM 4.0 working on our client system. Why should they upgrade from CRM 4.0 to CRM 7.0 ?
A few reasons that I can think of are :
1) SAP will not support CRM 4.0 -
But they can get maintenance support from SAP although at a higher cost
2) CRM WebClient - fast and easy to configure and maintain -
but this is not so convincing a reason that they should upgrade and then almost implement whole of CRM again. They already have Portal.
3) Some new functionality added by SAP in the newer versions-----That is good but their business is working good with the existing functionality of CRM 4.0
Please provide some compelling reasons so that we can ask our client to go for upgrade.
Thanks in advance.
Regards,
Vikas

Hi Vikas,
Although your customer happy with the functions in CRM 4.0, and they are willing to pay extra money for extended maintenance fee. SAP will end the support of CRM 4.0 sooner for later.
Other reasons I could mention:
1. if there is Java stack then the support of jave stack and the jdk version 1.3.1 is ended.
2. CRM architecture was changed since CRM 6.0 and and 7.0 provided New tools and assistants simplify, standardize, and reduce development effort significantly, i.e. less code development, more flexible customizing. From this prospective, 7.0 is the investment safe release for long-term
3. Enhancement of existing functions, details can be found in CRM 7.0 Release notes
4. If you use compoenent like TREX, definately you will be benefit from newer version, stable, faster etc.
There should be a lot, and you can order upgrade value proposition service from SAP for formal evaluation.
Cheers,
Denny

Up gradation from CRM 4.0 to CRM 7.0

Similar Messages

Maybe you are looking for