Up-grade from version 7 to 8

Hi all.
Because the error goes out, it embarrasses it though the
version improved from seven to eight.
The error message is this.
Variable form Variable is undefined.
In version 7, this error doesn't occur.
Did the specification of the variable check change?
Or, should I set the management screen?

When I used a Client variable, an error occurred.
Version 1.6.0_01 of the JVM.
The jdbc driver is oracle JDBC driver JDK1.4.
The database is oracle9i Release 9.2.0.7.0.
Though I am same as environment when I worked in CF7, what is
bad?
500
ROOT CAUSE:
coldfusion.runtime.ClientScopeDBException: lulu_jdbc_thin
Operation failed in a data source.
at coldfusion.runtime.JDBCHelper.Store(JDBCHelper.java:256)
at
coldfusion.runtime.ClientScopeServiceImpl.PersistClientVariables(ClientScopeServiceImpl.j ava:358)
at
coldfusion.runtime.ClientScopeServiceImpl.PersistClientVariablesForRequest(ClientScopeSer viceImpl.java:324)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:3 3)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at
coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
at coldfusion.CfmServlet.service(CfmServlet.java:175)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Similar Messages

Trying to up grade from Contribute 4 to 6.5! Is there a time limit how long you own a Licence?

We bought Contribute 4 sometime before 2006! When trying to Up Grade the first Agends where very helpfull and wanted to Activate it with an 1 time Code!
We managed to activate it finally in Win7! Only two weeks later the Labtop broke down and we managed to get the Software deactivated by using an old Computer from our local repair shop.
Now I tryed to activate it again in Win8 and the next ADOBE agend told itś not possible to Up grade from Contribute 4 to 6.5, because the Serialnumber is to old!!!

Hi,
the old mashine is broken down and the company AVALON, who
installed the program has no records anylonger about the program
details.
They only gave us the inf that the program is Contribute
Version 4 and they didn´t even know if it was a single licence or if
they had it under Company licenze.
I managed a few weeks ago to
activate the up grade to my Labtop, because after the winter season we
had some holiday time and I tried to get it done at home.
Onfortunatly
my own Labtop crashed a week after.
Now we started to work and we have
to up grade the Webpages.
Kauko bought the update for 115 EUR in
January and he is not going to like it when I tell him they gave us
wrong Info from AVALON when asking if the up date is working or not!
So how we proceed?
On 20-05-2013, Shekhar_Dhiman wrote:
RE:
TRYING TO UP GRADE FROM CONTRIBUTE 4 TO 6.5! IS THERE A TIME LIMIT HOW
LONG YOU OWN A LICENCE?
created by Shekhar_Dhiman in
Contribute General Discussion - View the full discussion

Transferring notes/grades from CS5 to photoshop element 10

Hello,
I own CS5 and just purchased photoshop element 10.
I have a question concerning how to transfer notes/grades from CS5 to photoshop element 10 ?
For example, in CS 5, I have given a 5 star grade to a picture. However, when I open photoshop element 10, this grade doesn't show up. Would you know how to transfer it so that I don't have to re-grade all the pict in PE10.
thanks in advance and best regards,
Pascal

Barbara - thank you for this tip. I did so, and ended up with this
message: "This catalog is from an older version of Elements and is
currently not supported on the Mac platform. Please create a new catalog
and then import your media files." It goes on to indicate that I may be
able to get membership services through Photoshop.com. . .but I'm wondering
if you have any advice on the first suggestion, that is - specifically how
to create a new catalog and then import media files?
Thanks again!

I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Should I upgrade my NVIDIA drivers from version 301.42 to 314.07 on my Mid-2010 MacBook Pro (6,2)?

Hello,
I was wondering if it would be wise for me to upgrade my MacBook Pro nvidia drivers from version 301.42 to the current version 314.07? Reason, I am asking this is because my MacBook Pro has the nvidia GeForce GT 330m processor with 256mb of video memory and I haven't updated my Windows 7 64bit Home Premium display drivers for about 7 months. At the time I installed the 301.42 driver it was the latest WHQL release, and back then I did the upgrade after installing the Bootcamp 4.0 drivers (from the Bootcamp Assistant which had the 26X.XX driver version), Windows 7 SP1, and all Windows Updates. I used a clean install on those drivers. So far, I haven't had any problems with the 301.42 driver which makes me sometimes double think whether I should upgrade the drivers or not to the 314.07 version. As a result this is why I go to these forums and ask what could be the best course of action in my case?
Thanks in advance!

Yes you should by all means update to the latest Nvidia drivers on the windows side of things. I presume you are using bootcamp (since thats really the only place this is relevant).
But yes! you should

I am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
(125734)

How do I fix project after "Remove From Version Control" corrupted it?

I am using RoboHelp 9.0.1 and installed both Tortoise SVN 1.6.9 and latest PushOK SVNSCC then added my large RoboHelp project to SVN. I was able to check in and out files from SVN but had several issues with it:
1) Super super slow. Working with folders or any renames would take 10 seconds per file and up to 1 hour if needed to refresh the root folder.
2) I could not perform some actions at all, such as delete, rename, or move folders. I kept getting COM errors.
I therefore decided that working with SVN and RoboHelp is not practical, at least not on my VPN so I decided to disconnect the project from source control and just work locally. The only option that I saw that sounded like it would do that was the "Remove from Version Control". This started a process that lasted for several hours. At the end of it, I now have several significant issues:
1) The order of the files and folders in my Project Manager is completely wrong now. I have almost 1000 topics and reordering all of them is not possible.
2) The Table of Contents, Glossary, and Index files appear empty. They had content before.
2) A couple of the Single Source Layouts I had created are completely missing.
3) Many, but not all, of the folders have tons of files with the extension ending in "_temp_removed_by_svn"
4) Many, but not all, of the files are actually gone from SVN so I can't recover a clean image. There was no warning that this command would actually delete the files from SVN (I thought it would just remove the version control connection).
5) Who know what other issue exist that I haven't seen.
Any idea how I can fix this?
Thanks in advance,
Dan

Are the "_temp_removed_by_svn" files in your local folder or SVN? Let us know how you get on with the new project. It sounds like something is wrong with SVN. Can you use the SVN Log command to see whether there is a different version you can restore. This might also give you an indication of what might have caused the problem. You could try deleting your CPD file. It gets rebuilt it is isn't there anyway. This file can become bloated and it is good practice to delete it when it gets close to 2mb in size. Your project is fairly large and has a lot of folders and may affect performance. Have you considered splitting them and merging the output? I know you probably don't want to consider this right now, but I think it may be a better long term solution.
The RoboColum(n)
@robocolumn
Colum McAndrew

How do you fix 'unable to upgrade from version 0'?

I have been working on 6 ibooks over the past year, documenting a lot of stuff for user manuals for our school. The ibooks were all created in iBA version 1.0, but are not published - we only use them internally so we just use the previews.
I gave up trying to upgrade my 1.0 iBooks, it takes too long to 'optimize' the files when I try to open them in 2.0. I have read all the issues with iBA 2.0, but decided to download 2.0 on another computer and wabt to try to re-write all my old 1.0 manuals (I have all the files that went into them).
However, when I double-click to open the 2.0, nothing happens. So I go to 'File' and select 'New from Template Chooser'. I then get the window with all the new templates, including the portrait ones. When I select any template, say the 5th one for example, I get the prompt "The document 'Textbook 05.ibatemplate' could not be upgraded. Unable to upgrade from version 0". This happens for every template. I don't understand. I downloaded the 2.0 from the app store onto a 'clean' computer. Yes, it has Lion on it and all the spec requirements to run iBA. Can anyone help me with what to do next?

Did you ask Apple for help yet?
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.

Error updating adobe download assistant from version 1.0.6 to 1.2.9

i am getting an error updated adobe download assistant from version 1.0.6 to 1.2.9. "The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.

Sammybobammy89 what Adobe software title are you trying to install? To resolve your current error remove version 1.0.6 prior to installing version 1.2.9.

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

To configure the browser to use Acrobat or Adobe Reader to open PDF files:
1. Quit Internet Explorer(any other browser)
2. Start Acrobat or Adobe Reader.
3. Choose Edit > Preferences.
4. Select Internet in the list on the left.
5. Deselect(Uncheck) Display PDF in Browser, and click OK.
6. Restart Internet Explorer

HT201407 Hi, I upgraded my Iphone 3gs from version 4.1 to 6.0.1 but upon restarting, the sim card is no longer recognized, i cant restore with itune nothing at all!! i'm so confused and ****** off... please provide any help

Hi, I upgraded my Iphone 3gs from version 4.1 to 6.0.1 but upon restarting, the sim card is no longer recognized, i cant restore with itune nothing at all!! i'm so confused and ****** off... please provide any help

Is the SIM from the carrier the device is locked to?
Has the device ever been hacked or jailbroken?
Have you tried simply removing and re-installing the SIM? What about replacing the SIM?

HT4623 I having difficulty in updating my iphone 3GS software from version 4.1 to version 5.1. I cannot update through my iphone & through itunes. Each time I tried a message appeared saying iphone software server cannot be contacted. Please, help

I am having difficulty in updating my iphone 3GS software from version 4.1 to version 5.1. I tried using my phone but cannot find the update software button even when I have gone through the right process by tapping SETTING, then GENERAL, yet could not find Update Software button. I mean the update Software button is not seen there.
I tried using itunes, yet no way. Each time I connect my iphone to my laptop itunes software comes up automatically and alerts me that a newer version of software for my iphone is available, It usually gives me the option of Download & Install or Download Only. Whichever of the option I click a message will always appear telling me that the iphone update server could not be contacted, then asking me to make sure that my network settings are correct and active or try again latter. Sometimes, when click on the Update button on my itune software. It will display an error has occured.
I have even tried to Restore iphone from itunes, yet the problem keep repeating itself.
Can anyone help me?

Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now.

I am running Windows 7 and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I can not upgrade from version 9.1.5 to 9.2.3 on my IMAC free?? I have to pay for this upgrade?

I can not upgrade from version 9.1.5 to 9.2.3 on my IMAC free?? I have to pay for this upgrade?

That is a free update (not an upgrade) what happens when you try? How are you trying to update? did your Mac come with restore disks or did you download software form teh App Store? Have you logged onto the App store and checked purchased software for updates?
LN

Up-grade from version 7 to 8

Similar Messages

Maybe you are looking for