Up-grade PATH from Stack9 to Stack11

I would like to upgrade Stack11 from Stack9 for Enterprise Portal.
But I couldn't find any documents which described the Up-grade path.
Does anyone know whether I have to implement Stack 10 and Stack11, or I just implement only Stack 11 for Enterpirse SP9 (Stack9) ? Does anyone find that kind of documents?
Thank you for you coopration in advance.
Best regards
Yuki

Hi Yuki,
Where I get this information? My Company told me
See SAP Note 697535.
"If your Source Release is J2EE Engine 6.30 SP02, do not apply Support Packages higher than SP04.
Once you have applied SP04, you can apply higher Support Packages.
If your Source Release is J2EE Engine 6.30 SP03, you can apply any Support Package that is higher than SP03."
Moreover, you find the following sentence in the support package stack guide:
"Dependencies:
Java support packages contain the complete software involved. Within one release, you can therefore skip Java support packages with lower SP number (if no other information is given, for example, in the
corresponding SAP Notes)."
Hope this is enough official information for you.
Regards, Karsten

Similar Messages

How to find out web-inf path from the physical drive?

How to find out web-inf path from the physical drive?
I have some user profiles in web-inf directory.SO I want to know the path from root directory like
d:/program files/allaire/jrun/appname/web-inf/profiles/username like that.
Presently I am able to get the path upto the application directory and from that I am concatinationg web-inf/profiles/username .
But it is giving problems when it is deployed under unix or linux.Because web-inf there it treats as WEB_INF
SO I want to get the path of web-inf directory with out hard coding.
Thanku

String path = application.getRealPath("/WEB-INF/profiles/username");
Note sure why you need this, but you don't need the real path to read the file - you can get an InputStream using the relative path. See ServletContext getResource() and getResourceAsStream().

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

Trying to subtract a complex path from another, can't get the result I need

I'd really appreciate some help on this. I'm not familiar with illustrator and am stuck trying to accomplish what I hope is an easy task. I've uploaded my .ai here just in case anyone can help.
I have two layers, one is a collection of lines/paths which make up a line drawing of a tree, then the layer above that is a bunch of paths using a 'distressed' brush. I've read several tutorials on using the pathfinder tool to subtract one from the other but every time I'm left with way more of the tree deleted than I want. I tried a simple test case (subtracting a single distressed path from a rectangle shape) and it worked as expected. I don't know why this one isn't working other than maybe it's just too complex.
On the left (tempoary red background) is what my layers look like, on the right is the effect I'm trying to achieve (the white parts removed from the black parts). I need this to end up being a vector so it can get cut out of a vinyl decal.
Thanks a ton for any help, I'm really stuck on this as I spent 99% of my time in photoshop.

That worked perfectly, thank you. I selected everything on the tree layer, made compound path, then did the same on the texture layer. Then the subtract worked great.
Just so I understand what's going on here - make compound path means take all the selected stuff and make it into one single shape/path, vs. having a bunch of separate paths on the same layer?
Really appreciate your help, thanks again.

How to find the OBIEE report (Catelogue) path from BI enabled excel sheet

Dear All,
I have an excel sheet where the data is coming from BI server. How can I find the BI report name and path from the excel sheet.
Regards
Mustafa

Sorry Friends,
May be I am not conveying the message properly.
Let me try to do it again.
I have an excel sheet which is created by somebody else and send me by mail.
This excel sheet is having connectivity to the BI server and pulling data from BI.
What I want to know is to get the BI report and view name from the excel sheet so that I can do some modification in the report.
Please not the owner of the excel file is un-reachable.
Let say I have uploaded the sample Excel in the following URL http://www.fileflyer.com/view/VSHtOA8.
This excel file is pulling data from our BI Server
Could anybody tell me the report path, name and view name from the excel file
Regards
Mustafa

How can I script moving paths from one file to another?

Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389

Issue with Getting the file path from InputFile component

Hi,
One of our requirement is like below:
I am working on ADF 11g (latest release R1) page. User will select the file and when he/she clicks on the Save button we need to store the file path in the database.
In the database file_path is varchar2(300). We need to store just the file path. I am using InputFile component but filepath is not getting inserted.
This is really urgent. It would be really appreciate if anyone can guide me on this.
Thanks
MC

Hi Mahesh,
I have manage to store the file path from the InputFile component in Jdev 11g. I found the file upload script from this forum and manage to alter it so that i could save the file path to the database. But my problem is to retrieve it back to view as a document. Hope this will help you :)
This is an example of what I have manage to save to my DB :
(CLOB) //192.168.238.53/c$/Research/Docs/0906160744/EyeCandyLog.txt
In my form, I save the file path first before I update the other fields. My code is something like this :
public void uploadFile(ValueChangeEvent valueChangeEvent) {
// Add event code here...
InputStream in;
FileOutputStream out;
if(tanda == 0){
try {
// final Context context = getInitialContext();
RS01Proposal rS01Proposal = (RS01Proposal)new InitialContext().lookup("Phase2-RS01Proposal#sr.model.RS01Proposal");
id = rS01Proposal.dptProposalid();
tanda = tanda + 1;
System.out.println("tanda"+ tanda);
} catch (Exception ex) {
ex.printStackTrace();
System.out.println("id"+id);
proposal = id.substring(6);
System.out.println("proposal"+proposal);
UploadedFile file = (UploadedFile)valueChangeEvent.getNewValue();
String fileUploadLoc = "//192.168.238.53/c$/Research/Docs/"+id+"/";//The place where file will saved
//create upload directory
boolean exists = (new File(fileUploadLoc)).exists();
if (!exists) {
(new File(fileUploadLoc)).mkdirs();
if (file != null && file.getLength() > 0) {
FacesContext context = FacesContext.getCurrentInstance();
FacesMessage message =
new FacesMessage("File Uploaded " + file.getFilename() +
" (" + file.getLength() + " bytes)");
*// extracting the file message to get the path*
context.addMessage(valueChangeEvent.getComponent().getClientId(context), message);
columnL = valueChangeEvent.getComponent().getClientId(context);
column = columnL.substring(9);
System.out.println(column);
columnLengkap = "RS01"+column.toUpperCase();
System.out.println("columnLengkap"+columnLengkap);
*try {*
out = new FileOutputStream(fileUploadLoc + "" + file.getFilename());
in = file.getInputStream();
*for (int bytes = 0; bytes < file.getLength(); bytes++) {*
out.write(in.read());
in.close();
out.close();
} catch (IOException e) {
e.printStackTrace();
} else {
String filename = file != null ? file.getFilename() : null;
String byteLength = file != null ? "" + file.getLength() : "0";
FacesContext context = FacesContext.getCurrentInstance();
FacesMessage message =
new FacesMessage(FacesMessage.SEVERITY_WARN, " " + " " +
filename + " (" + byteLength + " bytes)",
null);
context.addMessage(valueChangeEvent.getComponent().getClientId(context),
message);
System.out.println(fileUploadLoc+file.getFilename());
a = fileUploadLoc+file.getFilename();
b = b + 1;
if (flagInsert == 0){
try {
// final Context context = getInitialContext();
RS01Proposal rS01Proposal = (RS01Proposal)new InitialContext().lookup("Phase2-RS01Proposal#sr.model.RS01Proposal");
rS01Proposal.insertDoc(id,proposal,columnLengkap,a);
flagInsert = flagInsert + 1;
System.out.println("tanda"+ tanda);
//session
ProposalSession.storeCurrentProposalId(id);
} catch (Exception ex) {
ex.printStackTrace();
}else{
// update proses
try {
// final Context context = getInitialContext();
RS01Proposal rS01Proposal = (RS01Proposal)new InitialContext().lookup("Phase2-RS01Proposal#sr.model.RS01Proposal");
rS01Proposal.updateDoc(id,proposal,columnLengkap,a);
flagInsert = flagInsert + 1;
//session
ProposalSession.storeCurrentProposalId(id);
System.out.println("tanda"+ tanda);
} catch (Exception ex) {
ex.printStackTrace();
}

What is the best way to get PATHS from one Photoshop psd file to another?

Hi! New on the site, and I signed up specifically to ask the best way to import one .psd file into another, including the paths on the paths palette.
Almost all of my Photoshop drawings make heavy use of vector paths, which I then stroke using using PS natural-media brushes and the "stroke paths" function (usually with "simulate pressure" checked.) Also, my .psd files tend to be, um, HUGE... and I typically break up a whole drawing into separate PS files and then assemble all of them into one final finished graphic.
I have no trouble moving raster stuff from file to file. Just put all the layers I want to transfer into a group and drag the group to the other .psd. Works fine, including layer masks. But I have not found a good way to get vector paths from the Paths palette of one .psd to another. Of course I can select paths and copy them to the Win clipboard, switch to the other .psd, and paste them back in. The drawback to that method is that I lose the correct size relation between the results of previously done "stroke paths" operations (on raster layers) and the paths that generated them. Sometimes the copied-in paths are way too large, sometimes way too small, never Just Right.
As I'm sure most of you know, if you resize an entire Photoshop document from within PS, any paths it contains are correctly resized along with everything else. That's no longer true after grouped raster layers are dragged over to another document but paths are copied and pasted in. The size connection is lost. (Location placement, too.)
I WANT those paths! After I bring a piece of a drawing into the full final drawing, what looked good when I was working on it separately often doesn't look right any longer and I want to re-stroke those paths using different brush diameter, opacity, etc., or maybe even a completely different brush.
I've tried bring outside .psd files in as smart objects with the Place command but either that doesn't work or I'm not doing it right. Using Place, the paths in the Placed document don't come in at all.
I'll be very grateful for any hints or strategies any of you knowledgeable folks can give me. Thanks very much!
Jim
Note, PS CS3 extended on Win 7 pro.

Denny
1. Connect the two macs - firewire, ethernet, sneakernet as suits you - and copy the iPhoto Library Folder from Old Machine to New Machine. Drag it from Home/Pictures to the same location on the new machine.
2. Because all the files 'belong' to the account on the old machine, you have to update the file permissions: hence Download BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
Note: This must be run on the new machine after copying the files over.
3. Then launch iPhoto on the new machine.
Regards
TD

External hard drive -- old file path from a previous laptop is still where to find my songs, how do I change?

My iTunes library is a mess, it is stored on an external hard drive. My old laptop died unexpectedly and I didn't have a problem resetting the file path for the library on my new laptop. The other day my son was trying to update his iPod when I wasn't home and I don't know what he did.... GRRRR Any songs I purchased on my old laptop are now not able to be found. When I click on 'get info' on a song it shows the old file path from the old laptop. Songs that I purchased since the new laptop are still playable and great. I know my songs are still there but I can't seem to get the file path to reset on the old music. HELP!!! PLEASE

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or an external drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Is there a Migration Path from EP 5.0 to EP 7.0?

Hi,
I´m checking if there is a Migration Path from EP 5.0 to EP 7.0, has some one done this or know if this is Posible or if we need to go from 5.0 to 6.0 and then to 7.0?
Thanx in Advanced!
Kind Regards.
Gerardo J

Hi Gerardo Jiménez ,
we need to go from 5.0 to 6.0 and then to 7.0(Migration path to be followed)
The following websites give u detailed procedure & order of migration :
How to Migrate from SAP Enterprise Portal 5.0 SP6 to SAP Netweaver '04
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08279e8d-0701-0010-6d9a-8c1a790eb3b8
How to Migrate from SAP Enterprise Portal 6.0 SP2 to SAP Netweaver '04
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/778ac2ee-0901-0010-61a9-a2e174996bd7
Pls give u'r mai ID so that I can forward some docs.....
cheers!
gyanaraj
****Pls reward points if u find this helpful

Remove Oracle client path from windows 2008 64 bit

Hi All,
I had to unstall the epm Hyperion product after i found that installation need to done on a different language, which has oracle client for both 32 and 64 bit. But when i reinstall it is complaining about the oracle home path.
Below is the error i get from the log.
[FATAL] [INS-32053] The original name of the Oracle Home directory specified already exists.
CAUSE: The name of the Oracle home directory Home indicated on the command line corresponded to a name of origin existing Oracle Home directory in the central inventory.
ACTION: Choose another name for Oracle Home directory. Abandon this installation session and try again.
I have made sure that the filesystem is completely is removed after the unstallation except for these client files which i have removed manually.
Looks like the unnstalation doesn't happen correctly for the clients and old path is somewhere still exists. I have removed the client path from environment variable path list and tried again but no luck.
Can anyone help me to identify the places where i need to look to remove the earlier Oracle Home.
Thanks

The registry, perhaps, or the inventory (which is in c:\program files\oracle or c:\program files (x86)\oracle - cannot recall right now).
However, if you search Oracle Support for "windows clean machine," you can find an article that shows you how to remove every trace of Oracle software from your Windows computer.

Finding the Path From Servlet

Please guys I need some help on this.
I have created a context in my Tomcat/webapps called EcBugManager.
My servlets are in the webapps/EcBugManager/Web-Info folder.
I want to say in a servlet to upload files to a folder
which is in the webapps/EcBugManager/UploadFiles folder.
How should i give the relative path from the servlet.
I have tried the following but with no success.
- "..\\EcBugManager\\UploadFiles";
- "..\\UploadFiles";
This works, but i need the relative path
- "D:\\Tomcat\\webapps\\ EcBugManager\\UploadFiles";
Is the way i am trying to do is wrong. please help on this.
Rhanks in Advance
Shiran

The question doesn't clear enought.
but you may try HttpServletRequest.getPathTranslated(), which returns
the root path of your servlet.
then you may append the sub-directory you want to located.
or try servlet's creatTempfile method.

File path from specific directory

hi all ,
How to get full file path from specific directory having many folder inside that directory.
I have file name and main directory name,please help me if you know about it

I recognize that this post is half a year old at this writing, and the OP has probably long since either solved or abandoned the problem in question. That being stipulated: if I understand the question properly, the OP is stating that there is a directory named A, and contained somewhere within that directory or one (or more) of its subdirectories is one (or more) file(s) named abc.txt, and OP would like to be able to locate and obtain the canonical path to said file(s). While I am in no way a java maven, I've written a brief program which appears to do exactly that:
import java.io.*;
public class Main {
    public Main() {
        String whatImLookingFor = "abc.txt";
        String startingDirectory = "A";
        File path = new File("A");
        recursivelySearch(path, whatImLookingFor);
    private void recursivelySearch(File path, String whatImLookingFor) {
        try {
            if (path.isFile()) {
                if (path.getName().equals(whatImLookingFor))
                    System.out.println(path.getCanonicalPath());
            else
                if (path.isDirectory()) {
                    File[] currentFiles = path.listFiles();
                    for (int i=0; i<currentFiles.length; i++)
                        recursivelySearch(currentFiles, whatImLookingFor);
catch(IOException ioe) {
System.out.println("During search got error "+ioe.getMessage());
public static void main(String[] args) {
new Main();

Getting path from file

Good Morning,
Is there a way to get a file path from a file without having to select it through client_get_file_name?
for example i have a file 'test_01.txt' in C:/
I cannot hard code the path as each day the txt name will change eg. 'test_02'.
Is there another way to select the full path name in C:/ where file like 'test%'?
Thank you in advance,
D

Sorry francois ill be a more clear
On a variable i want to keep changing the path provided.
For example one day will be var:='C:/Test_01'
next day will be var:='C:/Test_03'
as the last number is generated randomly im trying to figure a way to get the correct path in C:/ where the name corresponds to 'test' so i can pass it to my variable
Edited by: 794018 on 18-Oct-2012 00:50

Process chains failing - There is no path from LOADING (ipak) to PSAPROCESS

Hello
In the load process type of my process chain I am loading till PSA.
I am using the process type - update from PSA for 3 ODSs and loading all of them to the cube. one of these three process types is finishing successfully. For rest of the two I get following errors:
1. There is no path from [IPAK name] to PSAPROCESS [variant name]
2. Variant doesnot contain a valid combination request/data target
For the two process types which are failing, the request is not being picked up from PSA. Can you please suggest what can be the reason and how to fix it?
Thanks & Regards
Shreyas

Hi Shreyas,
How is it going on today , is there any change or same thing happened?.
I hope you have followed the below steps for re activation and schedule.
1. Go to process chain maintain view and in the menu option
Process Chain --> "Remove from schedule".
2.Process Chain --> "Activate" .
3.Process Chain --> "Activate and schedule" ( Note: Don't do this step If it is immediate start )
If the above steps does not work may be you can do one more thing , that is copy the whole process chain in to new one and create a new start event .
I had seen this type of errors and after activate and schedule it went fine.
Hope this will help.
Cheers
Manju

Up-grade PATH from Stack9 to Stack11

Similar Messages

Maybe you are looking for