Up graded 3.6 to 15.0.1 & all web sites are slow, slow, slow or will not even load, HELP!

All web pages load very very slow or not at all.
Also I notice that in the URL bar it will say... about blank or go to a web site even after a page does load.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select "Reset Firefox", just use "Start in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Similar Messages

HT201210 while up-grading the IOS 6 to my iphone, the up-grade stop and now my screen does not stop to sart (apple) than shut down than restart (apple scree,) than shut down again

while up-grading the IOS 6 to my iphone, the up-grade stop and now my screen does not stop to sart (apple) than shut down than restart (apple scree,) than shut down again

If restoring the phone as new did not solve your problem, you'll need to bring the phone to Apple for evaluation.

My phone has just up graded the new updates and the ring tone i purchased from itune will not go back on my phone any help please

my iphone has just updated the lastest upgrade and i have lost my purchased ring tones they are still in my itunes but will not sync with my phone any help please

I also have this problem.
I downloaded all my purchased items from my phone to itunes.
I then upgraded my phone to the latest ios.
The ring tone appears in itunes and is showing on my phone when selected in itunes under devices BUT I cant find it anywhere on the iphone 4.
My son got an ipod for Christmas and it shows up on his!?
Anyone able to help with how I find the tone on my phone?

Since up grading, will not open, respond but says it's running

I upgrded to the new version. Browser will not open, will not respond or anything. I have done all the steps in your help menus but nothing works. I have to use internet explorer to get on line. Nothing happens with Firefox

http://kb.mozillazine.org/Firefox.exe_always_open

Up graded to 4.o, now the google function upper left corner will not allow me to open previous sites. How can I correct this?

in the past all I had to do was single click on the previous sites I had visited and they would open up. Now that I have updated to 4.0 I click on them but they do not appear in the google window. I tried to copy and paste to main search bar but they will not let me paste either .
Not sure I like this 4.0

The orange Firefox menu button is hidden by default on Windows XP.
You see the orange (on Linux gray) Firefox menu button if the Menu Bar is hidden.
* https://support.mozilla.org/kb/how-do-i-get-firefox-button
* https://support.mozilla.org/kb/Menu+bar+is+missing
You can hide or make the Menu bar visible via View > Toolbars or via Firefox > Options or right-click a toolbar.
If you need to access the hidden Menu bar then press the F10 key or tap the Alt key to make the Menu Bar appear temporarily.

Since up grading software my computer will not connect to iphone5 as a hotspot. It sees it but can't connect

Ever snice I upgraded software for Iphone 5, my computer will not coonect to it as a hotspot wirelessly. Computer sees it but will not connect. Anyone else having or had this problem and waht is the correction for it.

Please update to version 24.0 when you have the chance. Please also check with another browser to see if you can reproduce the issue.
thanks

All of you who use the 80gb ipod classic and have problems with it freezing and syncing with itunes...well I have joined the club. This is a serious issue with apple and they need to correct it. I have tried everything to no avial.

This is beyond frustrating. I just wasted 70 dollars between a new battery and gas for my ipod 80gb classic. It was having major issues syncing and freezing with itunes. I tried everything possible and noticed that a lot of people have been having the same issues with their ipod classics as well. I must have restored it several times and now it just totally bit the dust. Now I have to shell out 130 dollars to send it in to apple to be rebuilt/fixed. This is nonsense and I just cant believe apple isn't doing anything to address this issue. My ipod was doing great for about nearly 5 years and now this. I even down-graded to itunes 10.7, but by the time I had it set up to try, that's when my ipod totally failed and will not even come on. Grrrrrrrrrrrrrrr

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Strange classloader experience with toplink-essentials on Oc4j-10.1.3.3.0

Hi,
I am teaching classes at the Eotvos University/Budapest on a topic where OC4J has been used for 2 years. Students use jdeveloper (regularly updated) to create webapps with EJB3.0+toplink backends. They test their projects first with the JDeveloper embedded OC4J, but after that they deploy it on a central server running standalone OC4J.
Students make quite an intensive and versatile use of the OC4J server, a noteworthy stress-test you may find interesting! The server is a Ubuntu Linux with JDK_1.5.0_14.
1. The first known issue is that after about 10 projects are deployed (small class projects 3-4 EJBs, 3-4 JSP-s each), oc4j regularl goes into a "runaway" mode, i.e. the CPU utilization of the JVM process goes up to 99-100%. Static web content is still available, but all applications stop responding. I can state pretty safely that the applications deployed are fairly harmless and it is not even necessary to run them to make this happen. I.e. after 10-15 apps are depoyed it is enough to start the admin-client.jar or the admin console to experience this problem. (The applications have no problem individually: last year after these issues occurred, we installed them individually for grading and nothing like this happened).
Let me point out that SO FAR this happened with Oc4j-10.1.3.1 and Oc4j-10.1.3.2 only, and this was the main reason we swithed to Oc4j-10.1.3.3.0
2. Another issue that exists both with the earlier versions and 10.1.3.3.0 is that applications need to include the toplink-essentials.jar explicitely if they use EJB3.0 entities. It appears to me that this should not be neessary as there are default definitions for that in config/server.xml (a shared-library definition for toplink-essentials), and in config/system-application.xml (a corresponding import-shared-library tag), but still their applications cannot be deployed because of the follwing error:
Deploy error: Deploy error: Operation failed with error:
HiĂˇnyzĂł osztĂˇly: oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider
FĂĽggĹ' osztĂˇly: com.evermind.server.ejb.persistence.PersistenceUnitManagerImpl
BetĂ¶ltĹ': oc4j:10.1.3
KĂłdforrĂˇs: /opt/oc4j_101330/j2ee/home/lib/oc4j-internal.jar
(On our machines, JDK displays some errors in Hungarian: HiĂˇnyzĂł osztĂˇly=Missing class; FĂĽggĹ' osztĂˇly=Dependent class; BetĂ¶ltĹ'=Loader; KĂłdforrĂˇs=Code source.)
To fix this issue, we used a workaround, i.e. their orion-application.xml is regularly extended with something like:
<library path="/opt/oc4j/toplink/jlib/toplink-essentials.jar"/>
And this solved the problem. Can you explain this?
3. Now, with 10.1.3.3.0 this did not help much either. Although the toplink-essentials.jar was found, another nasty exception happened in the server still during deployment:
Caused by: java.lang.NoSuchMethodException: oracle.toplink.essentials.platform.server.oc4j.Oc4jPlatform.<init>(oracle.toplink.essentials.internal.sessions.DatabaseSessionImpl)
at java.lang.Class.getConstructor0(Class.java:2678)
at java.lang.Class.getConstructor(Class.java:1629)
at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerSetupImpl.updateServerPlatform(EntityManagerSetupImpl.java:309)
Apparently a class in toplink-essentials.jar (version 2, build 41, i.e. the one that comes with oc4j) cannot properly invoke a the constructor of another class IN THE SAME JAR.
I checked everything, even unzipped and checked the class signatures, and also made sure that there is no other toplink-essentials.jar in the classpath. Still the error remained.
FInally, I tried to add the above libary tag to $OC4J_HOME/config/apllication.xml instead of the applications local orion-application.xml, and - voila!!! - it WORKS now!
Can you explain all this to me? From the documentation the location of the <library> tag in the descriptor files should not amke any difference, but still it seems to do.
Regards: Arpad Bakay

Seems to be a bug. That was the response from Oracle support (Metalink)
Response:
Your issue seems to be related to bug 5594702 - Abstract: EJB30 ENTITY BEAN WITH @ID AND @COLUMN ANNOTATION FAILS TO DEPLOY ON AIX.
There is an issue with the IBM JDK/JRE 1.5's processing of annotations.
Links:
http://www.theserverside.com/discussions/thread.tss?thread_id=37764
http://www-128.ibm.com/developerworks/forums/dw_thread.jsp?forum=367&thread=112543&cat=10
When processing annotations it returns boolean values as false.
Work-around:
Fully specify the @Column annotation's boolean values. If insertable and updatable are set to false (which will happen due to this bug) then TopLink sets the PK
mapping to read-only and the exception seen is expected.
Note: nullable attribute of the @Colmun is not used in the EJB3/JPA preview of 10.1.3.0 If the customer MUST override the default column name then they should use:
@Column(name="column-name", insertable=true, updatable=true)
If they do not wish to override the default column name then simply do not use an @Column annotation.
It can be deleted or commented out in the JDev generated code.
There are two reported annotation processing issues with the AIX JVM. One was fixed in SR1 and the other is fixed
in SR3 (due out Oc 11 - today). Upgrading to these more recent JVM releases may also address this issue.
RECOMMENDED SOLUTIONS:
1. Upgrade the IBM AIX JVM to SR3.
OR
2. Fix all generated @Column annotations as described above

Need camera raw 6.7 so I can open CR2 files from my Canon 5d mark iii

I purchase PS CS5 and says my camera is compatible and it will not open up the CR2 camera raw files from my canon 5D Mark iii camera. I used it in the past, and up graded my hard drive to MAC OSX 10.9, purchased new PS CS5 and Adobe will not update the Camera Raw 6 to 6.7 which using my files...

Hi redtulips54,
There you go. Download the one you need, depending on your operating system.
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Hope that Helps.
Cheers!
~ Arpit

How do I install jam pack on os x lion

I've recently up graded to OSX Lion and found that when i have opened Garageband all the instruments and loops are missing from Jam Pack Remix tools so most of the tunes saved won't play. I've contacted Apple Software support (at great cost) they tell me its because the jam pack are power pc they won't work.
Surely Apple haven't upgraded the OS so you lose everything you've done on garageband? Has anyone got a solution to resolve this? Thanks.

The problem is, that the installers of the Jam Packs are power pc programs, that will not run on Lion.
The Instruments and loops however still work with Lion.
If you have a TimeMachine backup of your system from the time before the migration, you could try to restore the loops library from your TimeMachine backup, you will need to reinstall all folders and subfolders from
/Library/Application Support/GarageBand/
An other approach would be to rip the PowerPC installation disk: If you open the package (ctls click-> Show Package contents) you will see installers for the loop libraries and folders with loops and instruments. An example how to rip those packages is in this thread:
http://support.apple.com/kb/HT3805

HT2375 logic pro 9 update won't load on mountain lion

I HAD LOGIC PRO 8 ,WORKING FINE, HAD SNOW LEAPORD, WORKING FINE DECIDED TO UP GRADE OS AND LOGIC PRO 8 TO 9.UP GRADED THE OS TO MOUNTAIN LION THEN PURCHASED LOGIC PRO UP GRADE TO 9 IT WILL NOT LOAD.I HAVE A INTEL I MAC 4 GB RAM 2.66 PROCESSOR 500GB HARD DRIVE. QUICK TIME 10.2. PLEASE HELP

You don't provide enough information. What upgrade? Apple stopped selling the upgrade about 1.5 years ago, now you purchase Logic Pro 9 in the Mac App Store.
If you have an older version, you have to install Logic Pro 9 (ignore all the installer error messages) and then run Software Update to get version 9.1.8. Older versions don't launch on Mountain Lion.

After Effects, Photoshop, Premier Pro CS6

I'm new to CS and have been learning quite a few different programs over the past few months regarding post-production. I've primarily been using Photoshop, After Effects, and Premier Pro. I have noticed there are tons of different ways to work within and across these programs through the CS package. Because there are so many ways to accomplish an end result, I was unsure what is the right way to edit or manipulate video footage. For instance, if I plan on using after effects to do color correction using color finesse, or matte painting and rotoscoping, what order should I open the files and change them? Should I start in premier and then use AE, or should I change in AE, export as a rendered file format, and then import into premiere? I noticed not all AE changes are accepted in Premiere, which would require me to render in AE first correct? Same question goes with any changes to footage in photoshop as well. Renders always downgrade the quality somewhat and by the time I'm done applying the effects and final edit, I don't want my project to be rendered two or three times before the final render. Any advice would be great or at least a direction to look to get resources to help with my workflow issue. Thank you

Let's define some terms first:
Shot: A continuous block of unedited footage from a single point of view. Also called a Take.
Sequence: Two or more shots that that have been trimmed or cut together to tell a story.
Scene: A continuous block of storytelling either set in a single location or following a particular character. The end of a scene is typically marked by a change in location, style, or time. A scene can be a single shot, a simple sequence, or a combination of many sequences.
Movie: A completed project that tells a story. A movie can be 10 seconds long, or 10 hours (re: Andy Warhol)
The best use of After Effects is to work on a Shot, Scene or sometimes a Sequence, to composite elements, add graphics, or adjust the look (color grading) of a Shot or a Sequence. After Effects is probably the most difficult tool you could ever choose to edit a long form movie. Dynamic link is very useful in the early stages of developing sequences. Once the sequences are approved, I will usually render the sequence to a production codec for use in the NLE. I'll talk more about codecs later.
The best use of Premiere Pro (or any NLE) is to organize shots into a sequence or scene, and then to organize the scenes into a movie. Most amateurs try and cut a long form (over 10 minutes) movie in a single timeline. Professional editors organize each sequence in their own timeline (notice that Premiere Pro calles timelines Sequence 01, Sequence 02 etc.) and then combine those sequences into Scenes or a movie by combining the sequences into the final movie in a single timeline. In the end, this is a more efficient way of working on any project involving more than just a few shots.
Photoshop may be used to work on shots, but it is entirely unsuited as an editing tool. Photoshop and Illustrator are primarilly used to create elements like graphics or backgrounds that are used in After Effects or Premiere as part of the story.
The best workflow is the one that carries you to project completion with the fewest number of steps in the least amount of time. In nearly every case this means that you trim your shots into sequences in your NLE. The next step is to modify shots or sequences in a compositing program like After Effects. If you are working on individual shots in After Effects, it is almost always a good idea to give them handles. I handle is a few extra frames at the beginning and end to allow for fine tuning the edit in your NLE. Good rule of thumb is to add 30 to 60 frames.
Let's talk now, just for a second, about rendering. You are a little misinformed about rendering.
There are two types of codecs used to in production. The first is a production codec. This would be something like ProRez, or Animation, or even JPEG 2000, at the highest quality settings. To be classified as a production codec the rendered files must be lossless, or nearly lossless. Production codecs take up a lot of DriveSpace. Some of them will not even play back in real-time on any system. Many production houses use image sequences as their standard production format. You can render, remember, and then render again from into production codecs with no loss in quality. All you need is enough storage space to hold the files. Every production codec that I use is at least 10 bit color depth.
The second type of codek is called a delivery codec. These are highly compressed, playback in real time on inexpensive systems, and should never, I repeat never be used in the production pipeline. Anything in the MPEG class of codecs is a delivery codec and should not be used in the production pipeline.
Come to think of it, there is a third type of video codec. These are acquisition codecs. They are the codecs used by the various camera manufactures to record video. AVCHD, is a very low data rate codec used by consumer cameras. Other cameras from the consumer level to the pro level may use various forms of MPEG encoding. These "acquisition codecs" are not suitable for use downstream in the production pipeline at all. What I mean by that is, you should never render some original footage back to the original acquisition codec. The only exception to this rule are professional cameras and recording systems that record in lossless or raw formats right from the start.
One last thing. Don't forget sound. Professional polished productions always use specific sound editing programs to complete the audio track. While you can do a fair job in most NLE's, you can do a much better job in something like Adobe Audition. Cutting, editing, or adjusting sound and AE should be limited to reference audio or scratch tracks only. After eEffects will do a good job of rendering a lossless audio track from a clean original, but it's one of the most cumbersome and ineffective audio editing tools ever designed. Oh wait, AE is not an audio editing tool, so it's okay with me.
I hope this helps you along your path.

Upgraded to firefox 5 but it wont start up on my desktop

I up graded from firefox 3.6 to firefox 5 and now it will not work on my computer. I have tried to start it and nothing happens. I have tried everything on the troubleshooting web site to no avail. I have tried now loading 4 and it won't work either. I have had to switch to Google Chrome. I lost all my bookmarks. I am really disappointed, I have used Firefox for years...
I am running an HP with Windows vista 64 bit.'''bold text'''

1. verify on another Mac first. and another port.
2. very likely dead SATA card
read about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

Adobe SpeedGrade Continues to Crash

Hello:
So far adobe speed grade has been great to work with and very happy with the results. Unfortunately, I cannot render to export my video. The first several times I tried to render my video it worked and finished but I tried to playback the video I get nothing but a black screen.
Then after trying different formats speedgrade will not even complete a render process. The error I get is "child process failed".
Any Help?

Hi,
I'm having major problems with this. I've managed to render out sequences in the past, but suddenly i'm unable to now. DPX renders, but the image sequence is just an adobe screen that says the file name and child process failed. And pro res won't even render out, says of combination of 'Could Not Write Frame ** (Unspecified error)', or Child Process Failed after around frame 18 or so, but not always the same frame.
My sequence has 6 clips, around 4 minutes total, that I put together in speedgrade. I have two grading clips covering 3 of the original clips each.
My original files are 3500x1500 ProRes422.
Any help would be appreciated!!
Thanks

Grading Program Help

I'm taking a Java class and need some help with a program. I already turned it in, so I'm not looking for somebody to do the work for me. I just want to understand where I screwed up.
If the user enters 'numbers':
Get input for the grade number in decimal format. i.e. 74.22645 (enter it with 5 decimal places)
Utilize the Math class and round the number to zero decimal places, then use the int cast method (Page 82) to convert to an integer.(ensure you round it before type casting it)
Utilize a switch statement to determine the corresponding letter grade. Use the grading criteria from this course for the numbers. (ensure you accept all allowable numbers i.e. 70-79 and all in between)
Output the corresponding letter grade along with the initial number entered in decimal format utilizing the printf method and format specifiers. Output the number in only 3 decimal places.
34
if the user enters 'letters':
Get input for the grade letter in String format.
Utilize a switch statement to determine the corresponding output for the letter entered. (ensure you accept both upper and lower case letters.
Use the grading criteria from this course for the numbers. (you must use charAt( ) so the string will work with your switch)
Output the corresponding numbers values for the letter entered along with the letter initially entered.
import java.util.Scanner;
public class EdwardsToddProg4
public static void main(String[] args)
Scanner stdIn = new Scanner(System.in);
int choice;
double numberGrade;
int numericGrade;
String letterGrade;
System.out.println("Welcome to Todds Grading Program");
System.out.println("Enter 1 for number grades and 2 for letter grades.");
int selection = choice.charAt(0);
while (selection==1)
System.out.println("Enter a number grade in the following format, 88.12345");
//numberGrade += stdIn.nextLine ();
numberGrade = Math.round(numberGrade);
numericGrade = (int) (numberGrade);
switch (numericGrade)
case 1:
if (numericGrade >=90 && numericGrade <=100);
System.out.printf("\n You got an A because your grade is: %.2f \n",numberGrade);
break;
case 2:
if (numericGrade >=80 && numericGrade <=89);
System.out.printf("\n You got an B because your grade is: %.2f \n", numberGrade);
break;
case 3:
if (numericGrade >=70 && numericGrade <=79);
System.out.printf("\n You got an C because your grade is: %.2f \n",numberGrade);
break;
case 4:
if (numericGrade >=60 && numericGrade <=69);
System.out.printf("\n You got an D because your grade is: %.2f \n",numberGrade);
break;
case 5:
if (numericGrade <=59);
System.out.printf("\n You got an F because your grade is: %.2f \n",numberGrade);
break;
while (selection==2)
     System.out.println("Please enter your letter grade.");
     letterGrade += stdIn.nextLine ();
     switch (letterGrade)
          case A:
               System.out.println("90-100 =" +"A".equalsIgnoreCase("a"));
               break;
          case B:
               System.out.println("80-89.9 =" +"B".equalsIgnoreCase("b"));
               break;
          case C:
               System.out.println("70-79.9 =" +"C".equalsIgnoreCase("c"));
               break;
          case D:
               System.out.println("60-69.9 =" +"D".equalsIgnoreCase("d"));
               break;
          case F:
               System.out.println("0-59.9 =" +"F".equalsIgnoreCase("f"));
               break;
}

Okay, so I went back in and updated my program.
I got rid of int selection=choice.charAt(0); now i just have System.out.println("Enter 1 for number grades and 2 for letter grades.");
I updated my while statements to: while (choice==1) and while (choice==2)
the only errors i am getting now revolve around entering lettergrades: here's what i have.
while (choice==2) //changed selection to choice
     System.out.println("Please enter your letter grade.");
letterGrade.charAt(0);
switch (letterGrade) //changed to grade
          case A:
               System.out.println("90-100 =" +"A".equalsIgnoreCase("a"));
               break;
I'm still getting an error that says it's looking for an int in switch(letterGrade) statement and I'm not sure why...why does the switch need and int?
Also still getting beat up on my cases. I guess I thought that's what the charAt(0) would give me. if the user enters an A then case A applies. I'm guessing I thought wrong????

Up graded 3.6 to 15.0.1 & all web sites are slow, slow, slow or will not even load, HELP!

Similar Messages

Maybe you are looking for