Up-grading my motherboard and cpu while keeping my win.7 home premium

I have a CQ 5700y( H-Apricot RS780L-uATX apricot- part# 624832-001), I would like to up-grade this to be faster,and get a dual core or quad core, and able to run up graded RAM,but still be able to to keep my Windows 7 Home Premium, if this is possible can you give me options for the m/boards, cpu's with better slots for ram, and part#'s to order.

Hello @jgarner,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are looking to upgrade a few parts on your desktop computer, and I would be happy to assist you in this matter!
All of the recommendations I can suggest are purely based on the motherboard that came with your computer. With this said, the upgradable options for potential processors are as follows:
(while these processors may not have applicable parts for the HP PartSurfer, they can be acquired by 3rd party vendors)
AMD Phenom II X6 10xxT Six-Core (Thuban core)
AMD Phenom II X4 9xx/9xxe/8xx Quad-Core (Deneb core)
AMD Phenom II X3 7xx/7xxe Triple-Core (Heka core)
AMD Phenom II X2 5xx (Callisto core)
AMD Athlon X4 6xx/6xxe (Propus)
AMD Athlon X3 4xx/4xxe (Rana)
AMD Athlon X2 2xx/2xxe (Regor)
AMD Sempron Single Core 1xx (Sargas core)
The upgradable memory you can install on your computer are:
Dual channel memory architecture
Two DDR3 DIMMs (240-pin) sockets PC3-8500 (DDR3-1066)
PC3-10600 (DDR3-1333) 497157-D88
Non-ECC memory only, unbuffered
Supports 1GB, 2GB, and 4GB DDR3 DIMMs
Supports up to 8 GB on 64-bit systems (DIMMs run at DDR3-1066)
Supports up to 4 GB on 32-bit PCs
*32-bit PCs cannot address a full 4.0 GB of memory
I hope this helps!
Have a great weekend!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

Need help: new motherboard and cpu, can´t boot win 8

hi!
i just installed a new motherboard (z87-gd65) and a new cpu (intel core i7 4770k) now i cant run windows 8. I can go in to BIOS.
When i try to run windows the screen just goes black, and stays that way. i tried to boot whit windows cd but nothing happens.
Please help me
board: MSi Z87-GD65
BIOS: E7845IMS V1.1
VGA: GTX580 MSI TWIN FROZR
PSU:Corsair AX860i
CPU: Inte core i74770K
MEM: Corsair DDR3 2X8 GB
HDD: 125 GB SSD
OS: Windows 8

>>Posting Guide<<

[SOLVED]-Upgraded motherboard and CPU-UUID error?

I upgraded (replaced) my motherboard and CPU-from a dual core to a 3 core AMD. Still on AM2 socket with DDR2 memory.
Arch-Fallback boots fine. But my normal Arch will not get to drive checks and boot. The errors allude to Arch wanting to change drive UUIDs but failing. It ends with a command ramfs$ prompt-but keyboard input does not work at it...even though keyboard in BIOS works fine
Any theories how to get the regular Arch to boot? This bug is the only real problem with the process-I haven't done anything else to prepare or finish the upgrade. And as I said Arch-Fallback boots and works beautifully.
Errors say:
Loading filesystem module
Attempting to create device '/dev/disk/by-uuid/blah blah blah'
ERROR; Failed to parse block device name for '/dev/disk/by-uuid/blah blah blah'
ERROR: root fs cannot be detected
happens 3 times for each of patitions mounted on system at boot. The root UUID I know exists, as it is in GRUB to load Arch to begin with.
Last edited by Skripka (2009-03-27 12:39:45)

Odysseus wrote:Try rebuilding your initcpio, An easy way to do it is to re-install the kernel via pacman,
Excellent-thank you!

Move Windows 8.1 Pro Hard Drive, Graphics Card and Programs to New Motherboard and CPU

Want to move everything, hard drive, installed programs, video card, network adapter, ram drive, DVD, from one computer to another, nothing will change except motherboard and CPU. Old motherboard and CPU will be installed in a new computer case which
will revert back to a Windows 7 Pro computer with a fresh install and no programs to be used as a dedicated CAD work station. Motherboard and CPU swap will be the only change, even the RAM will be the same. What activation problems will I encounter,
I do not want to re-install anything, if possible.

Hi,
I would like to confirm what kind of licensing you used on Windows 8.1, the OEM or the retailed.
For the OEM one, the Windows 8.1 transferred to another new Motherboard will not be activated.
For the retailed one, you should find that the system will boot with the new motherboard, install some drivers then boot successfully.
You will need to use telephone activation for the updated system, but should not need to re-install. When warned that you need to activate, select the "Contact Microsoft Customer Support" option and follow the instructions. With a tone dial phone
you can do this without speaking to anyone. See http://www.eightforums.com/tutorials/24636-activate-windows-8-phone.html
Kate Li
TechNet Community Support

WIN 7 Home Premium and a HP mini 210-1000!

Have mini 210-1000, refurb, came with a WIN 7 Starter, never did check and record the product key that came with...ERROR!
1. Went on line 12 days ago and purchased WIN 7 Home premium. Have spend HOURS on line with MS techs trying to get it to install. Came here before I waste any more time.
This machine has 1G RAM - CAN it install WIN 7 Home premium?
2. Since the last attempted install (MS using PowerISO Virtual Drive Manager (free download ver.), and which was UNsuccessful, my HP and MS now tell me that my WIN 7 Starter is 'not genuine' and they give me several options to obtain the product key.
The product key in control panel/status is not EVEN in the correct format and starts with 2 (unacceptable) zeros...
IF this machine was refurbed by HP or Contractor, does HP have a usable product key to return me to normal operation? Am having trouble re-reaching the MS tech, I believe HE's out of ideas...
ANYone know a guru ? Am not quite ready to invest $$$ to fix a mess that MS started - and it's a long, long story...which takes me back to the original question: am I asking my Notebook to install WIN 7 Home Premium when it's not able??
Thank you for any help you can provide!
Marty

Hi, Marty:
Please read the info at the link below and see if you can do a clean install of W7 HP.
http://randomwindowstips.wordpress.com/2009/12/05/windows-7-clean-install-upgrade-license-key-error-...
Paul

When using FF 5.0, rollover type ads on Facebook game Lexulous pages are 'enlarged' and block 1/3 of the game board. Using up to date versions of Win 7 Home Premium, Adobe Flash and ActiveX

When using FF 5.0, rollover type ads (i.e. ads for XBOX) on Facebook game Lexulous pages are 'enlarged' and block 1/3 of the game board. Using up to date versions of Win 7 Home Premium, Adobe Flash and ActiveX on an HP Pavillion dv7 laptop. Does NOT happen at all in MS IE 8, but occurs every time in FF 5.0.
Also, Google 'translate this page' links do not work in FF 5.0, but works in MS IE 8. All I get in FF is a blank page, time after time.

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

770-C45 Motherboard and CPU question

I have referred to the CPU compatibility chart for this motherboard and my question is in regards to the AMD Phenom II X4 965 Black Edition CPU. I see other 965 CPU's listed as compatible. I realize that this CPU is 140 watts. Is this a problem. Could someone please clarify this for me.
Thanks for your time

thanks for the assistance, I have decided to go with a 955 instead of a 965.
I also read the Memory sticky and it said to look for AMD tested RAM. I am using tigerdirect.ca and dont see any RAM that says it has been specifically made for an AMD. Currently I am looking at Kingston PC10600 1333MHz 4GB DDR3 (KVR1333D3K2/4GR). I only plan to use 2 as per the guide. Any suggestions.
Thanks for clearing up my earlier question.

Get NI RMC 8355 motherboard and CPU serial number programmatically

Hi all,
I need to read the motherboard or CPU serial numbers of the NI RMC 8355 programmatically.
I have tried to use "wmic baseboard get serialnumber" comand in cmd, but it returns "0123456789", which apparently is not a valid serial number.
Does anyone have any idea how I can read that information?
Is there any toolkit or LabVIEW VI which will do that job.
Thanks in advance.

Gevorg,
This is a Windows property that you can access the same way you would with a desktop PC, using the 'wmic baseboard get serialnumber' command.
http://www.windows-commandline.com/get-serial-number-for-ram-motherboard-hard-disk/
Regards,
Kristen

Formatted HP dm4-3099se with Windows 7 Home Premium and Would Want to Re-install the Home Premium

My laptop is HP Pavilion dm4-3099se and it came with Windows 7 Home Premium. The password was misplaced and I was advised to format the system. The system was formatted (all the disks were deleted except the C: drive) and a Windows 8 pro OS installed. Shortly after the formatting, the misplaced password was found. If it is possible, I would love to revert to the OS that came with the system (i.e Window Home Premium) and also recover all the drivers that came with the system.
Please, help me.
This question was solved.
View Solution.

Hi,
There are Two options available.
1. You can order a replacement set of Recovery Discs using the link below - these will reinstall the operating system, all required drivers and nearly all of the original software ( the exception often being trials of MS Office ). They will also re-create all the original partitions, including the Recovery Partition.
Order HP Recovery Discs.
2. Another option you could consider is to create your own Windows 7 installation disc.
Also, if possible, back-up the swsetup folder that can be found at the root of your C drive.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium 64bit ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source ( Digital River ).
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Regarding the drivers etc you need, if you were able to back-up the swsetup this will contain all the software and driver installers for your notebook - if you weren't able to, drivers and software you may need can also be found Here.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can i take out the motherboard and CPU and replace it with a newer one?

I was wondering if i could take out the CPU and Motherboard of an early 2011 13" macbook pro with a 2.3GHz dual core i5, and replace it with a 2012 2.9GHz 13" dual core i7? I don't care about the costs but i just want to know if it's possible? I've upgraded my computer to the max so far, but i need some more processing power and i think the new ivy bridge processors will do me some good. Thanks for any replies

NOPE.
I'm about 99.9% sure it won't fit.
Plus the rest of the stuff won't plug or won't be compatible.

Let's talk motherboard and CPU in simple English please-

I am a home enthusiast/student (signed up with a popular web site) that loves all things Adobe. I have the Master Suite. I love Premiere Pro (can’t wait to learn After Effects). I have a consumer-grade AVCHD video camera from a ‘big box store’.
I don’t care about having a gaming rig or overclocking, or learning about RAID, or a huge/heavy computer case in my tiny office. So the minimum number of drives will work.
I have been watching Newegg TV and the ASUS guy nearly put me in a coma with all the acronyms.
I want a ‘middle of the road’ rig.
Can someone enlighten me on the following:
Sandy Bridge vs. Ivy Bridge?
LGA 1155 vs. LGA 2011?
What does this mean: “Onboard Video Chipset: Supported only by CPU with integrated graphic”? This is a common note on the motherboard description on the website.
SSD caching?
Thanks.

>I want a ‘middle of the road’ rig
What does that mean in dollars?
Check current prices, but last month this was under $1,500 (excluding software)
Intel i7 3770k CPU
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116501
Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813121640
16Gig Ram
http://www.newegg.com/Product/Product.aspx?Item=N82E16820148600
Mid-Tower Case
http://www.newegg.com/Product/Product.aspx?Item=N82E16811129042
850w Power Supply
http://www.newegg.com/Product/Product.aspx?Item=N82E16817171061
500Gig Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136769
500Gig Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136769
1Terabyte Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822236339
GTX 660 Ti 2Gig
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130809
120mm x2 Case Fan
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103060
Keyboard & Mouse
http://www.newegg.com/Product/Product.aspx?Item=N82E16823109232
Sata DVD Writer
http://www.newegg.com/Product/Product.aspx?Item=N82E16827135204
Again check current... last month this was under $2,000 (excluding software)
Intel i7 3930k CPU
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492
Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813121552
32Gig Ram
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231507
Full Tower Case
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119225
1000w Power Supply
http://www.newegg.com/Product/Product.aspx?Item=N82E16817171056
500Gig Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136769
500Gig Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136769
1Terabyte Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822236339
1Terabyte Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822236339
GTX670 2Gig
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130782
Keyboard & Mouse
http://www.newegg.com/Product/Product.aspx?Item=N82E16823109232
Sata DVD Writer
http://www.newegg.com/Product/Product.aspx?Item=N82E16827135204
CPU Cooler
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103099
Premiere Pro drive configuration - NOTE that I do NOT do raid
500Gig #1 for Windows and all software
500Gig #2 for Projects and all temp files
1T #1 for all source media (video and sound) & exports w/3 drives
1T #2 for all exported media w/4 drives

HP Motherboards and CPU compatibility

I've been reading around and would like to know, do I have only the upgrade options specified for my CPU, or can I use any FM2 socket CPU?
Also, is it true that I need to update my BIOS if I want to use the EVGA GTX 750Ti Superclocked Edition?
(Link to the GFX card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814487024&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Ju...
Thank you for your time.
This question was solved.
View Solution.

Hi,
Motherboard Specifications, (JasmineR) | Soporte HP®
Processor
TDP
AMD Sempron 240 (Trinity) Dual Core
up to 65 W
AMD A4-5300 (Trinity) 65W Dual Core
up to 65 W
AMD A6-5400K (Trinity) Dual Core
up to 65 W
AMD A8-5500 (Trinity) Quad Core
up to 65 W
AMD A8-5600K (Trinity) Quad Core
up to 100 W
AMD A10-5700 (Trinity) Quad Core
up to 65 W
AMD A10-5800K (Trinity) Quad Core
up to 100 W
AMD A10-6700 (Trinity) Quad Core
up to 65 W
AMD A10-6800K (Trinity) Quad Core
up to 100 W
AMD Athlon X2 340 (Trinity) Dual Core
up to 65 W
AMD Athlon X4 740 (Trinity) Quad Core
up to 65 W
AMD A4 6300 (Richland) Dual Core
up to 65 W
AMD A6 6400K (Richland) Dual Core
up to 65 W
AMD A8 6500 (Richland) Quad Core
up to 65 W
AMD A8 6600K (Richland) Quad Core
up to 100 W
AMD A10 6700 (Richland) Quad Core
up to 65 W
AMD A10 6800K (Richland) Quad Core
up to 100 W
AMD FX670K (Richland) Quad Core
up to 65 W

Problem with motherboard and cpu cooler

First of all , hello.
Let me present my current pc.
Mainboard - MSI 880GM-E41
CPu - Amd phenom x2 560 black - unlocked to quad
Ram - 4 gb kingmax DDR 3
Video - Gainward GTS 450 512 DDR 5
Hdd - Western Digital 640 GB
Power suply - Sirtech 400 W
Now the problem.I bought a Scythe Katana 3 cooler because i couldnt stand the noise from AMD stock cooler anymore.
The cooler RPM in idle/load / full load is 2800 RPM (maximum !) Shoudnt the mainboard set the cooler's rotation to match the processor current usage ? My cooler stand in maximum rotations every single time.
Note that my temperatures are excelent.
I took a look in Bios and could find much.
H/W Monitor
Cooler - 4 pins selected
Smart fan target - disabled selected.Guess this is the automatic option.I dont wanna set it to manual in order to give some values.
Amd cool and quiet - enabled (tried it with disabled too , same deal)
C1E support - enabled.
Would updating my bios to lasted available solve this problem ? I wanted to do that but i wonder if updating the bios would interfere with my unlock of the processor's cores.
Thanks you very much.

Yes , it is
I dont actualy have an "enabled" option....just disabled or some values.
I heard from a friend that :
Smart Fan Target - the critical temperature from which the fan starts to grow in rotations
Cpu Min.Fan Speed - the desired rotations per minute in idle
Is this correct ?
Im thinking about
First - 45
Second - dont know....i have to test with different values.

OK WHATS THE BEST MOTHERBOARD AND CPU FOR ONLINE GAMING

Here i go again thinking about stepping up on motherboaerds and cpus! If you have an opinion on which would make the best online gaming setup let me here you hollor! I will only go with intel so all amd lovers dont bother!

He's better off with a Q6600 over the E6850, because you can clock the Q6600 to QX6850 speeds and it's quad core, so future proof anyway.
And the Q6600 costs less.
However the CPU will be very limited by that 7900GT.
A 8800GTX or HD2900XT would be a better choice.
EDIT: Get a G0 stepping Q6600, they have a lower TDP of 95w and require less voltage.

How to cancel TV and Phone while keeping Internet and Home Security

We have moved to CA and have Xfinity TV and Internet connected at our new address. However, we still have Triple Play (TV, Phone, Internet) AND Home Security service at our prior address in MN. We need to disconnect TV and Phone in MN immediately, but keep the Internet and Home Security services for another few weeks until we close on the house sale. We've spoken to multiple reps in CA and MN and been given the run around. Xfinity Home refers us to Comcast customer support, which refers us vack to Xfinity home. CA reps say only MN can get the MN account sorted out. Complete cluster.

ComcastZach, I think I love you.

Up-grading my motherboard and cpu while keeping my win.7 home premium

Similar Messages

Maybe you are looking for