Up to how many Mbps does airport extreme support?

I'm considering buying an airport extreme, but did not find info on how many Mbps. If anyone knows please let me know. Thanks.

Suffice it to say it is faster than any known consumer broadband Internet.
Its ridiculously fast speed is most useful for local file transfers over your LAN - Time Machine backups, NAS streaming etc.

Similar Messages

  • Does Airport Extreme support Static Routes?

    I have client using an Airport Extreme as their Router. They currently connect to another device outside their network using AppleTalk.
    It is planned to put this device onto TCP/IP but on a different subnet (e.g. their subnet is 192.168.5.X and the device will be on say 192.168.25.X). Does Airport Extreme support (like other Routers) the ability to set up a static link to a device on a different subnet (can’t find any information in a doco or the utility) or do they need to replace this with a “real“ router?

    Sure, I could do something like route add -net 10.100.10 192.168.0.100 on every client machine on the subnet, but there is no such way to configure a web cam and similiar devices
    Any idea, Apple?

  • How many luns does mac OSX support from a single target (array) is it 255??

    How many luns does mac OSX support from a single target (array) is it 255?
    For example, if using the Dual-channel 4Gb Fibre Channel PCI Express card?  Is it 255, 512 or higher?  I know it uses the ATTO driver, but I can't find any documentaiton about the upper limits of how many luns this HBA can address from a single target array on a SAN.  Thanks.

    Hi,
    The card should be an ATTO 42ES whcih supports 255 LUNS per channel
    Here's the info from the attached link
    Consider the following Celerity FC host adapter guidelines:
    • ATTO 4-Gb and 8-Gb FC cards (PCI-X and PCIe only) are supported. • Latest HP-specific ATTO Celerity FC host adapter driver • Latest HP-specific ATTO Configuration Tool • A maximum of 256 targets per host adapter channel are supported. • A maximum of 255 logical unit numbers (LUNs) per host adapter channel are supported. • PowerPC- and Intel-based servers are supported.
    http://www.attotech.com/pdfs/MacOSFCconnEVA5697-7653.pdf
    Hope that helps
    Beatle

  • Does AirPort Extreme support "loopback"?

    Hi All,
    My wife is has set up IIS 5.1 on a PC running Windows XP (with SP2) to serve a web page on our intranet. It seems to be set up correctly, but none of the computers on our intranet (PC or Mac) can access the page - although we can ping the server and it can ping us.
    Research indicates that we need to configure the router (an Airport Extreme - the flat square type) to forward traffic on port 80 to the IIS server's IP address. This research also indicates that this will only succeed if the router supports loopback. I've done a bit of searching and have not been able to find documentation to confirm or deny whether the AirPort Extreme supports loopback.
    Does it?
    Thank you,
    Jonathan L.
    PS - The firmware on the AirPort Extreme is up to date. - J

    If you could follow up with the resource you used to get that information, I'd appreciate it, but it's not essential.
    Over 7 years of supporting Apple's base stations.

  • HT201077 how many photos does i cloud support

    Is there a lmit on how many photos i cloud can support. I seem to level out at 1000

    You can keep up to 1000 photos in my photo stream and up to 5000 in each shared stream.  See http://support.apple.com/kb/HT4858and http://support.apple.com/kb/HT5902.

  • Does Airport Extreme support Bethere.co.uk?

    Hi,
    I would like to buy an Airport Extreme router to connect it with my bethere.co.uk ADSL 2+ connection. Currently, I'm using bethere's modem but would like to change to Airport Extreme since it supports 802.11n. Is this possible, if yes, how do I do that?
    Thanks!

    The Airport Extreme Base Station does not have a built in DSL modem. Therefore, you must continue to use whatever DSL modem you are currently using (which hopefully has an ethernet interface for connecting to computers), and cable it to the Airport Extreme Base Station's ethernet WAN port.

  • Does airport extreme support nat loopback?

    ...Like having my own server on my lan and access it the same way from inside my lan as from outside...
    On my old Xyxel I have to enable this by typing "ip nat loopback on" in it's terminal window...
    Anyone that know how this works with an airport extreme base station?

    or is it written in some specification for the AirPort device?
    NAT Loopback is not ever mentioned in any Apple specifications or installation manuals that I can locate.
    In addition, there are no settings for NAT Loopback in AirPort Utility, the application that must be used to configure the AriPorts.
    If Apple makes no mention of this setting, and the setting does not even exist in the configuration software, it is a good bet that NAT Loopback is not supported on the Apple product.

  • Does AirPort Extreme support external drives with Advanced Format (4K) ?

    Hi!
    I have an AirPort Extreme from 2008 and now i want to use a Raid 1 USB HDD for Time Machine.
    The new disks often has the new "Advanced Format" (4K blocks).
    Does this APE support such 4k drives?
    At the moment i don't have any experience with this new format,
    for this reason i don't know if the APE or the hdd case has to support this format.
    regards
    Sebastian

    Sebastian Brandner wrote:
    1) I'm using a simple USB Disk, connected to my APE, as Time Machine Backup Volume. This works quite well for about a year.
    Yes, for a few folks it does appear to work for a number of days, weeks, or months. But sooner or later, the backups turn up corrupted, often beyond repair. It happens to me about eery 3 months, which seems fairly typical. That's likely why Apple doesn't support it, and nobody should depend on it.
    2) The RAID Case shows only a single disk to the connected device, raid 1 handling ist internal and so it's again just a simple usb disk.
    Correct. I didn't say otherwise. In a supported location, Time Machine will back up to a hardware RAID set (but not a software one).
    3) The link with the supported disks doesn't handle the new disk format 4k. :-/ Maybe the support entry is too old.
    Note that it's a 2008 Airport Extreme; that predates the support article by at least a couple of years.
    But by all means, call AppleCare if you don't believe the support article.

  • How many bookmarks does my homepage support?

    Hello,
    I bookmark and it doesn't appear in my bookmarks list. Do I have too many bookmarks? How many am I allowed to save? If it is unlimited, where do I find the others? I have been having this problem when I click on the icon that allows me to automatically save a page. But, when I drag them to the toolbar, I then do see it listed.
    Thanks,
    Dan

    I do not see the relationship between your title and your question.
    There really aren't limits, where are you looking for the bookmarks.
    What do you mean by your home page supporting bookmarks.
    First let's make sure you know how the bookmarking works.
    Bookmarking methods - MozillaZine Knowledge Base
    http://kb.mozillazine.org/Bookmarking_methods
    When you use the Star to bookmark a page you can choose the folder it goes into.
    There are three primary bookmark folders.
    - Bookmarks Toolbar
    - Bookmarks Menu
    - Unsorted Bookmarks
    You can see all of your bookmarks in the bookmarks sidebar ("Ctrl+B") or in the Library List ("Ctrl+Shift+B") and you can use search from the location bar, from the bookmarks side bar or from the Library List to find a bookmark.
    If the page was bookmarked then the star becomes filled.
    Sorting and rearranging bookmarks - Firefox - MozillaZine Knowledge Base
    http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    Location Bar search - MozillaZine Knowledge Base
    http://kb.mozillazine.org/Location_Bar_search
    If you are doing things properly then there is a possiblity of this problem
    Corrupt localstore.rdf - MozillaZine Knowledge Base
    http://kb.mozillazine.org/Corrupt_localstore.rdf

  • How many AP does 2504 Controller Supports

    Hi,
    I would like to know how many AP's does WLC 2504 supports? As per the data sheets it supports 75 AP then why is the part number is still AIR-CT2504-50-K9 (where 50 is AP?)
    Thanks.
    Shakeer.

    Hi Shakeer,
    You are correct as per model AIR-CT2504-50-K9, 50 means that the maximum number of APs supported on this WLC is 50.
    But, 7.4 WLC release increased scale on 2504 WLC. Previously, it could support max of 50 APs.
    From the 7.4 WLC release notes:
    "Increased scale for Cisco 2500 Series Controllers to support 75 access points and 1000 clients."
    http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html
    I suggest if you upgrade to 7.4 you will get the full AP count as expected.
    HTH.
    Thanks,
    Ishant
    *** Please rate the post if you find it useful ***

  • How many taxonomy does SAP KM support?

    hi,
    I want create more than one taxonomy from subject and process dimension, is it possible in SAP? if so, how?
    or I can just create only one unified taxonomy?
    Thanks!

    Hi Yong,
    You can create as many taxonomies as you want.
    For example if you have different indecs, you can create any number of taxonomies under each index.
    Regards,
    Chamkaur

  • Does Airport extreme support Samsung SCX-3200 printer?

    I have a Samsung SCX-3200 printer (USB connection only) at home. We have both Mac and Windows based laptops. I would like to use Airport to connect to this printer over wireless. I am worried about the compatibility of the printer with the Airport.

    Yes

  • How many tvs does Apple TV support

    Do you need a separate router for each Apple TV you want to use? Do you need a network cable to connect to the ATV? My aim is to get rid of Comcast TV and phone and stick with just the internet access. Will I need multiple accounts to utilize ATV on all my TVs?

    Providing your network will take it you can have multiple Apple TV's on the same network. You will only need one account for multiple Apple TV's.
    As for a maximum number of Apple TV's, it's not entirely clear, you might want to look at my article on this matter.
    http://www.gartside.co.uk/WinstonsTips/howmany.html

  • How many monitors does the w520 support?

    Hi I have a w520 1920x1080 (nVidia quadro 1000)  that is currently connected to mini dock plus series 3. I'm currently running two external monitors, both are Dell 24 inch and I just ordered a third monitor (Asus 27 inch). I'm just wondering if the w520 can actually support all three monitors simultaneously?
    Further Detail:
    I have one of my Dell monitors connected via VGA and the other via DVI to display port. These monitors are all connected to the dock. I'm planning on connecting the Asus monitor via hdmi to displayport which will also be connected to the dock. Is this possible because I have read some threads on these forums that driving three external monitors on the w520 is not possible? Just need some clarification, thanks in advance. 
    Solved!
    Go to Solution.

    The W520 supports 3 screens (2 external + 1 internal) or 3 externals + 0 internal.
    If you need a third screen support (and not using the internal), do the following.
    Plug of the screens to the DVI or DP on the series 3 plus dock, and the third screen has to be connected to the displayport on the laptop if my memory serves me correctly.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • How many records does JDBC adapter can obtain in one polling?

    Hello everybody,
    I need to do an interface between legacy system and SAP ECC, the legacy systems have a DB so i use the jdbc adapter (sender) and receive the information to SAP ECC with proxy, so i need to activate the polling option from my jdbc adapter working as a sender, i read a table with lot of records, and i need to know how many records does jdbc adapter support when the polling is executed, because is necessary read all records from the table and change the status of the processed field.
    Is possible to get all the records from that table in one polling interval (50,000 records aprox)?, or i need to do the polling by blocks of records until finish all records from the table?, the second option, i dont have idea how can i do it.
    Regards,
    Vicman

    Hi again!,
    i still working on that, but i have a question, is possible to handle Store Procedure in jdbc adapter?? is supported?, like PL SQL, because i was working in the next query but i don't know if it works and where do i need to locate the query in the Query SQL Statement or in Update SQL Statement field or both? but how?.
    DECLARE c_cursor CURSOR FOR
    SELECT * FROM tablename
    WHERE processed=0
    OPEN c_cursor
       FETCH NEXT FROM c_cursor
    WHILE @@FETCH_STATUS = 0
    BEGIN
       update tablename set processed=1
       FETCH NEXT FROM c_cursor
    END
    CLOSE c_cursor
    DEALLOCATE c_cursor
    Regards,

Maybe you are looking for

  • Swing-L&F

    Hello, Does anybody know some free, HiDPI scalable Look and Feel for Swing? I need L&F that works well (scaling components, borders, fonts and so on) on HiDPI screens. Thanks.

  • How to make AE script folder?

    Hi, i want to ask something about script in after effect CS6. I have many script in my AE and I think its quite difficult to find the script i want. So, how to make script folder in AE or maybe group of script? So if I want to use the script i can fi

  • Standards accepted by Premiere elements 9

    Before january, I imported videos from my camcorder to Vegas software (under Windows). In january, I bought an imac and Adobe elements (photoshop and Premier elements 9). How to do to integrate towards Premiere elementsmy previous .m2t files ?

  • Enable Smart Views or Smart Folders in Reminders

    I used Reminders to keep track of all my tasks across Mac OS X and my iOS devices. To manage the large number of reminders I have in there, it would be great to have a new feature for "Smart Views" or "Smart Folders" that allow you to see those tasks

  • 8.1 Mini Player drops searches

    Just upgraded to 8.1 for windows. When I do a basic search in my music library (say for an artist) and then start playing and put iTunes in Mini Player mode, after a couple of tracks, it drops the search. It especially does this when I jump back out