Upadte from 4.3 to 4.3.1: reduced battery time
This is nuts! Yesterday morning I updated to 4.3.1 and before the day was over, my 3Gs's battery was also "over" (from 100% to 12%). In airplane mode, that is. Phone not used, at all. Last night, recharged it (to 100%). This morning, battery was completely flat! Still in airplane mode. WTH?
Any people out there with similar results? Feedback greatly appreciated.
Regards,
Robenroute
Hi This is Kamil
I am from Turkey.
When I updated to 4.3 I was horrified by the battery life. Once researching I found this post and I was able to stop the connection only after signing out of the AppStore as suggested previously in this thread battery was normal again, no push connection in netstat.
I updated the iPhone to 4.3.1 and now I cannot stop the push connection.
After the 4.3.1 signing out of the AppStore does nothing, the connection still appears.
I don't use push, I don't want push, but it seems like theres now way to turn it off.
I have tried step by step everything you can do to turn off push. Even my own procedures.
The first charge on 4.3.1 I was greeted with a 77% battery drop after full charge. Went from 100% to 23% in 9 hours 25 minutes with 14 minutes usage. All in standby while I slept. So i turned off the email accounts and charged. After the second charge it seems better, but I'm losing battery as if I use push (I don't use push in anyway and now I have to mention ping too) nor do I want it forced on me now. So I decided to restore the phone to confirm it's not just my app and stuff. I deleted 4.3.1 ipsw and re-downloaded for good measure.
Restored as new I have no email accounts, no apps installed, disabled push, disabled ping, connect to wifi like I always was before, turned off bluetooth (unlike I do, was always on with no battery effect), notifications doesn't show up in settings so it suppose to be off.
After the first 4 hours I had lost 24% in standby so push must still be on. So I downloaded netstat again and checked the connections, sure enough push was still there.
Even when rebooting an imapi connection appears with the push connection, then disappears soon after. (funny considering I have no email accounts) maybe it's netstat maybe it's not, but I think the software is bugged somewhere. Bye the way if you turned off all wifi and 3G it is much better but you should to use your iphone like as normal phone without wifi and 3G !!!!
There is no way you can't tell me this is not the software.
Sorry for the rant style post.
Similar Messages
-
My Apple TV all of a sudden refuses to show the movies from my MacBook and says it needs to set time network. What is that?
Welcome to the Apple Community.
The Apple TV should set it's time automatically from the network time server, if it isn't doing this try restarting the Apple TV by removing ALL the cables for a 30 seconds, if this fails try resetting or restoring it. -
I have over 2000 photos on my iPad2. I have backed them up to my PC. How can I delete most of these from my iPad without deleting them one at a time?
The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Cheers, Tom -
HT201250 how can i pass information from one mac to another mac by using the time capsule
how can i pass information from one mac to another mac by using the time capsule
If you want to transfer files, settings, etc., you must open Migration Assistant (Applications > Utilities) in the Mac that you want to transfer the files and follow the instructions
-
I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?
Apple ID's are not device specific, so when you changed it on the iPad 2 it changed it on the iPhone 4 as well, since it's the same account still. What you need to do is create a second Apple ID (so you'll have two accounts, one for iPhone 4 and a seperate one for iPad 2).
To create a new Apple ID on your iPad 2:
1) Go into Settings > Store.
2) If you are already signed in, tap your Apple ID on the screen and you will be given a few options, one of which is to sign out of your account.
3) After you sign out, now click the "Sign in" button.
4) Tap "Create New Apple ID" and follow the instructions on-screen. -
How can I stop my MacBook's iTunes from asking if I want to delete tracks each time I press to play one? Is it a bug from iTunes's version 11.0.5?
Since I dowloaded and installed iTunes' version 11.0.5 on my MacBook, it is behaving strangely:
- displaying an alert message asing if I want to delete tracks each time I press to play one
- not playing tracks in the order they're displayed in my library, sometimes jumping from one playlist to the other
I did check my settings and preferences for playing tracks and tried changing some parameters in them, however it still doesn't help.
It seems to be a bug in iTunes' version 11.0.5 — if you had a similar experience and found how to solve this discomfort, thanks for contacting me.Oui, je parle français. En fait, il semble qu'Apple ait résolu le problème auquel j'étais confronté car ce problème a disparu suite à la mise à jour logicielle d'après (désormais sous Mavericks).
(It seems Apple solved the problem I was facing since this problem disappeared after I updated my software to/under Mavericks). -
I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?
I asked same question
Any answers -
When I use Explored, usually I display my pages in English, but Explore has a feature that you can point any word and it is translated from English to Spanish (one one word at the time, not the complete page), does it is available in Firefox?
I do not know the answer but if you look through the Add-ons under [https://addons.mozilla.org/en-US/firefox/search/?q=translation translate] you may find something suitable. There is of course also the well known Google translate [http://translate.google.com/#es|en|choose%20the%20language%20combinations%2C%20and%20can%20handle%20single%20words%0Awith%20some%20odd%20results service]
-
When ordering enlarged photos from iPhoto, must I purchase them one at a time and pay a shipping fee for each and very one of them. Sort of a ripoff but I can't figure how to purchase many and pay one shipping fee.
You may have better luck posting in the iPhoto forum if no one on this forum is able to assist. I'm sure you are doing something wrong though.
-
I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. To authorize this computer for items purchased from the itunes store, choose, Store > Authorize This Computer. But anytime I authorize it tells me you have authorized including this computer 2 out 5 computers. And if I try again the same story over and over again. But I have many apps on my itunes which I want to transfer. Please someone help me.
Well Authorize the Computer...........
-
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
-
I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the basis for my new macbook ?
The old OS was Mac X 10.5.8. I think the new one is 10.7.2 Lion.Have a read here How do I set up a new Mac from an old one, its backups, or a PC?
Stefan -
How can I get updates for Photoshop CS5 to download to my new Mac book pro where CS5 is already installed from my original disk? I have tried many times over 2 days. I get the same error messages re downloading error. I successfully downloaded the current version of Adobe DNG Converter & it installed perfectly. Help please!
The Adobe auto updater is highly unreliable.
You need to look for and download the update yourself and then manually apply it as per the detailed instructions on the download page:
Adobe - Photoshop : For Macintosh
~~~~~~~~~~~~~~~~~~~~~~
Please note that the Adobe Camera Raw plug-in must be updated separately, after you have updated Photoshop:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh -
I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?
Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I installed Final Cut Epxress 4 on my laptop and my macbook and then accidentally also migrated FCE from the desktop to the macbook. Now each time I launch FCE on the macbook it asks for the software serial number. I enter the number which is then rejetced as it's already been used twice. FCE launches anyway as the licence info had already been written to my hard drive when I first installed FCE. How can I stop it asking for the serial nmber every time I open FCE?
You need to uninstall FCE from you Macbook and then reinstall it.
If you are not familiar with the process, FCS Remover is an app that can uninstall FCE for you.
Maybe you are looking for
-
Is there a limit to the #of appsets one can make?
Right now I have two 2 Appsets and 3 applications on my production server. If I add 2 more appsets...will there be an issue?
-
2nd Gen Nano with blank lit screen
Anyone have any ideas here? My daughters nano still plays, but the screen is on and blank. I restored it and there was no change. I see a small "crack" that she swears is a "scratch"...anyway if anyone has any ideas they would be appreciated!
-
hello I am trying to import an RFC and recieve this error. You cannot create new objects since the system is not the original system of the software component version any ideas? Kfir
-
Hi, had problems with my laptop running bad and all kinds of problems. I decided to re-install the software back to the factory setup when I purchased the laptop. I have a new set of recovery disks I got from HP back then and I had never used them. I
-
Burn MP3 disk with correct stop time
I am trying to burn an MP3 disk with specific start and stop times. I can listen to it just fine on my computer, but the burn to MP3 options does not recognize the specific start/stop times. Any ideas? Windows XP Windows XP