Upconvert from LV 5.0 to LV 2011

I have found an instrument driver in only LV 5.0 format. I need it converted to something that LV 2011 can handle. The zipped folder of vi's is attached.
Attachments:
MP176x_lv.zip ‏1883 KB

Attached. There was some searching for a couple of VIs that were not included in the archive. Don't know if the calling VIs are ones you need.
Attachments:
MP176x.zip ‏1877 KB

Similar Messages

  • Upconvert from LabVIEW 4.02 to LabVIEW 2011

    Wiii, my university library finally managed to find the missing disk from the book "LabVIEW power programming". Now I just wanted to check it out but all the VI's are to old.
    Can someone of NI upconvert them? I uploaded the .zip (with password) containing the VI's on my server because it was to large as attachment.
    Please send me a message for the download link.
    Cheers
    Solved!
    Go to Solution.

    Someone?

  • FireFox is the best internet navigator so far, but starting from this date of July 16th 2011, I'm going back to IE and stop using FF as long as I'm still getting 20 to 25 plugin containers in my Windows Task Manager. Goodbye FF.

    I have been using FF for the last 8 years. Starting from today of July the 16th 2011, I'm going back to IE and say goodbye to FF as long as I'm still getting 20 to 25 plugin containers in my Windows task manager.

    I have the "techie" answer for all of you. According to the tier 2 support at Norton Help Desk, the latest live update from Norton "utilizes Visual Studio 2012 which enables SSE2 instructions" and my processor can not handle that.
    He said they are "working on a solution" and offered to reply back on Wednesday / Thursday this week if a solution could be found...

  • Cannot connect from iMac to Windows Home Server 2011 shares

    Hi guys,
    I am having dificulties connecting from iMac to Windows Home Server 2011 shares.
    First of all it takes so long time to discover the share in iMac, which it's called "mediaserver". After finding it i cannot connect and gives "Connection Failed: message. If i choose "Connect As.." option i wait some time and then pops out with an error: "There was a problem connecting to the server "mediaserver". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
    If i try from Finder -> Go -> Connect to Server ... write in Server Address : smb://mediaserver it fails. But if i write the IP address, like: smb://192.168.1.42 it works after couple of tries. If i try now to Make an Alias for the share i get "The operation can't be completed. An unexpected error occurred (eror code -8060)."
    Has anyone experienced these problems ? I have updated to Mac OS X version 10.7.3. Could that be the problem ?
    Any help will be much appreciated.
    Thank you in advance,
    Simi

    You need to reinstall the updated WHS connector for Mac.  You should then be able to access your shares on WHS 2011. 
    The problem I'm having is I can't get Time Capsule to recognize the WHS 2011 mapped folders that show up on the desktop as a drive, so Backup won't work.

  • When attempting to open a hyperlink to a PDF file on the web from a Microsoft WORD for Mac 2011 (14.3.9) document, Safari 7.0 instead displays the file as text?

    When attempting to open a hyperlink to a PDF file on the web from a Microsoft WORD for Mac 2011 (14.3.9) document, Safari 7.0 instead displays the file as text?

    As seen in http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/has-the-word- 2011-for-mac-invisible-toolbars/018a3ab6-0570-4ad5-abf8-5b6427fdde3e?msgId=e111b f0a-0e32-4fa3-9536-f349dad8439d
    and it worked for me:
    1. Quit Word
    2. In the Finder's menu bar, select Go > Go to folder and type or paste: ~/Library/Preferences/
    3. Click on Go
    4. Locate the preference file com.microsoft.Word.plist, then Option-drag it to the desktop to create a backup copy
    5. Go to Applications/Utilities and open Terminal
    6. Paste the following bold command at the $ prompt (it's a single line):
         defaults write com.microsoft.Word 14\\Toolbars\\Show_HIToolbar -boolean TRUE
    7. Press Return and then quit with Command Q
    8. Start Word and test. If the fix works, trash the backup file in the Desktop file. Otherwise, restore it.
    In the original source the author also mentions the change in Word 2008

  • Please, up convert from LV 5.1 to LV 2011

    Hello,
    I want to convert the attached file from LV 5.1 to LV 2011.
    Could someone help me?
    Thanks
    Attachments:
    Aq6331 Ver5.llb ‏1294 KB

    Mass compiled in 8.2.1, which you can open with 2011.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Aq6331 Ver5.llb ‏709 KB

  • Moving over from Mac Mail to Mac Outlook 2011

    Hi All - I am in the process of moving from Mac Mail to Mac Outlook 2011. Could anyone please advise how I disable Mac Mail. I want to keep all of the old emails there but just start using Outlook 2011. I would happy for any suggestions. I am a bit wary to start trying touring over all of the emails from Mail to Outlook, I think it would be a very long process.
    Sending emails from Outlook is taking a bit of time at the moment, I'm wondering if it is to do with still having Mail sitting there.
    Thanks in advance.

    Hi Loner T
    Thanks so much for your reply. I have taken all of the accounts offline. It does say that the messages are being stored on servers.
    Do you know is it easy or laborious to export the mailbox? I have not done this before.
    Thanks

  • Upconvert from labview 5.1 to 2011

    Hi,
    Can I Have the attached converted to Labview 2011 please?
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    axevents.zip ‏31 KB
    axevents.zip ‏31 KB

    Attached, but you should read the warning from the mass-compile:
    #### Starting Mass Compile: Wed, May 02, 2012 8:00:04 AM
      Directory: "C:\LV Forums\_Upconvert\axevents"
    Search failed to find "Convert OLE Color.vi" previously from "<vilib>:\3dgraph.llb\Convert OLE Color.vi"
      ### Bad VI:    "AXEventsExample.vi"    Path="C:\LV Forums\_Upconvert\axevents\AXEventsExample.vi"
    C:\LV Forums\_Upconvert\axevents\AXEventsExample.vi
        - The Create ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW.  Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
        - The Wait On ActiveX Event From Multiple.vi subVI will not be included in future versions of LabVIEW.  Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
        - The Create ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW.  Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
        - The Destroy ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW.  Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
        - The Destroy ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW.  Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
    #### Finished Mass Compile: Wed, May 02, 2012 8:00:13 AM
    Attachments:
    AXEventsExample.vi ‏12 KB

  • Im swithching from 2007 macbook pro 17" to 2011 macbook pro 17" . Can i clone the old hard drive and use OSX 10.5.8?

    Can I install OSX 10.5.8 on a new macbook pro which comes with Lion? I would like to clone my old hard drive onto the new mac without lion causing compatibility issues????

    trajan2050 wrote:
    What if replace the new 2011 MBP drive with a brand new SSD with snow leopard pre installed?
    Snow Leopard may be possible, depending on whether it was shipped from the factory with SL and had Lion installed in the supply chain, or if it shipped with Lion in the first place. However the SL version would have to be the one which was originally installed or later, which likely means 10.6.7 or.8. The retail 10.6.3 installer won't work, nor will an installation cloned from a different Mac unless it was from the exact same model.
    Plenty of threads around concerning installing SL in place of Lion - do a search. Some have been successful.
    Replacing the HD wouldn't be necessary, and won't make the OS version run the rest of the hardware.

  • Unable to send email from Mac using Outlook for Mac 2011

    I have a single user that cannot send email from the Mac after migrating to Exchange 2013 on-prem. I myself am on the same Exchange server and am using a Mac with Office 2011 and am able to send/receive emails without any issues.
    When the user sends an email it goes to the sent mail folder and syncs with the server and can be seen on a windows machine running any other version of Office (same in OWA). I've logged the user in on my Mac and blown away my profile and seeing the same issue.
    Not sure if this narrows my issue down to the Exchange server receiving the send request from a Mac or if it's some setting in Outlook on the Mac?
    I do not see anything in the logs on the server and have not seen any error son the Mac.
    Any thoughts as to where my issues is? 

    Hi,
    According to your description, I find that there is a single user cannot send email.
    I suggest using Outlook on Windows machine and sending emails via this single user to verify whether the emails can be sent.
    If the single user can send email via Outlook on Windows machine, it seems an issue on the Mac side.
    I suggest asking Outlook for Mac Forum for help so that we can get more professional suggestions.
    For your convenience:
    http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
    If can't send emails in Outlook, it seems an issue on the single user side.
    I suggest trying to access the single user's mailbox via OWA to verify whether the mailbox has been migrated completely.
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • How do you cut and paste tables in and out of Excel from either Mail.app or Outlook 2011?

    When I try to cut and paste a table generated in Excel for Mac into the body of an email the formatting holds but when I send the table is reduced to one column. Same is true for copying from incoming mail into Excel, when I paste into Excel it is reduced to one column rather than keeping the table format. I have tried using mail.app and went out and Outlook 2011 and both programs have the same issue. The reformatting also happens when I forward an email received from a coworker that contains a table, not just on cut and paste operations.
    I need to do this regularly and right now my only option is using my old PC where the cut and paste function keeps formatting between Excel and Outlook just fine. Attaching a pdf or excel file is not an option. There has to be a way to maintain the formatting and being able to extract the tables keeping them intact. Please let me know if you have a solution to maintain this formatting within email programs. Thank you in advance.

    Selecting all does not help - the issue is I need a table within an incoming email to be moved to excel, edited and then pasted back into a new email. "Select All" picks up the email headers, signatures, any messages around the table etc so that doesn't work. Also, as pointed out above Excel doesn't have a select all feature to get the tables back into the body of an email.
    I just tried again going from Excel into Outlook 2011. No luck. All one column down the left side of the email. All columns are removed and text crammed into one column. Just to check I cut from one Excel document and pasted into another and it retained all formating just fine. It is only in and out of Outlook that seems to be the issue.

  • How do I import video from canon zr 500 to iMovie 2011?

    Hello,
    Thank you in advance for your help. I am trying to import a video from a a Canon zr500 to iMovie 2011 for a college course assignment and the camcorder is not being recognized when plugged in via firewire. Does anyone have any advice or suggestions as to how I could accomplish this as cheaply as possible? I am new to using a Mac so please don't be too technical in explanations.
    Thank you,
    Ben

    Freezeframe-
    Either a Thumb Drive or an SD card in the Camera Connection Kit adapter should work.  However SFX is not a file type I'm familiar with.
    How about [Volume name]\DCIS\[filename].[mp4]?  The file name must be 8 characters plus suffix.  It needs to look like it would if it had been recorded in the camera.
    If that doesn't work, perhaps adding another folder will help.  A card from a Canon camera has another folder named "102___12".  That would make the path [Volume name]\DCIS\102___12\[filename].[mp4].
    The more common way to transfer videos to the iPad is using iTunes that had previously synced with it.  Select Movies under LIBRARY on the left side of the iTunes window.  Then you should be able to drag the video file into that window.  The video will be transfered the next time you sync.  This way, the file name is not critical, as long as it has the correct suffix.
    Fred

  • Request to convert multiple files from LV 3.1 to LV 2011 or more

    Dear Friends,
    Can someone please upconvert the attached LabVIEW VI files to LV 2011 or later..?
    Thanks in advance.
    Solved!
    Go to Solution.
    Attachments:
    1287-LV 3.1.zip ‏259 KB

    Saved in 8.2.1, which you can open with anything newer.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Attachments:
    SI1287.zip ‏211 KB

  • Transfer from older (2006) imac to newer (2011) macbook pro

    I have 2006 imac running Snow Leopard (10.6.8). I just bought a 2011 Mac Book Pro running Mavericks.
    Can I use the normal transfer procedure (firewire) to transfer from the older to the newer. The newer already has applications installed.
    Thanks

    Yes.
    Target Disc Mode

  • Upconvertion from labview 5.1 to 2012 - (B)

    Could anyone please upconvert this softwares from Labview 5.1 to a version which can be opened on Labview 2012?
    I would be really grateful.
    I've post another codes on other messages, as I can't attach all of them at once due to the forum limitation of 6 Mb for the attachments. Not that this is the part (B), with different content from part (A).
    Once again sorry for that, that's the only way I've found so far.
    Thanks in advance!
    Attachments:
    ProgramsB.zip ‏3307 KB

    Mass compiled in 8.2.1, which you can open with 2012.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    ProgramsB.zip ‏2756 KB

Maybe you are looking for