Upconvert from LV 5.1 to 2012

Hi,
Could someone upconvert this VI from LV 5.1 to 2012 please?
Thankyou
Rhys
Solved!
Go to Solution.
Attachments:
EXAMPLE1.VI ‏156 KB

I was missing a DLL, but here are the files saved in 8.2.1, which 2012 can read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
EXAMPLE1.VI ‏43 KB
DEVA001.LLB ‏67 KB

Similar Messages

Upconvertion from labview 5.1 to 2012 - (B)

Could anyone please upconvert this softwares from Labview 5.1 to a version which can be opened on Labview 2012?
I would be really grateful.
I've post another codes on other messages, as I can't attach all of them at once due to the forum limitation of 6 Mb for the attachments. Not that this is the part (B), with different content from part (A).
Once again sorry for that, that's the only way I've found so far.
Thanks in advance!
Attachments:
ProgramsB.zip ‏3307 KB

Mass compiled in 8.2.1, which you can open with 2012.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
ProgramsB.zip ‏2756 KB

Upconvertion from labview 5.1 to 2012 - (A)

Could anyone please upconvert this softwares from Labview 5.1 to a version which can be opened on Labview 2012?
I would be really grateful.
I'll have to post another codes on extra messages, as I can't attach all of them at once due to the forum limitation of 6 Mb for the attachments.
I wish you understand, sorry for that.
Thanks in advance!
Attachments:
ProgramsA.zip ‏4049 KB

Mass compiled in 8.2.1, which you can open with 2012.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
ProgramsA.zip ‏3251 KB

Upconvertion from labview 5.1 to 2012 (Composed RAR File)

Could anyone please upconvert this softwares from Labview 5.1 to a version which can be opened on Labview 2012?
Here I had to create a composed ZIP file with 3 parts to be able to upload within the upload size limit. The forum doesn't accept RAR at all.
Here attached the main part called "_Incoming Inspection.zip".
The other parts follows in the messages: "_Incoming Inspection01.z" and "_Incoming Inspection02.z". But they have to be renamed, as the forum also does not accept the extensions for composed ZIP files (i.e. .z01 .z02 .z03 etc.), I've renamed them. So please rewrite their names as:
From "_Incoming Inspection01.z" to "_Incoming Inspection.z01"
From "_Incoming Inspection02.z" to "_Incoming Inspection.z02"
I've used WinRAR to compose the ZIP files.
Sorry for this BIG incovenience, but that's the way I figured out how to solve it, and have the files converted for working with them.
You guys in the forum are doing a pretty good work, congrats!
Really many thanks to you!
Rodolfo Machado.
Solved!
Go to Solution.
Attachments:
_Incoming Inspection.zip ‏4897 KB

I've rearrenged the content to 4 parts with normal zip format (WinRAR can unpack all of them).
I think now it should work, you can mass compile each of them separately.
So hereunder the files come, two of them in this message and other two in the next ones.
Thanks in advance crossrulz!
PS: about downloading the version 8.2.1 as you suggested, I didn't get the proper link using the search feature of NI website.
Attachments:
WEP_LABCE.zip ‏2557 KB
_GR & TKE sys adapter manager.zip ‏215 KB

Copy Templates from VMM 2008 to VMM 2012 R2

Hi,
I would like to know if it was possible to copy Templates from VMM 2008 to VMM 2012 R2 ?
Thank you

I have never tried this, but you can for sure re-use the physical objects like VHD's, ISO's etc.
The template configuration and profiles are metadata stored in the database.
Based on how things changed with VMM 2012 compared with 2008, you will have several new options and capabilites in the profiles for 2012.
I would recommend you to re-create those (hardware profiles, guest os profiles, application profiles etc) in 2012, as there is no logical mapping from the previous versions.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Best practice for client migration from SMS 2003 to SCCM 2012 R2?

Can anyone advise what the most recommended method is for migrating SMS 2003 clients (Windows 7) to SCCM 2012 R2?
Options are:
1. SMS package to deploy ccmclean.exe to uninstall SMS 2003 client. Deploy SCCM 2012 R2 client via SCCM console push.
2. Simply push SCCM client from console installing over existing SMS 2003 client.
I am finding some folks saying this is ok to do but others saying no it is not supported by Microsoft. Even if it appears to work I do not want to do it if it is not supported by Microsoft. Can anyone provide a definitive answer?
3. Use a logon script or Group Policy preference to detect the SMS client and delete it using CCMclean and then install the SCCM client.
Appreciate any feedback. Thank you.

Hi,
>>I am finding some folks saying this is ok to do but others saying no it is not supported by Microsoft. Even if it appears to work I do not want to do it if it is not supported by Microsoft. Can anyone provide a definitive answer?
I haven't seen any official document records the option 2 method. There is only upgrading from SCCM 2007 to SCCM 2012 directly.
I think you could use a logon script or Group Policy preference to detect the SMS client and delete it using CCMclean.exe. Then use SCCM 2012 to discover these computers and push clients to them.
Best Regards,
Joyce

Migrating Data from MySQL to SQL Server 2012

Hi all,
I'm Migrating a database from MySQL to SQL Server 2012, using SSMA for MySQL v5.2.1258. I've got the schema migrated over and have resolved any migration issues (stored procedures / views), but when it comes to migrating over the data I'm just hitting
a wall.
None of the data is migrating and when the migration report is displayed every table has a red x against it's Status. The Output box has the following:
Data migration operation has finished.
0 table(s) successfully migrated.
0 table(s) partially migrated.
64 table(s) failed to migrate.
I've seen on the forum that someone else was having the same problem
(http://social.msdn.microsoft.com/Forums/en-US/sqlservermigration/thread/b835f4b3-3d93-42a4-9b6b-d21d3dfd8dab/)
I've set the project settings mode to default, still getting the same error and tried using both Client Side Data Migration and Server Side migration, with both giving the same result. I've tried going through the step-by-step blog as well.
I am doing something really stupid? There are 64 tables, so don't really want to try doing exports from each table and importing it into the new database.
Hope someone can help.
Cheers
Alex

Hello,
I don’t have suggestions for you, but you can try contacting the SQL Server Migration Assistant (SSMA) Team via e-mail ([email protected])
to see if they can provide a solution on this scenario.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

I upgraded to the Samsung Galaxy S5 two months ago. I'm still unable to sync or move contacts from the phone into my 2012 Toyota Camry. I've been to the dealership to have them look at my car. It also has been tried in 2 different 2014 models. I don't kno

I upgraded to the Samsung Galaxy S5 two months ago. I'm still unable to sync or move contacts from the phone into my 2012 Toyota Camry. I've been to the dealership to have them look at my car. It also has been tried in 2 different 2014 models. I don't know if it's a Verizon/Samsung issue but I'm quite upset about it. I would have stayed with the S4 if I had know so many issues were on the horizon. I need a fix. Please help.@

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Steps SSIS and SSAS Migration from sql server 2005 to 2012?

steps SSIS,SSRS and SSAS Migration from sql server 2005 to 2012? any precautions to take while migration.
any documentation or any specified steps.

Hi Vijay,
According to your description, you want to migrate SQL Server Integration Services and SQL Server Analysis Services from SQL Server 2005 to SQL Server 2012.
For how to migrate SQL Server Integration Services, please refer to the article:
http://www.bidn.com/blogs/DevinKnight/ssis/2718/upgrading-packages-to-ssis-2012.
In addition, since the issue regards SQL Server Integration Services. I suggest you post the question in the SQL Server Integration Services forums at
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlintegrationservices.
For how to migrate SQL Server Analysis Services, please refer to this article:
http://www.codeproject.com/Articles/435703/Migration-from-SQL-server-to.
In addition, since the issue regards SQL Server Analysis Services. I suggest you post the question in the SQL Server Analysis Services forums at
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlanalysisservices. It is appropriate and more experts will assist you.
Regards,
Michelle Li

HT3275 Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use? This has prevented my time machine from backing up from this morning (5th Dec 2012).

Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use."?
As of yesterday (4th Dec 2012) everything was fine, no trouble or problems at all. Wake up this morning, turn on the computer and when it came time to backup itself, the message occurred above and this has prevented my time machine from backing up from this morning (5th Dec 2012) ever since then.
Everything on my computer is up-to-date but this problem still persists displaying this message practically every hour, on the hour and nothing is getting backedup!
If you know what is going on and more importantly, how to fix this, I would be indebted to you for sharing your knowledge with me on this subject.
Thank you.

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C12.html

Conversion from SQL 2005 to SQL 2012 Express

Looking to move a small database from SQL 2005 to SQL 2012 Express - can a 2005 backup file be restored to a newly created 2012 Express database file?

Are you using 2005 express? Yes, you can do that
http://technet.microsoft.com/en-us/library/ms177429.aspx
Note that if you restore a SQL Server 2005 or SQL Server 2008 database to SQL Server 2012, the database is automatically
upgraded.
Also you
cannot
do a cross
edition restore i.e. from enterprise edition (2005) backup to 2012 express
Satheesh
My Blog

Migrating from DHCP 2003 to DHCP 2012

Hi,
i'm planning to migrate from DHCP 2003 to DHCP 2012 or DHCP 2012 R2 failover.
Saw those instructions:
extract the configuration in .TXT
netsh dhcp server export c:\temp\dhcp.txt all
copy this file on your server 2012 in temp or elsewhere
import the configuration with this command
netsh dhcp server import c:\temp\dhcp.txt all
if you have the error "TLS supported but not configured"
remove all the option in "Server Option" like 003 Router 006 DNS SERVERS and put it back after doing the import
now i have some questions:
1. is it recommended to build 2 2012 DHCP configured as failover on virtual machines ? (hyper-V)
2. do those dhcp servers have to or recommended to be DNS also or can they be only DHCP servers ?
3. my AD functionality level is 2003 - is it a problem for this migration ?
4. virtual or physical ? whats is recommended ?
5. any other considerations ?
TNX

Hi,
Virtual or physical will both work. It doesn't matter, as long as the two servers can communicate with each other.
You do not need DNS installed on the same server, but you can install it without hurting anything.
I believe that the AD level has no effect because you can have DHCP failover even on workgroup computers.
-Greg
http://technet.microsoft.com/en-us/library/dn338983.aspx#specs

Conversion from LabVIEW 2014 to LabVIEW 2012

Couls someone convert me this file from LB 2014 to the 2012 version, please?
Solved!
Go to Solution.
Attachments:
Ejercicio Optativo.vi ‏38 KB

Saved for 2012.
Adam
CLD & CTD
Attachments:
Ejercicio Optativo.vi ‏27 KB

Client Migration from SCCM 2007 to SCCM 2012 via GPO

what
installation properties i can use to migrate client from sccm 2007 to sccm 2012 via gpo?
Thanks!!
Atenciosamente Julio Araujo

It all depends on your needs, I suggest that you look at this first :
All properties can be set by using GPO, it's not different from push.
http://technet.microsoft.com/en-us/library/bb632469.aspx
http://technet.microsoft.com/en-us/library/bb633010.aspx
http://social.technet.microsoft.com/wiki/contents/articles/25118.deploying-sccm-2012-r2-clients-using-group-policy.aspx
Benoit Lecours | Blog: System Center Dudes

Migrating Clients from SCCM 2007 to SCCM 2012 R2 via GPO

Hello.
I can do the migration of customers from SCCM 2007 to SCCM 2012 via GPO?
When I'm migrating customers from SCCM 2007 to SCCM 2012 I have to keep the boundaries of SCCM 2007 or just the SCCM 2012?
Atenciosamente Julio Araujo

For migrating the clients you can use any client deployment method that's available (see for planning your strategy: (http://technet.microsoft.com/en-us/library/gg712283.aspx).
During the client migration I would also start with migrating your boundaries. The most important thing is that you have no overlapping boundaries for site assignment when you are using auto assignment.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Upconvert from LV 5.1 to 2012

Similar Messages

Maybe you are looking for