Upconvert LV 7.1 to LV 2011 method

Hello:
I have many LabView 7.1 vi to convert to 2011. Can you suggest the best method to accomplish this?
Thank you

LV 2011 can open LV 7.1 files just fine.

Similar Messages

Need help to upconvert LabVIEW 3.1 to LabVIEW 2011

Hello,
I will be greatly appreciate it if anyone can help me convert the LV file from version 3.1 to version 2011.
Thanks.
Attachments:
HP8510A.LLB ‏2916 KB

Sorry

Upconvert from labview 5.1 to 2011

Hi,
Can I Have the attached converted to Labview 2011 please?
Thanks
Solved!
Go to Solution.
Attachments:
axevents.zip ‏31 KB
axevents.zip ‏31 KB

Attached, but you should read the warning from the mass-compile:
#### Starting Mass Compile: Wed, May 02, 2012 8:00:04 AM
Directory: "C:\LV Forums\_Upconvert\axevents"
Search failed to find "Convert OLE Color.vi" previously from "<vilib>:\3dgraph.llb\Convert OLE Color.vi"
### Bad VI:    "AXEventsExample.vi"   Path="C:\LV Forums\_Upconvert\axevents\AXEventsExample.vi"
C:\LV Forums\_Upconvert\axevents\AXEventsExample.vi
    - The Create ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
    - The Wait On ActiveX Event From Multiple.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
    - The Create ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
    - The Destroy ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
    - The Destroy ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
#### Finished Mass Compile: Wed, May 02, 2012 8:00:13 AM
Attachments:
AXEventsExample.vi ‏12 KB

LabVIEW 3.0.1 to 2011?

Hi!
I am a beginner in LabVIEW and I should write a new VI for a solar cell in our university. It is used for experiments for other students. But unfortunately the devices are very old ( Keithley 228a and 199 ). So there are some problems using GPIB and an Agilent 82357B. So, for better understandings what is going on there and to get started I can use the old VI.
And that's why I need your help here.
The old VI was written in LabVIEW 3.0.1 and is still running on windows 3.11. When I try to open the .llb I can only see the frontpanel without any possibilities to edit the block diagram. shortcuts like ctrl+e or f didn't work. In the help section of LV 2011 I could see that it's not possible to upconvert such an old VI to 2011. Actually I just need to see the block diagram on the VI, that would be a big help. Maybe some of you still have and old LV Version to help me get the block diagram or even convert it to 2011, if possible.
I found another topic with the same problem in windows 3.11 and LabVIEW 3.0.1. But for me, the shortcuts ( http://forums.ni.com/t5/LabVIEW/In-LabVIEW-3-0-1-how-to-open-a-VI-diagram-opens-panel-only/m-p/53784... ) - last post- didn't work. Maybe LV 3.0.1 used some other shortcuts.
Thanks in advance.
Greetings from germany
Marco
Solved!
Go to Solution.
Attachments:
PVKENN.LLB ‏616 KB

Sorry for doublepost.
I tried to stop the vi by pressing ctrl + period but nothing happens. I hear the hdd doing something by pressing ctrl + x like cut and paste. But other commands didn't work.
So I tried to use the VI as a subVI. At first, it worked to put the VI to the diagram. When I open the VI with ctrl + doubleclick I get an error. I try to translate it:
LabVIEW Caused a General Protection Fault in <unknown> "185F:BADBILabview will be closed.
I've read something about it and maybe it's a problem caused by low memory. Cause after that errormessage, I can't start labview anymore and have to restart the computer. A message appears "unable to start the application because you need at least 4096000 bytes of memory. "
But I think actually I could open the VI with ctrl-doubleclick on the subVI. But I don't know if it would open the diagram or again the runmode of the whole VI.
I will try this again and hope that I can open it just once. Any other ideas? Maybe I don't have the rights to open the diagram?
again, thank you for your help!
EDIT:
I could open the VI now, but again it opens just the whole VI without title- or menubar. I tried to open it with ctrl + doubleclick but it seems that ctrl doesn't have any effect. By just doubleclicking the VI it opens the same way.

Run VI method in runtime engine 2011

Is this method still valid in the runtime engine 2011?
Following this post for LV8.6
http://zone.ni.com/reference/en-XX/help/371361E-01/lvprop/vi_run_vi/
After I build my VI with the execution builder, the run VI method doesn't work anymore with the runtime 2011..?

Steve,
Ooops, indeed, I forgot to wire the error handler on this method. I get some error now when aborting the running vi (I think).
See attachment.
Attachments:
Simple OI - Top-Level VI.vi ‏48 KB

2011 outlook gives the following error: "Authentication failed because Outlook doesn't support any of the available authentication methods."

Upgraded my computer to 10.9.2 Mavericks and now my 2011 outlook gives the following error: "Authentication failed because Outlook doesn't support any of the available authentication methods." Anybody know how to fix it? Thank you.

I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server.

What is the easiest method to convert your Outlook Mail from MS Office 2011 for mac, into Apple Mail?

What is the easiest method to convert your Outlook Mail from MS Office 2011 for Mac, into Apple Mail?

As best I can see from googling it, there is NO easy direct way with Apple's builtin tools. If you Google it you will find that many software companies are selling Apps specifically designed for this purpose. Good luck.
Hope this helps

CRM 2011 openStdWin method

Hi,
I'm having a problem with a some client code (web resource) that opens a window from the main application ribbon of CRM 2011.
It works in the browser but not in the outlook client and I have an idea as to why but not how to fix it.
Before my code opens the window it checks whether or not it is running from the outlook client - if so the openStdWin method is used:
var my_win = openStdWin(window_url, window_name);
If not the normal window.open method is used:
var my_win = window.open(window_url, window_name, window_settings);
In both cases a window opens, but since I have to (after the window opens) call a method inside this new window:
my_win.methodName();
my_win has to be an actual window object which is it when I use window.open but apparently not when I use openStdWin.
Because of this my code breaks at the point where in attempt to call the method in the newly opened window when running from outlook client.
Can anyone shed some light on this - maybe this method is supposed to be used in another fashion?
PS. when I close down outlook after a failed attempt I get the option to send an error report to Microsoft which contains the following:
Microsoft Dynamics CRM Error Report Contents
<CrmScriptErrorReport>
<ReportVersion>1.0</ReportVersion>
<ScriptErrorDetails>
<Message>Permission denied</Message>
<Line>1</Line>
<URL>/_grid/OutlookRibbonContextGrid.aspx?etn=account&ver=63475613997005</URL>
<PageURL>/_grid/OutlookRibbonContextGrid.aspx?etn=account&ver=63475613997005</PageURL>
<Function></Function>
<CallStack>
</CallStack>
</ScriptErrorDetails>
<ClientInformation>
<BrowserUserAgent>Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; Microsoft Outlook 14.0.6117)</BrowserUserAgent>
<BrowserLanguage>en-us</BrowserLanguage>
<SystemLanguage>da</SystemLanguage>
<UserLanguage>da</UserLanguage>
<ScreenResolution>1920x1200</ScreenResolution>
<ClientName>Outlook Laptop - Online</ClientName>
<ClientTime>2012-06-18T13:00:14</ClientTime>
</ClientInformation>
<ServerInformation>
<OrgLanguage>1033</OrgLanguage>
<OrgCulture>1030</OrgCulture>
<UserLanguage>1033</UserLanguage>
<UserCulture>1030</UserCulture>
<OrgID>{CBFE2AD6-1D2D-4AC4-BC17-5A9998BBA17F}</OrgID>
<UserID>{8EFA7A51-B614-4CB6-868D-A587AB77521B}</UserID>
<CRMVersion>5.0.9688.1561</CRMVersion>
</ServerInformation>
</CrmScriptErrorReport>
The message says "Permission denied" but I think that is a little misleading because the object simply isn't there or rather it is an empty object.
If I do this alert(JSON.stringify(my_win)) when using window.open I get a dialog with a full window object (or as much as the dialog can show) but when I use openStdWin i get "{}" which is an object but an empty one.

Thanks for your reply Scott,
I am using absolute URL. The 1st part is provided by the build-in getServerUrl (in the Xrm.Page API) and the rest of the URL is a static path to a HTML Web Resource, so there should be no cross-domain stuff going on. (it is CRM 2011 Online by the way).
The HTML Web Resource does include some javascript files but they are all Web Resources in the same solution (referenced by relative path).
Right now I actually have a working solution I made yesterday, but that was by doing a work-around. Roughly what I
was doing in the first place was:
1) open the window and when window was loaded ask the opening window/code (javascript) to build and execute a query.
2) upon completion of the query, message back to the opened window (via my_win.someMethod()) that the result was ready to use.
The reason for doing it this way was to ensure that the opening window markup would be fully loaded and look nice (and display a progress indicator etc.) before starting to execute the query, which could make the window appear as not responding or just make
it not load right away, which looks ugly.
Secondly, the result from the query (an array of simple objects) needs to be merged with a larger array which the opened window already holds due to the javascript files it references.
What I am now doing in the work-around is to have the opening window build and execute the query itself, since that eliminates the need to call a method on the window object which is null (or I
do not have access to for what ever reason).
Since this works I cannot see what illegal or cross-domain stuff there should be going on in the original version. The only difference between the 2 versions is that in the 2nd version, once the window is opened, I don't need the window object for anything,
like it did in the 1st version.
I still like the 1st version better, so I'm still interested solving the mystery about the missing window object from openStdWin.

Travelling to UK/Ireland later in 2011. Want to know least expensive method to use 3G service in those countries?

Travelling to UK and Ireland later in 2011. Wish to know the least expensive method to use 3G service, for one month, in those countries.

In the UK you'll have a lot of choice. You can literally walk into any mobile network's retail store and get a Micro-SIM on the spot.
Here's some specific network details:
http://shop.o2.co.uk/ipadtariffs/
http://www.three.co.uk/Mobile_Broadband/iPad/iPad_data_plans
http://shop.vodafone.co.uk/shop/mobile-broadband-devices/apple-ipad-microsim
http://shop.orange.co.uk/ipad/ipad-choose-your-plan
Here's a web-site that compares some of the top iPad SIMs:
http://www.broadbandgenie.co.uk/mobilebroadband/ipad

Upconvert from LabVIEW 4.02 to LabVIEW 2011

Wiii, my university library finally managed to find the missing disk from the book "LabVIEW power programming". Now I just wanted to check it out but all the VI's are to old.
Can someone of NI upconvert them? I uploaded the .zip (with password) containing the VI's on my server because it was to large as attachment.
Please send me a message for the download link.
Cheers
Solved!
Go to Solution.

Someone?

Upconvert from LV 5.0 to LV 2011

I have found an instrument driver in only LV 5.0 format. I need it converted to something that LV 2011 can handle. The zipped folder of vi's is attached.
Attachments:
MP176x_lv.zip ‏1883 KB

Attached. There was some searching for a couple of VIs that were not included in the archive. Don't know if the calling VIs are ones you need.
Attachments:
MP176x.zip ‏1877 KB

What is the best method for moving to a new Retina MacBook Pro from an Early 2011 15-inch MacBook Pro using Migration Assistant?

I'd like to transfer all data to the new MacBook as seamless as possible. Don't want to reinstall software. Using Migration Assistant in past was successful, but I always used Firewire or Ethernet.
Apple's Thunderbolt cable is too expensive at $49. Wifi is way too slow. (Transfering my 500GBs was going to take over 100 hours.) Do I need to get a Thunderbolt-to-Gigabit Ethernet adapter and cable? That's about the same price as the Thunderbolt cable. Is transfer over USB 2 possible? Would I be better off restoring from my Carbon Copy Clone on my USB 2 external drive?
I do not use Time Machine.

Stephen Coles wrote:... Do I need to get a Thunderbolt-to-Gigabit Ethernet adapter and cable?
That's what I used, although I already had the ethernet cable. Just directly connected both machines (after turning off Airport on the old one), no router or anything else, and ran Migration Assistant on both ends. Transfered a user account with about 30Gb data, nothing else.

How to select a specific column in a bean method?

Hey everyone,
I'm trying to select a specific column in my adf table so i can hightlight the ones i can after, with a method bean that does a match from another table. I'm using JDeveloper 12.1.2.0.0.
Here's my table at the moment (its a static list that Timo and Alejandro helped me create, thanks to them again!):
<af:table value="#{bindings.Anos1.collectionModel}" var="row"
                                                          rows="#{bindings.Anos1.rangeSize}"
                                                          emptyText="#{bindings.Anos1.viewable ? 'No data to display.' : 'Access Denied.'}"
                                                          rowBandingInterval="0" fetchSize="#{bindings.Anos1.rangeSize}"
                                                          filterModel="#{bindings.Anos1Query.queryDescriptor}"
                                                          queryListener="#{bindings.Anos1Query.processQuery}"
                                                          filterVisible="false" varStatus="vs" id="t5"
                                                          styleClass="AFStretchWidth" columnSelection="multiple"
                                                          inlineStyle="max-width:100%;" columnStretching="multiple"
                                                          columnSelectionListener="#{ControlBean.onAnoColumnSelect}"
                                                          disableColumnReordering="true"
                                                          binding="#{ControlBean.dimAnos}">
                                                    <af:column sortProperty="#{bindings.Anos1.hints.A2011.name}"
                                                               filterable="true" sortable="false"
                                                               headerText="2011"
                                                               id="c54" width="16%">
                                                        <af:outputText value="#{row.A2011}"
                                                                       shortDesc="#{bindings.Anos1.hints.A2011.tooltip}"
                                                                       id="ot54">
                                                            <af:convertNumber groupingUsed="false"
                                                                              pattern="#{bindings.Anos1.hints.A2011.format}"/>
                                                        </af:outputText>
                                                    </af:column>
                                                    <af:column sortProperty="#{bindings.Anos1.hints.A2012.name}"
                                                               filterable="true" sortable="false"
                                                               headerText="2012"
                                                               id="c55" width="16%">
                                                        <af:outputText value="#{row.A2012}"
                                                                       shortDesc="#{bindings.Anos1.hints.A2012.tooltip}"
                                                                       id="ot55">
                                                            <af:convertNumber groupingUsed="false"
                                                                              pattern="#{bindings.Anos1.hints.A2012.format}"/>
                                                        </af:outputText>
                                                    </af:column>
                                                    <af:column sortProperty="#{bindings.Anos1.hints.A2013.name}"
                                                               filterable="true" sortable="false"
                                                               headerText="2013"
                                                               id="c56" width="16%">
                                                        <af:outputText value="#{row.A2013}"
                                                                       shortDesc="#{bindings.Anos1.hints.A2013.tooltip}"
                                                                       id="ot56">
                                                            <af:convertNumber groupingUsed="false"
                                                                              pattern="#{bindings.Anos1.hints.A2013.format}"/>
                                                        </af:outputText>
                                                    </af:column>
                                                </af:table>
I've deleted some of the columns because they are all equal and by doing so, you have less problems in reading it.
In my method i have a matchEm but i'm trying to select a column by using this line:
        dimAnos.setColumnSelection("A2012");
dimAnos is the binding for my table Anos (Years in Portuguese). I even tried another values fro the columnSelection but i couldn't make it selected. Am i doing anything wrong?
Please help me or give me an idea of how can i do this.
Regards,
Frederico.

Hi Frederico,
The method setColumnSelection is meant to set whether your table supports column selection or not. It doesn't select the column. In order to select the column, you need to set the column attribute Selected to true. So I don't know if its an option for you but you can create a binding to all the columns you have in you bean, and then call the method A2012.setSelected(true), and then add a partial target to the table to re render it and show the selected column.
Hope this helps

Calling a method on backing bean in response to contextual event

Hi
I am using Jdeveloper 11.1.1.6.0 and using ADF contextual events..
I have a drop down list and i am rasiing a contextual event on changing the current selection. In response to that event i want to call a backing bean method with parameters.. But when i click on the subscriber section for the contextual event, i can see only some bindings of the page.. How can i call a method on backing bean as a subscriber..
Thanks
Raghu

Hi,
this article has a use case for the POJO approach: http://www.oracle.com/technetwork/issue-archive/2011/11-may/o31adf-352561.html
Another is to define a method binding in the receiving PageDef file and configure it as explained here
http://java.net/projects/smuenchadf/pages/ADFSamplesBindings/revisions/3#SMU164
Frank

Error while running Java application using Crystal Reports 2011

Hello,
I would like to ask for your help.
Environment details:
Java based standalone application in Development environment.
Crystal Reports 2011 (no SP applied)
Oracle 11g ( 32 bit client installed)
Win7 64 bit OS.
Workflow:
While running the java application, which will display the reports I am getting the below mentioned error. I guess that is because I am missing the Crystal runtimes (Correct me if I am wrong).
I know that CR2011 do not have any sdks/ jar available for deployment. In this case, which runtimes should I be using? Does installing CR2011 be enough in the development box?
Please provide me the link from which I can download the same.
Let me know if I need to provide more details on this. Any suggestions are most welcome.
Thank You.
Code used:
reportClientDoc = new ReportClientDocument();
System.err.println("Opening the Report ");
reportClientDoc.open(REPORT_PATH, 0);
// this is where the error or exception is thrown
_Error: _
log4j:WARN No appenders could be found for logger (com.crystaldecisions.reports.reportdefinition.ReportDocument).
log4j:WARN Please initialize the log4j system properly.
com.crystaldecisions.sdkreport.lib.ReportSDKException: com/businessobjects/reports/jdbinterface/common/DBException---- Error code:-2147467259 Error code name:failed
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:286)
                at com.businessobjects.sdk.erom.jrc.a.<init>(SourceFile:43)
                at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:46)
                at com.crystaldecisions.proxy.remoteagent.RemoteAgent.<init>(SourceFile:703)
                at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662)
                at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632)
                at com.crystaldecisions.sdk.report.application.ClientDocument.if(SourceFile:504)
                at com.crystaldecisions.sdk.report.application.ClientDocument.open(SourceFile:669)
                at com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source)
                at rp.batch.bo.RpJRCExportReport.runReportExport(RpJRCExportReport.java:517)
                at rp.batch.bo.RpSchedReportRun.process(RpSchedReportRun.java:163)
                at rp.batch.bo.RpSchedReportRun.drive(RpSchedReportRun.java:240)
                at rp.batch.bo.RpSchedReportRun.main(RpSchedReportRun.java:265)
Caused by: java.lang.NoClassDefFoundError: com/businessobjects/reports/jdbinterface/common/DBException
                at com.crystaldecisions.reports.queryengine.Session.a2(SourceFile:244)
                at com.crystaldecisions.reports.datafoundation.DataFoundation.do(SourceFile:376)
                at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.do(SourceFile:111)
                at com.crystaldecisions.reports.dataengine.datafoundation.CreateDataConnectionCommand.new(SourceFile:81)
                at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
                at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
                at com.businessobjects.reports.reportconverter.v12.e.a(SourceFile:442)
                at com.businessobjects.reports.reportconverter.v12.e.a(SourceFile:231)
                at com.businessobjects.reports.reportconverter.v12.d.m(SourceFile:192)
                at com.businessobjects.reports.reportconverter.v12.f.if(SourceFile:210)
                at com.businessobjects.reports.reportconverter.v12.V12SaveLoader.a(SourceFile:242)
                at com.businessobjects.reports.loader.ReportLoader.a(SourceFile:205)
                at com.businessobjects.reports.sdk.JRCReportLoader.a(SourceFile:137)
                at com.businessobjects.reports.sdk.JRCReportLoader.a(SourceFile:76)
                at com.businessobjects.reports.sdk.requesthandler.ReportDocumentRequestHandler.a(SourceFile:136)
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:229)
                ... 12 more
Caused by: java.lang.ClassNotFoundException: com.businessobjects.reports.jdbinterface.common.DBException
                at java.net.URLClassLoader1.run(URLClassLoader.java:200)
                at java.security.AccessController.doPrivileged(Native Method)
                at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
                at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
                at sun.misc.LauncherAppClassLoader.loadClass(Launcher.java:301)
                at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
                at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
                ... 28 more

Help me ...
Ambient:
Crystal Reports Viewer 14.0.0.0
java.vendor = Sun Microsystems Inc.
java.version = 1.6.0_37
os.name = Windows NT (unknown)
os.version = 6.2
os.arch = amd64
Exception:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects.sdk.erom.jrc.ReportAgentFactory---- Error code:-2147215357 [CRSDK00000026] Error code name:internal
          at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(ReportSDKException.java:112)
          at com.crystaldecisions.proxy.remoteagent.RemoteAgent.createDefaultAgent(RemoteAgent.java:1000)
          at com.crystaldecisions.sdk.occa.report.application.ClientDocument.initRemoteAgent(ClientDocument.java:770)
          at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(ClientDocument.java:961)
          at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.open(ReportClientDocument.java:226)
          at src.HelloWorldSwing.createAndShowGUI(HelloWorldSwing.java:54)
          at src.HelloWorldSwing.main(HelloWorldSwing.java:24)
Source:
import java.awt.BorderLayout;
import javax.swing.JFrame;
import com.crystaldecisions.ReportViewer.ReportViewerBean;
import com.crystaldecisions.sdk.occa.report.application.DatabaseController;
import com.crystaldecisions.sdk.occa.report.application.OpenReportOptions;
import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.IConnectionInfo;
import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;
public class HelloWorldSwing {
           * @param args
          public static void main(String[] args) {
                    HelloWorldSwing pgm = new HelloWorldSwing();
                    try {
                              pgm.createAndShowGUI();
                    } catch (Exception e) {
                              e.printStackTrace();
                              //JOptionPane.showMessageDialog(null, e.toString());
           * @throws Exception
          public void createAndShowGUI() throws Exception {
                    // Make sure we have nice window decorations.
                    JFrame.setDefaultLookAndFeelDecorated(false);
                    // Create and set up the window.
                    JFrame frame = new JFrame("HelloWorldSwing");
                    frame.setTitle("Titolo del Report");
                    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                    ReportViewerBean viewer = new ReportViewerBean();
                    viewer.init(new String[0], null, null, null);
                    ReportClientDocument rpt = new ReportClientDocument();
                    rpt.setReportAppServer(ReportClientDocument.inprocConnectionString); // inproc:jrc
                    rpt.open("Report.rpt", OpenReportOptions._openAsReadOnly);
                    IReportSource rptSource = rpt.getReportSource();
                    viewer.setReportSource(rptSource);
                    frame.getContentPane().add(viewer, BorderLayout.CENTER);
                    frame.setSize(1930, 1030);
                    frame.setVisible(true);
                    viewer.start();

Upconvert LV 7.1 to LV 2011 method

Similar Messages

Maybe you are looking for