Upconvert Third Party Instrument Driver

Attached is a 3rd party instrument driver contained within a .llb that has multiple VIs used to control a GPIB device. I have attached the .llb below.
Source Version: 5.0.1
Target Version: 2011 SP1 (or 8.2 and above would be fine)
Thanks for your time.
Solved!
Go to Solution.
Attachments:
wcl488v1.llb ‏863 KB

attached as 8.2
Attachments:
wcl488v1.llb ‏432 KB

Similar Messages

How can I install OSX on a new third-party hard drive in my Macbook Pro?

I'll start off by saying that I bought my MBP (Mid 2009, 13 inch) used two years ago, and the seller never thought to mention that he had installed a third party hard drive not long before selling it to me... First problem.
Anyway, the hard drive crashed. I'm installing a new hard drive, but I'm worried about getting back to having Mountain Lion. I'm confused by the process - Some say I can start by ordering a retail copy of Snow Leopard on Amazon, some say I need the OS disc that originally came with the computer (which obviously I don't have), and some make it seem as if there's a special version of Snow Leopard I need to order from the Apple store?
Help.

There is no special version of Snow Leopard (other than what ships with a Mac of that vintage). There is a regular retail version. It is a good idea to have a copy.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After you install the new hard drive boot the computer from the OS disk, and install OS 10.6.
If you want a more recent OS, sign in to the App Store - use the same ID and password you have used here.
There you can download Yosemite, it's free.
I assume your MBP meets the requirements for Yosemite. If it does not, or if you want an earlier OS than 10.10, you should be able to find it at the App store.

NI UMI-7772 and third party Stepper Drives

Dear all
Now we want to control a stepper motor with voltage ratings up to 110 V and 0.5 A at 110 V
we have the 2 Axis PCI-7342 motion controller and the NI UMI-7772 Terminal block for third party motor drives
please advice , what is the suitable third-party stepper drive that can fullfill the above ratings and compatible with the UMI-7772 ??
i have found only one link for a company called ParkerMotion (check this link : http://www.parkermotion.com/literature/pdf/aries.pdf ) but I'm not sure if it is compatible with the UMI-7772 or not
waiting your replies and thanks in advance
Eng. Mohammed Ashraf
Certified LabVIEW Associated Developer
InnoVision Systems Founder, RF Test Development Engineer
www.ivsystems-eg.com

Almost any standard stepper or servo drive would be compatable with a UMI. The Parker Aries you have a link to is a servo drive, not a stepper drive. You motor ratings are unusual for a stepper motor. What is the brand and model? I have had good luck with Applied Motion stepper products. www.applied-motion.com

Where to add Third Party JDBC Driver in SQL Developer 4.1 EA2

In SQL Developer 4.0.3 under Tools - Preferences - Database there was an option to add a Third Party JDBC Driver so we could use the same tool for a PostgresSQL database. I cannot find in in SQL Developer 4.1.0.18

I think it happened because I imported settings and connections from a previous installation.
I removed the C:\Users\username\appdata\SQL Developer\system4.1.0.18.37\ folder.
I've run it now without that and the option is back.
Thanks!

Istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

Hi
So these are EXS24 Sampler Instruments?
If yes... the .exs Instrument files need to go in
Library:Application Support:Logic:Sampler Instruments
Or
<User>:Library:Application Support:Logic:Sampler Instruments
CCT

Third Party DVD Drive to Install Tiger

Can a third party DVD drive be used to install Tiger? I have an iBook G3 with a CD ROM drive I would like to install Tiger on.

I can't tell you, as my D2 DVD burnt out quicker than a candle burning at both ends, but of these...
http://www.lacie.com/products/range.htm?id=10014
It'd have to be the one with Firewire at least... just don't know what's happened to LaCie in the last couple of years.
I'd ask OWC about these...
http://eshop.macsales.com/item/Other%20World%20Computing/MRBFWU2D115/
http://eshop.macsales.com/item/Other%20World%20Computing/MRFWU2D115/
http://eshop.macsales.com/item/EZ%20Quest/K18560/

How do i access third party instruments

Sorry for this questions seems really basic. Moved from Garageband to Logic and can't find out where the AU third party instruments are. Although not easy to get to in garageband I was successful --now I can't seem to find them in Logic. Thanks in advance-- I have the Sonics 88 piano AU which is listed in the AU directory

All 64bit AU Instrument Plugins (LPX doesn't support 32bit AU Plugins) can be found by making a Software Instrument track, click the large i button in the top left hand corner of Logics main window (To turn on the Inspector...).and then after selecting that track... in the Inspector for that track... using the Instrument Button.....
Tip: In Logic's preferences.. turn on all the advanced features so Logic works in the full Logic mode and not the cut down 'Garageband Pro' mode...
Here are some annotated screenshots to help....
Yellow Box - Inspector on/off button
Red Box - Instrument Button
Blue Box - Where you will find your 3rd party 64bit AU Instrument Plugins....

Using a Third Party JDBC Driver that has dependencies [Version 2.1.1.64]

I am trying to connect to a TRIP database (a product from Tietoenator). They offer a JDBC driver which I have already used in java applications. So I can confirm that it works. What makes that driver perhaps a bit special is that it needs 3 other jars to operate.
So I need these jar files
<li> tripjdbc.jar (this is the actual jdbc driver)
<li> tripjtk.jar
<li> triputil.jar
<li> xercesImpl.jar
I have tried to place all of those jars into the Tools > Preferences > Database > Third Party Drivers dialogue [as suggested here|http://www.oracle.com/technology/products/database/sql_developer/files/thirdparty.htm]. But that does not help.
Following the docs of Tietoenator I need those 3 libraries in the path of the java app the JDBC driver shall be used from. This is where I currently fail. How can I add those to the classpath of the SQL Developer? I assume it is a *.conf file somewhere in the SQL Developer home directory ... ?
Thank you for any suggestion.
EDIT: I am using SQL Developer on a windows box. May be of interest.
Edited by: user7368833 on 17.05.2010 05:05

I'm using java web to create website,the database use trip , have some problem, could you give me some answer, thankyou very much.
the question: how to use java connect trip to add some record by webpage,and other mothod,such as modify\search\delete record,could you give some sample code about these,such as book entity.thankyou very much.
email:[email protected] or [email protected]

Installing third party instrument samples

I just purchased and installed Vienna Instrument's Special Edition. Nothing tells me how to import the samples into Logic Pro's tracks, and Logic Pro isn't any help either - it says refer the VI manual (and adds the helpful comment that if third party samples are properly installed, they will work just fine).
I went through the installer tutorials, including mapping to the folders that hold the VI instruments. I also watched the basic online tutorial on how to use the VI Instruments Standalone (which is no help because I'm trying to import these sounds into Logic, and neither Logic nor the VI manual give you ANY indication how these two pieces of software have any relationship to each other.)
Classic example of manuals being written from the world view of the informed, instead of thinking what somebody without any background in this would need to know (i.e. the people who actually need the manuals). It's like trying to find the interstate entrance in New England - "If you don't know how to get there, you don't belong there."
I'm also experiencing all kinds of crackling and latency, having simply installed the samples, without having plugged any of them in to a Logic Pro track - seems like I'm scraping the bottom of my memory without having done ANYTHING yet. (Macbook Pro 1.86 GHz, 2GB DD2 Ram).

Yes,
I am able to open VI's stand alone software and hear the samples. I have no idea what the "AU Manager" is and nothing in the Logic Pro manuals give any indication of such a thing (continously curious to me how all these manuals are written for those who don't need them). Can you tell me how to find and run this AU Manager that seems critcial to getting started, since Logic Pro and VI apparently don't seem to think it's necessary to mention it (and yet they tell you to read the manuals cover to cover...)?
Yes, the Vienna Instruments component is in it's correct folder.
And yes, I've restarted the computer and all the software a dozen times.
Yes - the syncrosoft license is installed and operating correctly.
If you've got other ideas of why this won't work, let me know. I'm burning up a precious weekend on something that ought to be brain-dead easy to do.
I've also got the MacProvVideo DVD tutorials for Plug-ins and for EXS24 (Martin Sitter's group). What a joke. They explain all about the complex conversion of non-native instruments like AKAI, and completely ignore telling someone how to connect VSL to Logic Pro. Again, assuming it must be too easy (who do they think buys tutorials?).
Very frustrated over what should be a very simple process.
Help??

Third-party hard drive replacement

I want to upgrade the hard drive in my ca. March 2006 MacBook Pro (2.0 GHz) with something bigger than the original 100 GB Seagate that came in it. I have looked online at the various places that offer directions for doing this yourself and, frankly, don't feel comfortable trying this myself. Because I live in a rural area, I am not close to any Apple Authorized Repair Centers, and so I would like to send it off to have the hard drive replaced. I had good luck in the past with iResQ (they fixed a dead Titanium PowerBook that I used before I got this MBP) and I have seen a few other places online.
I would appreciate hearing from anyone with first-hand experience with any of these third-party places doing hard drive replacement. Any and all comments (or suggestions - except telling me that I can do it myself) will be appreciated.
Thanks in advance.

Quite true--I should have phrased that more along the lines that you risk voiding your warranty if a non- Apple authorized person does the repair. I believe that if an Apple authorized repair person inflicts damage while in the computer, Apple will still honor the warranty because the damage was done by someone that they authorized to do the work. If someone unauthorized does the work, there is always the possibility that some future problem may be blamed on the unauthorized work and won't be covered. And if the unauthorized person causes actual damage, you're on your own, for that damage anyway. Applecare should still cover something totally unrelated.
The one thing that does change is that the new drive itself will not be covered by Applecare any more. However, it will be covered by the manufacturer's own warranty, which is usually 3-5 years. Everything else in the machine should still be covered by Applecare.

Spectrasonics & Third Party Instruments

I just upgraded from Pro 6 to Logic 8 , and I can't seem to get it to recognize any of my spectrasonics instruments. After creating a new instrument, no third party software shows up in the list of instruments, only the Apple instruments. I've tried resetting the AU Manager, and that didn't work. I've looked through the forums, and while many people have had issues with the multi out, I haven't been able to find any info on simply loading the instrument.
Can anyone help?
Much Appreciated.

If you're working on an Intel you need to get an Intel wrapper located at:
http://www.spectrasonics.net/news/2007/intel-mac-support-solutions-for-atmospher e-trilogy/

Crazy JNDI Problem... (Third Party DB Driver Effects Lookup???) (OAS 10g)

Ok folks, I need some help here...
The scenario is this...
I have a simple web app (one jsp) which is used as a "status checker" to ensure that all the session beans we expected to be deployed are actually deployed and that they can be looked up with JNDI and run some small status routine... That war file for that app is included in the ear file with all of the session ejb jar deployments...
Now, the collection of session beans references three different datasources at one time or another... 2 of which are oracle databases and 1 is a DB2 database...
Lets name them as follows...
OracleDataSource1
OracleDataSource2
DB2DataSource
Now, if I configure the three datasources in the oracle standalone OC4J 10g datasource file and deploy the ear file to standalone OC4J 10g, all of the lookups work, and it successfully uses the datasources... no problems at all...
Ok, so now I try to deploy the ear on OAS 10g using the enterprise manager console, and deployment works fine...
If I run the app before configuring the datasources, of course the lookups work, but the status routines of certains beans fail because they are not able to look up the datasources... no big deal, just start adding the datasources...
I configure OracleDataSource1 and rerun... now things still work, the lookups for all the beans works fine, and some pass now, but others still want the other datasources...
Now configure OracleDataSource2 and rerun... as before, things all work great but there are still complaints looking for the DB2DataSource from a couple of the routines...
Herein lies the problem...
I configure DB2DataSource and rerun, and boom, my program crashes claiming that the lookup of the bean failed...
Now mind you, these beans have all been looked up numerous times during previous runs, and absolutely nothing has been changed with the application... in fact, even the beans that wanted the DB2DataSource were looked up successfully and then just complained of no datasource during their status routine execution...
It's just that once I configure the DB2DataSource, all of a sudden my lookups don't work... I have tried commenting out a couple of the beans, and regardless of which lookups are commented out, it still fails saying it can't find any of the beans, even if the beans i'm trying to look up don't use the DB2DataSource, it doesn't seem to matter...
The InitialContext used for the lookup uses the default "new InitialContext()" constructor and the lookups work fine when the DB2DataSource is not configured, but once it is, the lookups fail saying the objects are not found...
I have consulted with a few other developers here, and noone can seem to understand why this behavior is happening... I have added debugging statements to print the contents of the context's environment, and it is always empty regardless of whether the lookups pass or fail...
The ONLY difference I can see with this DB2DataSource is that it uses an external 3rd party driver... The oracle connections use a driver which was packaged with the OAS installation... I feel pretty strongly that it has to do with the driver because if I have the DB2DataSource configured (causing the failure) and then I edit that datasource to say that it should us the oracle driver, miraculously it causes the lookups to work again, except now I get the error saying the oracle driver doesn't like my DB2 jdbc url...
I'm sorry for the long post, but I'm hoping that at least one person has encountered this before... I cannot think of any reason why the configuration of that datasource with the third party driver would cause these problems, especially when the exact same configuration and setup DOES work with standalone OC4J 10g, even with the DB2DataSource configured... ????? And the fact that the lookups work fine until that datasource is configured really blows my mind... i wouldn't think the datasource configuration should have anything to do with whether the lookups of the session beans succeed or not... hahaha...
Any help would be great... I'm pullin my hair out here... :)
Thanks,
-Garrett

No, I have not asked on the oracle forums yet... :)
It seems that the cause is the driver itself... if I set a different driver for the datasource configuation, the lookups work but it just complains about the driver not being correct for the individual beans...
I have found some documentation claiming that there is an OAS version of the DB2 driver, as well as a Merant version, but I can't seem to find jar files for either...
Does anyone know where I can download the "YMdb2.jar" file? Supposedly this contains the DB2 DataDirect driver that I need...
Thanks,
-Garrett

Third party JDBC Driver and Domain Extension

Hi everyone, I'm using a third party driver to acess some of the legacy databases in my company. I'm adding them to Weblogic's (v. 10.3.3.0) Classpath by setting the EXT_PRE_CLASSPATH in the setWLEnv.sh file. Everything worked fine so far, until I had to extend my domain to acomodate new settings. The Configuration Wizard crashes in the middle by saying "A fatal error Has Occurred. This Application will terminate". By inspecting the logs I saw that the Wizard tried to search my Data Source which used the third party driver and couldn't find the Driver Class. I would like to know if there is a better way to add the library to the Weblogic's Classpath or someway to workaround this issue during the extension. In my current situation I'm having to erase the data source, extend the domain and reconfigure the data source, which is big trouble !
Any help will be appretiated ! Thanks
PS: I've also tried to add the third party driver's JAR in the CLASSPATH inside config.sh file but unfortunately the error was the same !

You can place your jar files in the domain lib directory.
WebLogic uses a separate classloader to load classes from the domain lib directory. This classloader
is a child of the system classloader, and a parent of the application classloaders. The classes and
resources in any .jar file placed in the directory is automatically available to all applications.
Note, however, that the domain lib classloader does not support redeployment, dynamic reloading, or FastSwap, and cannot
refer directly to code in the application classloaders. But i think that this is not a problem, you just want your
thrid party JDBC driver to be availlable for your applications.

Adding third-party SSD drives to Xserve

Has anyone tried this? I would like to buy a new Xserve and migrate to 10.6, but since my application would benefit greatly from SSDs, I would like to buy build an Xserve with a SSD boot drive, and two SSD drives in RAID1. Since Apple doesn't offer SSDs as a drive bay option, has anyone here successfully done it on their own?
...Rene

Yes, I can't see a reason either why a third-party drive (e.g., http://www.plianttechnology.com/lightning_ls.php ) be used. I would just like to hear from someone who has actually done it on a the newer Nehalem Xserves. My application is very database bound (many small, random reads and writes), and I think it would benefit greatly from an SSD.
...Rene

Data Acquistion Using Third Party Instruments

Hello,
I am planning to create a data acquistion system using Labview+Third Party Data Acquistion Card(from Multi-Instruments Inc). I got the attached documentation from hardware producer which expain how to create VC++ application using provied DLLs.
It should also possible to create application on Labview by using the provided DLLs. But I failed to make the first step dut to limited programming experience.
Can anyone provide any examples on this field?
Or can anyone help to create a simple application(which could show the acqured signal) using attached DLL+Computer Sound Card+Labview? So that I could follow your example as reference. The attached DLL support Computer Sound Card.
Thank you very much.
Fan Tingdong
Attachments:
vtDAQ_and_vtDAO_Interfaces.pdf ‏187 KB
DLL.zip ‏67 KB

The only open question is what did they mean writing:
"Can use the PSI, but not supported: no OAuth and no service-to-service connections"
That's written about Project online
Does anyone know the answer?
Thank you

Upconvert Third Party Instrument Driver

Similar Messages

Maybe you are looking for