Upconvertion from labview 5.1 to 2012 - (A)
Could anyone please upconvert this softwares from Labview 5.1 to a version which can be opened on Labview 2012?
I would be really grateful.
I'll have to post another codes on extra messages, as I can't attach all of them at once due to the forum limitation of 6 Mb for the attachments.
I wish you understand, sorry for that.
Thanks in advance!
Attachments:
ProgramsA.zip 4049 KB
Mass compiled in 8.2.1, which you can open with 2012.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
ProgramsA.zip 3251 KB
Similar Messages
-
Upconvertion from labview 5.1 to 2012 - (B)
Could anyone please upconvert this softwares from Labview 5.1 to a version which can be opened on Labview 2012?
I would be really grateful.
I've post another codes on other messages, as I can't attach all of them at once due to the forum limitation of 6 Mb for the attachments. Not that this is the part (B), with different content from part (A).
Once again sorry for that, that's the only way I've found so far.
Thanks in advance!
Attachments:
ProgramsB.zip 3307 KBMass compiled in 8.2.1, which you can open with 2012.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
ProgramsB.zip 2756 KB -
Upconvertion from labview 5.1 to 2012 (Composed RAR File)
Could anyone please upconvert this softwares from Labview 5.1 to a version which can be opened on Labview 2012?
Here I had to create a composed ZIP file with 3 parts to be able to upload within the upload size limit. The forum doesn't accept RAR at all.
Here attached the main part called "_Incoming Inspection.zip".
The other parts follows in the messages: "_Incoming Inspection01.z" and "_Incoming Inspection02.z". But they have to be renamed, as the forum also does not accept the extensions for composed ZIP files (i.e. .z01 .z02 .z03 etc.), I've renamed them. So please rewrite their names as:
From "_Incoming Inspection01.z" to "_Incoming Inspection.z01"
From "_Incoming Inspection02.z" to "_Incoming Inspection.z02"
I've used WinRAR to compose the ZIP files.
Sorry for this BIG incovenience, but that's the way I figured out how to solve it, and have the files converted for working with them.
You guys in the forum are doing a pretty good work, congrats!
Really many thanks to you!
Rodolfo Machado.
Solved!
Go to Solution.
Attachments:
_Incoming Inspection.zip 4897 KBI've rearrenged the content to 4 parts with normal zip format (WinRAR can unpack all of them).
I think now it should work, you can mass compile each of them separately.
So hereunder the files come, two of them in this message and other two in the next ones.
Thanks in advance crossrulz!
PS: about downloading the version 8.2.1 as you suggested, I didn't get the proper link using the search feature of NI website.
Attachments:
WEP_LABCE.zip 2557 KB
_GR & TKE sys adapter manager.zip 215 KB -
Upconvert from LV 5.1 to 2012
Hi,
Could someone upconvert this VI from LV 5.1 to 2012 please?
Thankyou
Rhys
Solved!
Go to Solution.
Attachments:
EXAMPLE1.VI 156 KBI was missing a DLL, but here are the files saved in 8.2.1, which 2012 can read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
EXAMPLE1.VI 43 KB
DEVA001.LLB 67 KB -
Upconvert from Labview 5.1 to Labview 2010
Please convert these VIs (in zip) from labview 5.1 to Labview 2010
Solved!
Go to Solution.
Attachments:
c3d_reader_labview_b.zip 864 KBAttached as 8.2, which you can open.
Note: The VIs in the "Files IO" folder have been deprecated. You should replace them with the single Read from Binary File function.
Attachments:
C3D Reader.zip 706 KB -
Upconvert from labview 5.1 to 2011
Hi,
Can I Have the attached converted to Labview 2011 please?
Thanks
Solved!
Go to Solution.
Attachments:
axevents.zip 31 KB
axevents.zip 31 KBAttached, but you should read the warning from the mass-compile:
#### Starting Mass Compile: Wed, May 02, 2012 8:00:04 AM
Directory: "C:\LV Forums\_Upconvert\axevents"
Search failed to find "Convert OLE Color.vi" previously from "<vilib>:\3dgraph.llb\Convert OLE Color.vi"
### Bad VI: "AXEventsExample.vi" Path="C:\LV Forums\_Upconvert\axevents\AXEventsExample.vi"
C:\LV Forums\_Upconvert\axevents\AXEventsExample.vi
- The Create ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
- The Wait On ActiveX Event From Multiple.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
- The Create ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
- The Destroy ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
- The Destroy ActiveX Event Queue.vi subVI will not be included in future versions of LabVIEW. Refer to the LabVIEW Help for information about using the ActiveX events callback functionality.
#### Finished Mass Compile: Wed, May 02, 2012 8:00:13 AM
Attachments:
AXEventsExample.vi 12 KB -
Upconvert from LabVIEW 4.02 to LabVIEW 2011
Wiii, my university library finally managed to find the missing disk from the book "LabVIEW power programming". Now I just wanted to check it out but all the VI's are to old.
Can someone of NI upconvert them? I uploaded the .zip (with password) containing the VI's on my server because it was to large as attachment.
Please send me a message for the download link.
Cheers
Solved!
Go to Solution.Someone?
-
UpConversion from Labview 5.1 to 2012
I would like to have this VI's converted to the closest possible version, to be used in Labview 2012.
I've read that the version 8.2.1 is ideal to make this step conversion, could someone convert it to me, please?
Thanks a lot for your help!
Rodolfo
Solved!
Go to Solution.
Attachments:
ConvertTo8.zip 5485 KBMass compiled in 8.2.1
I also included the mass compile report inside of the zip file, just in case you wanted to take a look.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Converted to 8.zip 5094 KB -
Upconvert from Labview 5.1.1 to Labview 8.5
Can someone please convert this VI to be compatible with Labview 8.5?
Thanks I appreciate the help.
Solved!
Go to Solution.
Attachments:
BTD1.vi 244 KBThere were a bunch of subVIs missing, but here is the VI saved in 8.2.1.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
BTD1.vi 55 KB -
Upconvert from LabVIEW 5.1 to 2010
Hi! Can someone kindly help me on upconverting the attached files into 2010 version?
Thanks in advance!
Attachments:
regimen automático.vi 82 KBHi,
You read it now but Trad. DAQ VI's are missing.
Kees
Attachments:
regimen automático.vi 66 KB -
What files do I send to be upgraded from LabVIEW 5.1.1 to LabVIEW 2012?
OK. Just to be clear. I am a complete newb to ANYTHING LabVIEW or LabWindows related. I am a programmer, but I have never used any version ever. That said, I am responsible for the upgrade process of getting our old LabVIEW 5.1.1 system up to date. The old system (still running and doing it's job everyday), is an old Windows NT v4.0 SP6 system running LabVIEW 5.1.1. You can just imagine how ancient this is by today's standard.
Have I set the stage properly? I hope so. Newb, Ancient LabVIEW version 5.1.1, Windows NT 4.0, upgrading from 5.1.1 to 2012.
Now here is what I "think" I know about what is required. Because LabVIEW 2012 will not directly read in, process and /or compile LabVIEW 5.1.1 files, I must first open and save the files using an intermediate version of LabVIEW (specifically 8.2.1) to bring the files up to a version that 2012 can handle. I have noticed in reading the Version Conversion forum, that I can attach a zip file of my LabVIEW files and one of the resident Gurus will convert it for me and give them back - quite nice I think.
Now, I have what I think are all of the required LabVIEW vi and llb files that make up this system we have in place, but I want to be sure before I just post a bunch of stuff.
What exactly do I need to zip up and what can I leave out?
Are there LabVIEW vi and llb files in a "project" that are not needed?
Are there any setup/configuration/project specific files I need to include?
Are there any limitatations to this conversion process that I need to be concerned with - such as various toolkits/suites/modules that may have been used but are no longer supported?
Secondly, I am not really comfortable with posting my vi and llb files for the world to see (and possibly use) as I am not the owner of said modules, just the user/future developer who will be responsible for insuring they stay up to date. Is there any way I can send my files to a specific NI guru via email instead of just posting them?
Solved!
Go to Solution.So if I understand you correctly, all I really need to do is to get LabVIEW 8.2.1, and update my .vi, .lib, and any .ctl files to that version.
Is it a simple matter of just opening the files and hitting something like SAVE AS, or just SAVE and it will do this? Once done, LabVIEW 2012 will then allow me to open them and do what I need to do? Do I have to save them into LabVIEW 2012 first, or is that automatic when I try to recompile them?
When I get a copy of LabVIEW 8.2.1 (eval version), do I have to get all of the pieces (modules, toolkits, etc.) in order to update the 5.1.1 files? Based on what is installed on that NT v4.0 system, we have the following items installed:
NI VISA
NI ComponentWorks 3D Graph
NI DataSocket
NI LabVIEW 5.1.1 Advanced Analysis Library
NI LabVIEW RTE 5.1.1
NI LabVIEW v5.1.1
NI Measurement and Auto Explorer 1.1
NI-488 2.1.60
NI-DAQ 6.6
NI-PAL 1.3.110
NI-Reports
NI-VXI/VISA
You mention DAQ. Our program uses NI DAQ v6.6 now. I have LabVIEW Developer 2012, so I just download the DAQ files for it and it will replace the NI DAQ v6.6 library files we use now?
Thanks for your help so far. If we had a support contract in place, this wouldn't be an issue. However, as I stated, I am not the owner of the files, just the currently assigned caretaker, and part of my task is to get from where we are now on this ancient hardware/software platform, to the latest and greatest. However, I am specifically not allowed to just place the files on a public forum for all to see. It just isn't done. We can send them to a known location and a known entity, but not to just anyone/anywhere as a public forum is by its very nature.
I know there is nothing you guys can do if I cannot give you the files, but thanks for helping me to do it myself. Getting an eval copy of 8.2.1, et. al is probably what I have to do here. -
Convert TCPIP_Nagle_algorithm.zip from LabVIEW 2012 to LabVIEW 2011
Hello,
can somebody convert the VIs in the zip file from LabVIEW 2012 to LabVIEW 2011 please. I need them to study.
Thank you very much for your support.
Solved!
Go to Solution.
Attachments:
TCPIP_Nagle_algorithm.zip 63 KBAdditionally I am sorry that I have put my post in LabVIEW and not under Version Conversion
-
Conversion from LabVIEW 2012 to 8.2
Dear All
Can any body help me to convert the attached file from LabVIEW 2012 to LabVIEW 8.2. Please send the file in doc or pdf as well.
Kind Regards
Muhammad Irfan
Solved!
Go to Solution.
Attachments:
PVT - Mathscript Node.vi 83 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
PVT - Mathscript Node.vi 90 KB -
Please Convert tktds5xx from LabView 2012 to LabView 2011.
I was directed here to have an instrument driver converted from LabView 2012 to LabView 2011.
Thanks in advance!
Solved!
Go to Solution.
Attachments:
tktds5xx.zip 777 KBHere you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
tktds5xx.zip 529 KB -
Conversion from LabVIEW 2014 to LabVIEW 2012
Couls someone convert me this file from LB 2014 to the 2012 version, please?
Solved!
Go to Solution.
Attachments:
Ejercicio Optativo.vi 38 KBSaved for 2012.
Adam
CLD & CTD
Attachments:
Ejercicio Optativo.vi 27 KB
Maybe you are looking for
-
My cell phone number is not available for iMessage on the iPad
My cell phone number is not available for iMessage on the iPad, it used to be available but now it is not and it won't let me add my phone number. My iMessage is working on my iPhone but not my iPad.
-
hi...! plz tell me how to upgrade oracle database 9.2.0 to 10.2.0 in oracle applications 11.5.10.2 I am following the metalink doc-id:359483.1. I did ths steps mentioned in the note. under DATABASE INSTALLATION step 3 I am getting following error....
-
Is it possible to install a touchscreen on T520?
I was wondering if it is possible to install a screen replacement for my T520 which provides touchscreen functionality. If possible at all, What else would have to be exchanged at the same time? Currently have an FHD screen with the Optimus setup (In
-
hai
-
Hi, I'm making a storyboard in PS and have been creating seperate psds for every shot but now the new document generates a much longer image then I set in the parameters. It has done this before and I would just generate a new one and after a few tri