Update 0funct_loc from 2 data source

Dear all,
i am filling 0funct_loc from 2 data source, one is 0funct_loc_attr, and the other is 1cl** from characteristics data source.
My problem is both data sources work fine, however after uploading 0funct_loc, and try to upload run1cl**, it finds records but does not update specific fields of 0funct_loc as that funct_loc exists.
My data flow is 2 data sources(0funct_loc_attr, and the other is 1cl** ) in the bottom, one info source joining that and update rule to 0funct_loc.
Any help?
Thanks..

Hi John,
What are you trying to do here? In case each datasource will deliver different data (characteristics) of the function location, I would suggest to create two infosources (one for each datasource) and update the available characteristics.
In the monitor of the function location, you will still see that no records have been added, but still the attributes that are solely delivered by one datasource should be updated in that case.
hope this helps.
best regards,
Arno

Similar Messages

  • Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

    Hi Gurs,
    I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
    The error is:
    Update mode "Full Upload" is not supported by the extraction API
    Message no. R3011
    Diagnosis
    The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
    System Response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or send a problem message of your own.
    Your help in this regd. would be highly appreciated.
    Thanks,
    David.

    Hi David,
    I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
    Try to switch you DTPs/Infopackages to Delta mode.
    While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
    BR
    m./

  • Error while loading data into PSA from data source

    Hi Experts ,
    I am loading purchase order history data from standerd datasource 0SRM_TD_CF into PSA using infopackage.However,whenevr I run infopackage,the call monitor shows the status as yellow.I monitored the process for half an hour but it never ended.I have verified following things from my side.
    1.Checked whether datasource is properly replicated into BI system.
    2.Checked if source system contains data.
    3.Since i am loading transaction data,I have kept update as "initialize delta process"
    Please let me know whether I am missing anything.
    Regards,
    Mandar.

    Hi mandarha,
    Do the following steps
    1)Check the job log in source systems.
    2)Check the Data Source in RSA3(Extracter checker) on Source systems side.give DS name press enter then execute,If there is no issue with DS,it will give pop-up with records.If it has any errors first rectify it and then load it again.
    3)In details tab of IP,check whether extraction completed or not.
    4)Are you running the IP with option "Intialse with data trasfer" or "Without data transfer"
    If you running with data transfer and without data selection,usually it will take time based on the volume of historical data.(to find how many records it picks do the 2 step)
    Hope this helps
    Regards,
    Venkatesh.

  • Marker update for Inventory data sources

    Hi all,
    why we use marker update in Cube manage for inventory data sources at the time of loading?
    i heard that to avoid the keyfigures cumulation we do check that option ,is that correct/
    please clear my doubt
    thx

    HI
    (2LIS_03_BF Goods Movement From Inventory Management-------Unckeck the no marker update tab)
    (2LIS_03_BX Stock Initialization for Inventory Management--
    ---select the no marker update check box)
    2LIS_03_UM Revaluations -
    Unckeck the no marker update tab)
    in the infopackege of "collaps"
    Cheers

  • Create a new dimension in business layer from Data source: text file on the web

    Hi,
    I have a text data source which is published every few hours that is accessible from a certain URL. I follow the instruction given in this http://scn.sap.com/docs/DOC-43144 - where it shows in great detail how to create the connection, data foundation as well as business layer to create a universe for this type of data.
    All is well - I can use this universe in my WEBI doc and display the data.
    However, in order for me to merge the data from this universe with another universe, I need to create  new dimension based on the data from the text file. The new dimension value is simply the first 4 characters of the Subject found in the text file. The "Subject" dimension is of variant type: varchar.
    Following the guide mentioned earlier, the connection is using SAP BO OpenConnectivity driver. And this driver limits severely the SQL statement that I can use to extract a substring of another string. Here's the screenshot of the SQl expression that I can use with this driver
    After hours of searching, I cannot find any other connection driver for a text file that's published on a certain URL. The BO OpenConnection driver is the best that I could find.
    So here are my problems
    1. one of my data source is a text file published on a web
    2. the only connection I can create does not allow me to create  new dimension in the universe to create an important column "subject ID"
    3. I can create the column in webi as a variable. But when I do so, I cannot merge it with existing dimension (webi not allowing to merge these 2 types). And without the merge, the flat file universe with my database universe can't be combined.
    I'm using WEBI Rich client version 4.1 SP3 Patch 1. Build 14.1.3.1300
    Is there any other idea that you can suggest without requiring to change the extracted data?
    Thanks.
    With warm regards

    Hi Bala,
    Were you able to find out a solution for the problem with uploading values for a variable from a text file on the web?  I am confronted with the same request from users.
    Thanks,
    BQ

  • Error when extracting data from Data Source

    Hi All,
    I have a Generic datasource in BW which is based on a Function Module.When I am extracting the data from this source in RSA3 it is ending up in Run time error.
    the error message is
    The current ABAP program "SAPLYBWPU" had to be terminated because one of the
    statements could not be executed.
    and the error analysis is
    You wanted to add an entry to table "\FUNCTION-POOL=YBWPU\DATA=GT_HIERTAB2", which you declared with a UNIQUE KEY. However, there was already an entry with the same key.
    This may have been in an INSERT or MOVE statement, or within a
    SELECT ... INTO statement.
    In particular, you cannot insert more than one initial line into a
    table with a unique key using the INSERT INITIAL LINE... statement.
    Can anybody explain me how can I resolve this
    Thanks
    Sreeja

    Hello
    You can refer following link.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33&overridelayout=true

  • ConnectionCacheName not read from data-sources.xml

    I created a simple web application to test the use of the ConnectionCacheBean (from the jdbc 3.0 examples page). I read through the code and some other articles regarding data sources and noted that you "should" be able to set the connection cache name and caching enabled, as well as failover support, even in oc4j 9.0.4 and 10.1.2. I tried this (at least the first two), and it would NOT set the cache name.
    The data-sources.xml entry was the same as in the one documented here:
    http://www.oracle.com/technology/tech/java/newsletter/articles/oc4j_data_sources/oc4j_ds.htm
    What gives?
    Also, I tried to simulate the database going down - I killed all the sessions rather than doing a shutdown, but anyway... even with a connection cache property of validatelogin (i think that's the name) to true, and a refresh of invalid connections (they'd all be invalid if I killed them), it would only reactivate ONE SESSION. If I refreshed ALL Sessions, then it would do 9 of the 10 sessions (10 being my initial cache limit).
    Any ideas?
    I can post the code if that is an issue.

    A response I got back from Frances Zhao regarding the two issues that I experienced was:
    Issue#1: Cannot set the connectionCacheName via data-sources.xml
    1. This is very likely because of an OC4J bug that affects the actual order of
        setting each <property> specified in data-sources.xml.  The connection cache
        in OracleDataSource requires the cache-name property be set after the cache
        is enabled; but OC4J may not always follow this order, causing the name
        to be null.  If you really need the cache name, you have to do it in the code
        for now.
    Issue#2: Can't refresh the invalid connections
    2. These are known issues in the Oracle JDBC driver in both 10.1.0.4 and
        10.2.0.1.  The fix for the REFRESH_INVALID case will be in the next
        patch release for both 10.1.x and 10.2.x; the fix for the REFRESH_ALL
        case will come later.

  • Star Ratings -- From data source

    Hi,
    I have imported a data source to my page and it includes a number which I'd like to convert to stars (graphics). Is there a simple script that I can use to take the number being imported and convert it to a graphic? If the rating is a 2 I'd like to have two stars, etc ...
    Thanks!

    You could probably go 3 ways. Run a script after the merge, this would be the best.
    For each page, get the number/integer of the star rating from the text box. Then have the script draw X number of image frames on the page where ever the rating needs to be, like 3 or 4 small square boxes. You'd have to manually determine the placement of box 1, box 2 etc. Then place a star graphic in each box.
    Or you could also have the stars drawn as a polygon shape directly in InDesign, drawn as many times as needed.
    Or draw just one box, long rectangle, and then have 5 images of star ratings, 1 star, 2 star etc. Based on the number, place the file name that begins with that number (ie "1-star.jpg").

  • Restrict Values in Design Studio in chart from data source

    Hi All, I have BW Query and I have created a data source that brings lets say 15 values. I only would like to show top 10 values from it. I do not want to restrict in BW query ,, can i still achieve this. The attached screenshot has like 15 values for example,, i only would like chart to populate top 5. How can i do this.. Thanks for your help

    Hello Faisal,
    Is there a reason why you wouldn't want to do this in the BEx query?  Because conditions/exceptions from BEx query are supported SAP BusinessObjects BI4 - Supported BEx Query Elements
    It seems to me that would be the easiest to meet your requirement.

  • Fields missing from Data Source but displayed in RSA3

    Hello Experts
    I have an issue while finding for a field in the data source. As I am looking for some fields : MABST, MINBE, EISBE on BW Side but not found. When I llok the same fields in ECC Side in the table RSOSFieldmap, then I get these fields in 0MAT_PLANT_ATTR Data Source. In the same time , the fields are not available in the Data source on BW Side as well as on ECC Side(while goin thru RSA6). Also when I execute the RSA3 for the data source, I am getting the data in the Missing Fields. How it can be possible? Also plz let me know how can I make these fields available in Data Source.
    I replicate the data source, also i looked for the hidden fields, but still not succeed.
    Thanks in advance
    Neha

    Hello,
    TO unhide the field,
    Just Goto T.code RSO2 > press change button.> unhide the filds and --> Generate the Datasource
    or
    Goto RSA6 --> select the Datasource and --> press change button (pencil icon) --> unhide the filed --> Save and Generate the Datasource.
    Try the above two option and check if it is working.
    also go thru the below post
    BI : Hidden field Datasource
    Hope this helps,
    Sri...

  • How to load data from data source to ODS

    Hi all,
    I am using BI 7.0.My requirement is to upload sales order item data in to the DSO(ods).Do I need to create info objects in ODS or by defalut r/3 fileds will come and fill the info objects when i assign my custom ODS.if i need to mailtain info objects in ODS plesae let me know what type of objects i need to maintian in keyfields,data fields and navigation attributs of ODS.
    Thanks
    Raj

    hi raj,
    u will have create infoobjects in BI corresponding to objects in source system.
    create a data source for the source system.
    go to proposal tab u will find fields listed in column.
    u can also watch a perview also.
    give ok
    & next tab is fields tab where u can map the source and target objects .
    u have a template option where u can assign a BI infoobject.
    once assigned the source fields name gets converted into BI name & all properties of BI objects overwrites the source fields.
    now for ODS.
    u have key field & data field.
    key fields usually has characteristics objects
    data field may have characteristics & keyfigure as its component
    navigation atributes u can deploy any attribute object here. providede this attribute has to be specified as navigation attributes in corresponding characteristics object.

  • Updating JTable from data from resultset

    I have an athletics database, where the user updates an event and round e.g. 100M run Round 1. I then have a query which returns the 3 fastest times from each round for whatever event.
    Now on my JTable gui, the user chooses what event and round to update through 2 JCombo boxes, one for events, one for rounds. Now if the user chooses the round name final, i need the JTable to update the table with the three fastest times from rounds 1, 2 and 3.
    Whats the best way to do this? I was thinking putting all the different result sets into an array, and then through an if loop have somthing like
    if(roundType.equals (final))then in the body of this loop, create an instance of my JTable setting the rows for each column the the resultset data.
    Is this the right approach or any other advise?
    cheers

    You probably defined the "table" variable twice. Once as a class variable and once as a local variable and your "insertValue" method is referring to the wrong variable and therefore updating the wrong table.

  • Updating Magazine from database source

    Hi,
    Some information that I need to manage in mu future magazine has to be updated from a database hosted on a server.
    Is there a way to do that ? I believe it is done with the webkit window ?
    What happens when my magazine id in offline mode (aka the iPad is diconnected from network ?)
    Regards,
    Frédéric

    Thanks for replying ceccs,
    I did try this by creating a backup vector of the database table. But everytime I changed the data in the Jtable this changed the backup one.
    I haven't got a clue as to why this is happening

  • Update Routine to populate 0VENDOR from either of the 2 data source fields

    Hi,
    I have a requirement to write an update routine for 0VENDOR based on the below logic :
    Create routines to populated BW Info Object u201CVendoru201D (0VENDOR) based on the following logic:
    IF field u201CVendoru201D (ITM_VENDOR_ID) is populated from data source 0BBP_SC_TD_1, THEN populate 0VENDOR with that value
    ELSE IF u201CPreferred Vendoru201D (ITM_PROPVEN_ID) is populated from data source 0BBP_SC_TD_1, THEN populate 0VENDOR with that value
    ELSE IF neither u201CVendoru201D (ITM_VENDOR_ID) or u201CPreferred Vendoru201D (ITM_PROPVEN_ID) are populated from data source 0BBP_SC_TD_1, then 0VENDOR = NULL
    Can anyone help me in converting this logic into ABAP routine.
    Thanks,
    Suchitra

    Hi Suchitra,
    In the Transfer Rules ... You will be mapping each field then the mapping field click on the button with Triangle then you can see the which type you want.
    Then select the routine and select the datasource fields (don't forget to select the both fields VENDOR and PROPITM)...
    Then give a name to routine ...
    and in the code just change the COMM_STRUCTURE to TRANSFER_STRUCTURE.
    Then you can get this .... done..
    Regards,
    Ravi Kanth

  • Error updating data source from SQL Server ODBC into SQL Native Client 10.0

    I am converting Crystal 8.5 reports into Crystal XI release 2. The data source was ODBC using SQL Server 2000 and pointing to a stored procedure. In the new server the data source has to be ODBC again, but it uses the SQL Native Client 10.0 Driver, because the new server is SQL Server 2008. I have copied the same old stored procedure on the new server and it works fine as a data source to a brand new Crystal XI report. But when I am opening an existing 8.5 version crystal report and updating the data source to the new location I get the error message "Some tables could not be replaced, as no match was found in the new data source".
    I thought I could tackle this error by creating a temporary data source using the standard ODBC SQL Driver linked to the SQL 2008 Server instead of the SQL Native Client 10 ODBC. So I first updated the crystal data source to link to this temp ODBC using SQL Driver and it worked fine. But after that, when I try to update the data source to link to the SQL Native Client 10 ODBC, I get the same error again.
    So I guess that the problem is not the new server itself, but the switch between SQL Server ODBC and SQL Native Client 10 ODBC.
    Does anyone know what's going on with this SQL Native Client 10 in updating crystal report data sources?

    CR XI does not support that driver. Try selecting the Native driver or upgrade to CR XI R2 for free and use SP4, 5 and 6 and then FP 6.4 or upgrade to CR 2008 and SP 3 and Fix Pack 3.3
    Thank you
    Don

Maybe you are looking for