Update 10.3.4.0 - 0% installed

I am trying to install ZCM 10.3.4.0 to our Primary (only) ZCM server. I downloaded and ran the update. The server has been rebooted and it shows the correct update modules on the main configuration screen but if I look at the System Updates tab, it lists the update as Ready and Deploy System updates area lists the server as pending.
I have checked the system-update log and it says all updates were installed successfully.
Any ideas how to get the update status out of pending? I have done a device refresh for the ZCM server.
Steve D.

Disregard this post.
I used the linux commands to restart all ZCM services and the status changed to rebuilding packages and now it is all set.

Similar Messages

Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.

Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.

We don't know what Apple plans on doing to change this (and it may not be just Apple but more likely the publishers, since Apple would, of course, do whatever it could to maximize sales/profits). Right now you can only read Apple books on mobile devices. Sure, buy them from Amazon if you want to read them on the computer. We don't work for Apple so we're pretty impartial on this kind of advice.
You might also see what your library can offer. My wife can browse the county library from her iPhone, borrow e-versions, and read books on it too. Free!

I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1 ?

I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1 ?

See Here... Unable to Update or Restore...
http://support.apple.com/kb/HT1808

I get notice of Acrobat updates but when it tries to install, it rolls back and say "Installation Failed" Error

The error # I'm getting is 1603. Anyone experience this. I have a windows 7 system.

Shut down Microsoft Office and all web browsers. Then, in Acrobat or Reader, choose Help > Check for Updates.
See also Error 1603 | Install | CS3, CS4 products

I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight.

I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product.

Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
* tax not included.

Cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

I wish I fully understood your post, but perhaps you should try re-downloading. Are you trying to download the 10.7.3 update? If so, then try downloading OS X Lion Update 10.7.3 (Client Combo).

System Update 5.0.2 fails to install on Windows 8.1 Preview

I am trying to install System Update 5.0.2 on a W520 running a fresh install on Windows 8.1 Preview. Solution Center is already installed. No other software has been installed on this box, other than standard windows updates.
When I try to install SU5.0.2, I can get to the EULA screen, click on the "I accept ..." toggle, Next button enables, but does nothing when I click it.
Any suggestions on how to SU5.0.2 to complete?
Thanks.
Tom
Here are the last lines in the tvsuSetup.log file after I try to press next, but before I cancel the install.
Action ended 10:23:37: CostFinalize. Return value 1.
MSI (c) (9C:3C) [10:23:37:709]: Doing action: MigrateFeatureStates
Action 10:23:37: MigrateFeatureStates. Migrating feature states from related applications
Action start 10:23:37: MigrateFeatureStates.
Action ended 10:23:37: MigrateFeatureStates. Return value 0.
MSI (c) (9C:3C) [10:23:37:709]: Skipping action: PatchWelcome (condition is false)
MSI (c) (9C:3C) [10:23:37:709]: Doing action: InstallWelcome
Action 10:23:37: InstallWelcome.
Action start 10:23:37: InstallWelcome.
MSI (c) (9C:3C) [10:23:37:709]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'InstallWelcome'
Solved!
Go to Solution.

So first of all you solution.
open Command Controll (CMD) (i would recommend in administator mode)
navigate to the folder where you saved your "systemupdate.exe"
type systemupdate502-06-26-2013.exe /s /a /v"/qn"
(this will install System Update silent. For more inforamtion about that you should visit the microsoft support)
Now wait a bit (depends on how fast your maschine is)
Now open Metro, press this new little "down arow" and there you must find your installed systemupdate
So and now a few words more:
I had this same Problem on a Leaked Final Windows 8.1 version. This means when in October Win8.1 will offical realease, Systemupdate will not work. I think lenovo should go back to his roots and provide the best support they could instead of blocking all work to Windwos 8.1 Threads. I know many people that buy your Laptops only because of the good support.

Update 3.1.2 will not install on imac

I installed aperture from a disc originally not app store. It's not available via software updates and when I attempt to install the manually downloaded version, it gives me an error saying that I need to have aperture 3.0.2 at a minimum to install the update. I have always updated aperture immediately so obviously thats not the issue. It's almost as if the OS does not think I have it installed. Any help would be much appreciated.

Kirby Krieger wrote:
The first thing to confirm is that you have not renamed the program and that it is installed in your "Applications" folder. You must have "~/Applications/Aperture" in order to install an update.
Kirby,
Did you mean to put the tilde in the path? That would indicate the users Application folder, not the system one. For updates and such to work I believe Aperture needs to be in the system application folder, no?

Error 1923: Adobe Acrobat Update Service (AdobeARMService) could not be installed

When I try to update my copy of Adobe Reader, I get
Error 1923: Adobe Acrobat Update Service (AdobeARMService) could not be installed.
Verify that you have sufficient privileges to install system services.
This occurs even when I run the install program with "Run as Administrator".
And it occurs for release 11 and the older release 10.
How do I get around this problem?

Hi,
Please check the following thread for solution: http://forums.adobe.com/message/4789492
Thanks

The update "Mac OS X update combined (powerpc)" can't be installed?

I recently upgraded from OS X 10.3.9 to Tiger (10.4.6) and encountered a weird problem. My system is a Dual 1GHz G4 (mirror drive door) with 768 MB RAM.
When I try to launch iTunes, I get an error telling me that "iTunes requires Mac OS X 10.4.7 or later..."
That never happened before, so I assume that the Tiger installation (or a Software Update I was unaware of) sabotaged iTunes by imposing this new requirement.
Now here's the irony: I can't install OS X 10.4.7! When I run Software Update, it tries to install Mac OS X Update Combined (PowerPC) 10.4.10-- but it fails every time with the message:
The update "Mac OS X update combined (powerpc)" can't be installed.
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by "Apple."
So this seems to be a transmission error, or something wrong with Apple's server. I've tried this repeatedly over the last few days, but nothing changes.
Any suggestions? I tried downloading the installer from Apple's download page, but it results in the same error. Is there perhaps a clean version of 10.4.8 I can download from somewhere?
It's really frustrating not being able to run iTunes because of an OS "upgrade."

Then, stop using Software Update, click the Downloads link at the page's top, and manually download the COMBO update. As for iTunes, apparently you installed a later version. With 10.4.6, your quite a few updates behind: OS, security, iTunes, and QuickTime, just to name a few. Before you update, be sure you make a bootable backup/clone. Details for doing that are in these:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

I was offered an itunes update yesterday and said yes to install it. Now it won't open.

I was offered an iTunes update yesterday and said yes to install it. It seems to have installed it. Now it won't open.

Download and Install Java: http://support.apple.com/kb/DL1421

Iphone software update downloads on itunes but wont install. iphone 5 now in recovery mode.

Hi All,
Tonight i tried to upgrade my iPhone 5's software (iOS 8) but the download failed and my phone went into recovery mode.
Now after downloading the iPhone software update via iTunes it will not install on my phone. Just says 'download complete' then 'processing file' then nothing. Clciking restore iphone agian we just go through the same loop of downloading the same software.
Appreciate any help.

crid04 wrote:
this is the message when i plug into itunes. 'iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.' before and after software download...
So restore the phone. I'm not sure I'm understanding what the issue is.

Need to update Bios on Satellite 4060XCDT to install Linux

I need to update the bios in order to install ubuntu 7.10.- Where can I get the latest BIOS?
Thanks

This notebook is a little bit old and there are no real new BIOS versions.
Take a look on this site
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
In the Archive -> Satellite Archive -> Sate 40xx you will find you notebook series and the BIOS.
The newest one was released on 16/05/02 -> its 8.20 BIOS

I got a software update message this morning and clicked install and restart. Now my e-mail icon has disappeared from the dashboard. How do I get it back?

I got a software update message this morning and clicked install and restart. Now my e-mail icon has disappeared from the dashboard. How do I get it back?

Don't recall the exact wording. But it is the same in appearance as others. Anyway, problem solved using RogerWilmut1 reply to someone else. I opened Applications and got the icon back. Thanks for responding.

HT4561 After updating to 10.6.3, I installed the 10.6.8 update just to start experiencing these font issues. HELP! How do I get the fonts to display correctly in my browsers especially (Chrome & Safari)

After updating to 10.6.3, I installed the 10.6.8 update just to start experiencing these font issues. HELP! How do I get the fonts to display correctly in my browsers especially (Chrome & Safari)

What I ended up having to do was open up the Font book & remove duplicates. I knew it was Arial that was causing the problem, so I deleted the duplicate of that font. Inadvertantly I deleted all the Arial regular font, so I had to reinstall one copy. That was the solution. Thanks!

HT4623 i have already did the update and the i clicked on install now then they told me that the phone is oing to restart and it didn't work the apple signe is always appearing

i have already did the update and the i clicked on install now then they told me that the phone is oing to restart and it didn't work the apple signe is always appearing

Reset, hold both home and power buttons for about 10 seconds until the iPhone restarts itself. If still problems, Restore iPhone again with iTunes on computer. If you have trouble, put iPhone into Recovery Mode. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.

Update 10.3.4.0 - 0% installed

Similar Messages

Maybe you are looking for