Update 3.1 Failed - Restore error 9/13/1603/1604/1611/2002

Now I know what 13, 1603 and 1604 mean. I've solved those problems. I've gotten it to attempt a restore severa times where it appears to be preparing to upload data then the phone restarts and shows the itunes icon with the USB cable. This is when i've started seeing error codes 9, 1611 and 2002 (only once). I've tried EVERYTHING under the support page that I know someone will post, don't bother. Sorted out the USB issues and iswp file issues... but i'm lost now. Can anyone help. HP Pavillion dv6000, Vista. I do not have another PC to try.

Just ran into something similar today. One of the users I support unplugged her iPhone during the 3.1 update and it rendered her phone useless. Recovery mode didn't work, but I did have some luck with Google (while waiting for the Apple support tech to finish writing up my case over the phone). The trick is to try putting the phone in DFU mode, which is different from recovery mode because it doesn't load the iPhone OS. It took care of the iPhone I was seeing the 1611 error on. If DFU mode does not work, then it is most likely that you have a real hardware issue and the only way to fix it is to have Apple repair the phone. It won't hurt to try the DFU mode trick though since it won't make anything worse. Here's how you do it:
To enter DFU mode:
1. Connect your iPhone to your computer
2 . Turn iPhone off. You may have to hold the power and home buttons down together to force the phone off
3. Once the phone is off, hold the power and home buttons together for 10 seconds exactly
4. After 10 seconds, release the power button but keep holding home until the computer recognizes that a USB device was plugged in
5. iTunes should detect your iPhone correctly, and also allow you to restore to the factory default settings. The iPhone screen should also be black when it's recognized. If it shows the iTunes logo with the cord, then you're in recovery mode and should start over at step #2.
Give this a try and let us know if it worked
Link to my post about this:
http://techierambles.blogspot.com/2009/09/restore-iphone-with-error-13-or-1611-i n.html

Similar Messages

  • Built-In Keyboard Firmware Update 1.0 fails with error 23:3 on MacBook 2,1

    I attempted to install "Built-In Keyboard Firmware Update 1.0" on two laptops tonight.
    Macbook Pro 3,1:
    Hadn't experienced the issue that the firmware would resolve. Installed the update anyway, successfully, and continued to have no problems since.
    Macbook 2,1:
    Hadn't experienced the issue that the firmware would resolve. Tried to install the update, but it failed with error "23:3". After the failure, the keyboard was non-responsive for about 30-60 seconds, during which time I assume it restored/re"booted" itself. Keyboard function was restored automatically after this time, though there was no indication that it would return, and I had to suffer a minor sweat. Still, I didn't learn I power cycled the system and tried again, but the update never installed successfully.
    Lessons learned -
    If it ain't broken...
    That said, Apple seems to have designed their hardware well enough to be able to recover from a failed firmware update. In this case, you just have to pray a little until the keyboard responds again.
    Apple: be so kind, let us know what 23:3 means, and if needed, update the Firmware Updater.
    //

    Hi,
    I was just wondering how you were able to get the macbook to accept the update? I had to take mine to apple store and get entire keyboard and trackpad replaced in my macbook. They then told me to ignore the update cause they did not have any other keyboards to replace if it happened again.

  • Product: Java X Update X.. removal failed or error status 1602

    Hi
    Managing several different environments I repeatedly run into the same error on "to many" computers.
    We use SCCM as our primary distribution tool and install Java using the embedded MSI and a custom made MST.
    End user platform is: Windows XP and/or Windows 7
    The installs works flawlessly in 95% of all cases but the remaining 5% are still a big hurdle to have to handle manually.
    Problem:
    Installing the newest version returns error code: 1602.
    For a long time I have been ignoring it since it generally means that the end user has cancled the installation. But upon furter investigation I have found out that this is not the case.
    On the individual computer the eventlog actually reports: Product: Java X Update X.. removal failed or error status 1602.
    It is the uninstall of the previous version that fails.
    Does anyone know what causes this and possible a solution?
    Best Regards,
    Christian

    The same problem happened to me. When upgrading from JRE 1.5.0_5 to JRE 1.5.0_6, suddenly no applets would load, and all I could see was the little red X.
    I tried to change proxysettings (I dont use a proxy, but it is told at http://www.java.com/en/download/help/redximage.xml that it is due to wrong proxy-settings). It didn't help.
    I tried to turn off zonealarm. It didn't help.
    I tried to clear the browsers cache. It didn't help.
    I have been using both Firefox 1.5, and IE6. None would load the java-applets.
    So I uninstalled all older JRE versions and installed JRE 1.4.1_02. It worked!
    I then tried to upgrade to JRE 1.5.0. It didn't work.
    Now I am back at JRE 1.4.1_02 without knowing why I had to downgrade through 6 versions that through the last year or so has been working fine on my machine.
    I have no idea why it suddenly wouldnt work with the newer versions.
    Any ideas?
    Thank you.

  • Can't update CC:Installation failed. Error Code: U44M1P7

    This is the error message I get when trying to update CC:
    DPS Desktop Tools CS6 26.0.0 Update
    Installation failed. Error Code:  U44M1P7
    What's going on?

    Ok, I have now checked the log file according to the specifications in the troubleshoot section. The solution suggested in the error section of the log file was first to uninstall and then reinstall Photoshop. I then tried that. Bummer. BIG mistake. Now I don't have ANY version of Photoshop installed, because the Adobe Application Manager will not download and install Photoshop again because it stubbornly insist that my installation of Photoshop (which I do NOT have anymore as I uninstalled it) is up to date.
    So... now I have two paid-for versions of Photoshop. One, which is part of a Creative Suite Master Collection and the one from my Creative Cloud membership. But none of them on my MacBookPro anymore. How should I proceed from here? Reinstall the old Creative Suite paid-for-and-owned-version and cancel the Creative Cloud subscription, or...?

  • Thunderbolt Firmware Update 1.2 fails with error 0xb

    Can't update on my MacPro (2013) with OSX 10.9.5. Stuck on firmware 22.2. When I try to install the update manually I get an error that the update is already installed, but both of my displays are on the old 2011 firmware (22.2). Diving into the event logs reveals underlying problem, but I don't know how to fix. Sugestions? Both displays suffer the black display bug this is supposed to fix.
    2014-12-09 11:29:47.354 TBTUpdateChecker[1317:507] Host board-id = 'Mac-F60DEB81FF30ACF6'
    2014-12-09 11:29:48.185 TBTUpdateChecker[1317:507] J59 at 'IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG0@1/IOPP/BR00@0/IOPP /BR12@9/IOPP/UFS2@0/IOPP/DSB0@0/IOPP/NHI2@0/AppleThunderboltHAL/AppleThunderbolt NHIType2/IOThunderboltController/IOThunderboltPort@5/IOThunderboltSwitchType2/IO ThunderboltPort@3/IOThunderboltPort@1/IOThunderboltSwitchType1' with UID = 0x00010001005d7070 (0x0)
    2014-12-09 11:29:48.185 TBTUpdateChecker[1317:507] Switch already has a valid UID (0x00010001005d7070)
    2014-12-09 11:29:48.186 TBTUpdateChecker[1317:507] UID did not need recovery
    2014-12-09 11:29:48.186 TBTUpdateChecker[1317:507] Found TBTD at route 0x3
    2014-12-09 11:29:48.186 TBTUpdateChecker[1317:507] Checking firmware version
    2014-12-09 11:29:48.186 TBTUpdateChecker[1317:507] TBTD ROM Version = 22.2
    2014-12-09 11:29:48.187 TBTUpdateChecker[1317:507] Firmware not up to date.
    2014-12-09 11:29:48.187 TBTUpdateChecker[1317:507] Will update route 3 with UID 00010001005d7070
    2014-12-09 11:29:48.353 TBTUpdateChecker[1317:507] J59 at 'IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG0@1/IOPP/BR00@0/IOPP /BR10@A/IOPP/UFS0@0/IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL/AppleThunderbolt NHIType2/IOThunderboltController/IOThunderboltPort@5/IOThunderboltSwitchType2/IO ThunderboltPort@3/IOThunderboltPort@1/IOThunderboltSwitchType1' with UID = 0x00010001005abfe0 (0x0)
    2014-12-09 11:29:48.353 TBTUpdateChecker[1317:507] Switch already has a valid UID (0x00010001005abfe0)
    2014-12-09 11:29:48.354 TBTUpdateChecker[1317:507] UID did not need recovery
    2014-12-09 11:29:48.354 TBTUpdateChecker[1317:507] Found TBTD at route 0x3
    2014-12-09 11:29:48.354 TBTUpdateChecker[1317:507] Checking firmware version
    2014-12-09 11:29:48.354 TBTUpdateChecker[1317:507] TBTD ROM Version = 22.2
    2014-12-09 11:29:48.355 TBTUpdateChecker[1317:507] Firmware not up to date.
    2014-12-09 11:29:48.355 TBTUpdateChecker[1317:507] Will update route 3 with UID 00010001005abfe0
    2014-12-09 11:29:48.358 TBTUpdateChecker[1317:507] 0x156d Host ROM Version = 19.2
    2014-12-09 11:29:48.358 TBTUpdateChecker[1317:507] Host EFI: 0116.B05
    2014-12-09 11:29:48.359 TBTUpdateChecker[1317:507] 0x156d Host ROM Version = 19.2
    2014-12-09 11:29:48.359 TBTUpdateChecker[1317:507] 0x156d Host ROM Version = 19.2
    2014-12-09 11:29:48.359 TBTUpdateChecker[1317:507] Cannot update because of error 0xb

    There is no "cover" on a MacPro. It is not a laptop. I tried updating one at a time. Failed with the same error.

  • Software update caused two failed restores?

    I went to sync my daughters' ipod touches and both said they needed to have a software update.  I accepted the software update, but both failed and said I needed to restore.  I attempted to restore and both attempts failed... both screens now show the connect to iTunes screen.  What is going on?

    put it into recovery mode
    See here
    http://www.apple.com/support/ipodtouch/assistant/restore/
    Then restore
    http://support.apple.com/kb/HT1414

  • Left side touch note working - took back up with PC companions - repaired with SUS - restore of contacts etc failed - restore error - touch still not working ..... Experts can i get some help ?

    Hi Guys / Experts / Arnab,
    The left side touch of my phone screen was not working. Was not able to type numbers 1, 2 and alphabets Q, W etc.
    I repaired with SUS after taking back up with PC companion.
    While restoring the backup, i got RESTORE ERROR, and almost everything got restore except few apps and CONTACTS, which is the most important thing in a mobile .
    ---> TOUCH IS STILL NOT WORKING <----
    Guys can i expect some help here ?
    Regards,
    Sush
    Solved!
    Go to Solution.

    I see
    this might help
    http://talk.sonymobile.com/message/448070#448070
    https://github.com/nelenkov/android-backup-extractor
    SO HERE IS HOW YOU CAN RESTORE YOUR DATA:
    Get your Fullbackupdata-Contactfile.
    1.  First go to your backupfile: (C:\Users\YourUserName\Documents\Sony\Sony PC Companion\SomeNameDependsOnLanguage\
    2. Make a Copy of your backup-File (crtl+c, crtl+v)
    3. We want to change the file extension, so make sure you see it. If you don't see a .dbk at the end of your file, go in the explorer window in the left upper corner on organise -> Folder and search options. Change to view and then deselect "Hide extensions for known File types"
    4. Rename (F2) the file to backup.zip
    5. Open the zip with 7zip or something similar.
    6. Navigate to Applications\com.sonyericsson.android.contactsimport and get the fullbackupdata file which is lying in this folder.
    7. Put this file on your Desktop.
    8.Download this jar-File: http://ge.tt/64TJmne/v/0?c
    9. Put the .jarFile also on your desktop.
    10. Doubleclick the .jar-File. After a few seconds a new file with the name "restore.tar" should show up (If not check if your fullbackupdata-File really has the name "fullbackupdata" and is on the desktop)
    11. Open the .tarfile with 7Zip
    12. Navigate to restore.tar\apps\com.sonyericsson.android.contactsimport\f\
    13. Copy full_backup_vcard.vcf to the Desktop.
    If everything worked you're finished, you can open this .vcf File via Windows-contacts -> import or put it directly on your phone and import it there (open Contacts. Settingsbutton -> impot)
    If you don't trust my .jar file, you can also download the github-project follow their orders and compile it yourself.
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • HT4623 Can't update iPhone and get restore error -1. Help?

    I tried to do the latest update on a 3GS iPhone I gave my daughter (minus the phone usage) and it started the restore then got stuck with error message -1.  I tried everything it said to do under the error to correct it and it still won't restore.  This happened with the last update that I tried to do on another iPhone we gave our daughter to use and I just ended up upgrading my phone to replace the iPhone that couldn't be restored to anything.  I can't do that again and shouldn't have too.   Any ideas on how to fix this?  Thank you for any suggestions!

    Well, millions of people are trying to do the exact same thing. Yes, the servers are busy, busy, busy. Please be patient.

  • Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011

    Hello Everyone,
    When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
    2010 sp3. Can anyone help me with this error?

    I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
    This is in the log;
    [10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
    '{ server.company.com }'
    [10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
    [10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
    [10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
    Internet services successfully stopped
    Attempting start...
    Restart attempt failed.
    The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start.  The service, or dependent services, may had an error during its startup or may be disabled.
    Process standard error:
    [10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
    [10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
    [10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
    [10-08-2014 21:55:31.0640] [1] 0.  ErrorRecord: Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
        Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
    " was run: "Process execution failed with exit code 1062.".
    [10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
    [10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
    [10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
    Anyone has any ideas?

  • I have downloaded the Photoshop trial in CC when it gets to the updating stage it fails with error code 49

    It told me to retry or contact support - I have retried several times & it keeps coming back to error code (49)

    Generally, this error is caused by something running on the computer which may be locking files that are trying to be updated. First, try simply restarting the computer to close running applications and unlock all files. If that does not allow the update to complete, try disabling all applications which run in the background. Disable startup items, services | Windows or Start in Safe Boot mode | Mac OS X

  • 5s 8.1 iOS: Restore errors 4005. Won't update or restore

    Hi Guys,
    I downloaded the 8.1 update via the latest iTunes and connected my 5s to update.
    The update failed and i got the 4005 restore error: iOS: Restore errors 4005, 4013, and 4014
    Now when turn on the 5s it just shows the symbol to connect to iTunes.
    So I plug in and get this:
    I click 'Restore' then get this
    So I click 'Restore and Update', then I get Restore Error 4005 again and get stuck in an infinite loop!
    I did create a backup yesterday so I'm not worried about any lost data.
    I have deleted the update and I'm downloading again now. I will also try with a different USB cable and on a different PC.
    Any suggestions or a fix would be much appreciated?
    Thanks.

    Also FYI: The USB cable is a new authentic Apple lighting cable
    Okay so I deleted and downloaded the update via iTunes again, plugged in the 5s via USB and still get:
    After Restore and Update: 'Extracting software...'
    Then:
    Then:
    Then:
    'Extracting software...
    Then: Preparing iPhone for install.
    Now:
    And the 'Connect to iTunes symbol' disappears leaving the screen still turned on but all black.
    Then after a few minutes:
    Hope that helps...

  • ConfigMgr 2012 Agent Installation permanently failed with Error 1603

    We have some clients, where the agent must be reinstalled. But it fails permanently with Error 1603. I have tried the following steps allready:
    Delete the CCMSETUP and CCM Folder and start from scratch
    Repair WMI by deleting root\ccm
    Recreated the WMI Repository
    Register all *.dll and *.mof in WBEM
    Cleaned up with the ccmclean Tool
    We use SCCM 2012 SP1 CU3
    The error happens on Vista and Windows 7
    From the logs, it looks that something went wrong with the ccmexec service, but I'm not sure. In the Eventlogs are some entries from the Search Service that the Service unexpectly stopped. But not much more.
    CCMSETUP.LOG
    MSI: Action 11:25:16: CcmRegisterSystemTask. Registers a System Task with WMI.
    MSI: Action 11:25:17: CcmRegisterHostingConfiguration. Register configuration for Configuration Manager Client service.
    MSI: Action 11:25:17: CcmSetObjectSecurity. Applying security permissions
    MSI: Action 11:25:18: CcmSetupLogging. Sets component logging information in WMI.
    MSI: Action 11:25:19: SmsSwDistSetCacheConfig. This custom action gets the cache configuration, disables the cache options in control panel if required by the site settings and updates the registry keys accordingly. It also configures the security for the cache
    directory.
    MSI: Action 11:25:19: CcmRegisterPerfCountersRollback. Rolls back any changes made by CcmRegisterPerfCounters if install fails.
    MSI: Action 11:25:19: CcmRegisterPerfCounters. Registers performance counters gathered in the CcmRegisterPerfCountersInit action
    MSI: Action 11:25:20: CcmRegisterComponentsRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
    MSI: Action 11:25:20: CcmRegisterComponents. Registers components passed in from CcmRegisterComponentsInit
    MSI: Action 11:25:20: CcmInstallUtil. Calling InstallUtil.exe to register .net WMI provider
    MSI: Action 11:25:20: SmsSetLUAAccessPermissions. >Gets permission for evelation on Vista and grants each COM object permission.
    MSI: Action 11:25:20: Ngen. Calling NGEN.exe
    MSI: Action 11:25:22: InstallServices. Installing new services
    MSI: Action 11:25:22: WriteEnvironmentStrings. Updating environment strings
    MSI: Action 11:25:22: CcmSetServiceConfig. Sets WMI ServiceRootDir and configures CCMEXEC service.
    MSI: Action 11:25:22: CcmRegisterWinTaskRollback. Rolls back the changes made by CcmRegisterWinTask.
    MSI: Action 11:25:22: CcmRegisterWinTask. Registers tasks with Windows Task Scheduler.
    MSI: Action 11:25:22: Rollback. Rolling back action:
    File C:\Windows\ccmsetup\{1AF71F68-6089-4211-ADDC-06DF40606141}\client.msi installation failed. Error text: ExitCode: 1603 Action: ErrorMessages:
    Next retry in 120 minute(s)...
    CLIENT.MSI.LOG
    MSI (s) (CC:B4) [11:26:01:135]: Executing op: ComponentUnregister(ComponentId={F7DB5D80-2A09-4F1B-BB55-8D69AA9A94A6},ProductKey={FD794BF1-657D-43B6-B183-603277B8D6C8},BinaryType=0,)MSI
    (s) (CC:B4) [11:26:01:137]: Executing op: ComponentUnregister(ComponentId={4942E0A1-7621-4D9A-93B5-AFA1A0B7FCC6},ProductKey={FD794BF1-657D-43B6-B183-603277B8D6C8},BinaryType=0,)MSI
    (s) (CC:B4) [11:26:01:137]: Executing op: ActionStart(Name=CcmStopServiceRollback,Description=Calls CcmStartService. Starts the ccmexec service.,)MSI
    (s) (CC:B4) [11:26:01:139]: Executing op: CustomActionRollback(Action=CcmStopServiceRollback,ActionType=3329,Source=BinaryData,Target=CcmStartService,)MSI
    (s) (CC:B4) [11:26:01:159]: Creating MSIHANDLE (12483) of type 790536 for thread 6068MSI
    (s) (CC:64) [11:26:01:159]: Invoking remote custom action. DLL: C:\Windows\Installer\MSICFD.tmp, Entrypoint: CcmStartServiceMSI
    (s) (CC!50) [11:26:01:221]: Creating MSIHANDLE (12484) of type 790531 for thread 5712MSI
    (s) (CC!50) [11:26:01:222]: Closing MSIHANDLE (12484) of type 790531 for thread 5712MSI
    (s) (CC!50) [11:26:01:222]: Creating MSIHANDLE (12485) of type 790531 for thread 5712[11:26:01]
    WARNING: Failed to delete setup in progress time-stamp with error 0x80070002MSI (s) (CC!50)
    [11:26:01:222]: Closing MSIHANDLE (12485) of type 790531 for thread 5712MSI (s) (CC:64)
    [11:26:01:223]: Closing MSIHANDLE (12483) of type 790536 for thread 6068MSI (s) (CC:B4)
    [11:26:01:223]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)MSI
    (s) (CC:B4) [11:26:01:223]: Error in rollback skipped.      Return: 5MSI
    (s) (CC:B4) [11:26:01:223]: Entering MsiProvideAssembly. AssemblyName: Microsoft.ConfigurationManager.AssetProvider.dll,Version="5.0.0.0",Culture="neutral",PublicKeyToken="31bf3856ad364e35", AppContext: , InstallMode: -4MSI
    (s) (CC:B4) [11:26:01:223]: Pathbuf: 0, pcchPathBuf: 0MSI (s) (CC:B4) [11:26:01:244]:
    MsiProvideAssembly is returning: 1607[11:26:01] The service 'ccmexec' is not installedMSI
    (s) (CC:B4) [11:26:01:255]: No System Restore sequence number for this installation.MSI
    (s) (CC:B4) [11:26:01:255]: Unlocking ServerMSI (s) (CC:B4) [11:26:01:307]: PROPERTY CHANGE:
    Deleting UpdateStarted property. Its current value is '1'.Action ended 11:26:01: INSTALL.
    Return value 3.Property(S): UpgradeCode = {252DA259-82CA-4177-B8D0-49C78937BA3E}Property(S):
    SourceDir = C:\Windows\ccmsetup\{1AF71F68-6089-4211-ADDC-06DF40606141}\
    Has anybody came around this behavior?
    Kind regards Stefan Somogyi

    CCMClean.exe is not supported for ConfigMgr 2012, but I guess that you know that :)
    Have you tried 'ccmsetup.exe /uninstall', wait for it to complete and then install again?
    Perhaps the steps taken in the last comment from this thread can help you:
    http://social.technet.microsoft.com/Forums/en-US/98fadc7b-2bdd-4b46-a0cb-ba43ebd10aaf/client-reinstall-failing-on-upgraded-clients?forum=configmanagerdeployment
    Regards,
    Nickolaj Andersen - MCTS - www.scconfigmgr.com - @Nickolaja

  • SCCM Client.msi failed Exist Error Code 1603

    Hello ,
    I tried my level best failed to figure out the issue
    I did WMI rebuild, Restart, re-install client and all 
    The CCMSETUP.log file giving below error message 
    C:\windows\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi installation failed. Error text: ExistCode :1603
    Action:
    Errormessages:
    Nexttry 120 Minutes 
    Cheer's up
    Best Regard's Krishna

    MSI (s) (30:D4) [13:40:24:694]: Product: Configuration Manager Client - Update 'CLP1041' could not be installed. Error code 1603. Additional information is available in the log file C:\windows\ccmsetup\Logs\client.msi.log.
    MSI (s) (30:D4) [13:40:24:701]: Windows Installer installed an update. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: CLP1041. Installation success or error
    status: 1603.
    MSI (s) (30:D4) [13:40:24:702]: Product: Configuration Manager Client - Update 'CLP1046' could not be installed. Error code 1603. Additional information is available in the log file C:\windows\ccmsetup\Logs\client.msi.log.
    MSI (s) (30:D4) [13:40:24:702]: Windows Installer installed an update. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: CLP1046. Installation success or error
    status: 1603.
    MSI (s) (30:D4) [13:40:24:702]: Product: Configuration Manager Client - Update 'CLP2052' could not be installed. Error code 1603. Additional information is available in the log file C:\windows\ccmsetup\Logs\client.msi.log.
    MSI (s) (30:D4) [13:40:24:702]: Windows Installer installed an update. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: CLP2052. Installation success or error
    status: 1603.
    MSI (s) (30:D4) [13:40:24:703]: Note: 1: 1708 
    MSI (s) (30:D4) [13:40:24:703]: Product: Configuration Manager Client -- Installation operation failed.
    MSI (s) (30:D4) [13:40:24:703]: Windows Installer installed the product. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
    MSI (s) (30:D4) [13:40:24:704]: Attempting to delete file C:\windows\Installer\f2319c7.msp
    MSI (s) (30:D4) [13:40:24:704]: Unable to delete the file. LastError = 32
    MSI (s) (30:D4) [13:40:24:704]: Attempting to delete file C:\windows\Installer\f2319c8.msp
    MSI (s) (30:D4) [13:40:24:704]: Unable to delete the file. LastError = 32
    MSI (s) (30:D4) [13:40:24:704]: Attempting to delete file C:\windows\Installer\f2319c9.msp
    MSI (s) (30:D4) [13:40:24:704]: Unable to delete the file. LastError = 32
    MSI (s) (30:D4) [13:40:24:708]: Deferring clean up of packages/files, if any exist
    MSI (s) (30:D4) [13:40:24:708]: Attempting to delete file C:\windows\Installer\f2319c7.msp
    MSI (s) (30:D4) [13:40:24:709]: Attempting to delete file C:\windows\Installer\f2319c8.msp
    MSI (s) (30:D4) [13:40:24:709]: Attempting to delete file C:\windows\Installer\f2319c9.msp
    MSI (s) (30:D4) [13:40:24:709]: MainEngineThread is returning 1603
    MSI (s) (30:E4) [13:40:24:711]: RESTART MANAGER: Session closed.
    MSI (s) (30:E4) [13:40:24:711]: No System Restore sequence number for this installation.
    === Logging stopped: 12-09-2014  13:40:24 ===
    MSI (s) (30:E4) [13:40:24:713]: User policy value 'DisableRollback' is 0
    MSI (s) (30:E4) [13:40:24:714]: Machine policy value 'DisableRollback' is 0
    MSI (s) (30:E4) [13:40:24:714]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (30:E4) [13:40:24:714]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
    MSI (s) (30:E4) [13:40:24:714]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
    MSI (s) (30:E4) [13:40:24:714]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (30:E4) [13:40:24:714]: Restoring environment variables
    MSI (s) (30:E4) [13:40:24:715]: Destroying RemoteAPI object.
    MSI (s) (30:04) [13:40:24:715]: Custom Action Manager thread ending.
    MSI (c) (EC:C8) [13:40:24:717]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (EC:C8) [13:40:24:717]: MainEngineThread is returning 1603
    === Verbose logging stopped: 12-09-2014  13:40:24 ===
    Best Regard's Krishna

  • Updating hybrid configuration failed - Kerberos authentication: The network path was not found

    I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
    When I run the Manage Hybrid Configuration, I receive the following error:
    Updating hybrid configuration failed with error
    'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
    path was not found.
    The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
    [1/5/2014 21:21:1] INFO:Opening runspace to
    http://[servername]/powershell?serializationLevel=Full
    [1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
    [1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
    error occured while using Kerberos authentication: The network path was not found. 
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
       at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
       at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
       at System.Management.Automation.Runspaces.RunspacePool.Open()
       at System.Management.Automation.RemoteRunspace.Open()
       at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
       at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
       at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
    I have sought help, posting on the forum at community.office365.com -
    http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
    Has anyone else come across this problem running the Hybrid Configuration Wizard?

    Hello Darrell,
    Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
    http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
    looks good.
    As the article states you can run the Exchange BPA and it will check if any of these exist as well.

  • Symbian Anna update 1/2 failed to install

    The story so far. I did the first round Anna update (around 27 mb i think) OTA cos my Ovi Suite never able to update firmware on my n8 since trying to update it to PR 1.2, and I did try reinstalling, redownload, reboot PC, reg clean, ccleaner to fix the Suite but it still do not update my firmware at all. But that's another story.
    So I installed the 1st round, n8 rebooted to white screen, rebooted into homesceen with Midnight theme. SW update then shows 4 more items: Anna update 1/2, 2/2, Store and Social. The 1/2 was showing around 20++ mb. So I selected all 4 and update. Halfway through the installing process of 1/2 update (note the download part of 1/2 was very fast), I did plug in the power pin, cos the installation process was damn slow for 1/2. I did not notice wheher it finised installing cos later i checked it was already on 2/2 (downloaded and installing). It then went to the last two items and installed ok.
    Rebooted device, but SW update still showed Anna update 1/2 available (the only one left) and the download size is now 7166 kb. I proceed to update it, it failes with error but no error codes or any message what was the error about. I tried again and again, with fresh reboots, still failes. What gives?
    Even more, split screen not here. I did the uninstalling Swype, activating qwerty mode in portrait, still no split screen.  I do not have any Betalabs apps.
    My Quickoffice & Reader is not here anymore (the app manager not showing them too). Heck I bought the full ver of Quickoffice 6 last time. Wat a waste of my money now that ver 7 is out!!
    Anyone knows how to delete the "dowloaded cache" of SW updates? I want to force SW update to redownload this 1/2 item to try fix this issue.
    Thanks for listening and please help. Cheers!!
    Solved!
    Go to Solution.

    I got the same problem since this morning on both my N8 & just found out solution on a previous update error similar to this & completed the update on one of the N8. Re-trying on another one.
    Working Solution for failed update was found on Flashism's website quoted & "touched up" per below:
    Big thanks to user “Unick” on Nokia Support Forums, who posted a working solution to the problem, and there are couple of successful installs reported from the solution.
    I just deleted folder E:\Private\20019119\. After that I ran SW update on the phone & it restarted download of Symbian Anna Update 1/2 & 2/2 as well as Social, they  finished updates successfully.
    To delete the mentioned folder, follow these simple steps:
    • Connect your Nokia N8/C7 in Mass Storage mode to PC via USB cable
    • Locate and delete folder named “20019119″ under \Private folder of Mass Storage
    • Unplug the device from PC, and retry again. It should work.
    However, I still got no popup split keyboard after completing the updates & restarted the phone.

Maybe you are looking for