Update 31.3 caused mailing lists to fail.

My mailing lists were working fine until this auto update. A workaround for previous occurrences of this problem, that of a list name with no spaces did not work this time. Only selecting all the addresses in the list and dragging them to the address line works.
Can you please restore the mailing list function?
Thanks,
...Alan

No not back... you have an issue but it is clearly not the same one.
I am not able to reproduce an error on a daily build, so perhaps you might try restarting with add-ons disabled from the help menu to see if it is an aberrant add-on causing you grief.

Similar Messages

Latest iPhone update causes mail download to fail

I just doownloaded the latest iPhone update and it seems to be fine syncing one of my gmail accounts, but will not sync the main account. I've shut down and restarted several times and have also verified my data is correct but it still doesn't seem to fix it.

Did some searching - found this thread https://discussions.apple.com/thread/5677640?start=0&tstart=0 which recommended starting in safe mode, repairing disk permissions, and reinstalling the update with the offline installer, which worked.

10.7.4 update won't update properly, has caused Mail to not work. How do I reinstall 10.7.3 Mail?

Started the 10.7.4 install, and it halted. Turned my Mac off, started it back up, and apparently the 10.7.4 update didn't install, but it has caused the Mail function to not work AT ALL - I get a long error report that is auto sent to Apple.
I downloaded Lion from the Apple store, but have my Snow Leopard disk. How do I go about re-installing Mail?
Thanks for any help you can provide.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

Have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lis

have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed

Hello, Edward and thank you for your note.
I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
Regards,
Mike

31.1.0 fails mailing list

Since recent update to V31.1.0. Thunderbird fails when sending to mailing lists. Running 64 Bit Windows 7. I read that this is Bug 1060901 but would like to add that I've tried suggested workarounds. Drag/Drop of names in the list works fine so I know all my addresses are OK. Changing spaces to _ in the list name only changes the error message slightly but doesn't fix the problem. Previous version of T'Bird worked fine. I need to use lists on weekly basis so would appreciate fix at soonest opportunity.
The following message to <MyNWfolks> was undeliverable.
The reason for the problem:
5.1.1 - Bad destination email address 'invalid domain "": no dot found'
Reporting-MTA: dns; ipsmtp1msp.int.opaltelecom.net
Final-Recipient: rfc822;MyNWfolks
Action: failed
Status: 5.0.0 (permanent failure)
Diagnostic-Code: smtp; 5.1.1 - Bad destination email address 'invalid domain "": no dot found' (delivery attempts: 0)

Have you voted for the bug?
Have you stated your OS, version of TB and supplied all the information you have stated in this question?
If no, then please tell them.
you seem to have some extra info that has not been said in the bug:
* https://bugzilla.mozilla.org/show_bug.cgi?id=1060901
In the short term, you may feel you want to use an earlier version.
You could uninstall Thunderbird via control Panel > Programs and Features and then reinstall version 24.7.
If using Windows OS then click on 'win32'
select the language of choice and then download the exe file.
* ftp://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/24.7.0/
Remember to switch off auto install - maybe choose the option to check for updates but ask me if I want to install.
* Tools > Options > Advanced > Update tab

After changing a mail list name in Server end, users can't see the update in outlook client

Dear all,
This is a real issue. I am a Help-desk in a global company and after changing a mail list name in Server end, users can't see the update in outlook client. Even I download Offline address book in full detail, user still can't see the change in her outlook.
Does anyone know how to fix it?
Thanks,
Franklin hong

Hi,
Would you please detail what you did by "changing a mail list name in Server end"? What is the mail list and what server?
If you switch to Online Mode instead of Cached Exchange Mode, does the user see the change?
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Updating podcasts causes my iTunes to fail and close

When I update my podcasts, whether manually by using the refresh button or allowing the program to go update, it causes my iTunes to fail and close. I have tried multiple times, closing and restarting, killing it in Task Manager and restarting, rebooting the PC, and even uninstalled and reinstalled iTunes. I do get a generic "ITunes has encountered and issue and will close now. Windows will notify you if there is a solution" message, but that's it.

Hi there rclifton99,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
-Griff W.

ITunes U Update mailing list

I have been assigned to share administrative duties on our college's iTunes U site. I am not the primary administrator.
Our primary admin gets "iTunes U Update" email postings sent via [email protected] . He has to forward these messages to me. I'd like to get subscribed to this email list as well, so that I can receive these messages directly.
I've already sent my question to iTunes U Request ([email protected]), and they replied:
At this time, there is no public iTunes U mailing list. We currently request that all questions be submitted to the forums at:
http://www.apple.com/support/itunes_u/
Any suggestions on how I can get subscribed to the "iTunes U Update" mailing list?

There is no email list exactly; those announcements are sent to the site administrator. Your school can can set your site administrator by logging into iTunes U as an admin, then going to "Site Settings". This loads a page that includes a section for "Site Administrator", where you can specify a contact name and e-mail address.
They don't support having multiple e-mail addresses, so if you want more than one person to get the e-mail, you should setup a group e-mail address (or group email forward) that you can all receive messages from.

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

iTunes:
AppName: itunes.exe
AppVer: 10.5.0.142
ModName: unknown
ModVer: 0.0.0.0
Offset: 001be6f6
Quicktime:
EventType : BEX
P1 : QuickTimePlayer.exe
P2 : 7.71.80.42
P3 : 4ea5c6ef
P4 : QuickTimePlayer.dll
P5 : 7.71.80.42
P6 : 4ea5c6d5
P7 : 00005b6d
P8 : c0000409
P9 : 00000000
That's consistent with another application (other than QuickTime) having dropped old QuickTime componentry in non-standard locations on the PC.
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Update caused mail 4.6 to reject pgptools add on

I performed an update on Oct-2-2012 and it appears after the update of the security software "security update 2012-004" my Mail 4.6 reports "incompatible plug-ins disabled, mail has disabled the following plug-ins gpg" See enclosure.
Has anyone had this problem with this new update?

I just did a security update and got the same message regarding MiniMail and MsgFiler. Still searching for a solution to this.

Latest Update Causes Mail to Crash

I ran "software update" yesterday and now Mail crashes randomly (it NEVER crashed before). I thought is was from previewing messages with "bad" HTML code, but turning off message preview didn't help. Sometimes it crashes while reading new messages, sometimes while composing. There are conflicting approaches to fixing the Mail crash problems: re-install the OS (wth?), delete files in preferences folders, make a new user account, re-install the app. I have been sending a bazillion crash reports to Apple, it would be nice if I knew if other people were having the same issue, if there will be a fix, and what the best approach to fixing the problem should be. For now I will rely on web mail to access the account.

Hi,
Was this the software update that included updating 10.5.5 to 10.5.6? If so, this issue may have arisen for you either because of two Mail plugins that no longer work or because there are more than one copy of Mail on your Mac. First see:
http://support.apple.com/kb/TS2486
and then
http://support.apple.com/downloads/Mail_Update
The latter special update will be offered in Software Update, but perhaps only if you make sure to remove any extra copies of the Mail app. The extra copy, is often found in the Previous System folder. Use Spotlight to look for multiple copies.
Let me know what you find.
Ernie

Right click on the mail list doesn't open the context menu any more.

Hi everybody,
Thunderbird stoped to show the context menu on the mail list recently. Right click just prints the crossing line. What the problem could it be?
Thanks anyone for any help.
Win 8.1 64
Thun 31.3.0

''Nick532 [[#question-1037921|said]]''
<blockquote>
Hi everybody,
Thunderbird stoped to show the context menu on the mail list recently. Right click just prints the crossing line. What the problem could it be?
Thanks anyone for any help.
Win 8.1 64
Thun 31.3.0
</blockquote>
''Toad-Hall [[#answer-668503|said]]''
<blockquote>
Very odd.
Right click on email in list should open a drop down selection.
Usually a crossed line through something denotes that it is marked as deleted in an imap mail account.
* http://kb.mozillazine.org/Deleting_messages_in_IMAP_accounts
See if there is a conflict with an addon.
Restart Thunderbird in safe mode.
Help > Restart with addons disabled.
then perform the same test; right click on email in list.
Do you get the drop down, if yes, then one of your addons is causing the conflict.
You would have to disbale each in turn to locate which one is the problem.
Maybe the addon needs updating.
Report back on results.
</blockquote>
I have the same problem too. When i restarted with addons disablem problem dissapeared but when i switch to normal mode and disable all off the plugins and addons the problem still remains.
Please help.

Forcing Update of Default Global Address List

How can I force update of the Global Address List (Default Global Address List). I have about 62 000 MailContacts objects which are synchronisze regularly with AD and the information feature correctly both in AD and under Mail Contact (EMC) in Exchange2007.
However, most of the MailContacts are not showing in the Global Address List. The Mailcontacts are missing both in Outlook and OWA.
What is the default schedule for the GAL created during exchange installation?
Though I know there is now possibility to edit it and that is not my wish, but can at least force an update so that it takes all the available information
Thanks

I started this thread in summer 2010 and occassionaly still being faced with this problem.
The Problem is actually to be able to "STAMP" Mailcontacts received from external source, without any addition EmaiAddress entry from the Default Policy (our
DomainName) being added to them. Everything works fine with OWA once „Update-GlobalAddressList“ is applied, but outlook seems not able to work correctly until
the “STAMPING” - Update-EmailAddressPolicy”
is applied. I get this error message when trying to send mail:
„Delivery has failed to these recipients or distribution lists:
RecepientDisplayName
The recipient's e-mail address was not found in the recipient's e-mail system. Microsoft Exchange will not try to redeliver this message for you. Please check the e-mail address and try resending this message, or provide the following diagnostic text to your
system administrator.“
In case there is not workaround to avoid the additional EmailAddress, then with which PS command can I run through only the Mailcontact and delete this additional EmailAddres
entry.
Thanks

SSRS: Failure sending mail: The transport failed to connect to the server.

I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
Now in SSRS I am getting this message:
Failure sending mail: The transport failed to connect to the server.
I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
I even approached our senior dba about it and he has never seen this happen.
Has anyone else experienced this issue?
Thank you,
Jessica

Thank you JJordheim.
IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
My rsreportserver.config file looks fine, or at least it does to me. Posted below:
<Configuration>
<Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
RNs8QwPFYNIXyq6vDD0=</Dsn>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
<InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
<Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
<URLReservations>
  <Application>
   <Name>ReportServerWebService</Name>
   <VirtualDirectory>ReportServer</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
  <Application>
   <Name>ReportManager</Name>
   <VirtualDirectory>Reports</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
</URLReservations>
<Authentication>
  <AuthenticationTypes>
   <RSWindowsNegotiate/>
   <RSWindowsNTLM/>
  </AuthenticationTypes>
  <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
  <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
  <EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
<Service>
  <IsSchedulingService>True</IsSchedulingService>
  <IsNotificationService>True</IsNotificationService>
  <IsEventService>True</IsEventService>
  <PollingInterval>10</PollingInterval>
  <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
  <MemorySafetyMargin>80</MemorySafetyMargin>
  <MemoryThreshold>90</MemoryThreshold>
  <RecycleTime>720</RecycleTime>
  <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
  <MaxQueueThreads>0</MaxQueueThreads>
  <UrlRoot>http://abraham/Reports</UrlRoot>
  <UnattendedExecutionAccount>
   <UserName></UserName>
   <Password></Password>
   <Domain></Domain>
  </UnattendedExecutionAccount>
  <PolicyLevel>rssrvpolicy.config</PolicyLevel>
  <IsWebServiceEnabled>True</IsWebServiceEnabled>
  <IsReportManagerEnabled>True</IsReportManagerEnabled>
  <FileShareStorageLocation>
   <Path>
   </Path>
  </FileShareStorageLocation>
</Service>
<UI>
  <ReportServerUrl>
  </ReportServerUrl>
  <PageCountMode>Estimate</PageCountMode>
</UI>
<Extensions>
  <Delivery>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <FileShareConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </FileShareConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <RSEmailDPConfiguration>
      <SMTPServer>192.168.11.210</SMTPServer>
      <SMTPServerPort></SMTPServerPort>
      <SMTPAccountName>
      </SMTPAccountName>
      <SMTPConnectionTimeout>
      </SMTPConnectionTimeout>
      <SMTPServerPickupDirectory>
      </SMTPServerPickupDirectory>
      <SMTPUseSSL>
      </SMTPUseSSL>
      <SendUsing>2</SendUsing>
      <SMTPAuthenticate>
      </SMTPAuthenticate>
      <From>[email protected]</From>
      <EmbeddedRenderFormats>
       <RenderingExtension>MHTML</RenderingExtension>
      </EmbeddedRenderFormats>
      <PrivilegedUserRenderFormats>
      </PrivilegedUserRenderFormats>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
      <SendEmailToUserAlias>True</SendEmailToUserAlias>
      <DefaultHostName>
      </DefaultHostName>
      <PermittedHosts>
      </PermittedHosts>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <DocumentLibraryConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </DocumentLibraryConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
  </Delivery>
  <DeliveryUI>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
    <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
    <Configuration>
     <RSEmailDPConfiguration>
      <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
  </DeliveryUI>
  <Render>
   <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
   <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
   <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
   <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
   <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
   <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
   <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
   <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
  </Render>
  <Data>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
   <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
  </Data>
  <SemanticQuery>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
     <EnableUnistr>False</EnableUnistr>
     <DisableTSTruncation>False</DisableTSTruncation>
    </Configuration>
   </Extension>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
    </Configuration>
   </Extension>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
  </SemanticQuery>
  <ModelGeneration>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
  </ModelGeneration>
  <Security>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
  </Security>
  <Authentication>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
  </Authentication>
  <EventProcessing>
   <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
    <Event>
     <Type>ReportHistorySnapshotCreated</Type>
    </Event>
   </Extension>
   <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
    <Event>
     <Type>TimedSubscription</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
    <Event>
     <Type>RefreshCache</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
    <Event>
     <Type>SnapshotUpdated</Type>
    </Event>
   </Extension>
  </EventProcessing>
</Extensions>
<MapTileServerConfiguration>
  <MaxConnections>2</MaxConnections>
  <Timeout>10</Timeout>
  <AppID>(Default)</AppID>
  <CacheLevel>Default</CacheLevel>
</MapTileServerConfiguration>
</Configuration>

Group Mailing Lists and Email Addresses

Howdy All,
A couple of quick questions:
1. When a Group mailing list is created does this create an equivalent Mailman mailing list (i.e. that would appear at the Mailman list URL)? I'm not so much concerned as to whether Groups uses Mailman behind the scenes just whether or not one could "further" admin the group mailing list through the admin interface.
2. What happens when you have a username "x", a group name "x" (which I commonly used on other Unixes) with a mailing list (implictly named "x"), and a Mailman mailing list named "x" (what was created as a Mailman mailing list in Server Admin) and then you email x@serverDNSname? Because I often use the same user and groups names this could be quite common.
Thanks for any thoughts on these puzzles.
Cheers,
Ashley.

I am beginning to suspect a combination problem- i.e. bad converter and bad Admin Tools.
The 10.6 Mail Admin manual states that:
+In Workgroup Manager, enable the Mailing List service for each group you want to have a mailing list address.+
+The setting is located in the Basic group options in Workgroup Manager.+
However, I no longer have these options in Admin Tools. I had them in 10.5.8, but not in 10.6 or 10.62 tools. I took a screenshot of the basic tab in WM:
Image: !http://i157.photobucket.com/albums/t69/dunkelza/Screenshot2010-01-08at81609AM. jpg!
I checked the About Workgroup Manager menu item and got "Version 10.6.2 (361.2.1)"
So it appears that the update to 10.6 not only failed to convert the LDAP settings correctly and/or map them to the mail system; but, that the update also removed my ability to see this and fix it through the GUI.

Update 31.3 caused mailing lists to fail.

Similar Messages

Maybe you are looking for