Update 4.01 asks to update, I say yes it appears to update then in the last step it goes back up to the update center and cannot connect, the update does not take effect and it keeps asking

I allow update 4.01 to update got thru all the steps and at the last step it goes back out to the update and cannot connect, the update does not take effect.

Sign out of your account on the iPad, restart the iPad and then sign back into your account.
Settinsg>Store>Apple ID - tap the ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
After restarting go to Settings>Store and sign in again.

Similar Messages

My canon 1200D says busy in AF mode and does not take picture, and takes blurr images in MF mode.

I had recenly bought 1200D camera and i am new to DSLR camera. Recently i had used camera in beach side and now find some vapours in lens and camera window. It does not take pics in AF mode and shows busy message. It takes pics which are blurr in MF mode.
What do i do now please suggest

"... some vapours ..."
Whoa, there, did you get it wet? Wettness and a Rebel don't do well together.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

Data in cell does not take effect immed

Hi I have JTable with all cells editable.
Problem is when user click on a cell and enter the data. That data does not get immediately take effect in table model unless user click on some other cell.
How can i make data immediately available when for example user click on Change button and user does not have to click on any other cell.
eg...row has 4 columns.....123....456....date....date
if user changes 123 to 321...and click on CHange button i have in panel. ..it does not take effect.....user has to click on some other cell ie eg 456 cell.....then press Change button.

in preparetable where i set the model, create columns, set renderer and editors. I even tried at the end of that method..ie added this line....still did not work....please help
public void prepairLnnTable() {
    lnnTableModel = new CellSiteLNNTableModel();
    lnnTable.setModel(lnnTableModel);
    lnnTableModel.addColumn("AAA");
    lnnTableModel.addColumn("BBB");
    lnnTableModel.addColumn("Effective From");
    lnnTableModel.addColumn("Effective To");
    ccpd6.setAllowedCharacters("0123456789");
    ccpd7.setAllowedCharacters("0123456789");
    for(int k = 0; k < lnnTableModel.getColumnCount(); k++) {
      TableColumn col = lnnTable.getColumn(lnnTableModel.getColumnName(k));
      DefaultTableCellRenderer textRenderer = new DefaultTableCellRenderer();
      JTextField textColumn = new JTextField();
      TableCellRenderer renderer = null;
//      TableCellEditor editor = null;
      if(k == CellSiteLNN.AAA) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd6);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.BBB) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd7);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_FROM) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_TO) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      col.setCellRenderer(renderer);
//      col.setCellEditor(editor);
lnnTable.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);
dFormat.setTimeZone(TimeZone.getDefault());
dFormat.setLenient(false);
}

Firefox 4.0.1 does not install properly. It keeps asking to reboot to finish. i can't uninstall it via Control Panel.

I had Mozilla Firefox 4.0 on Windows 7. I saved the bookmarks and uninstalled it. Downloaded 4.01 and did the typical standadrd install. It asked for a reboot to finish as expected. I rebotted and it did not finish installation. Then I tried to unistall it using control panel. So that removed it (or so it seemed). So i went to reinstall. Mozilla says reboot to finish install immediately. That of course does not work, can't uninstall as control panel does not see itand cant install. Anyone know how to completey get rid of this thing. No I cant delete it from the C:\Program files <x86> directory either. It's a hung mess.

You gone about it the wrong way I'm afraid. For future reference; to update version 4.0 to 4.0.1 and for future editions, go to '''Help '''| '''About Firefox''' and then click the '''Check For Updates''' button.
I think what you'll have to do now is follow instructions in this article to uninstall it: http://kb.mozillazine.org/Uninstalling_firefox
Once you've achieved that goal, go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop using either IE8 or 9. Save the file to your desktop when you see the prompt and then reinstall it from there.

My iphone 4 wont connect to any wifi. my home wifi is ok because my iPad works. it says cannot connect to network. does not ask for password

my iphone 4 quit connecting to my home wifi. ipad works fine. won't connect at other wifi spots. Says cannot connect to network.

Hey cgood59,
Thanks for the question, and welcome to Apple Support Communities.
I understand that you are having issues connecting to Wi-Fi networks with your iPhone 4. The following troubleshooting assistant may lead to a resolution:
Apple - Support - iPhone - Join a network Assistant
http://www.apple.com/support/iphone/assistant/wifi/
For more in-depth troubleshooting, refer to the following article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks,
Matt M.

Changing Position property of Binding Source does not take effect

I have a BindingSource, let's call it myBindingSource, whose DataSource is a List(Of myClass). There are several lines in the existing code that set the Position property of the BindingSource object and the set is effective, e.g. if
the Position value is 0 and I do this...
myBindingSource.Position = 1
...I can check the value of myBindingSource.Position and it is 1. However other times (and it may only be when the current value is -1) when I do such a set, nothing happens. The Position value remains at the previous value, e.g. after the above
line, SpecimenNavSource.Position is still -1. I have verified that at that point, the SpecimenNavSource.Count is greater than the value I'm setting, so it's not that it can't find something in that position.
Any ideas would be greatly appreciated.
Thanks.
mamacasc

Hello,
Here is a small demonstration project which has a BindingNavigator placed on the form. Pressing Button1 at any position will move bsData to position 0. With that can you show if different from the below what you are doing?
Public Class Form1
Private bsData As New BindingSource
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Dim People As New List(Of Person) From
New Person With
{.FirstName = "Karen", .LastName = "Payne"},
New Person With
{.FirstName = "Jim", .LastName = "Smith"},
New Person With
{.FirstName = "Mary", .LastName = "Olson"}
bsData.DataSource = People
AddHandler bsData.PositionChanged,
Sub(s As Object, ea As EventArgs)
Me.Text = bsData.Position.ToString
End Sub
BindingNavigator1.BindingSource = bsData
DataGridView1.AllowUserToAddRows = False
DataGridView1.DataSource = bsData
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
bsData.Position = -1 ' postion is set to 0
End Sub
End Class
Public Class Person
Public Property FirstName As String
Public Property LastName As String
Public Sub New()
End Sub
End Class
Lastly, I peeked at BindingSource.cs, source code for BindingSource and there is nothing there to allow moving below position 0.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

User exist CCUX0008 does not take effective

Dear Expects,
    I implement user exist CCUX0008 with very simple code NO_EXPL_EXT_PROCUREMENT = 'X' . in ZXCUCU15 include file.
    After I active it I found the external procured components still explore their children materials in T-code cu51/cu52/cskb/csk1/csk2/csk3.
     I am very puzzled what's happened? and could somebody tell me what the CCUX0008 do indeed and what is the logic of it?
Thanks
Jason

Dear,
Delete import parameter NO_EXPL_EXT_PROCUREMENT by using Transaction SE37 for function NO_EXPL_EXT_PROCUREMENT.
Create a new export parameter for this function module:
Parameter name:    NO_EXPL_EXT_PROCUREMENT
Type. spec.:       TYPE
Reference type:    C
Short text:        No explosion of components procured externally
Save it and test again.
Regards,
R.Brahmankar

I have replaced my router and cannot connect the airport

My ATT router has been replaced and when I set it up I now have no internet connection through my airport extreme

Check to make sure that the Ethernet cable is connected to one of the LAN <-> ports on the AT&T router and the WAN port (circle icon) on the AirPort Extreme.
Then, open AirPort Utility and click Manual Setup to check settings on the AirPort Extreme
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Your name for the network
Check mark next to Allow this network to be extended
Radio Mode = Automatic
Radio Channel = Automatic
Wireless Security = WPA2 Personal
Wireless Password = Your password
Confirm Password
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save any changes and restart the entire network again

Installation of Firefox 3.6.17 does not take effect, I keep being asked to install it (again), At least 5 times so far, and it never shows in the (Mac) Firefox menu "about Mozilla Firefox

I'm running on an iMac, OS 10.5.8, I've lost count on how many times I've been told there's an update for Firefox 3.6.16, I install it. the next time I restart, FF starts up, and I look at the about FF menu, and it shows I'm running 3.6.16. I've never encountered anything like this. What is going on? How do I tell.
Thanks,
Judy

I'm running on an iMac, OS 10.5.8, I've lost count on how many times I've been told there's an update for Firefox 3.6.16, I install it. the next time I restart, FF starts up, and I look at the about FF menu, and it shows I'm running 3.6.16. I've never encountered anything like this. What is going on? How do I tell.
Thanks,
Judy

Audio Boost does not take effect

I Sir,
I have Blackberry z10 New mobile. There is no option in Headphone Audio Effect. Now What is the problem.
MOD EDIT: Subject changed to reflect a new topic
msmani

Yes we've been waiting a long time for an audio scrub activate/deactivate function it's a good thing they added it.
But it would be even greater if it would work with keyboard scrubbing not only mouse scrubbing. However and it's very odd, it works frame by frame with the frame by frame buttons. But we all mostly use keyboard arrows I guess.
What is weird is when you deactivate audio scrubbing in the preferences (not using the Shift+S shortcut), it does work on mouse scrubbing AND keyboard scrubbing. But it's a waist of time to go to the preference menu each time you want to check just a single image of sound.
I submitted a bug request, and would love to see improvement for this in the next update.

Windows 8 user cannot connect to public OS X Lion share as Guest, keeps asking for a password even though the folder is public?

As title suggests...
OS X Mountain Lion public share works fine for Mac's but as a guest from Windows its adamant it wants a password. If I use proper credentials it will allow me in the public share from the windows PC but I dont want to add creditinatials it should be an open folder to Network (LAN) WORKGROUP users.
OS X Guest account is set to "allow guests to connect to shared folders"
The Public folder is set in "Sharing" as READ ONLY everyone.
Mac's can access the share without needing credentials.
Windows PC asks for Username and Pass (have tried Guest (no password) or just pressing enter (no details)
Searched these forums see a few other people with similar problems yet no Answers
Help please!!

Try this on your PC:
Start->Run...->Open:\\<ipadressofyourmac>\<sharename>
You will be prompted for your username and password.
Or
'My Computer'->'Tools'->'Map network drive...'
enter:
\\<ipadressofyourmac>\<sharename>
in the 'Folder' field.
Click 'Connect using a _different user name_.'.
Enter your server username and password.
Click 'OK'.
Click 'Finish'.

TS1398 my wifi connection on our mini ipad is grayed out and cannot connect to wifi, I have tried resetting and that did not work.

Our wifi is grayed out on our mini ipad; I have tried resetting network settings and that did not work. Any other suggestions?

Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
 Cheers, Tom

Why does converting word into PDF does not take the background color of the page?

When I do a page background on a document, and save as pdf, it does not take the background color. It shows only white background.

This may be a limitation with the built in PDF writer in OS X. Never tried it so I have no idea if it does the same on my Mac.
As this is not a MS Word problem you are in the right set of forums.
Have you tried another PDF writer other then the built in one?

I tried to update my iPod and now it's saying that iTunes cannot connect the iPod. What should I do?

I updated my iTunes and then went to update my iPod to the newer 4.2 version that it kept asking me to and now it says that iTunes cannot connect the iPod. My iPod is now unusbale because the screen on the iPod itself shows that i need to connect it to iTunes, but when I do, there's an error message that pops up telling me that iTunes cannot connect it. Help!! How do I fix this?!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem

I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

Ditto. Guest accounts shouldn't have a password. No way to enter one in System Prefs...

Update 4.01 asks to update, I say yes it appears to update then in the last step it goes back up to the update center and cannot connect, the update does not take effect and it keeps asking

Similar Messages

Maybe you are looking for