Update 4.1.108.32627 for ix12-300r is missing from download.

Even though Lenovo is indicating that this version is available, it's not been posted on the web site. Can we get that file posted or was it pulled for problems?

Hello jjc
The ix12-300r devices are not recieving 4.1.108, the latest update that has been released is 4.0.16
LifeLine Version 4.1.108.32449 – Release date 2/9/2015 for the following platforms:
EZ Media/HM3
ix2-ng, ix2-dl
ix4-300d
px4/px6-300d
px4-300r
px12-400r/px12-450r
Px2-300d
PX4-400d
PX4-400r
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Similar Messages

HT4623 SOMEHOW the icon for rotation lock is missing from the control bar. I tried to reset but my passcode doesn't work. First, how do I find my passcode? Then, if I reset, will it return the rotation lock to the control bar?

I don't know how it happened why, but the icon for rotation lock is missing from the control bar. Second problem, the passcode for my iPad isn't working. I wrote it down, so not sure what the problem is. HELP

If the setting for the rotation lock is missing it is because you are using the side switch to control the rotation in Settings>General>Use Side Switch to>Lock Rotation. The software switch in the control center should be for Muting system sounds.
you have to restore the iPad in orde to unlock it now.
iOS: Forgotten passcode or device disabled after entering wrong ...
If you are sure that you are entering the correct passcode, reboot the iPad and then try again and see if it is accepted.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I paid for songs that are missing from my list where are they?

i paid for songs that are missing from my list where are they?

Correct.
Audiobooks have never been available for redownlaod and have never been listed among the content that can be redownloaded.
As always, it is your responsibility to back up your content.

I have a mac and continue to get messages to update to firefox 7.0 for security support is that from mozilla or a some thing else.

I continue to get messages to upgrade firefox to a 7.0 version for security upgrade<, is this from firefox or a suspicious message. it does not use the firefox logo.

You can use the portable Firefox version for websites that only work with older Firefox versions.
You can find the portable Firefox 2.0.0.20 version under "Mozilla Firefox, P.E. Legacy > Mozilla Firefox":
Win: http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox,%20P.E.%20Legacy/
Are you sure that the HSBC bank site only supports such an old Firefox version?
A bank site should known better then to force visitors to use old and no longer supported browser versions.
Can you post a link to a page that you can access without authorization (log in) that gives such an error message ?
Do they have a help page that list supported browsers?

Problem installing iTunes update: "Can't start" iTunes "because MSVCR80.dll is missing" from my computer. Please help!

Please help! I tried to update my iTunes as prompted, but it did not install correctly, and now I am getting the following message and do not know how to fix the problem:
"The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling this program to fix the problem."
Another window gives me this message:
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)"
BUT I AM AFRAID TO REINSTALL iTUNES and lose my library! Would greatly appreciate learning how to resolve this porblem without losing my music!
Cheers!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Is it normal for files to go missing from an external hard drive?

I've posted about this issue before but for slightly different reasons. I'm about to buy a new hard drive (the old one is full), probably I'll go for the exact same model, and I want to know if the problem I had described here has happened to Mac users.
I use a Retina MBP with OS X 10.8.4 that also runs Windows 8 on boot camp. At the same time I have an Acer Aspire and what I used to do is download movies onto my external drive with my MBP in Mac - I would also rename the files in Mac - and then connect the drive to my Acer so I could access the movies there.
One day I noticed that some of the files, after I had renamed and moved them to a new folder on the same partition, had gone missing. As I described in my old thread, it was a weird problem because those "missing" files would appear in Windows but not in Mac. But even in Windows when you could see the folders, they were all corrupted as the system indicated to me - the folders couldn't be accessed and the movies wouldn't play.
Thankfully I haven't had this issue again but then I haven't dared to move any of my movies to a new folder either. Not since that incident. I'm pretty sure that I wouldn't have lost those movies and had them corrupted if I had kept them in their original location. Is it normal for files to go missing or be corrupted when you move them back and forth, especially when you use an external drive with one OS (Mac) and then switch to another (Windows)? I've always wondered if this was an issue. I never formatted the drive when I got it, I just plugged it in and used it. That was before I bought my MBP.
I also was unable to delete those corrupted files/folders. Windows wouldn't let me and in Mac, they didn't even show up. I solved this eventually by using Disk Utility to repair the drive.
Now I'm fine with letting my files stay put if that's what it takes to keep them safe and secure, but I'd be more comfortable if I can understand what went wrong all those months ago.
The hard drive I have is this one from Samsung.

Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the iTunes Library.itl file in the moved iTunes folder.
If you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
Longer answers if for any reason you do not think all library files are inside your iTunes folder (changed preferences settings at some point):
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
For the record there's this reference for iTunes 11 but it really doesn't strike me as having the specifics you need. iTunes 11 for Mac: Move your library to another computer - http://support.apple.com/kb/PH12168
2011 ilounge article: Transferring your iTunes library - http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/ - An article with good background information (similar to the links above), particularly if you are not sure your media files are all grouped for quick answer above. Unfortunately under the single term "transferring library" it describes two very different moves; relocating just your media (not really transferring your library and not recommended unless you really need this configuration), and relocating media+database (really your whole "library"). Make sure you understand the difference before electing to move only media.

I installed lastest update and now receive a message MSVCR80.dll is missing from computer. I have tried reinstalling 3 times.

I updated the latest sofftware from Apple and have received a message - MSVCR80.dll is missing from computer. I tried several times to reinstall but haver the same error message come and now I can't open itunes.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't normally affect its library, but that should be backed up anyway.
(99134)

"Enable Access for Assistive Devices" is missing from Yosemite and my QuicKeys program depends on this to work. Help!

This is my second day trying to get my QuicKeys application to work in Yosemite, but "Enable Access for Assistive Devices," which QuicKeys needs to work, is missing from Yosemite. I have gone through the entire System Preferences panel (Security and Privacy, Accessibility, Keyboard, etc.) without success - it's just not there. I have checked this app in the Privacy pane and dragged
"QuicKeysUserEventHelper" out of the QuicKeys Resources folder into the Applications folder so it could "appear" in the Privacy pane, and then checked it there. Is there any way to enable access for assistive devices - a Terminal command, perhaps?
QuicKeys is my most used program, which I have had since its inception at least 10 years ago! Help!

Thank you for your reply! I did everything that Startly recommended (actually, gb2), and when I dragged the QuicKeys Helper into the Privacy box. I didn't see it, but after I quit and restarted QuicKeys, it worked! However,I had first dragged the QuicKeys app to the trash, emptied it, then restarted. Next, I redownloaded QuicKeys from Startly and THEN I went to gb2's directions. All together, my QuicKeys now works on my MacBook Air. BUT NOW, I keep getting the warning that says that this version and activation code are already in use by another user! I am also getting those warnings on my Mac Pro - which had the same problem yesterday (QuicKeys not working), until I heard back from a Technical Advisor from Startly, who told me about trashing the app and redownloading from their site. Last night, that version of QuicKeys worked WITHOUT my having to drag the QuicKeys Helper app into the Privacy pane. Perhaps it is there, but invisible - the helper app is not visible on either of my computers' Privacy panes.
OK, NOW WHAT DO I DO? Every 20 seconds or so, I'm getting those annoying warning signs (on BOTH computers) and requests to put in my activation key, and then told that it is being used by another user!!!
AM I EVER GOING TO BE ABLE TO USE MY 2 LICENSES FOR MY 2 QUICKEYS PROGRAMS???

Oracle 10g (10.1.0.2) for Linux x86 missing from download page?

Hello,
Why isn't there a download link to Oracle 10g (10.1.0.2) for Linux x86 on the 10g download page?
And what's the difference between 10.1.0.3 and 10.1.0.2?
Thanks

Hi, 
 The level of one release is different with plateform.
On the Oracle Database 10g Downloads you can find only final release, and not intermediare patch. For example, the 10gR1 for Linux x86 is 10.1.0.3, and for Windows 32-bits this is 10.1.0.2, after what you can upgrade to the last patchset.

 Nicolas.

How do I turn off password protection for apps and keep them from downloading on all my apple devices

How do I turn off password protection for apps on my Iphone4 and keep them from loading on all other devices?

What do you mean by "password protection for apps"?
To keep apps from downloading on a device automatically, go to Settings> Store> and turn off the things you don't want downloaded automatically.

"Look for Apple TVs" is missing from iTunes10 prefs.

based on apple's kb http://support.apple.com/kb/TS1453 :
Choose iTunes > Preferences (Mac) or Edit > Preferences (Windows), click Apple TV, and make sure "Look for Apple TVs" is selected"
I don't have the ATV in itunes 10.1 (10.6.5):
!http://www.gballard.net/apple/Atv10.jpg!
I do have it in itunes 9 (10.4.9):
!http://www.gballard.net/apple/Atv9.png!
I recall some time back I unchecked "Look for Apple TVs" in itunes 9 so it didn't keep trying to update, but since updating to itunes 10 it appears broken.
I tried to read through this previous thread but it went all over the place.
http://discussions.apple.com/thread.jspa?threadID=2568436&start=60&tstart=30
+++
I suppose I could erase/restore the ATV and get them talking again to upload 130GB of content...

I booted off an external FW of an Erase Start From Scratch 10.6.5 (OS only) install I use for maintenance.
itunes 8 (default first time opened), 10.6.5:
!http://www.gballard.net/apple/10-65-it8.png!
I booted off an external FW of a 10.6.4 clone of my full working hard drive (the source drive is the drive I am using now with the itunes 10.1 problem).
The clone has itunes 9.2 and still shows the atv icon.
The clone includes my full working itunes.
itunes 9.2, 10.6.4 clone:
!http://www.gballard.net/apple/it92-10-64.png!
This tells me the problem occurred somewhere in iTunes 10 and/or 10.6.5.
sigh...

Updates whacked my Outlook Calendar - now the appointments are missing from Outlook

- while they are supposed to share (per the Organizer) between OUTLOOK and my Pearl 9100 - only the BB has all entries - serveral erased from Outlook.. I have tried resyncing several times - no success. Happened today after downloading the latest update. How do I "fix" this screw up on RIM's part?

It's more weird than that. I have tried muliple times to download all calendar entries-from the BB to Outlook. But I have found i have 2 calendars - a default and a Facebook calendar. The default downloads but the facebook calendar doesn't. I have deleted the Facebook App - and have searched for a facebook calendar - no luck.
The Facebook entries are in green. I don't understand since the Facebook calendar only applies to events ,birthdays etc - not routine entries. If I could find where they are stored I could download them - anyone have this issue?

My entries for 2015 are all missing from my calendar - how do I get them back?

On checking my calendar today all my entries for 2015 are missing - everything is still there pre Xmas 2014 - I've also check my icloud backup and they aren't on there

idubois
Welcome to the Apple Discussions.
If I browse the files using finder (and Show Package Contents) they're all divided into the different folders they were in originally and the way I'd like them to be split into events, so I don't really understand. Any hints?
Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the existing file.
or try
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Regards
TD

The "verisign" logo for secured sites is missing from the status/addon bar. How can I get it back?

Whenever I used to sign it to ebay, the "verisign" logo would show red/unsecured. A refresh of the page would reload with a secure setting.
I can no longer see the logo anywhere but refresh out of habit anyway hoping it is then secure on the next load.
If the logo showed for any other sites/pages I wouldn't know.
Is there a way to get it back so I feel safer?

Firefox has a built-in security indicator, but it has changed. The status bar was redesigned out of Firefox, so now you use the area to the left of the address (green, blue, or plain) to check whether the site is secure.
[https://support.mozilla.com/en-US/kb/Site%20Identity%20Button Site Identity Button | How to | Firefox Help]
Other discussions about this change mention an add-on you can use if you really prefer seeing a lock: [http://support.mozilla.com/en-US/questions/796225 firefox 4 where is the padlock bottom right corner | Firefox Support Forum | Firefox Help].
If you were using an add-on from Verisign, its icon might be on the Add-ons toolbar. You can turn that on using:
View menu > Toolbars > Add-ons Toolbar
If you have the orange Firefox button, tap the Alt key to temporarily display the classic menu bar.
Does that fix it?

9iDS for Linux - OWB, Disco Admin etc are missing from download

I've just installed 9iDS release 2 on a laptop running SuSE 8.0 and Oracle 9i release 2 Enterprise Edition.
As my work primarily involves 9i database and OWB 9i, I was to say the least dissappointed that 9iDS for Linux does not include OWB, or for that matter Disco Admin or Reports Admin.
When you go to download 9iDS for Linux, the download page says "This download includes the full distribution of Oracle9iDS", and the previous page (which lists all the elements of the download, next to the links for Windows, Linux, HP-UX and so on) does not in any way indicate that OWB is not included in the download.
There is, separately downloadable, an 'early adopters' release of OWB for Linux, but this does not include the bridging technology to Discoverer, Express and 9i OLAP. As it's 'early adopted' presumably it's not too stable.
Has anyone used this? Has anyone tried using a laptop purely with Linux on it as a way of using 9iDS? Does anyone at Oracle know when a full release of 9iDS, with all the elements found in the Windows release, will be made available? In the meantime, Oracle should clearly state on the Linux download page that not all the elements of 9iDS are found in the Linux version.
Mark Rittman
Plus Consultancy.

I don't know the answer, but Designer will never be ported to Linux : It is a Windoze stuff...and without Designer...i will never be able to do 100% Linux :(

Update 4.1.108.32627 for ix12-300r is missing from download.

Similar Messages

Maybe you are looking for