Update 7.1.1 causes a problem?

I recently accepted to have my iPod updated to the latest 7.1.1 version and now I can not turn my iPod off by holding down the play/pause button like I had been able to before. Please send suggestions on how to turn it off cause my battery is dying!
-XSplizz-
Dell Inspiron 6000 Windows XP

I have had the same problem occasionally after upgrading. I have been rebooting using the Menu and center buttons; when it comes back, I can then use the Play/Pause button to turn it off.

Similar Messages

Update 1.01 has caused numerous problems

I have read about people having problems individually, but I can't believe all that is wrong with my phone after updating my firmware last night.
The first thing is my AC charger no longer works. Makes no sense why it shouldn't. I have read about the issues with the AC bricks, but I am almost convinced it has something to do with the update.
None of the sounds work now, and the behavior of the iPhone when plugging in and removing the headset is erratic. Basically, no sound comes out of the speaker for anything, keyboard clicks, speakerphone, music without my headphones attached, etc.
Also, I can't hear anything from the receiver when making a call, so I have to use the headphones right now to be able to hear the other end of the conversation.
I have tried power cycling, rebooting, sticking the headphones in and removing them repeatedly, and whatever else was recommended in the other threads. I will try restoring when I get back from my trip (which unfortunately am leaving on today), but until then, what else can I do?
THIS *****. I need to use my phone, obviously. Nice update. I should have left 1.0 on there.

Nice update. I should have left 1.0 on there.
Now logically, if the update were responsible for the failures on your phone, everyone who updated would be having the same problem. These discussions would be stuffed with threads identical to yours, and there would be no-one saying the update fixed one thing or another, as there have been since it was released.
It is obviously not the update from which you are suffering.
That isn't to say you don't have a series of problems, but drawing the wrong conclusion can only lead you to approaching the process of fixing the issues the wrong way.
-Power adapter: first test that you can charge via USB to ensure the phone itself isn't faulty. If you can, take the adapter to an Apple store or call Apple. If you can't get it to charge via USB, take the iPhone to an Apple store or call Apple.
-Sounds: As said, plug and unplug the headphones a few times in rapid succession. Many who have reported the same issue have resolved it this way.
-If sick of trying the fixes and finding they don't work, take your phone to an Apple store or call Apple - in either case to report the problems and ask for assistance in resolving them. They will either help you fix them on the spot, or tell you the options for returning your phone for repair or replacement.

Update to Excel 2013 causing a problem with Sage 500 ERP import feature

I work in an accounting office that relies heavily on importing data from Excel into Sage 500 ERP accounting software. We recently began updating from Office 2007 to Office 2013. Now we are running into a
huge hurdle as we find Excel 2013 no longer supports MDI, and has moved exclusively to SDI. This is a problem for us, and here's why.
Sage 500 has a "Data Porter" command which launches Excel, but opens a blank workbook in Excel. After triggering the Data Porter, we open a previously saved Excel workbook containing our data, select the "Add-Ins"
tab, and click the appropriate button to begin the import. In Excel 2007 this works because the workbook with the data opens in the same "window" as the blank workbook.
In Excel 2013, the workbook containing the data can only be opened in it's own new window which has not established the line of communication with Sage 500's Data Porter, and the import function is not available.
So far the only workaround we have found is to right-click on a tab in the file containing the data, click "Select All Sheets," then "Move or Copy" them to the new blank workbook. The import into Sage 500 is successful when
we do that. However, we need to save the workbook with the updated import information returned by Sage 500, so we must also do a "Save As" for the new workbook, assigning the same file name as the original data file, overwriting
it. This makes what used to be a simple procedure quite cumbersome, and we fear the risk of data loss may be significant.
Is there any way to make this process work the way it does in earlier versions of Excel that support MDI (Multiple Document Interface)?

Is there any way to make this process work the way it does in earlier versions of Excel that support MDI (Multiple Document Interface)?
At a glance, it seems the answer might be...No.
Note
There is no MDI compatibility option in Excel 2013.
From: http://msdn.microsoft.com/en-us/library/office/dn251093.aspx
You should contact Sage, to see if they have solutions/suggestions, but I think it will require Sage to re-develop the Dataporter Add-in ?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

I use osx 10.5.8. Will the iTunes update 10.2.2 cause me problems? Should I download it or not?

I've had problems with software downloads making certain programs unusable. Is iTunes 10.2.2 ok for me to download on my macBook Pro using osx 10.5.8? I can't seem to find the specifications for minimum system requirements for that download.

Hello Aralyne,
You will have to update to Snow Leopard in order to connect with App Store.
Before you buy anything, first make sure your Mac is compatible.
Minimum specs for Snow Leopard.       Mac OS X v10.6 Snow Leopard -Read the Technical Specifications
Note. You can now buy Snow Leopard from the Apple store on line again.
In USA.   Go to Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
In Europe or otherwise … call your National Apple Helpline. Find it at … http://support.apple.com/kb/HE57
In the UK …   Mac OS X 10.6 Snow Leopard - Apple Store (UK)        Price is currently £14.
Once you have bought and upgraded you will need to apply the Combo updater for Snow Leopard.          Mac OS X 10.6.8 Update Combo v1.1
Then run software update.
From this point onwards you can use the App store.

Update 7.3.1 causing more problems than solutions?

I'm not sure what the new update was meant to do but once I updated to 7.3.1, my transfer rate lowered drastically
I used to have 4-6 MB/s originally before the update
But on the same day, once I updated it and nothing else changed, it lowered to less than 1 MB/s
Can someone tell me what's so great about the update and if I could downgrade this machine?

Change your wireless channel, 9 or 3 are usually good. What kind of internet do you have, you may need it in bridged mode. Your issue is issolated to your network if you had two of them with issues because mine works fine and so do about 990,000 more. Hard reset the base station, use WPA2 encryption, channel 9, and disable both SNMP and configuration over WAN. All of these settings can be easily found within Manual setup if you play around a little... or just call AppleCare, the mac genious's are there to help to. See if it has the same problem in a different environment, I'd bet it has something to do with your settings, possibly a double nat.

TS1627 I Can no longer synch my iPhone and iPad to Outlook using iTunes on a Win 7 Pc. I updated to iTunes 11.1.4.62 a few days ago. Don't know if that caused my problem. I've reset the Synch History, deleted any Notes in Outlook that don't have a subje

I Can no longer synch my iPhone and iPad to Outlook using iTunes on a Win 7 Pc. I updated to iTunes 11.1.4.62 a few days ago. Don't know if that caused my problem. I've reset the Synch History, deleted any Notes in Outlook that don't have a subject. Grateful for any help.

You might have better luck in the iTunes for Windows community. I'll ask the hosts to relocate your post.
iTunes for Windows

I get a pop-up warning window stating that something is tricking firefox to update, what's causing this problem and is it serious?

Every other time I'm using Firefox, I get a warning pop-up window stating that something is trying to trick Firefox to update. I'm not sure if I have a virus or any other unwanted program that is trying to corrupt my computer. Please let me know what it could be. I have McAfee and it's actively running every time I use the internet, so I'm not sure whats causing this problem. Please help. Thank You.

It's a Web scam that only affects your browser, and only temporarily. There are several ways to recover.
1. Some of those scam pages can be dismissed very easily. Press the key combination command-W to close the tab or window. A huge box will pop up. Press the return key and both the box and the page will close. If that doesn't happen, continue.
2. Press and hold command-W. You may hear repeating alert sounds. While holding the keys, click the OK button in the popup. A different popup may appear, which you can cancel out of as usual.
3. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and uncheck the box marked Enable JavaScript. Leave the preferences dialog open.
Close the malicious window or tab.
Re-enable JavaScript and close the preferences dialog.
4. If the Preferences menu item is grayed out, quit Safari. Force quit if necessary. Relaunch it by holding down the shift key and clicking its icon in the Dock. None of the windows and tabs will reopen.
After closing the malicious page, from the menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the

The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?

Have you tried yesterday's update to iOS8.0.2?
iOS 8.0.2
This release contains improvements and bug fixes, including:
• Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
• Fixes a bug so HealthKit apps can now be made available on the App Store
• Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
• Fixes an issue that prevented some apps from accessing photos from the Photo Library
• Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
• Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
• Better support of Ask To Buy for Family Sharing for In-App Purchases
• Fixes an issue where ringtones were sometimes not restored from iCloud backups
• Fixes a bug that prevented uploading photos and videos from Safari
For information on the security content of this update, please visit this website:
http://support.apple.com/kb/HT1222

PS Vita Firmware Update(s) causing a problem

My brother? He's been using my account. He doesn't have one

It's been a while since I used my Vita. I lent it to my little brother to play games on for a while. I got it back from him yesterday. There've been a good few updates since then but it seems one of them has caused a problem.
I felt like returning to my Disgaea 2: Dark Hero Days save file only to get the infamous DLC Error when booting up. I followed all the tips and tricks that were used back on the PSP but to no avail. I looked around a bit more and people were reporting this from around January time. My save file was from October 2013 so there's definitely been a lot of updates since then. One post I read said it was working fine until he updated his Vita earlier this year. I have redownloaded and installed the game and all it's DLC a couple of times and also tried formatting my memory card after backing up my data. Even if I start a new game, the DLC cannot be found. Any help would be great, but I don't know if that would work. It seems that only someone official looking into this problem and seeing if they can find a solution is the only answer. Also, I have no idea if this is affecting any other games at this moment. Honestly I had no idea where to post this thread. I thought due to it looking like an update may have caused this that it may be best here. If not then I apologise. I'd also like to know how I can get in touch with anybody who could look into this if it's no good posting here. Any help is much appreciated, Thanks.

Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?

Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?
iMac is connected via wirelss to printer/scanner. All was working OK until update.

Assuming that the HP software is up-to-date, but still not working, have you tried Image Capture in the Applications folder. Does that work?

'Laserjet 1022n Windows Update' causing printing problems: print jobs don't stop printing

Hello,
a few days ago, I installed the Laserjet 1022n Windows Update on my Windows 7 64 bits and since then, I can't print a page normally: the page doesn't stop printing. I am using a network port with TCP/IP.
I made several trials to solve this problem:
- uninstall the printer driver and installing it again (I tried the last version on the HP site and an older one that worked perfectly before)
- update the firmware of the printer to the last version on the HP site.
When I pause the printer and start the print job, you see it arriving in the list. Resuming the printer, the print starts on the printer but you see that the job stays in the list, flashing again and again. The printer keeps printing the same page.
I don't know what I can do to solve this problem. There is no mean of uninstalling the HP Laserjet 1022n software update because it doesn't appear in the list of installed programs (well on the list of the done updates by the way op windows updates).
I have the same problem printing on the same printer from another Windows 7 PC (with the same windows update done)
But I have no problem printing with my laptop on another network printers.
Is there someone having the same problem and how to solve it ?
Thanks for answering
This question was solved.
View Solution.

I found the solution on this site : http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing
You just have to uncheck the chekbox "Enable two-way communication" on the "Ports" tab of the printer properties and it works normally again !!!!

Update causing HUGE problems

     My husband recently updated his iPhone 4S to the 6.0 update. (I also have the 6.0 update, but didn't get the problems with mine, and we have the exact same phones, computers and iPads.) We didn't realize that not only would it take literally hours and hours (and almost all of our 10g data plan for the month, not to mention using up almost all of his free space on the phone), but now it is asking to update to the 6.0.1 - which is apparently for iPhone 5! The 6.0 version has wiped out all his emails - which show on his MAC and his iPad, but nothing comes through on the iPhone. All it does is "search", which uses up even more data, and then just shows nothing.
     He tried to do a "Restore" through iTunes, but it said it would take another 12 hours!! (and thus, taking us way past our data usage, resulting in more cost!)
     Is there a very simple, easy, non-time consuming or data-consuming way to just restore back to the original settings? Any why doesn't the update on the MAC automatically sync the update to the iPad and iPhone, without having to do each one individually? (Which for us, makes SIX updates!)
     I'm starting to hate Apple. He definitely does. Please someone, help!

     My husband recently updated his iPhone 4S to the 6.0 update. (I also have the 6.0 update, but didn't get the problems with mine, and we have the exact same phones, computers and iPads.) We didn't realize that not only would it take literally hours and hours (and almost all of our 10g data plan for the month, not to mention using up almost all of his free space on the phone), but now it is asking to update to the 6.0.1 - which is apparently for iPhone 5! The 6.0 version has wiped out all his emails - which show on his MAC and his iPad, but nothing comes through on the iPhone. All it does is "search", which uses up even more data, and then just shows nothing.
     He tried to do a "Restore" through iTunes, but it said it would take another 12 hours!! (and thus, taking us way past our data usage, resulting in more cost!)
     Is there a very simple, easy, non-time consuming or data-consuming way to just restore back to the original settings? Any why doesn't the update on the MAC automatically sync the update to the iPad and iPhone, without having to do each one individually? (Which for us, makes SIX updates!)
     I'm starting to hate Apple. He definitely does. Please someone, help!

New Update 1.1.1 Has Serious Problems!

my father in law had his iphone updated at the apple store and he lost all of his info. the mac idiot (far from genious) said that my father in laws computer died when installing update cause the mac idiot failed to plug it in when he was working on it. he did not care at all that he lost all of his pictures nor did he bother to back it up before he updated the software.
I was hesitant to update after that but i still had to try. i updated all photos and did a sync prior to updating. when i downloaded and installed update it said that i had to *"connect iphone to itunes"* in a yellow triangle on the iphone. well, it was already connected so i did nothing. about 4 minutes later it gave me an error saying that *"there was an unknown problem with update"*. i closed that window and then another window popped up and it said that *"itunes has detected an iphone that is in recovery mode and needs to be restored."* so while i bit my lip i hit restore and it took a while cause of all the songs i had in my iphone. it synced everything back up to where i had it except the photos which i backed up in iphoto before hand. what a major pain in the butt!! Thanks Apple.
i thought all of this would be worth it because of the new fix to the speaker/earpiece volume issue. come to find out my volume is exactly the freaken same. what a bunch of BS. that really ****** me off big time. i can't believe it. apple got me all excited for this update just to let me down again.
the next thing i did was call my close friend jedhed and told him what happened. he said he would try the update with his phone and see what happens. he called me back a half hour later and said the same exact thing. he had to restore and that his volume was exactly the same as well. I called my father in law next to see if his volume was any louder and he said his was the same as well. i updated my wife's next same problem. had to restore and volume is no different. that is 4 out of 4 phones that have no increase in volume and had major issues with software update 1.1.1. now i have read a lot of the forms and i see some people saying that there volume is great and they had no problems with updating. i even saw people stating that their ipod volume was significantly louder too even though that was not part of the update according to the apple user agreement. all i saw was a fix to the earpiece and speaker volume on the phone not the ipod. so i don't understand people who are claiming that. now, is this volume increase people are claiming just in there heads. everywhere that i have read when people compare newer software with older software notice no difference. they you have people just say its way louder. are they crazy or is it way louder.
i am trying to understand the theory that some of the phones may have no problems with updating and are experiencing louder speaker volume but why would i get 4 out of 4 phones with same issue. if that was the case you would think that at least one of these 4 phones would be fine with the update and have louder speaker volume right? what is going on here? this is extremely frustrating and i am getting sick of it. this earpiece/speaker volume has to be fixed. it is way overdue. and for some of you stating that the volume was fine before the fix are just plane nuts. you must either have wolf hearing or your working in a lab with where it is so quiet you could hear a dust mite ****! give me a break. if your one of these people PLEASE don't reply to this post. i don't have time for your excellency.
if anyone has any thoughts on this subject please feel free to share them. i would really like to get some people posting some truth on this thread. Apple needs to hear us and do something about this once and for all. also, please don't even bring up anything about hacking phones or third party software as that does not apply to this situation at all. none of this phones have been hacked or have third party software, thank you.

Same issue here on 2 8GB phones (my phone and GF's phone.) Pretty annoying. Phones were not modded, hacked, or unlocked... ever. Bone stock.
One was updated using a PC, the other using a MacBook. iTunes of the latest version on both machines, both machines and phones rebooted before start. Both phones had auto lock disabled before starting the update process.
My phone was at version 1.0.2, and hers was at 1.0.1.
In-Call Volume of receiver and speaker is still very poor on both, but a teensy eensy bit better.
System sounds are much louder now and acceptable.
The vibrate function no longer works on the GF's phone post 1.1.1

Dual Monitor Causing System Problems?

Hi, I'm new to this site, so I hope this is where I ask this question! My design group switched to G5/Cinema Display screen from old g4 setups mid 2005. I retained my Mitsubishi Diamond Pro 2020u monitor to use as a secondary display for pallettes, extra files, etc. It's hooked up using a dvi-vga adapter.
My new G5 had hiccups from the start, but around March 2006 I started getting Kernel Panics almost every week, serious slow-downs, Adobe app crashes, etc. It got to the point that I was troubleshooting every week, but could never put a finger on exactly what was happening. IT archive-installed 10.4.4 after we discovered the system had been updated to 10.4.6 and we thought that would solve the problem. While that solved the issues that were relevant to 10.4.6 glitches, it didn't fix everything and little, persistent problems remained, including stalls, crashes and kernel panics. After removing suspect fonts, wallpaper, icons, updating software, repairing permissions, tossing preferences, and other troubleshooting over and over, we (I.T.) finally switched my cpu to another one in the department using data migration (just my user information, not software or other files). Still the same hiccups and even new glitches appeared (InDesign crashing on spellcheck, Photoshop not granting me access to save changes to files, etc.), including two more Kernel panics (within 5 minutes of each other) in the two weeks since we switched hardware. More troubleshooting fixed the app-specific problems, but there are still the persistent annoyances occurring.
I again did all the troubleshooting mentioned above and finally someone mentioned that I'm the only designer in our group using a dual display set-up. Could there be validity to the non-cinema display monitor causing these problems and if so, what is the solution? I've disconnected the second monitor for now, but would love to have it back. Also, we work with a server (for instance, the kernel panics only happen when I try to place a file from the server into InDesign CS2 using the place command, so there's another avenue to go down if the monitor isn't the issue.)Thanks!
G5 Mac OS X (10.4.4) graphic design applications
G5 Mac OS X (10.4.4) graphic design applications
G5 Mac OS X (10.4.4) graphic design applications

I only just disconnected the monitor, so it will take time to tell if that's a factor. As for the kernel panics, although it's always the same scenario (placing images from server through InDesign) they happen very randomly; it's not happening every single time I place a file. In fact, I just placed an image on the server into an ID doc I have on my desktop, no problem. So I can't say for sure that it has happened when working from my desktop or only when working on the server.
G5 Mac OS X (10.4.4) graphic design applications

Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth?!

Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!

ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me

Update 7.1.1 causes a problem?

Similar Messages

Maybe you are looking for