Update a Approval document

Dear all
Is possible to update values in approval document
for example Ravi is add one Purchase order No:100,this PO is sent to approval for Mr.Kumar
Now Kumar can edit that purchase order values? or he can take only decision Approve and Reject?

hi prasanna,
Check this link for how to cancel approved purchase order ?
https://forums.sdn.sap.com/watches!add.jspa?forumID=264&threadID=764728
Jeyakanthan

Similar Messages

  • Approval on updation of a document

    Dear experts
    I have a query. Can we create a workflow for the updation of already approved document?
    Scenario:
    Person1  : Publish a doc. D1 (goes for approval)
    Admin     : Approves it
    Person1  : Make changes to doc. D1
    at this point of time is it possible to send the doc for approval again?
    Or will this happen once we enable Approval process for that doc?
    Regards
    Aparnna

    Hi Aparnna,
    If approval has been switched on, each change on an approved document will put this changed document into the starting point of the workflow again.
    For endusers (with only read permission on that document), that means that the document isn't published any more (as long as it isn't published by approval again).
    If versioning has been activated, it's a bit different. In this case, the end-users always see the last document in the version list which has been published: If V1 has been published, and somebody creates a V2 of the same document by changing it's content, this V2 has to be approved again, and as long this hasn't been done, end-users still see V1. As soon as V2 has been approved, end-users will see V2.
    Hope it helps
    Detlev

  • Approval Procedure Question - changing an Un approved document or Approver

    Here is my situation.  I have set up an approval Stage with 1 approval necessary for Credit Memos.
    From time ot time,  the approver needs to change the Credit Memo before apporving.
    Also, from time to time,  the Originator of the Credit Memo needs to change the credit memo BEFORE it has been approved. 
    From what I gather, 
    1) The Approver can not change the Credit Memo BUT can Add the Credit Memo but only after approving it.
    2) The Originator of the Credit Memo can not change the Credit Memo unless it has been rejected, and then it is not an easy task to find where the document can be changed.
    3) Any manipulation of the documents from either the Approval Status reportor the Approval Decision report is not possible.
    Am I missing something here or is there an easy way to modify a pre approved document?
    Thanks in advance
    Dana

    Actually what I am trying to accomplish is have all Credit Memos approved.  I at the same time would like the person who is approving th eCredit Memo also make changes to the Credit Memo if changes need to be made.  The end user does not issue a Credit Memo (Update) until the goods are received back at their facility and checked.  At that time,  they would like the approver make the necessary adjustments if necessary and them update the Credit Memo.  I find it a bit cumbersome to have to send that Credit Memo back to the Origonator to be adjusted and then send it back for approval.
    Am I missing something here?  Is it possible for the apporver to not approve it and then make th changesand then update it? 
    Any other sugestions on how to handle this situation??
    BTW Thanks for the quick responses!!
    Dana

  • Any Report that updates the GR document number of R/3 to SRM

    Hi  Experts
    Can any one tell me is there any reoprt that updated the GR numbers of R/3 to SRM
    Because I have done the confirmations in SRM ( 4.0) it created a confirmation number but  the shoppingc art history is not updated with the GR document number .
    Similiar to like CLEAN_REQREQ_UP is there any report that updates the GR document number in the frontend. And also any table for this like BBP_DOCUMENT_TAB for watching the GR entry till the time it gets cleared.
    Please suggest
    Regards
    Srujan K

    Hi Muthu,
    Thanks for your reply.
    My concern is when I do the confirmations in the SRM the shopping cart history is updated with Confirmations number and i can see the status as approved but I am not able to find the GR number besides the confirmations number in the shopping cart history.
    ours is SRM ver 4.0. what could be the problem. when I do the GR from backend and wait for some time the GR document number is getting updated.
    But once after i do the confirmation in the frontend it should automatically post a GR is the backend and
    update the shopping cart history with GR document number which is not happening
    Do I need to check the idoc for this? if so where do i need to check in SRM or in R/3?  because this is in quality system as i doing the testing part.
    So please provide me some solution for this.
    Regards
    Srujan K

  • Item text (BSEG-SGTXT) is not getting updated in Payment document generated

    Hi All,
    Item text (BSEG-SGTXT) is not getting updated in Payment document generated through F110.
    After generating the payment document via Transaction Code u2013 F110, system is not updating the
    Text field (BSEG-SGTXT) in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
    In case of manual payment (F-53) we can input the text manually hence that will get updated in
    payment document but this thing is not possible with F110.
    How can I update it?
    Is there any configuration for that?
    Thanks
    Daniel Dorta

    Hi All,
    I've applied the two notes as recommended. However, when I run FBL3N for payment run items, the Text field is update with wrong data, i.e. not from the Text field in FB60
    Thus, I'll like someone to help me with what should exactly be done on the 'Step', 'Pre-requisite' and 'Substitution' side of the Substitution rule (TCode GGB1), I did not fill anything in the Pre-requisite box - is this right?
    Thanx in advance.

  • Item text is not getting updated in Payment document generated through F110

    Hi all,
    After generating the payment document via Transaction Code u2013 F110, system is not updating the Text field in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
    While processing the document via transaction code u2013 F110, in the layout shown for the Invoices to be considered for payment (screen of u201CEdit Proposalu201D), text is not getting updated. When we pressed F1 at the Text field (Which is blank) we came to know that it is a u201CItem Textu201D with u201CTable u2013 REGUEu201D /  u201CField u2013 SGTXTu201D.
    In BSEG (SGTXT field) as well as BSIK (SGTXT field) we are getting the Invoice document with the text maintained in it via MIRO or FI invoice.
    But while processing the invoices through Tcode - F110, in the layout of Edit Proposal (Table - REGUE / Field - SGTXT) we are not getting the u201CText fieldu201D but getting the other data such as Doc. No.( Table - REGUE / Field - BELNR), Fiscal Year (Table - REGUE / Field - GJAHR) etc for processing the proposal which is getting shown in BSEG as well as BSIK.
    In case of manual payment (F-53) we can input the text manually hence that will get updated in payment document but this thing is not possible with F110.
    Can anybody guide me on getting the ItemText (Not Doc. Header text) in FI payment document after F110 execution?
    Regards,
    Shridhar

    Hi Suresh,
    Thanks for the prompt reply. We will be obliged if you guide us in that respect since F110 is a Std. SAP code.
    Have you refer OSS before arriving at the conclusion of developing ABAP program since the Item Text is a std. field of Std. Tcode - F110. Same should had been get updated while making the payment in reference to the Invoice which haves item text in it ?
    Regards
    Shridhar
    FICO

  • Encountered error while updating the payment document

    Hi Guys,
    I encountered an error while updating the payment document of one of our bank account. See below error message:
    Error: Unable to lock the record. Cause: The record is being modified by another user
    thanks,
    gracie

    Hi Vikas,
    Repeat the changes you are trying to make one step at a time and make sure you click on update in both the series screen and the document numbers screen every time.
    I've faced this issue and doing this helped.
    Regards,
    Hamsa

  • How to restrict update to a document in state release to the contribution g

    How to restrict update to a document in state release to the contribution group.
    Hi I’m working with UCM 10g and I want to know if it is possible to restrict the update over a document that is on state release for the group of users that made the check in of the document ?
    thanks

    Yes, it is, but IMHO in a rather complicated way:
    - you could change the security settings (security group, or more likely, accounts) during the life cycle, or
    - you could implement collaboration management, and change security settings via ACLs
    Alternatively, depending on what you mean by "updating" documents you could also:
    - check-out the document by a system account (if you want to prevent your users to check-in a new version)
    - modify the GUI so that Update (metadata) action is not available to users (in theory, they could still access it via a direct service call) by a custom component
    - introduce a Java event filter (enhancing the UPDATE service) where you will implement whatever logic you want
    I would probably opt for the last options as it seems to me to be the cleanest solution (but yes, it requires some coding).

  • Profit center document created but profit center not updated in FI document

    Hi Experts,
    I have a strange issue; we created FI document via billing document (SD) where in profit center document got created but profit center is not updated in FI document.
    We have separate table to identify the profit center by customer.
    Please let know what could be the cause or reason for this kind of scenario
    Thanks,
    VK

    Hi Krishna,
    Though ur question seems very old, but now i got the same requirement as like you.
    So if you remeber what needs to be done for this issue thats very good help to me.
    My Requirement is : I have created Service Entry Sheet by referring PO and while releasing this Service Entry Sheet system is generating MIGO Doc and FI documents in background.
    And I have updated PERNR (Persnoal No.) in MSEG-SGTXT by using enhancment but it's not populating in BSEG-SGTXT.
    And I found an internal table while debugging i.e ; like ACCIT (not exactly ,similar to this ) where i have updated pernr and sgtxt but same thing will not available in FI Doc display (BSEG-PERNR or BSEG-SGTXG)
    So could you plz suggest what needs to be done to achieve this. Im assuming that, is it possible through BTE (Business Transaction Events) ?.  if yes, plz tell me how to proceed.
    Thanks
    Madhan

  • Updating a XML document with a processing instruction

    Greetings Guru's
    I have a fully functional XML database solution for our new system. The only thing left is for me to update a xml document in the database with a processing instruction to find the style sheet (JAXB strips it out when the XML must go back into the database).
    I can update complete nodes and node elements in the xml document using updateXML in a regular update statement, but I do not know how to add the following processing instruction to my documents.
    <?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
    [pre]
    Thanks in advance
    Derrick                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    SQL> var xmltext varchar2(4000)
    SQL> --
    SQL> begin
      2    :xmlText := '<Hello>World</Hello>';
      3  end;
      4  /
    PL/SQL procedure successfully completed.
    SQL> drop table t
      2  /
    drop table t
    ERROR at line 1:
    ORA-00942: table or view does not exist
    SQL> create table t of xmltype
      2  /
    Table created.
    SQL> set long 10000
    SQL> --
    SQL> insert into t values (xmltype(:xmltext))
      2  /
    1 row created.
    SQL> select *
      2    from t
      3  /
    SYS_NC_ROWINFO$
    <Hello>World</Hello>
    SQL> update t set object_value = updateXML
      2                              (
      3                                object_value,
      4                                '/',
      5                                xmlconcat
      6                                (
      7                                  xmlpi("xml-stylesheet",'type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"'),
      8                                  object_value
      9                                )
    10                              )
    11  /
    1 row updated.
    SQL> select * from t
      2  /
    SYS_NC_ROWINFO$
    <?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
    <Hello>World</Hello>
    SQL>

  • Duplicating An Approved Document

    Hi Experts,
    I have a scenario which is described below.
    A PO was generated which has gone through the approval procedure and has been approved. The originator has added the approved document and saved it.
    Now, the originator has to release another PO which has same materials as in the Approved PO. When the originator is duplicating the document it gives duplicates the PO but then the Vendor Code and Vendor Name fields are both disabled. Which does not allow the Originator to select the new vendor for the duplicated document.
    Any thoughts on this.. Is this a bug or the functionality is right as per SAP?
    Regards
    Rohan S. Kamble

    Hi Gordan, Rahul,
    My SAP B1 Version is 8.8 PL 10.
    Rahul:
    Yes with normal PO there is no such issue. Thats why i specified Approved PO. There is certainly an issue with the Approved PO's.
    Could any one please reconfirm if the behavior is occurring for PL 10?
    Regards
    Rohan S. Kamble
    Edited by: Reno on Feb 18, 2011 2:39 PM

  • Pop up to enter text in QA11 and then update in material document item

    Hi everyone,
                           I have a requirementt which states that: In QA11 t-code under inspection lot stock tab if any qualtity is entered in Blocked stock then user should be prompted for a pop to enter text and that text should finally update in material document item text.If anyone has encountered it earlier please let me know  .
    Regards Pallav

    Hi Pallav,
    Please use exit EXIT_SAPMQEVA_005 "Transfer of Inspection Lot Data to User Screen"  for this purpose and if necessary create a module pool screen for user interface.
    Regards,
    Gaurav

  • Problem in updating leave approval remarks.

    Hi Experts..
    The leave appliaction i am working on, is using WS12300111 workflow.
    When i tried to execute leave request cycle from Portal ESS, i found that the approver's remarks/notes gets updated in PTREQ_NOTICE Table.
    But that does'nt happen when i try to approve a leave request using PT_ARQ_REQUEST_EXECUTE bapi, from my webdynpro java application.
    Can anyone tell me why this is happening and which BAPI should be used to update the approver's remarks in PTREQ_NOTICE table during approval.
    Thanks and regards
    Asha.

    Hi Asha ,
    I am also facing problem with approver remarks. In my case, approver comments are getting repeated.
    How did you resolve the issue ?
    Please hep me on this
       Thanks,
       Arun

  • We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a m

    We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a method, using Acrobat, to make those updates to the pdf, or must we go back to the doc template and basically generate a new document?
    Also, our resulting pdf documents aren't searchable.  How can we generate pdf documents that are searchable?  I may want to search for a part value or name within the body of these pdf documents, but currently can't do that...very inconvenient.
    Can you assist?

    Not totally sure about the search issue. A lot depends on how you created the PDF and what is in the datasheets you attached (like are they graphics?). The doc portion should be searchable as long as you used print to the Adobe PDF printer or PDF Maker. For your use, it may be that the print is adequate. However, the result should be searchable (unless maybe you had a form with filled in fields and created the PDF with PDF Maker. I think the form data may be retained in form fields and the fields are not searchable. In that case, a print might be a better procedure. (it would help to know the versions of WORD and Acrobat as well as the exact process you used to create the PDF.)
    If the appended data sheets do not change, then you might try opening the original PDF and then using Replace Pages to replace the file created from the DOC file.

  • Electronic signature while approving documents

    Dear experts,
    I have a client who is validating its SAP B1 implemented system in compliance with FDA 21 CFR part 11 (electronic records and electronic signatures).
    Can any one please describe how SAP business one treats electronic signature while approving documents? because in FDA 21 CFR part 11, it requires electronic signature on approval of certain documents which must contain 'the name of the signer, 'time and date stamp' and the 'meaning (such as approve, review, verify) associated with the signature' plus the traceable record of electronic signatures.
    Furthermore, it also require a 'password' or user id of the signer'  at the time of signing the document. In B1, it does not ask for user id / password at the time of approval and simply rely on login id / password. If user is already logged in, B1 simply allow the approver to approve a document and does not prompt for user id / password again.
    Can we fulfill the signing requirement in SAP Business one? and modify or customize B1 in such a way that it starts prompting for user id / password at the time of approving the document too?
    Any help is highly appreciated>
    Thanks in advance,
    Farhan

    Closing it

Maybe you are looking for