Update amavisd-new on 10.6.8
Hi All,
I am planning to migrate to 10.6.8 server from 10.4.11. I have read a few issues with amavisd and would like to address them before users start driving me nuts. My understanding is that amavisd 2.6.2 or 2.6.4 is installed under OSXS 10.6.8. I have the directions "Updating_amavisd_new_on_OS_X_Server_10_5_Leopard" it says "or Greater" and the referance to the amavisd is amavisd-new-2.6.4.tar.gz. There are 3 stable releaces higher then that at http://www.ijs.si/software/amavisd/
amavisd-new-2.8.0.tar.gz.
amavisd-new-2.7.2.tar.gz.
amavisd-new-2.6.6.tar.gz.
So can I use those update directions for anyone of the 3 options or will it only work with 2.6.6 which I assume is fine with the version of PERL called for.
Hopefully pterobyte is out there since I know you have the answers I need, lol.
Thanks Mike
PS why so few updates at http://osx.topicdesk.com/ for things like this on like 10.6 server and up?
Hi Alex,
Thanks again, I know I can always count on you for sound advise when it comes to my mail server. I was planning on a clean install and then migrate.
You think 10.8.x is ready for primetime? I keep reading about issues with various aspects of the server including email and file services which are the 2 main things I do.
It may be moot since the current hardware is a MacPro 1,1 which is just before the "Mac Pro early 2008" requirement for 10.8. It's a Mac Pro 2 x 2.66Ghz intel 2006.
Thank you again,
Mike
Similar Messages
-
Problems when updating amavisd-new to 2.5.0
Hi the list !
Thanks for the great tips and support we got here. I’m really newbie on mac os x server while it’s now a long time I’m on clients ones.
I wanted to follow topicdesk.com tutorials to update spamassassin and clamav as I saw here the initial conf by Apple isn’t working.
Then, I saw before updating SpamAssassin that I had to update amavisd-new first. So, I begin with this tutorial. Here’s what happened (sorry for the long-long post) :
First installed Xcode 2.4.1.
Everything was fine until the CPAN Perl Module updates, as I always had the “make had returned bad status, install seems impossible” error. Looking for some info on the net, I then understand that you have to install everything Apple suggests as if you don’t, you’ll have later problems whith “make” command (I know, I first wanted to install only gcc that seemed necessary to me, and when nothing works as expected, I had to go back and install everything ...) In fact, the missing BSD SDK was supsected to be the missing thing, but not only. Then, just install everything and this is fine.
Updated the whole asked Perl module without any problem, following the tutorial
Then Reboot the server when asked ; amavisd-new new version 2.5.0 seems OK. Then, the beginning of problems...
My smtp log which is set in debug mode shows lots of error entries such as
May 24 13:11:21 xserve postfix/smtpd[302]: connect from xxxx.adsl.hansenet.de[xxx.xxx.xxx.xxx]
May 24 13:11:22 xserve postfix/smtpd[302]: 0A64A71E1A: client=xxxx.adsl.hansenet.de[xxx.xxx.xxx.xxx]
May 24 13:11:22 xserve postfix/cleanup[349]: 0A64A71E1A: message-id=<890420070524111120@broilingwhelped>
May 24 13:11:22 xserve postfix/qmgr[74]: 0A64A71E1A: from=<[email protected]>, size=1188, nrcpt=1 (queue active)
May 24 13:11:22 xserve postfix/smtp[350]: connect to 127.0.0.1[127.0.0.1]: Connection refused (port 10024)
May 24 13:11:22 xserve postfix/smtp[350]: 0A64A71E1A: to=<[email protected]>, relay=none, delay=1, status=deferred (connect to 127.0.0.1[127.0.0.1]: Connection refused)
May 24 13:11:22 xserve postfix/smtpd[302]: disconnect from xxxx.adsl.hansenet.de[xxx.xxx.xxx.xxx]
Obviously, amavisd-new isn’t running. Then, trying sudo /usr/bin/amavisd and it say there are mistakes in the conf file. BTW, it’s not really obvious trying to migrate settings from the old conf file to the new one :
I don't understand how this old conf settings
@local_domains_acl = ( ".$mydomain" ); # $mydomain and its subdomains
@local_domains_maps = ( 1 );
# @local_domains_acl = qw(); # default is empty, no recipient treated as local
# @local_domains_acl = qw( .example.com );
# @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );
# @local_domains_acl = ( ".$mydomain", '.example.com', 'sub.example.net' );
has to bee changed in the new one way :
@local_domains_maps = ( [".$mydomain"] ); # $mydomain and its subdomains
# @local_domains_maps = (); # default is empty list, no recip. considered local
# @local_domains_maps = # using ACL lookup table
# ( [ ".$mydomain", 'sub.example.net', '.example.com' ] );
# @local_domains_maps = # similar, split list elements on whitespace
# ( [qw( .example.com !host.sub.example.net .sub.example.net )] );
# @local_domains_maps = ( new_RE( qr'[@.]example\.com$'i ) ); # using regexp
# @local_domains_maps = ( read_hash("$MYHOME/local_domains") ); # using hash
# perhaps combined with Postfix: mydestination = /var/amavis/local_domains
# for debugging purposes: dump_hash($local_domains_maps[0]);
Anyway, I doubt this is the (real?) reason to my problems
I correct some of these problems (in fact I forgot to look at amavis.log, but here is what it said) :
May 24 13:53:30 xserve amavis[1072]: INFO: SA version: 3.0.1, 3.000001, no optional modules: Mail::SpamAssassin::SQLBasedAddrList Net::DNS::RR::SOA Net::DNS::RR::NS Net::DNS::RR::MX Net::DNS::RR::A Net::DNS::RR::AAAA Net::DNS::RR::PTR Net::DNS::RR::CNAME Net::DNS::RR::TXT Net::CIDR::Lite Sys::Hostname::Long DBD::mysql IP::Country::Fast Mail::SPF Mail::SPF::Query Mail::SPF::Mech Mail::SPF::Mech::A Mail::SPF::Mech::All Mail::SPF::Mech::Exists Mail::SPF::Mech::IP4 Mail::SPF::Mech::IP6 Mail::SPF::Mech::Include Mail::SPF::Mech::MX Mail::SPF::Mech::PTR Mail::SPF::Mod Mail::SPF::Mod::Exp Mail::SPF::Mod::Redirect Mail::SPF::SenderIPAddrMech Mail::SPF::v1::Record Mail::SPF::v2::Record
May 24 13:53:30 xserve amavis[1072]: SpamControl: init_pre_chroot done
May 24 13:53:30 xserve amavis[1072]: Net::Server: 2007/05/24-13:53:30 Amavis (type Net::Server::PreForkSimple) starting! pid(1072)
May 24 13:53:30 xserve amavis[1072]: Net::Server: Binding to UNIX socket file /var/amavis/amavisd.sock using SOCK_STREAM
May 24 13:53:30 xserve amavis[1072]: Net::Server: Binding to TCP port 10024 on host 127.0.0.1
May 24 13:53:30 xserve amavis[1072]: Net::Server: Setting gid to "82 82"
May 24 13:53:30 xserve amavis[1072]: Net::Server: Setting uid to "82"
May 24 13:53:30 xserve amavis[1072]: Module Amavis::Conf 2.086
May 24 13:53:30 xserve amavis[1072]: Module Archive::Zip 1.18
May 24 13:53:30 xserve amavis[1072]: Module BerkeleyDB 0.26
May 24 13:53:30 xserve amavis[1072]: Module Compress::Zlib 2.004
May 24 13:53:30 xserve amavis[1072]: Module Convert::TNEF 0.17
May 24 13:53:30 xserve amavis[1072]: Module Convert::UUlib 1.08
May 24 13:53:30 xserve amavis[1072]: Module DB_File 1.810
May 24 13:53:30 xserve amavis[1072]: Module Digest::MD5 2.36
May 24 13:53:30 xserve amavis[1072]: Module MIME::Entity 5.420
May 24 13:53:30 xserve amavis[1072]: Module MIME::Parser 5.420
May 24 13:53:30 xserve amavis[1072]: Module MIME::Tools 5.420
May 24 13:53:30 xserve amavis[1072]: Module Mail::Header 1.77
May 24 13:53:30 xserve amavis[1072]: Module Mail::Internet 1.77
May 24 13:53:30 xserve amavis[1072]: Module Mail::SpamAssassin 3.000001
May 24 13:53:30 xserve amavis[1072]: Module Net::Server 0.96
May 24 13:53:30 xserve amavis[1072]: Module Net::Server::PreFork 0.96
May 24 13:53:30 xserve amavis[1072]: Module Net::Server::PreForkSimple 0.96
May 24 13:53:30 xserve amavis[1072]: Module Time::HiRes 1.9707
May 24 13:53:30 xserve amavis[1072]: Module URI 1.35
May 24 13:53:30 xserve amavis[1072]: Module Unix::Syslog 0.99
May 24 13:53:30 xserve amavis[1072]: Amavis::DB code loaded
May 24 13:53:30 xserve amavis[1072]: Amavis::Cache code loaded
May 24 13:53:30 xserve amavis[1072]: SQL base code NOT loaded
May 24 13:53:30 xserve amavis[1072]: SQL::Log code NOT loaded
May 24 13:53:30 xserve amavis[1072]: SQL::Quarantine NOT loaded
May 24 13:53:30 xserve amavis[1072]: Lookup::SQL code NOT loaded
May 24 13:53:30 xserve amavis[1072]: Lookup::LDAP code NOT loaded
May 24 13:53:30 xserve amavis[1072]: AM.PDP-in proto code loaded
May 24 13:53:30 xserve amavis[1072]: SMTP-in proto code loaded
May 24 13:53:30 xserve amavis[1072]: Courier proto code NOT loaded
May 24 13:53:30 xserve amavis[1072]: SMTP-out proto code loaded
May 24 13:53:30 xserve amavis[1072]: Pipe-out proto code NOT loaded
May 24 13:53:30 xserve amavis[1072]: BSMTP-out proto code NOT loaded
May 24 13:53:30 xserve amavis[1072]: Local-out proto code loaded
May 24 13:53:30 xserve amavis[1072]: OS_Fingerprint code NOT loaded
May 24 13:53:30 xserve amavis[1072]: ANTI-VIRUS code loaded
May 24 13:53:30 xserve amavis[1072]: ANTI-SPAM code loaded
May 24 13:53:30 xserve amavis[1072]: ANTI-SPAM-SA code loaded
May 24 13:53:30 xserve amavis[1072]: Unpackers code loaded
May 24 13:53:30 xserve amavis[1072]: Found $file at /usr/bin/file
May 24 13:53:30 xserve amavis[1072]: No $dspam, not using it
May 24 13:53:30 xserve amavis[1072]: No $altermime, not using it
May 24 13:53:30 xserve amavis[1072]: Internal decoder for .mail
May 24 13:53:30 xserve amavis[1072]: Internal decoder for .asc
May 24 13:53:30 xserve amavis[1072]: Internal decoder for .uue
May 24 13:53:30 xserve amavis[1072]: Internal decoder for .hqx
May 24 13:53:30 xserve amavis[1072]: Internal decoder for .ync
May 24 13:53:30 xserve amavis[1072]: No decoder for .F tried: unfreeze, freeze -d, melt, fcat
May 24 13:53:30 xserve amavis[1072]: Found decoder for .Z at /usr/bin/uncompress
May 24 13:53:30 xserve amavis[1072]: Found decoder for .gz at /usr/bin/gzip -d
May 24 13:53:30 xserve amavis[1072]: Internal decoder for .gz (backup, not used)
May 24 13:53:30 xserve amavis[1072]: Found decoder for .bz2 at /usr/bin/bzip2 -d
May 24 13:53:30 xserve amavis[1072]: No decoder for .lzo tried: lzop -d
May 24 13:53:30 xserve amavis[1072]: No decoder for .rpm tried: rpm2cpio.pl, rpm2cpio
May 24 13:53:30 xserve amavis[1072]: Found decoder for .cpio at /bin/pax
May 24 13:53:30 xserve amavis[1072]: Found decoder for .tar at /bin/pax
May 24 13:53:30 xserve amavis[1072]: Found decoder for .deb at /usr/bin/ar
May 24 13:53:30 xserve amavis[1072]: Internal decoder for .zip
May 24 13:53:30 xserve amavis[1072]: No decoder for .7z tried: 7zr, 7za, 7z
May 24 13:53:30 xserve amavis[1072]: No decoder for .rar tried: rar, unrar
May 24 13:53:30 xserve amavis[1072]: No decoder for .arj tried: arj, unarj
May 24 13:53:30 xserve amavis[1072]: No decoder for .arc tried: nomarch, arc
May 24 13:53:30 xserve amavis[1072]: No decoder for .zoo tried: zoo, unzoo
May 24 13:53:30 xserve amavis[1072]: No decoder for .lha tried: lha
May 24 13:53:30 xserve amavis[1072]: No decoder for .cab tried: cabextract
May 24 13:53:30 xserve amavis[1072]: No decoder for .tnef tried: tnef
May 24 13:53:30 xserve amavis[1072]: Internal decoder for .tnef
May 24 13:53:30 xserve amavis[1072]: No decoder for .exe tried: rar, unrar; lha; arj, unarj
May 24 13:53:30 xserve amavis[1072]: Found secondary av scanner ClamAV-clamscan at /usr/bin/clamscan
May 24 13:53:30 xserve amavis[1072]: (!!)TROUBLE in pre_loop_hook: Please create an empty directory /var/amavis/db to hold a database (config variable $db_home)
I created the directory, then it says
May 24 13:58:12 xserve amavis[1133]: (!!)TROUBLE in pre_loop_hook: db_home directory is not writable: /var/amavis/db at /usr/bin/amavisd line 7783.
I changed CHMOD to 777 (just see later to be more restricitve)
And then it seems OK
May 24 14:11:49 localhost /usr/bin/amavisd[44]: starting. /usr/bin/amavisd at localhost amavisd-new-2.2.0 (20041102), Unicode aware
May 24 14:11:49 localhost /usr/bin/amavisd[44]: user=, EUID: 0 (0); group=, EGID: 0 0 (0 0)
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Perl version 5.008006
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Net::Server: 2007/05/24-14:11:49 Amavis (type Net::Server::PreForkSimple) starting! pid(44)
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Net::Server: Binding to UNIX socket file /var/amavis/amavisd.sock using SOCK_STREAM
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Net::Server: Binding to TCP port 10024 on host 127.0.0.1
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Net::Server: Setting gid to "82 82"
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Net::Server: Setting uid to "82"
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Amavis::Conf 2.033
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Archive::Tar 1.22
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Archive::Zip 1.18
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Compress::Zlib 2.004
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Convert::TNEF 0.17
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Convert::UUlib 1.08
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module DB_File 1.810
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module MIME::Entity 5.420
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module MIME::Parser 5.420
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module MIME::Tools 5.420
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Mail::Header 1.77
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Mail::Internet 1.77
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Mail::SpamAssassin 3.000001
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Net::Cmd 2.26
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Net::SMTP 2.29
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Net::Server 0.96
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Time::HiRes 1.9707
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Module Unix::Syslog 0.99
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Amavis::DB code NOT loaded
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Amavis::Cache code NOT loaded
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Lookup::SQL code NOT loaded
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Lookup::LDAP code NOT loaded
May 24 14:11:49 localhost /usr/bin/amavisd[44]: AMCL-in protocol code loaded
May 24 14:11:49 localhost /usr/bin/amavisd[44]: SMTP-in protocol code loaded
May 24 14:11:49 localhost /usr/bin/amavisd[44]: ANTI-VIRUS code loaded
May 24 14:11:49 localhost /usr/bin/amavisd[44]: ANTI-SPAM code loaded
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Unpackers code loaded
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Found $file at /usr/bin/file
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $arc, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Found $gzip at /usr/bin/gzip
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Found $bzip2 at /usr/bin/bzip2
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $lzop, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $lha, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $unarj, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Found $uncompress at /usr/bin/uncompress
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $unfreeze, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $unrar, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $zoo, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Found $cpio at /usr/bin/cpio
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $ar, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $rpm2cpio, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $cabextract, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No $dspam, not using it
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: KasperskyLab AntiViral Toolkit Pro (AVP)
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: KasperskyLab AVPDaemonClient
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: H+BEDV AntiVir or CentralCommand Vexira Antivirus
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: Command AntiVirus for Linux
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: Symantec CarrierScan via Symantec CommandLineScanner
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: DrWeb Antivirus for Linux/FreeBSD/Solaris
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: F-Secure Antivirus
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: CAI InoculateIT
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: MkS_Vir for Linux (beta)
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: MkS_Vir daemon
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: ESET Software NOD32
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: ESET Software NOD32 - Client/Server Version
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: Norman Virus Control v5 / Linux
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: Panda Antivirus for Linux
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: NAI McAfee AntiVirus (uvscan)
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: VirusBuster (Client + Daemon)
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: CyberSoft VFind
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: Ikarus AntiVirus for Linux
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No primary av scanner: BitDefender
May 24 14:11:49 localhost /usr/bin/amavisd[44]: Found secondary av scanner Clam Antivirus - clamscan at /usr/bin/clamscan
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No secondary av scanner: FRISK F-Prot Antivirus
May 24 14:11:49 localhost /usr/bin/amavisd[44]: No secondary av scanner: Trend Micro FileScanner
May 24 14:11:49 localhost /usr/bin/amavisd[44]: SpamControl: initializing Mail::SpamAssassin
May 24 14:11:52 localhost /usr/bin/amavisd[44]: SpamControl: done
But in fact there's still a problem :
May 24 14:12:22 localhost /usr/bin/amavisd[219]: (00219-01) ESMTP::10024 /var/amavis/amavis-20070524T141222-00219: <p.estxxxx@xxxxxxx> -> <pacvolley@ xxxxxxx > Received: SIZE=5929 from xserve.xxxxx ([127.0.0.1]) by localhost (localhost [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 00219-01 for <pacvolley@ xxxxxxx>; Thu, 24 May 2007 14:12:22 +0200 (CEST)
May 24 14:12:22 localhost /usr/bin/amavisd[219]: (00219-01) body hash: 05f429e5a692012d98323c55a540b730
May 24 14:12:22 localhost /usr/bin/amavisd[219]: (00219-01) Checking: [82.241.222.174] <p.estxxx@xxxxx> -> <pacvolley@xxxxx>
May 24 14:12:22 localhost /usr/bin/amavisd[219]: (00219-01) p003 1 Content-Type: multipart/alternative
May 24 14:12:22 localhost /usr/bin/amavisd[219]: (00219-01) p001 1/1 Content-Type: text/plain, size: 394 B, name:
May 24 14:12:22 localhost /usr/bin/amavisd[219]: (00219-01) p002 1/2 Content-Type: text/html, size: 3962 B, name:
May 24 14:12:22 localhost /usr/bin/amavisd[302]: (00219-01) run_command: child process [302]: Can't close main::stdin: Bad file descriptor at /usr/bin/amavisd line 1589.\n
May 24 14:12:22 localhost /usr/bin/amavisd[302]: (00219-01) SMTP shutdown: tempdir is being removed: /var/amavis/amavis-20070524T141222-00219
May 24 14:12:23 localhost /usr/bin/amavisd[219]: (00219-01) TROUBLE in check_mail: mime_decode-1 FAILED: parsing file(1) results - missing last 2 results at (eval 40) line 150.
May 24 14:12:23 localhost /usr/bin/amavisd[219]: (00219-01) PRESERVING EVIDENCE in /var/amavis/amavis-20070524T141222-00219
May 24 14:12:23 localhost /usr/bin/amavisd[219]: (00219-01) TIMING [total 284 ms] - SMTP EHLO: 21 (7%), SMTP pre-MAIL: 3 (1%), mkdir tempdir: 1 (0%), create email.txt: 2 (1%), SMTP pre-DATA-flush: 8 (3%), SMTP DATA: 5 (2%), body_hash: 2 (1%), mkdir parts: 3 (1%), mime_decode: 57 (20%), rundown: 181 (64%)
May 24 14:12:23 localhost /usr/bin/amavisd[219]: (00219-01) TROUBLE in process_request: Error writing a SMTP response to the socket: Broken pipe at (eval 36) line 760, <GEN3> line 208.
May 24 14:12:23 localhost /usr/bin/amavisd[219]: (00219-01) Requesting process rundown after fatal error
May 24 14:12:23 localhost /usr/bin/amavisd[219]: (00219-01) load: 100 %, total idle 0.001 s, busy 0.287 s
May 24 14:12:23 localhost /usr/bin/amavisd[219]: (00219-01) SMTP shutdown: Error writing a SMTP response to the socket: Bad file descriptor at (eval 36) line 760.\n
And in the mail log I get corresponding errors such as :
May 24 14:30:20 xserve postfix/smtpd[626]: connect from xxxxxx.club-internet.fr[xxx.xxx.xxx.xxx]
May 24 14:30:20 xserve postfix/smtpd[626]: 5580872531: client= xxxxxx.club-internet.fr[xxx.xxx.xxx.xxx]
May 24 14:30:20 xserve postfix/cleanup[452]: 5580872531: message-id=<00e301c79dff$49859120$0100a8c0@pcservice>
May 24 14:30:20 xserve postfix/smtpd[626]: disconnect from xxxxxx.club-internet.fr[xxx.xxx.xxx.xxx]
May 24 14:30:20 xserve postfix/qmgr[64]: 5580872531: from=<[email protected]>, size=95594, nrcpt=1 (queue active)
May 24 14:30:20 xserve postfix/smtp[464]: 5580872531: to=<sjoly@ xxxxxx.com>, relay=127.0.0.1[127.0.0.1], delay=0, status=deferred (host 127.0.0.1[127.0.0.1] said: 421 4.3.2 Service shutting down, closing channel (in reply to end of DATA command))
I first thought mails were lost, and obviously as it won’t be so easy to fix alone without any help (and time is running loosing mails), I decided to come back to the old amavisd-new version, restoring /usr/bin/amavis and amavis.conf, and rebooting computer.
Then, another problem with Perl modules that were updated so that old amavis seemed also not working. I decided to replace /Library/Perl and System/Library/Perl with new ones from a clean fresh install on my local server. Rebooted, and seems to be OK as before. Then looked for Postfix and understood than flushing will force deferred mails to be processed.
Anyway, all is to be done again. If anybody here as an idea of what's going wrong, I'll be glad to learn ...
Mac OS X (10.4.9)well, there you have it – a classical if then loop.
seems i'm still stuck somewhere in the middle of the amavisd.conf nightmare. had amavisd-new 2.4.5 / spamassassin 3.1.8 up and running after a real nightmare (which had to do with daemonize=1).
after i tried to get up-to-date with amavisd-new 2.5.1 and spamassassin 3.2.1 i saw the same problems (see below) again, while launchd tried to get amavisd started.
Jun 15 05:14:11 mail launchd: org.amavis.amavisd: exited with exit code: 2
Jun 15 05:14:11 mail launchd: org.amavis.amavisd: respawning too quickly! throttling
Jun 15 05:14:11 mail launchd: org.amavis.amavisd: 9 more failures without living at least 60 seconds will cause job removal
Jun 15 05:14:11 mail launchd: org.amavis.amavisd: will restart in 10 seconds
remembering the previous troubles, i double checked all things, which could be set wrong (daemonize, etc.) and all was well. tried a second install and all to no success.
later i had the idea, it might be the new amavisd.conf, which troubles (why ever) the startup. so i used the v2.4.5 one and lo and behold, it worked. but why? what is so strange/new/different in 2.5.1, that the startup of amavisd gets broken?
now i read, that they changed a bunch of stuff and i certainly would be using the newer versions conf file, but it seems i don't get it right configured. i'm on the latest updated 10.4.9 server with all fixes installed. every service is working, mail gets in/out and gets even tagged.
well, i didn't do the setup with the 2 users junkmail/nojunkmail yet. is it really necessary to set them up as local users? can't they be handled as every other user which has mail enabled via wgm?
anyone can help me here? thx.
Various Mac OS X (10.4.9) Mac OS X Server (10.4.9) -
Updated amavisd-new fails to compile
I am have followed the directions to a 'T' and have no errors on the install. CPAN checks out everything to be updated. I still get the error below -
xserve1:~ root# /usr/bin/amavisd -V
ERROR: MISSING REQUIRED BASIC MODULES:
Compress::Zlib
BEGIN failed--compilation aborted at /usr/bin/amavisd line 171.
And I have double checked in CPAN to make sure that the module in question is installed and updated and here is the output from CPAN -
cpan[1]> o conf prerequisites_policy ask
prerequisites_policy [ask]
Please use 'o conf commit' to make the config permanent!
cpan[2]> o conf commit
commit: wrote '/usr/local/lib/perl5/5.8.6/CPAN/Config.pm'
cpan[3]> install Compress::Zlib
CPAN: Storable loaded ok (v2.13)
Going to read /.cpan/Metadata
Database was generated on Wed, 29 Aug 2007 18:36:47 GMT
CPAN: YAML loaded ok (v0.62)
Going to read /.cpan/build/
............................................................................DONE
Found 13 old builds, restored the state of 13
Compress::Zlib is up to date (2.005).
cpan[4]> install Compress::Zlib
Compress::Zlib is up to date (2.005).
Now I know that I have had issues with a PERL update in the past. Not sure how this would effect this issue.
Thanks in advance for anyone's help on this issue.
DonI have somehow corrupted my copy of PERL. So when I do updates it causes havoc. There were PERL modules that would NOT update but were needed for the amavisd update. So I had my friend Pterobyte take a look at it and he had to do a work around to get PERL patched enough for the updates to install. So I really had no way to do this on my own. I had to get external help.
Hope this points you in the right direction.
Message was edited by: donrjuan -
Amavisd-new 2.4 seems to have hosed my mail server
Used BuildSmart this morning to update ClamAV and amavisd-new and now all mail is stuck in the queue with this message:
host 127.0.0.1[127.0.0.1] said: 451 4.5.0 Error in processing, id=01286-15, partsdecodeext FAILED: parsing file(1
Killing the process does not work. I have tried to replace amavisd and amavisd.conf from a backup to no avail...
Help, please!Here you go. Thanks for your help.
03 1 Content-Type: multipart/mixed
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-05) p001 1/1 Content-Type: text/plain, size: 27 B, name:
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-05) p002 1/2 Content-Type: application/plain, size: 1256 B, name: 5860.3668.csv
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[567]: (00559-05) run_command: child process [567]: Error closing main::stdin: Bad file descriptor at /usr/bin/amavisd line 1881.\n
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-05) TROUBLE in check_mail: partsdecodeext FAILED: parsing file(1) results - missing last 2 results at (eval 43) line 154.
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-05) PRESERVING EVIDENCE in /var/amavis/tmp/amavis-20060407T164530-00559
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-05) TIMING [total 200 ms] - SMTP EHLO: 8 (4%)4, SMTP pre-MAIL: 2 (1%)5, mkdir tempdir: 1 (1%)6, create email.txt: 1 (0%)6, SMTP pre-DATA-flush: 6 (3%)9, SMTP DATA: 102 (51%)60, body_digest: 3 (1%)62, genmailid: 1 (1%)62, mkdir parts: 1 (1%)63, mime_decode: 40 (20%)83, rundown: 34 (17%)100
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-06) ESMTP::10024 /var/amavis/tmp/amavis-20060407T164530-00559: <[email protected]> -> <[email protected]>,<[email protected]> Received: SIZE=13463 from mail.smartexhibits.com ([127.0.0.1]) by localhost (mail.smartexhibits.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 00559-06; Fri, 7 Apr 2006 16:45:30 -0500 (CDT)
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-06) Checking: LWDblprK+XdI [66.116.100.195] <[email protected]> -> <[email protected]>,<[email protected]>
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-06) p001 1 Content-Type: text/html, size: 8824 B, name:
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[568]: (00559-06) run_command: child process [568]: Error closing main::stdin: Bad file descriptor at /usr/bin/amavisd line 1881.\n
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-06) TROUBLE in check_mail: partsdecodeext FAILED: parsing file(1) results - missing last 1 results at (eval 43) line 154.
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-06) PRESERVING EVIDENCE in /var/amavis/tmp/amavis-20060407T164530-00559
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-06) TIMING [total 369 ms] - SMTP EHLO: 7 (2%)2, SMTP pre-MAIL: 2 (1%)3, create email.txt: 2 (0%)3, SMTP pre-DATA-flush: 5 (1%)4, SMTP DATA: 290 (79%)83, body_digest: 3 (1%)84, genmailid: 1 (0%)84, mime_decode: 26 (7%)91, rundown: 33 (9%)100
Apr 7 16:45:30 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-07) ESMTP::10024 /var/amavis/tmp/amavis-20060407T164530-00559: <[email protected]> -> <[email protected]>,<[email protected]> Received: SIZE=3297 from mail.smartexhibits.com ([127.0.0.1]) by localhost (mail.smartexhibits.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 00559-07; Fri, 7 Apr 2006 16:45:30 -0500 (CDT)
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-07) Checking: p9yuJ2GHgBkg [192.168.254.4] <[email protected]> -> <[email protected]>,<[email protected]>
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-07) p004 1 Content-Type: multipart/alternative
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-07) p001 1/1 Content-Type: text/plain, size: 566 B, name:
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-07) p002 1/2 Content-Type: text/html, size: 1123 B, name:
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[569]: (00559-07) run_command: child process [569]: Error closing main::stdin: Bad file descriptor at /usr/bin/amavisd line 1881.\n
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-07) TROUBLE in check_mail: partsdecodeext FAILED: parsing file(1) results - missing last 3 results at (eval 43) line 154.
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-07) PRESERVING EVIDENCE in /var/amavis/tmp/amavis-20060407T164530-00559
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-07) TIMING [total 199 ms] - SMTP EHLO: 7 (4%)4, SMTP pre-MAIL: 2 (1%)5, create email.txt: 1 (1%)6, SMTP pre-DATA-flush: 5 (2%)8, SMTP DATA: 103 (52%)60, body_digest: 2 (1%)61, genmailid: 1 (1%)61, mime_decode: 43 (22%)83, rundown: 34 (17%)100
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-08) ESMTP::10024 /var/amavis/tmp/amavis-20060407T164531-00559: <[email protected]> -> <[email protected]>,<[email protected]> Received: SIZE=4289 BODY=8BITMIME from mail.smartexhibits.com ([127.0.0.1]) by localhost (mail.smartexhibits.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 00559-08; Fri, 7 Apr 2006 16:45:31 -0500 (CDT)
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[556]: (00556-04) Checking: XWoJMhUAX+qN [64.203.188.4] <[email protected]> -> <[email protected]>,<[email protected]>
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-08) Checking: rY5f9qjjBY7Q [66.116.100.195] <[email protected]> -> <[email protected]>,<[email protected]>
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-08) p003 1 Content-Type: multipart/mixed
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-08) p001 1/1 Content-Type: text/plain, size: 27 B, name:
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-08) p002 1/2 Content-Type: application/plain, size: 1848 B, name: 5865.3673.csv
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[570]: (00559-08) run_command: child process [570]: Error closing main::stdin: Bad file descriptor at /usr/bin/amavisd line 1881.\n
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-08) TROUBLE in check_mail: partsdecodeext FAILED: parsing file(1) results - missing last 2 results at (eval 43) line 154.
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-08) PRESERVING EVIDENCE in /var/amavis/tmp/amavis-20060407T164531-00559
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-08) TIMING [total 384 ms] - SMTP EHLO: 8 (2%)2, SMTP pre-MAIL: 2 (1%)3, mkdir tempdir: 1 (0%)3, create email.txt: 1 (0%)3, SMTP pre-DATA-flush: 6 (2%)5, SMTP DATA: 281 (73%)78, body_digest: 3 (1%)79, genmailid: 1 (0%)79, mkdir parts: 1 (0%)79, mime_decode: 40 (10%)90, rundown: 39 (10%)100
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-09) ESMTP::10024 /var/amavis/tmp/amavis-20060407T164531-00559: <[email protected]> -> <[email protected]>,<[email protected]> Received: SIZE=3899 from mail.smartexhibits.com ([127.0.0.1]) by localhost (mail.smartexhibits.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 00559-09; Fri, 7 Apr 2006 16:45:31 -0500 (CDT)
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-09) ESMTP ABORTING: Connection broken during DATA: Connection reset by peer at (eval 40) line 588, <GEN43> chunk 7.
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-09) TIMING [total 70 ms] - SMTP EHLO: 12 (18%)18, SMTP pre-MAIL: 3 (4%)22, create email.txt: 2 (2%)24, SMTP pre-DATA-flush: 9 (12%)37, unlink-2-files: 43 (62%)98, rundown: 1 (2%)100
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-09) ESMTP: NOTICE: ABORTING the session: Connection broken during DATA: Connection reset by peer at (eval 40) line 588, <GEN43> chunk 7.
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-09) TROUBLE in process_request: Error writing a SMTP response to the socket: Broken pipe at (eval 40) line 813.
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[559]: (00559-09) Requesting process rundown after fatal error
Apr 7 16:45:31 mail.smartexhibits.com /usr/bin/amavisd[576]: TIMING [total 28 ms] - bdb-open: 28 (100%)100, rundown: 0 (0%)100
Apr 7 16:45:32 mail.smartexhibits.com /usr/bin/amavisd[556]: (00556-04) p003 1 Content-Type: multipart/mixed
Apr 7 16:45:32 mail.smartexhibits.com /usr/bin/amavisd[556]: (00556-04) p001 1/1 Content-Type: text/plain, size: 904 B, name:
Apr 7 16:45:32 mail.smartexhibits.com /usr/bin/amavisd[556]: (00556-04) p002 1/2 Content-Type: application/pdf, size: 3025036 B, name: DHHI_7226final50%.pdf
Apr 7 16:45:32 mail.smartexhibits.com /usr/bin/amavisd[577]: (00556-04) run_command: child process [577]: Error closing main::stdin: Bad file descriptor at /usr/bin/amavisd line 1881.\n
Apr 7 16:45:32 mail.smartexhibits.com /usr/bin/amavisd[556]: (00556-04) TROUBLE in check_mail: partsdecodeext FAILED: parsing file(1) results - missing last 2 results at (eval 43) line 154.
Apr 7 16:45:32 mail.smartexhibits.com /usr/bin/amavisd[556]: (00556-04) PRESERVING EVIDENCE in /var/amavis/tmp/amavis-20060407T164530-00556
Apr 7 16:45:33 mail.smartexhibits.com /usr/bin/amavisd[556]: (00556-04) TIMING [total 2943 ms] - SMTP EHLO: 6 (0%)0, SMTP pre-MAIL: 2 (0%)0, mkdir tempdir: 1 (0%)0, create email.txt: 1 (0%)0, SMTP pre-DATA-flush: 5 (0%)1, SMTP DATA: 1055 (36%)36, body_digest: 135 (5%)41, genmailid: 1 (0%)41, mkdir parts: 1 (0%)41, mime_decode: 950 (32%)73, rundown: 785 (27%)100
Apr 7 16:45:33 mail.smartexhibits.com /usr/bin/amavisd[556]: (00556-04) TROUBLE in process_request: Error writing a SMTP response to the socket: Broken pipe at (eval 40) line 813, <GEN20> line 53151.
Apr 7 16:45:33 mail.smartexhibits.com /usr/bin/amavisd[556]: (00556-04) Requesting process rundown after fatal error
Apr 7 16:45:33 mail.smartexhibits.com /usr/bin/amavisd[578]: TIMING [total 27 ms] - bdb-open: 27 (100%)100, rundown: 0 (0%)100
Apr 7 16:45:34 mail.smartexhibits.com /usr/bin/amavisd[492]: Net::Server: 2006/04/07-16:45:34 Server closing!
Xserve Dual 1 GHz G4 Mac OS X (10.4.1) -
updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??
I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration? -
How to refresh the data in a container and to update the new data
Hi,
I have created a Module Pool Program in which i have two containers to display the long text.
Initially this container is filled and based on some condition i want to update the text in the same conatiner.
I am using the below two classes to do all this.
cl_gui_textedit,
cl_gui_custom_container,
Could someone help me how to remove the long text in the container and update the new long text.
I am getting the new long text but not able display it in the same container. Please someone help me how to refresh and update the container.
Thanks in advance.Hi
Try this.
IF cl_gui_textedit IS INITIAL.
create control container
CREATE OBJECT cl_gui_custom_container
EXPORTING
container_name = 'Container Name''
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
create text_edit control
CREATE OBJECT cl_gui_textedit
EXPORTING
parent = cl_gui_custom_container
wordwrap_mode = cl_gui_textedit=>wordwrap_at_windowborder
wordwrap_to_linebreak_mode = cl_gui_textedit=>false
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5.
ENDIF.
*--use method to set the text
CALL METHOD cl_text_edit->set_text_as_stream
EXPORTING
text = t_lines ( Internal table with long text).
EXCEPTIONS
error_dp = 1
error_dp_create = 2
OTHERS = 3.
regards,
Raghu. -
Update (0 new / 0 changed) Warning received Message Missing Update Finished
The FULL load is running for long time and after some time it fails with processing Overdue. ( It is loading directly into datatargets no PSA as this is Daily FULL load to cube, deleting the previous request) The job overview is successfully finished in source system.
While load running in details tab under processing..
1)Data Package 6 ( 7407 Records ) : Missing messages -->
2)Update ( 0 new / 0 changed ) : Warning received
3)Message Missing: Update Finished for Cube
4)Processing end : Missing messages .
When clicked on helpnode on each step:-
1)Data Package
A data packet is either sent with transfer method IDoc or PSA to BI. You have the option here of viewing the data received and of editing it where necessary, of posting the data packet in simulation, and of canceling in simulation, and, if it has not yet been posted successfully, of starting the update manually.
2)Update
See also Data packet processing steps
By this the persistent saving of data is understood in its final target object
3)Processing Message
see also Data Packet Processing Steps
Single message from the processing of a data packet. Some messages contain references to application logs or other requests. The monitor then allows corresponding jumps.
4)Processing End
see also Data packet processing steps
If the processing of a data packet has been finished then any error messages for each process in the step up until this point are delivered to the monitor and to the called program (in the case of transferring by IDoc thus to the IDoc management). If no errors arose then a success message is logged per process.
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.Hi
Try to transport the request again and check...
Perform the consistency test with 'RSRV'...
Check notes in this link if they could help u....UNCAUGHT_EXCEPTION
Regards
Gaurav -
please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
"We're sorry, we are unable to continue with your activation at this time."You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.
-
I updated to new ios and now it is not syncing properly. New songs are not showing up on the ipod display but when I view the device on my computer, they are in the playlist but there is a dashed circle beside the missing songs. It previously synced perfectly before the IOS update. How can i revert back to the previous installed version?
Downgrading the iOS is not supported by Apple.
Try:
Re: What does the gray dotted circle in iTunes mean?
https://discussions.apple.com/thread/4676111?tstart=0\\
Dotted circles next to songs, won't sync, red circle with square? -
Since the latest IOS update, my new iPad Air is freezing and glitching badly. Typing is delayed.
Since the latest IOS update, my new iPad Air is freezing and glitching badly. Typing is delayed.
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Cheers, Tom -
I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result
What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues -
How do I change icloud email when my apple ID has been updated to new email? When I try to delete icloud account (in settings-icloud-delete account) I have to put in the password for the apple ID of my old email address, which is no longer my apple ID, and it says username or password is invalid (I'm guessing because that is no longer my apple ID).
You will wait for the rest of your life. You need to fix it; no one else will. To turn off "Find my iPhone" and its associated Activation Lock you need the Apple ID and password that were used to turn it on. If you know the Apple ID you can contact Apple Account Security and have them reset the password (after you prove you are the rightful owner of that Apple ID). see: http://support.apple.com/kb/HT5699.
If you don't know the Apple ID the phone is permanently unusable. -
Since updating to new firefox I have lost a very helpful tool. Before, when I clicked on a website to visit, the color of the print would change from blue to purple to indicate that I had visited that site. Now it does not do that so it is difficult to keep track of what sites I have visited and what sites I haven't when looking down the list of possible sites to visit.
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
Make sure that the History is enabled:
* Tools > Options > Privacy > Firefox will: "Use custom settings for history" > Remember my browsing history
See also http://blog.mozilla.com/security/2010/03/31/plugging-the-css-history-leak/ -
how do I STOP this from updating to NEW VERSION? I am getting tired of uninstalling and reinstalling every 10 uses. Ver.10 is Garbage!!!!!
WHEN it decides to run it does NOT member passwords.
And besides, if I WANTED NEW I would DOWNLOAD NEW!!!
''[Profanity removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.
Do a clean reinstall and be sure to remove the Firefox program folder.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* [/questions/826858] -
I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!
You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store
Maybe you are looking for
-
FF not running (not listed in Task Manager) but get message it is (and Profile missing)?
WIN7 (86). Can't open FF. Get message it's running, but it isn't (not listed in Task Manager showing all processes). Tried to access my Profile, but search was unsuccessful.
-
I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2) To make final decision I need few information . These are: 1. May I use Boot Camp or simil
-
Print delivery note with VL01N
Hi, The delivery note prints only when I post the good issue. But I would like to print it automatically when I use the VL01N I delete the routine "1" in NACE for my condition type LD00 (If goods issue has been posted for the delivery, then the out
-
Can I stop Update Rollups from downloading to WSUS?
Previous we had Update Rollups configured and now we'd like them gone. Originally the goal was to stop Silverlight but now we want all the Update Rollups to not be present in the WSUS server. Here is what I tried based on results O found here via Goo
-
Hi all! I'm trying to deploy a J2ee example in an NT workstation, I've installed j2sdk 1.3 and j2sdkee1.3. I start the server and launch the deplotool, I configure a j2ee example and try to deploy but the next error appear: "There was a deployment er