Update apps before or after upgrade?

I've got numerous updates waiting. So should I update before or after I upgrade to IO5? Your thoughts?

OK, I'l answer/update my question. Yesterday, I backed up my iPad 2 and then downloaded/installed the new IO5 (as per directions via iTunes). That took most of the morning. Then I updated my apps. Most seem to work fine. However, one app (FreeBooks) quit/exited every time I tried to use it, and my library was gone. So I just ended up deleting the app. Then I reinstalled it and re-downloaded my library. Bit of a pain but no big deal. So my upgrade went pretty well. I'm loving the new four-finger gestures so I don't have to use the Home button as much.

Similar Messages

Unable to update apps on 4s after upgrading to iOS 8.1

Hi,
I am unable to update apps on 4s app store after upgrading to iOS 8.1. signed in on app store & icloud still app upgrading will show circle running but wouldn't start upgrading. location service OFF, tried after changing to location service ON but still won't upgrade. what should be the issue? any correct way to update apps. I have been using for long, never had issue with app store on previous iOS migrations. anyone here can help please.

Hi there Sam R 12,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
-Griff W.

Do I need to update Bootcamp 3.3 after upgrading from Snow Leopard to Mountain Lion?

Do I need to update Bootcamp 3.3 after upgrading directly from Snow Leopard to Mountain Lion? If so, what is the recommended version for my machine?
Other pros and cons we should consider? Not sure what is considered best practice.
We have a mid-2011 iMac (12,1) running Win7 64bit. Concerned about firmware updates not being compatible with Bootcamp 3.3. Firmware updates forThunderbolt port were part of post-Mountain Lion updater install. Not sure what other firmware/boot changes might have been applied to support the new recovery partition, for example. Will the 3.3 windows control panel still work safely?
Win7 still boots OK, at least for now. Backup is current.
I'd like to get the entire machine current again. Bootcamp 5.0 didn't want to download (appeared to hang writing to my external drive, which is otherwise fine). Bootcamp 4.1 refused to install on Win7 (claimed it wasn't for my machine, so I aborted. Downloaded from apple support page directly).
I've searched the forums for this specific question - I see plenty of info for upgrading Bootcamp 4 to 5, but nothing for 3 to 5.
Thanks much in advance,
-b

Appreciate the quick response.
There are basically 2 schools of thought here:
- If it ain't broke, don't fix it.
- Don't fall off the upgrade cycle (apply patches whether you have an issue or not in order to ward off trouble before it happens).
I don't have a specific issue that I'm chasing on the Win7 side right now. I'm attempting to address having fallen off the upgrade cycle by staying on Snow Leopard too long.
I appreciate that the Win7 side under bootcamp is its own thing (upgrades to Mac OS don't cross over or effect the bootcamp partition) - except where firmware upgrades coming out of Mountain Lion change the hardware interface to Win7. Hence my questions.
-b

Many apps not working after upgrade

I have a lot of apps not working after upgrade even apple's remote, splash id etc... Anyone else or is it just me?

I had trouble with MPR, but since it's free, I just deleted it and reloaded it directly from the App store onto the phone. It had an upgrade, too, that must have clashed with the 2.2 upgrade. Once I did the download, it was fine.

Remove Windows partition before or after upgrading to Leopord

Hi,
I have been using boot camp beta for some time. A short time ago, the Windows partition became unusable because the partition was too small. It appears the least risky approach would be to restore the disk to a OS X only system then re-install Windows on a larger partition. I have the Leopard upgrade disk. I have also read article 306805 which involves rolling back the computer clock.
My question is would it be safer to remove the Windows partition before or after upgrading to Leopard?

Backup and reformat your drive with Leopard. Then install both. You can use Migration Assistant to restore your files and settings.

IPod App quits unexpectedly after upgrade to OS4...?

Does anyone know what to do about this:
iPod App starts up and stays on screen for 2-3 seconds and then just quits. Also my podcasts from previously are no longer there - that's ok with me but may not be a good sign...?
Thanks for any advise!

Lack of responses tell me no solution in all those bright minds out there... yet. Another question: Am I the only one suffering this. If so, then I will try to fiddle or rest the whole thing... Any ideas before I try anything too drastic?.... and please let me know if any of you are having the same issue. THANKS!
P.S. By the way the recent updates to iTunes/iPod with IOS4 and Snowleapard/itunes have taken iTunes a quantum leap forward for those looking to use it for Classical music. And using the remote star rating system after upgrading to iOS4 is nothing short of fantastic (however trivial the change may seem).

App Launching Unresponsive After Upgrading to Snow Leopard

For reasons I do not quite understand, launching any app, and doing many things within them (basically, instantiating any process) is extremely slow after upgrading to Snow Leopard. For instance, opening a new window in Terminal takes a full 22 seconds (I've timed it) to go from "login" to the zsh prompt. Before, it was instantaneous. There is nearly nothing installed on this computer other than the bare essentials and some documents.
This is obviously very frustrating and detrimental to my productivity. Here is what I've tried:
- Reinstalling from scratch (I've now tried this two times). First, I backed up my home directory with SuperDuper and manually copied everything over. Everything was fixed, for about two days, and then it started doing the same thing again. Then, I cloned the entire disk with SuperDuper and restored from it. Again, everything was fixed for a little while and then I had the same problem again.
- Most recently, I tried "Verify disk" in Disk Utility. This returned that there were errors (an "invalid directory count"). Therefore I rebooted into the installation disc and ran "Repair Disk", which outputted that the disk was repaired successfully. However, I rebooted back and now have the same problem.
Does anyone have any suggestions as to what is going wrong? My first thought was that perhaps the hard drive is failing, but I've dual-booted Linux on another partition and it works fine.
I am very confused. How can I fix this?

Have you updated iTunes?

Apps keep crashing after upgrade to ios 7 ipad2

After upgrading to ios 7 most of my apps keep crashing on ipad2 why? Do i need to re-install them? Please help

i am having the same experience (as well as several other problems) since installing iOS7 on my iPad2. The apps briefly appear to open when I tap their icons, but then disappear. double tapping the Home key to bring up the multi-tasking view idicates that the apps are running in the background but, I cannot access them.
This fiasco began because I was unable to login to my One-to-One account after the iOS7 update. I spent 4 hrs on the phone last night, with 4 different people from Apple support, restoring the iPad to factory settings & then restoring the image from my iCloud backup, only to end up with the situation described above. And I still can't login to my One-to-One account, plus I amnow also unable to access the iTunes store. I am sure there are other problems that I have yet to discover.
This has been such a "Windows" experience that I find myself wondering if Apple truly has lost its mojo & mystique. Are their pretty products worth their premium prices? More importantly, are they worth the frustration I experience, & the time that lost from my life, in trying to resolve problems with their"improvements". If asked today, my answer would be a very loud & resounding "NO"!!!!!

App Store problems after upgrading to Mavericks

after upgrading to mavericks, i can't update my apps via the app store. I see there are updates, but it won't let me get to the update pane. it stays on the featured. i can't get to top charts, categories, or purchases either.

Those reports are sent to Apple developers for their perusal. You will not receive a reply.
Check the My Neat software website to see that sofware can run on v10.9 Mavericks.

Mail.app not running after upgrading to 10.10.3

After upgrading to 10.10.3 I have been unable to launch Mail.app. It either shuts down automatically or after aprox. 5 seconds.
I am attaching the error message I get. Any help would be much appreciated.
https://dl.dropboxusercontent.com/u/3701227/Mail.app%20Error.rtf
(This website wouldn't let me post this with the error inline, probably due to its length)

Mail is still terrible on my now 10.10.3 iMac, but it is NOT working (gives no content at all for my 14 accounts) on my MacBook Pro with 10.10.2 (worked as on the iMac before I upgraded to 10.10.3.
On my iPhone 6 128GB with 8.3 also Mails has started to reject. Everything works OK if I check emails in Safari.
Apple has since 10.10 had a huge Mail-problem. And they are not addressing it, nor fixing it.
.f

Test scripts for queries before and after upgrade (bi7.0)

HI,
i need to create a documnet for testing the over all functionality of the queries and wad before upgradation and after upgradation(bi 7.0) like structure, rkf , ckf variables, etc , please guide me and send me if any sample template available on this scenario
Thanks in advance
narasim

You can spool (or put in a database table) in your 10G database the sql statements and their performance metadata (this should be done when the system is really used). After the upgrade you can do the same select as used to spool. the statements in the 10G database and compare them (again in a really used system). A sql statement to use could be:
select inst_id, sql_id, hash_value, executions
,(cpu_time/executions)/1000000 cpu_time
,(elapsed_time/executions)/1000000 elapsed_time
,(disk_reads/executions) disk_reads
,(buffer_gets/executions) buffer_gets
,(rows_processed/executions) rows_processed
from gv$sqlarea
where executions>0
order by inst_id, sql_id, hash_value
Regards, Gerwin

YC_GEN app engine failed after upgrading from EPM 8.9 to 9.1 Rev1

we tried upgrading our EPM 8.9 + tools 8.49.23 application to EPM 9.1 + tools 8.53.08. After upgrading when we tried to run the YC_GEN app engine it failed with the below error.
Error:
17449 20.26.27 0.000111 321: &ln_1 = &lbi_1.Execute();
17450 20.26.27 0.017373 ErrorReturn-> 2 - Interlink Definition: Execution failed. (122,2) DERIVED_CG_BAT.CG_BATCH_PRV.FieldFormula Name:LoadDepends PCPC:27203 Statement:321
Called from:YC_GEN_TBLS.MAIN.GBL.default.1900-01-01.UpdDpnds.OnExecute Statement:2
17451 20.26.27 0.000080 <<< end-ext Nest=01 LoadDepends DERIVED_CG_BAT.CG_BATCH_PRV.FieldFormula Dur=2.480543 CPU=1.190000 Cycles=94840
17452 20.26.27 0.000028 <<< end Nest=00 YC_GEN_TBLS.MAIN.GBL.default.1900-01-01.UpdDpnds.OnExecute Dur=2.486408 CPU=1.190000 Cycles=94874
17453 20.26.27 0.008761 Database Options: override_connection_reset: 0
we tried using libpsfidrvr.so file which delivered with EPM as well as with tools both is not working.

I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
All default search engines are now available.

Cannot update apps via iTunes after iOS 8 install

After updating my iPhone 4S to iOS 8.0.2, iTunes (ver 11.4, under OS 10.6.8) will no longer do a backup nor any direct usb cord App updates. I could download all the updates to my Mac and they showed up in the connected iphone App list. Although the bottom banner showed nearly 5 GB of free space, as soon as I selected one of the App update button (which changed to "will update" the bottom banner change to read "not enough free space." Then, I tried asking it to deleting an App and it came up with the usual "do you really want to" warning. After clicking yes, it basically did nothing. I also tried doing a manual backup of the iPhone which just resulted in a very quick "scanning" status message, then nothing. I rechecked my Apple IDs, device authorizations, and restriction settings and they all seem OK. Finally, I shut down and restarted both the Mac and the iPhone then tried it all again with same results. Direct Cell or WiFi App updates on the
iPhone work fine, but, I prefer doing them via the Mac so all are locally saved, plus, I do not have to do double downloads for my wifes iphone.

If i click for example on the update button in app store, there is just this ''downloading circle'' and shows loading.. and loading.. and loading and just nothing happens. Also the sympol of the updating app gets grey and there stands ''waiting''.
If i try to download an App, there is the same on the install/download button and there shows up a grey symbol of the app and nothing else happens.
No error message or something else. Just shows that it ''loads'' and nothing happens.

Find My iPhone app changed account after upgrade to IOS7.

We have 4 iPhones, and we had created a separate iCloud account for the Find My iPhone app.
After Upgrading to IOS7, my iPhones Find My iPhone app is now tied to my other iCloud account, and will not allow me to change it back. What's up with this?

Define "locked".

App Store disappeared after upgrade

After upgrading my App Store has disappeared any suggestions?

Check your restrictions settings then restore with iTunes if it doesnt help.

Update apps before or after upgrade?

Similar Messages

Maybe you are looking for