Update backup status in DB6COCKPIT after a clone?

Hi,
we are implementing clone backups for a R/3 system running AIX/DB2.
I wonder if it is possible to update the backup status in DB6COCKPIT after a clone, with either successful or unsuccessful runs?
BR Morten

Hi,
I'll try to be a little more specific.
We have a script initiating the clones from networker every second night.
My wish is to be able to see result from the clone in the backup overview in DB6COCKPIT as we do today when networker back up the DB
OK if RC=0
Fail if RC>0
Similar to this output you can find in the cockpit (I'm aware that I have to create the status text myself, but not how to put it there):
Backup Timestamp    : 22.03.2007 12:41:52 (20070322124152)
End Timestamp       : 22.03.2007 19:42:34 (20070322194234)
Runtime             : 07:00:42
Partition           : 0
Backup Sequences    : 2
Return Code         : 0
Backup Type         : Online
Backup Granularity : Database
Backup Device       : Other,A
BR Morten

Similar Messages

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

The typical fix if the progress bar totally freezes - meaning no movement at all for more than 20 minutes - and iTunes will no recognize the device - is to try to put the iPad into recovery mode. That is explained here.
iPad: Unable to update or restore
However, don't jump the gun. Keep an eye on the progress bar and if it is moving at all - even very slowly - let it go for a while. I'm updating my iPod touch first and the progress bar is moving but very slowly.

CiscoWorks Backup status unable to detect

Hi Joseph,
I am facing problem with the Ciscoworks server backup, when i checked the backup status it says " Backup not found or unable to detect " .Also checked the dbbackup.log file and found there is no update in the file.
Please need your info on this.
Thanks & Regds,
Lalit

Hi Joseph,
I have added the following line in the backupstatus.properties file and restarted the Ciscoworks service.Also checked the Scheduler services and found to running.I have reschedule the backup. Even after that backup is not working.When i checked the backup admin page it says " Backup not found or unable to detect "
I have checked the dbbackup.log file and found there is no update to the file.
I have added the LAST_BACKUP_FOLDER= destination backup folder and rest i just kept blank
for e.g
LAST_BACKUP_STATUS=
LAST_BACKUP_DATE=
LAST_BACKUP_DETAILS=
LAST_BACKUP_FOLDER=destination backup folder name
Please need your info on this.
Thanks & Regds,
Lalit

Error while updating the status record of IDOC in SAP

Hi All,
I am facing this problem. I have done outbound processing and IDOC was sent successfully from SAP to EDI system and it was processed in EDI and now EDI system wants to send the status back to SAP with a status message and the status number that we are using is '24' and we have mapped all the fields in the status table EDIDS and made sure that EDI system sends all those and I think Counter field can not be determined by EDI system so EDI system used the counter '1' since it can not determine how many counters are already there in SAP and unless we pass the value to this counter field we were getting the error. After passing all the values the status of the IDOC is updated with the status '00' instead of '24' and we do not know why it is happened and I would like to know how SAP converts the status record that is received from the EDI system.
Please let me know how the status record will be translated into SAP from EDI system and I ahve followed basically EDIDS structure and the IDOC status is updating in SAP but with wrong status number and the alignemnt also missing in SAP fields like if I give some text in the EDI it is splitting and storing in 2 fields.
Please help me in this and I think I have explained the problem in a detail manner.
Thanks,
Ramesh.

Hi Naresh,
Thanks for the reply and my question is since EDI system is able to send the status back to SAP from EDI system and only problem is it is updatinf the status wrong and I have checked the EDIDS table also and the entry is creating with another counter and please confirm me that it is because of EDI does not support the status record update so that I can confirm to the client that there is nothing wrong in the way SAP functions and EDI system can not update the status code in the SAP.
Thanks,
Ramesh.

How can I update backup of iPhone at iCloud without wifi?

Hi Expert, Can anyone suggest how can I update backup of iPhone at iCloud without wifi? Wifi stopped working on my 4s after upgrade to iOS7. I have iTune backup but want to update at iCloud. Any suggestion? Thanks in advance.

You can't. iCloud backups can only be done over wifi.
~Lyssa

Incrementally updated backup and EMC NMDA

Hello Everyone,
I'm kind of a newbie in setting up networker module for oracle, to backup database to tape. We use the oracle's suggested backup strategy to backup DB to Disk first using the incrementally updated backups with recovery set to 3 days (RECOVER COPY OF DATABASE WITH TAG ... UNTIL TIME 'SYSDATE-3') , which helps us to recover DB to any point in time using the backup files in disks vs. going to tape. After backup to disk, we backup recovery area to tape nightly. However, we do want to maintain backup Retention Policy of 1 month. Couple of questions,
1. If i set RP to recovery window of 31 days in RMAN, then backups don't obsolete at all. this forces me to set RP in networker and they don't recommend setting RP in both RMAN and networker. how is this done generally to obsolete backups from tape as well as rman (catalog in CF) with above strategy. perhaps in this case i should set RP in netwoker and set RP in RMAN to none and rely on crosscheck and delete expired commands to sync with RNAM catalog.
2. Wondering if nightly backup of recovery area to tape is going to take incremental from previous day and NOT full backup. The reason i ask is, i do not want the tape to do full backup of FRA every day cause full backup datafiles change once in 3 days based on the until time set. is there an option do set in networker to do incremental only or that's the default.
Thanks in Advance!
11gR2, 4 Node RAC, Linux, NMDA 1.1, Networker 7.6 sp1

Loic wrote:
You do a full backup of the FRA on tape ?No, I do a full backup of the database on tape. Using RMAN together with Veritas NetBackup.
I mean if you use incremental updated backup it'll not work on tape... Because the level 0 backup that will be updated with the backup of the day after will be on tape and will not be updated.The incrementally updated backup is in the FRA only, on disk (both the image copy and the following backup sets that are used for recovery of the image copy). Never gets written to tape or updated on tape.
Why don't you use then normal incremental backup ? That will have no problem with the tape backup even if level0, or level1,2 becomes reclaimable... ?I think I do :-)
Maybe:
To keep that you can put the redundancy to 2 out of 1 copy. Like this even with one copy on disk and tape it'll say keep the 2 copies.
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;I'll think about that.

ACS 5.4 backup status in syslog

Have raised a TAC for this but thought I'd post here too.
We are running ACS v5.4 Patch 1.
We have noticed that ACS will not produce syslog messages about scheduled backups (success or failure)
(1)    From the GUI, under “System Administration > Configuration > Log Configuration > Remote Log Targets”, we have configured a remote syslog host.
(2)    Then, each logging category under “System Administration > Configuration > Log Configuration > Logging Categories > Global”, we have configured everything to log to the remote target.
(3)    However, no messages regarding successful or failed backups ever arrive via syslog.
Backup status can be checked by running “show backup history” from the CLI.
However, syslog communication between ACSView and ACS show backup status OK.
You can find backup information in ACS View under:
Monitoring & Reports > Reports > Catalog > ACS Instance > ACS Operations Audit
We have one quite simple requirement – that ACS produces syslog messages stating backup success and failure. This will drive our alarm system.
Has anyone else got this to work?
Pretty simple request - backup success/failure in syslog messages!
Forcing the output of ade.log to syslog would also do it. Would rather not hack around under the covers with root patch though.
Cheers!

Hi Rob,
I was going through your requirement and that seems to be an important notification. If we look at the ACS 5.4 guide > under logging categories. It does talk about ACS operational changes—Logs all operations requested by administrators, including promoting an ACS from your deployment as the primary, requesting a full replication, performing software downloads, doing a backup or restore, generating and restoring PACs, and so on.
Administrative and operational audit log messages are always sent to the local store, and you can also send them to remote syslog server and Monitoring and Reports server targets.
Log messages are sent to the local store with this syslog message format:
time stamp sequence_num msg_code msg_sev msg_class msg_text attr=value
Log target and logging categories.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/logging.html#wp1052656
Since you've configured ACS logging categories to log everything. It should work fine. Can you see the same message success or failure under local store logs of ACS. If we can see it there it means ACS is sending it, after that we can check in the log forwarder file and run the packet capture on the syslog server.
~BR
Jatin Katyal
**Do rate helpful posts**

Sales order - update line status to close the document with DTW

Hi everybody,
yesterday i tried to update the line status of sales order lines from "O" to "C" with DTW. At first he ask me for DocRate. Then set DocRate to "1". After then DTW wrote, that I can't update the lines, during update the document... Can someone help me..., maybe with an example for DTW.
Happy new year to everyone.
Best regards
Stefan

Hi Stefan Ressel,
Welcome To SAP Community Network Forum
Sales Order line status close that means for particular line Item Quantity Delivered through Delivery document and sales order line status open to close.
OR
You have to manually close Sales Order line status without delivered Quantity.
Check in your case Item Quantity are to be delivered through Delivery document. Right click on line & check Target document.
If Sales Order Item Quantity are to be delivered through Delivery document then SAP restrict to update line status.
Thanks,
Srujal Patel

Determinig backup status

Hi all,
Just a question with regards to RMAN. We call RMAN via a standard shell script, however, looking for advice on how to best determine if the backup was succesful or not.
Is it enough to just check the exit status of RMAN, e.g. (simplified)
rman target / @level0.rman
if [ $? = 0 ]; then
echo "Backup Succesful"
else
echo "Backup Failed"
fi
or is it advisable to, after the backup, check v$rman_status or similar to get a thorough picture of the backup status.
Our RMAN script is similar to follows (note, not in a run statement)
BACKUP INCREMENTAL LEVEL 0 DATABASE FILESPERSET 4
PLUS ARCHIVELOG DELETE INPUT;
sql 'ALTER DATABASE BACKUP CONTROLFILE TO TRACE';
sql "CREATE PFILE=''/somedir/spfile.backup'' FROM SPFILE";
sql "ALTER DATABASE BACKUP CONTROLFILE TO TRACE AS ''/somedir/controlfile.backup'' reuse";
As it's not in a run, my concern is that, the BACKUP INCR. may fail, but if the following commands succeed, will RMAN return a 'good' exit code or 'error' exit code
Thanks for your help.

I have the same "simplified" exit code checking method setup as the original poster, but there are many errors that do not affect the overall status but are still reported as failure. For example, if one of the allocated channels fails during the backup, other channels pick up its workload and finish the backup, so the backup is valid, but my script reports failure anyway. Does anyone a good way to bypass those errors and report such backup run as success rather than failure?

InfoPackage error message "Subsequent update (requests) : Status unknown "

After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown " and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
Thanks!
Luda

Hi,
Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
If possible let me know what is error message.
Regards,
Vishwa.

Error- Update Bdoc status failed- R3AD_Accounting

Hi ,
We are trying to replicate service order from CRM to r/3, after saving a service order in SMW01 it shows error "No r/3 upload"
In SMQ2 there is a queue R3AD_Accounting with status SYSFAIL stuck with the error message "Update BDoc status failed - BDoc not found"
In R3AC1 the object Accounting does not have any entries for tables or initial flow context.
Please let me know where we can maintain the entries for this Adapter object-Accounting.
Regards
Prathiba

Try releasing the queue, might be a temporary problem.
If not, check out the lockings in transactions sm13 (or sm12: I'm not sure).
Michael.

Tablespace PSAPSR3 is already in backup status

Hi!
I have planed an ALL-ONLINE Backup from DB13.
What does it mean and how can I proceed to backuo these tablespaces?
Here is the error I am getting:
BR0328E Database file E:\ORACLE\DEV\SAPDATA1\SR3_1\SR3.DATA1 of tablespace PSAPSR3 is already in backup status
BR0328E Database file E:\ORACLE\DEV\SAPDATA1\SR3_2\SR3.DATA2 of tablespace PSAPSR3 is already in backup status
And second question:
<b>Which form should have the parameter stage_root_dir, if a do a backup from windows to unix via FTP?</b>
stage_root_dir=SAP/backup or
stage_root_dir=SAP\backup
Thank you very much
regards

Hi ,
Are you taken backup successfully , if not pls check below things.
1,tablespace PSAPSR3 is already in backup status is caused last backup is not success.
pls check if any backup is running or not
ps -ef|grep brbackup .
2 , check any lock file is created under oracl/SID/sapbackup if s remove lock file from the directory .
3 , login into DB
> sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Oct 19 14:57:23 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> connect /as sysdba
Connected.
SQL> select status from v$backup;
check the status it should not be ACTIVE .
from your case Tablespace PSAPSR3 is already in backup status so login into DB
> sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Oct 19 14:57:23 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> connect /as sysdba
Connected.
alter tablespace PSAPSR3 end backup;
SQL> alter tablespace PSAPSR3 end backup;
Tablespace altered.
SQL> select status from v$backup;
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
41 rows selected.
SQL>
After complete the above activity pls fire the backup .
It might be resolve your issue .

Performing check and potential update for status control table

Cheers Experts,
I searched in the forum, but I didn't find an answer.
I'm working on a 3.0B BW system.
After updating from PSA to an ODS, in the log I see the following line:
"Performing check and potential update for status control table" and double clicking on it, it says:
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
I have 2 questions:
1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
2) What can I do to reduce its execution time, since it lasts several minutes?
Thanks and greetings.
Roberto

Roberto, did you ever find an answer to your question? We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

Status control table - 'Perform update for status control table for cube '

Hello Experts,
While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
What is status control table ? and can I have some inputs as to how to solve this issue
Regards,
arjun

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

Error   during DEV backup PSAPSR3 is already in backup status

Dear All,
When i m taking development backup.It generating the error PSAPSR3 is already in backup status.Plz tell me how to resolve this issue.
LOG file is attached.
BR0051I BRBACKUP 7.00 (13)
BR0189W Expiration period equal 0 - backup volumes could be immediately overwritten
BR0055I Start of database backup: bdxxiprp.ant 2008-05-13 17.40.29
BR0477I Oracle pfile E:\oracle\MRD\102\database\initMRD.ora created from spfile E:\oracle\MRD\102\database\spfileMRD.ora
BR0280I BRBACKUP time stamp: 2008-05-13 17.40.32
BR0319I Control file copy created: G:\oracle\MRD\sapbackup\CNTRLMRD.DBF 24461312
BR0328E Database file Q:\SAPDATA1\SR3_1\SR3.DATA1 of tablespace PSAPSR3 is already in backup status
BR0328E Database file Q:\SAPDATA1\SR3_2\SR3.DATA2 of tablespace PSAPSR3 is already in backup status
BR0328E Database file Q:\SAPDATA1\SR3_3\SR3.DATA3 of tablespace PSAPSR3 is already in backup status
BR0328E Database file Q:\SAPDATA1\SR3_4\SR3.DATA4 of tablespace PSAPSR3 is already in backup status
BR0328E Database file G:\ORACLE\MRD\SAPDATA1\SR3_5\SR3.DATA5 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_6\SR3.DATA6 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_7\SR3.DATA7 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_8\SR3.DATA8 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_9\SR3.DATA9 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_10\SR3.DATA10 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_11\SR3.DATA11 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_12\SR3.DATA12 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_13\SR3.DATA13 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_14\SR3.DATA14 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_15\SR3.DATA15 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_16\SR3.DATA16 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_17\SR3.DATA17 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_18\SR3.DATA18 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_19\SR3.DATA19 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_20\SR3.DATA20 of tablespace PSAPSR3 is already in backup status
BR0056I End of database backup: bdxxiprp.ant 2008-05-13 17.40.35
BR0280I BRBACKUP time stamp: 2008-05-13 17.40.35
BR0054I BRBACKUP terminated with errors
Thank and Regard's
Adil

Hi ,
Are you taken backup successfully , if not pls check below things.
1,tablespace PSAPSR3 is already in backup status, This error usually occurs when you are running an Online Backup and because of some previous failed backups the table spaces are still under back up status.
pls check if any backup is running or not
ps -ef|grep brbackup .
2 , check any lock file is created under oracl/SID/sapbackup if s remove lock file from the directory .
3 , login into DB
> sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Oct 19 14:57:23 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> connect /as sysdba
Connected.
SQL> select status from v$backup;
check the status it should not be ACTIVE .
from your case Tablespace PSAPSR3 is already in backup status so login into DB
> sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Oct 19 14:57:23 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> connect /as sysdba
Connected.
alter tablespace PSAPSR3 end backup;
SQL> alter tablespace PSAPSR3 end backup;
Tablespace altered.
SQL> select status from v$backup;
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
41 rows selected.
SQL>
After complete the above activity pls fire the backup .
It might be resolve your issue .
Edited by: satheesh0812 on Oct 19, 2010 11:54 AM

Update backup status in DB6COCKPIT after a clone?

Similar Messages

Maybe you are looking for