Update BSEG-BEWAR when an FI document is posted

Hi,
The requirement is to update BSEG-BEWAR (Transaction Type) when an FI document is posted by any of the transactions F110, F111, FB01 or FF_5.
Substitution exit is not working for F110.
Please let us know any USER EXIT/ BTE/ BADI for the same.
Thanks,
Sweta

hello,
you could add implicit user exit inside FI_SUBSTITUTION_DOC FM.
br,
dez_

Similar Messages

  • Profit Center to be populated in documents already posted

    Hi,
    I work for a retail client. There is a store that went live about a week back. There is a validation applied, which updates a profit center to the tender GL accounts (differnet kinds of revenue - like cash/credit card/debit card/sodexho etc) .
    As the validation was missed to be transported - profit center is not to be found in tender documents. Is there a way out that I get the profit center updated to the tender documents that have been posted until now. In other words update of profit center in the documents already posted.
    Regards,
    Soujanya.

    hai
    Profit center never gets updated in Table BSIK and BSAK ...You will never get it in FBL1N..Please use KE5Z or S_ALR_87013346 or S_ACO_52000888 Payables - Profit center as an alternate ..
    As you must be aware that profit Center information is never entered in Vendor in line item. It is only entered in the expense/income line items...You will always find this field blank in BSIK ...BSIK and BSAK segmentation table is BSEG , PRCTR is there hence it can be set in O7R3 as a special field to be displayed in ledger but it will not show values. I hope it clears you.
    Thanks and regards

  • Parked document could not be posted 00 S 349 BSEG-BEWAR

    Hello Friends ,
    Users have parked Journal entries which has vendor , customer and GL line items .
    the documents were getting posted through workflow till sometime back .
    suddenly  , we have started to get the error message as    " Parked document could not be posted 00 S 349 BSEG-BEWAR "
    the BSEG-BEWAR field is missing in the SAPMF0A screen while trying to post.
    Could you please guide me what could be the reason .
    I did search before posting this question ,  but not able to find any relavent ones.
    I am aware of the function configuration using OB41, but not sure if the issue is related to the same.  
    Please assist.
    thanks
    Raghu V

    Hi,
      BEWAR field is Transaction type field. Check whether Transaction type is missing in your document.
    The issue is not related to OB41.
    Regards,
    B. Radhika

  • When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

    When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

    Apple Mail uses Apple's own PDF viewer, and it's ... well, let's be friendly and say not really up to par. Don't use it for anything else than ascertaining there is *something* in your mail. Then use the free Adobe Reader to view your PDF.
    See this recent thread: http://forums.adobe.com/message/4526583

  • HT5534 I down loaded the new  iwork update. Now when I create a document in pages save it and try to open it later some times the message comes that You need a later version of pages. Some times I don't have that problem.

    I down loaded the new  iwork update. Now when I create a docume

    I hate the new 5.0, and am having the same issue. Because I created or opened and saved several documents in the new 5.0 before I realized how bad it is, I had to figure out how to make them usable again.
    I have both versions of Pages (5.0 and 4.3) in my Dock for now. If a document tells me that it can't be opned by 4.3, I opn 5.0, open the document, EXPORT it in 4.3 with the same name, and overwrite the old document. That usually (big dog willing and the creek don't rise!) gives me access to my work.
    Once I am sure I have no remaining 5.0 douments around, I'll take 5.0 out of the dock.
    It truly is a pain in the ***. Here's the comment I left for Apple –
    I am now attempting to uninstall Pages 5.0 so I can go back to using Pages 4.3. The designers of 5.0 took away (or hid) so many of the functions that I've come to know and trust that I am appalled.
    It is now a kindergarten version of the workhorse I knew and loved. IT EVEN LOOKS like a dumbed-down app now, with cartoon buttons that reflect its audience – people who don't need a sophisticated, customizable publishing tool, who just need simple  icons they can point at LIKE A FAST FOOD CASH REGISTER.
    I'll be using either 4.3 or Word for Mac from here on out.

  • Document info fields in Word won't update when placed in document header-section

    Dear all,
    I have a document library using 3 Content Types with metadata columns and a Word-template.
    The values of these metadata columns should be displayed within the Word-documents created from content type.
    So I've inserted document info fields into the Word-template to display them.
    But unfortunately the placeholders are not updated when opening the document again, after metadata values had been changed e.g. by using the edit-form within the list.
    From what I have seen so far, this only refers to document info fields resident in header or footer sections. 
    But this is where I need to place them.
    Does anybody know this issue and has an idea of how to fix it?
    Could VBA be of use here?
    Best regards,
    Ben

    Hi,
    Based on your description, document info fields in Word won't update when placed in document header-section.
    Per my test, document info fields in Word will update when placed in document header-section.
    Refer to the following article about Add SharePoint Metadata to Word Documents:
    http://whitepages.unlimitedviz.com/2011/02/using-document-templates-with-lists-and-content-types-in-sharepoint/
    https://www.premierpointsolutions.com/training/help-and-how-to-articles/add-sharepoint-metadata-to-word-documents/
    If I misunderstanding the issue, Please offer a screenshot about your issue.
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • HT5527 My icloud apple ID had been disabled after icloud services downgraded my 18Gb documents in the cloud to 5Gb. I can't updated now because when i try to do it i get a message saying that my ID is disabled

    My icloud apple ID had been disabled after icloud services downgraded my 18Gb documents in the cloud to 5Gb. I received an email from icloud services a couple of months after i upgraded my icloud storage (on Sept30th) saying that my billing info was wrong. In fact my credit card was outdated so i updated my credit I can't updated now because when i try to do it i get a message saying that my ID is disabled. Can you help me?? I can't access my docs now...

    See this Apple document for help...
    http://support.apple.com/kb/ts2446

  • Update was terminated when creating document through FBR2

    Hi,
    I am getting the error "Update was terminated " when I try to change the GLcode and post the document through transaction FBR2. The ABAP dump error shows ASSERTION_FAILED in the program LGLIOA20 , form OBJECTNR_FIND_GLPCC. Moreover it's a V1 update.
    I am not sure what data is missing during the posting. Can you suggest what would be the cause for termination occurred?
    thanks
    Renga

    Welcome to SCN.
    Have you looked for notes on this problem?
    Rob

  • Update BSEG-ZUONR with VBRK-BSTKD

    Hi experts,
    This enhancement will kick in in real time when ever a billing document is generated and it involves posting into accounting.
    Update BSEG-ZUONR with VBRK-BSTKD .
    I need the substitution rule exit details.
    Plz can u tell me that whether I can get BSEG-BELNR value into this substitution rule exit or I should go for something else.
    <removed by moderator>
    Thanks
    Edited by: Thomas Zloch on May 3, 2011 3:17 PM - urgency reduced

    Hi
    In my opinion, it will be easier with an enhancement. See Note 301077 - User exits for the interface to accounting. Depending of what kind of item you want update, you can write this code:
       xaccit-zuonr = vbrk-bstkd.
    In the corresponding ZX* include.
    I hope this helps you
    Regards
    Eduardo

  • Extension for MIRO to update BSEG/BKPF

    Hi Experts,
      When MIRO transaction is saved, an user-exit should be triggered to update the 3 fields like ESRNR,ESRRE & ZLSPR(which is stored in structure RBKP_V).
       I tried all the 7 user exits (LMR1M001,LMR1M002, LMR1M003, LMR1M004, LMR1M005, LMR1M006, RMVKON00 , MRMH0001, MRMH0002 ,MRMH0003, MRMN0001) and 1 badi (INVOICE_UPDATE) .But in all this the structure RBKP_V is an importing parameter except LMR1M006 .But this user-exit is not getting triggered because it is change XML data.
    Now what I am looking is , to update the 3 fields in tables BKPF or BSEG. Because when a MIRO is saved , 2 document number is created (1 in Accounting document and the other in Invoice document ).
    So is there any user-exit or BADI to update BSEG /BKPF in transaction MIRO.
    Kindly help me
    It is very urgent.
    Thanks in advance
    Points will be rewarded.

    Hi Vinod,
              This can be done through FI Substitution, you may need to write an Exit in FI Substitution. Talk to your FI Consultants, and they should help you.
    Regards
    Srikanth M

  • Pages crashes when opening any document on iPad 3 Latest version.   I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create anew document or open a document it just cr

    Pages crashes when opening any document on iPad 3 Latest version. I tried everything I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create a new document or open a document it just crashes out.

    Try this:
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • Auto update of Ztable when ever BSID or BSAD tables updated

    Auto update of Ztable when ever DB table updated     
    Hi experts
    I want my Ztable get updated automatically when ever a record is created or updated in BSID or BSAD tables.
    Here clear requirement
    Generally using Company code & Allocation number  ( 18 char ) my programs access BSID & BSAD tables it is taking very long time for execution almost more than 30 minutes ( data in millions ).
    Step 1.
    I created a new Ztable with limited fields Company Code, Customer, Document, Allocation Number and Posting date.
    Step 2.
    Before look into BSID or BSAD my program searches Ztable for Customer number & Document number using Allocation field and Company code.
    Step 3.
    Once get the Customer & Document numbers accessing BSID & BSAD table is very easy (now just taking less than 1 minute).
    Created a new program to update Ztable every day but BSID and BSAD are live table so I want my Ztable get updated immediately when any entry posted in BSID or BSAD
    Please help me
    Satya
    Singapore

    You need to check what is the procedure (T-Code) from which the data gets updated into these tables.
    For example
    when we craete a material from MM01 the data gets updated in the corresponding table i.e. EKPO.
    In same way you need to find the process and then you can use BTE (Busineess transaction events) for that process. BTE are only for FI module and these tables are also related to FI .

  • HT202879 How do I fix "the required index.xml file is missing?" when opening Pages documents?

    I can't open any documents from my son's iPad.  Error message: the required index.xml file is missing.  How do I fix this error so that I can open his Pages documents?  Before I ran the latest update as prompted when I opened Pages, I WAS able to open and view the document.
    I did try restoring Pages using my Time Machine, but it still won't open the Pages document.
    I have a brand new iMac that I just set up last week. 
    Son uses iPad at school, so we update when the school asks him to update.  Will doublecheck his version of Pages but it should be pretty recent.
    In general I don't like using Pages because it lacks a lot of the backwards / forwards compatibilty of Microsoft Word. 
    However, it is what my son uses with the iPad. 
    Most of the time I have to export his files as WORD files because we never seem to have compatible versions of Pages between the iPad and the desktop iMacs. 
    Where can I recommend that Apple improve its compatibility issues with Pages?
    This week I am going to receive a new iPad at my school (I am a teacher) but I am 100% certain that it will not be compatible with the older version of Pages on my classroom iMac.  I also avoid using Keynote for the same reason.  I have 15 year old Power Points that I can still open, but I am hesitant to switch over to Keynote because I want to be able to open my files any time, any where.
    Please advise.

    Not sure what v5 is. Someone helped me and opened it through Pages 5.2, through the program, rather than the Finder. Thanks for making a suggestion!

  • [CS4 JS] ScriptUI - Update palette with properties from front document

    Hi all. I have created, with ScriptUI, a palette containing, among other things, a ListBox containing items for every xmlElement in a document. I want the control to read from the front document when there is more than one document open, and to update when there is a new front document.
    I've added event listeners for "afterRevert," "afterOpen," "afterNew" and "afterClose" that call the function that populates the ListBox. The ListBox is successfully updated on closing the front document, reverting, or making a new document, or when opening a document when no others are open. However:
    1.) The control doesn't update when a second or third document is opened. It "hangs on" to the first document. I've tried defining my document variable, in the function called by the event listeners, as app.documents.item(0) and as app.activeDocument, with no change in behavior. And
    2.) I don't know how to update the control when bringing to the front an already-open document. I've tried adding an onActivate listener to my palette window that calls the ListBox population function, but the palette window isn't deactivated when you change the front document using command-~ or the Window menu, so it only works if you switch documents by clicking their tabs in the application window.
    Can anyone help me? I think I'm missing something basic in my approach. If not, I can clean up some code to post.
    Thanks,
    Jeff

    2.) I don't know how to update the control when bringing to the front an already-open document. I've tried adding an onActivate listener to my palette window that calls the ListBox population function, but the palette window isn't deactivated when you change the front document using command-~ or the Window menu, so it only works if you switch documents by clicking their tabs in the application window.
    Perhaps adding an eventListener to the appropriate menuItems (that changes the activeDocument) to update your palette will do the trick?

  • InDesign cs3 crashes when opening CS2 documents

    ID cs3 crashes when opening CS2 documents, not when open dialog appears, but after I choose file and it "starts" opening it. (core duo, xp, clean install, all updates)
    If i open ID by opening file, it crashes with standard windows dialog, if I open ID first, it does not crash, but rather behaves strangely, nothing is opening, if I move a mouse it turns to sand clock.
    Same thing happens on all machines with ID cs3 in my office.
    All other apps works fine. I did read every single forum about ID crashing and nothing helps. Files resaved in interchange format opens well. There must be something in the files that ID cs2 did and what id cs3 cannot open :( Any ideas?

    1. Is there any reason to use eps? Avoid it use AI, PSD or PDF instead.
    2. Are all used fonts ok? What kind of fonts du you use?
    3. Which Mac OS X do you use?
    Does it crash with alwayst the same files?
    What does the file history tell you? Hold down the command key and got to InDesign > About InDesign… Does it tell you somewhat more specific, like missing plugins, severly damaged files and restored files, when (in which version) the files have been created first (helps often to export to IDML and open this again and save it as INDD and work with the new file.), has the problematic file been converted from another application (Quark Xpress or PageMaker), etc.

Maybe you are looking for