Update business area errors in T.code F.50 & F.5D

Dear Friends,
In some of the business transactions, the business areas are missing.
In order to resolve the issue, I used T.code F.50, I am getting the errors
"Errors have occured in automatic account determination" & No Posting were created for the current company code.
I also used the T.code F.5D, I am getting Runtime Error
The ABAP/4 Open SQL array insert results in duplicate database records & " INSERT BFIT_A0 FROM TABLE ZBFIT_A0."
How to resolve the errors? Please advise.
All the help will be greatly appreciated.
Regards
Sridhar
Edited by: Sridhar M on Jun 24, 2009 4:33 PM

the issue is closed

Similar Messages

"Check Business Area of the company code" error while posting stock

Hi Experts,
While posting stock to a storage location of a plant , the system is giving me the following error message :
"Check Business Area of the company code" .
Would highly appreciate if I could get some info for this error message and how to resolve the same.
Thanks & regards
Vikas Hali

hi
i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
then post the stock
regards
vijay

How to Update Business Area Field in Posted Document?

Dear All,
Pls tell me how to update Business Area in documents which are posted without entering Business Area field. Pls tell me how to achieve this without using Validations & Substitutions. Any table entries can be maintained for this? Kindly guide.
Regards
Abhijeet

Hi,
I think, you need to post mannually if you have the list of documents posted with out business area.
ex:
1.Before posting of accounting entry as below, you should deactivate business area component in OB65 againest your co.code
2.Post accounting entry as below
40 123456 without business area 100
50 123456 with business area ABC 100
3. Goto T.Code: OB65 activate the business area component.
4. After posting of accounting entry like above you should run transaction F.5D and F.5E again, make sure that above entry not come again while executing F.5D.
First you can try this process in dev client, if you are comfort with this process then follow the same in quality and production.
Note: You can do this transactions in production client, only when there were no users working on the system.
all the best
Regards,
Prasad

Why is business area assignment to co.code, not required

why is business area assignment to co.code, not required

Hi
You can define a business area in <b>OX03</b> (SPRO>Enterprise>Definition-->FI)
And now if you want to assign this business area to your company code, you can do so in configuring the global parameters <b>OBY6</b>
It all depends on how you want to assign your business area. You can also assign all the balance sheet accounts and P&L accounts to a business area.
Well, in the configuration, business area field would have been optional in the field status group; thats why you might think that its not required.
Hope you got a picture what I am trying to say; if not, explain us your exact problem, will be forwarding the right answer.
Regards,
NareN.

Need you help to update business area for FI Document generated at migo

HI guys
I am looking for MIGO Badi or user-exit which will help update business area which is mandatory field but when movement type 101and the account assignment tab is not there when the movement type is 101 at the time of GR so i want to update it BA in for FI Document generate in background so as to complete the GR.
Thanks

Hi Niraj ,
I Have check the badi but there is no structure of FI item data generated for which i can insert the BA for the line item generated
Thanks
Regards
Nilesh

Userexits/Badis for MIGO to update business area(GSBER) in FI constitution

Hi ,
I need to update business area field (GSBER) for accounts document after Goods Recieve (GR) through MIGO and Post Goods Issue (PGI) through VL02N.
Can you please tell me the userexits/BADIS for this requirement
Thanks in advance
Sakti

Hi Sujit,
Thanks for reply
I tried with both BADIs. After implementing I put break point.
And goto MIGO. and filled req. fields and click on SAVE button, it should be stopped there.
But it is not stopping there.
Regards,
Sakti

How to update Business area field for alread

Hi,
Recently we activated Business area financial statements in our system. After that all SD entries are showing Business area field in all SD billing-Accounting documents.
But the entries before the above change were not showing Business area since it was not activated before. But i want to update the Business area for the old documents also. so that it will be useful for me in reporting purpose.
Kindly suggest me if there is any PROGRAM to update Business area field for the old documents.
Thanks
Sunil

Hi,
Please check the OSS Note 549182 - FAQ: Business Area Accounting
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=549182
Also OSS note 41294:-
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=41294
Regards,
Gaurav

In Posted Document How to Update Business Area Field ?

Hello peers,
I am training to update Business area in some of my line items, for example when i have posted a doc in MIRO it has not updated in my TAX a/C's. Now i want to update the same. So i tried doing the F.5D and F.5E, but it's saying
Nothing was selected
Message no. FR333
In one of the threads i read in OB65 business area has to deactivate, then post, and then activate the same to do F.5D. but it is activated before posting the documents.
What should i do now. and what should i maintain in OBXM.
Please guide me to do the same. or suggest if any other way of doing it.
Thanks in advance
Murali

Dear Murali
Maintain a Clearing A/c under transaction GA0 e.g. Business Area Clearing A/c
Make sure you have activated Business Area FS in OB65
Then run F.5D and Post through F.5E B
However by doing this you will not be able to update the Business Area but it will pass an adjustment entry
Hope it Helps
Cheers
IMK

Customisd err message at MIRO - Business area V/s company code validation

Hi experts,
We have simple validation for company code V/S Business area check in place ,
While doing MIRO system throws error for a particular company code and Business area
combination the set error message ( customized - Business are does not match with company code)
This validation has given as a sub node (step) of another consolidation trx. types against GL validation (that was in place earlier, thats why)
But when we do through F-02 (Journal entry ),F-43(vendor invoice), F-22(customer invoce) for the same combination system passes the entry !!!
what may be the cause ?
the error message is the standard one set -251 this message is custom created at Validation (GGB0)
Business area doesnt belongs to the company code
Message no. /ASU/GENERAL251
One more thing Noticed
The Material PO is a account assigned (K) cost center and the
cost center Business area is 1003.
In PO plant is 1003 and i checked the MSEG the plant shows 1003
But in Logistics assignment the Business area 1001 is tagged to Plant 1003
not THE BUSINESS AREA 1003 !! . I mean at plant/valuation area to Business ara configuration
the valuation area 1003 is assigned to Business are 1001 not to Busienss are 1003!!!
Edited by: melgibson on Feb 15, 2012 1:42 PM
Edited by: melgibson on Feb 15, 2012 1:43 PM

Hi
thankx for the reply,
there is no exit/ set for validation here
I have done like this
Pre requisite
company code = xxxxx
Check
Business area = xxxx or BA = XXXXXX or BA = XXXXX ......
Message
E Message class /ASU/GENERAL
251
Business area doesnt belongs to the company code
Message variables
1 BSEG - GSBER
The t codes like F-43 AND f-02 1003 cc TO 1003 BA is perfectly working !!! our problem is at MIR7/MIRO
only there the error pops up even the combination is allowed in the above mentioned validation??
Edited by: melgibson on Feb 15, 2012 2:03 PM
Edited by: melgibson on Feb 15, 2012 2:04 PM

Business Area into New Company code.

Hi Peers,
My Client is selling one of its Business Area and the Buyer wants to be able to use the existing SAP system. We have dicided to create a new CCD and trsansfer all the AR/AP open items of this perticulat business area in old CCD to the new ccd and business area. We also want to transfer the Asets into the new CCD by retiring them in old ccd. Please advice on the measures that needs to be taken in these processes. Also, the fisical year for the New ccd is going to be different from the old one, in this case what are the effects on the transfers and loads and exchanges rates and etc..
Please advice. My e if needed: aravind_s2k at ya***com

Hello,
I want to discuss with you about Business area so let is go:
Business areas are primarily used to facilitate external segment reporting across company codes
So from this sentences it is mean that you can assign more than one company code to one business area and there is another thing, that Business is defined on the Client Level not on the Company Code level.
There is another useful task from Business are that you can create Financial statement on the Business area level BUT
Financial statements at business area level are therefore only suitable for internal reporting
To be able to create financial statements, the data has to be updated in the general ledger transaction figures
I hope that it will help,
Regards
Hussein

Update business area

I have created new business area because my client require the financial report business area wise but earlier it was not maintained in existing company code they have posted documents no of documents with out business area . please let me know is there any program to update the same or sap notes.
Thanks in advance.,
Regards
RRR

Hi,
Updation of Business area to old transactions is not possible.
If still the user wants you can do post an entry like this.
Ex:
Admin.,Exp a/c Dr with Business area 1000
Admin Exp a/c Cr without Business area 1000
After posting of a transaction like this, they will get business areawise results, but it doesn't change the already posted documents.
all the best.
Prasad

GR blocked stock posting - Business area error

Dear experts
While posting of Goods receipt with movement 105 we are getting the below error:
"Balancing field "Business Area" in line item 001 not filled.
As we all know, this error pertains to document splitting. Based on the SDN messages I have chekced the relevant settings and possible ways but i found everything is fine. i.e, Material Master profit center maintenance, OMJ7, table entries T134G etc.,
Kindly suggest Is this issue relevant for movement 105 or something else.
Kindly Provide your valuable inputs to resolve this issue.
Thanks in advance
Rao

Hi Vivek
Thanks for the quick support,
As per your inputs i have checked the Material Master, divison is maintained in Material master, but the same division is not maintianed in t.code OMJ7 for the cobmination of Plant, Division and Business area.
Is this encountered the error message?
Please revert with your valuable inputs,
Thanks once again
Rao

Business Area Error

Hi Gurus,
While posting vendor excise invoice through J1IEX, in case of purchasing asset through MM route, system is showing an error which says business area is missing for line 1.
In accounting document of GR, business area exists.
Please help me and tell me, what is missing?
Thank You

Hi,
In this case u r facing a problem with field status groups. First do one thing check the field status group for movement type and field status group for document type and field status group for posting key regarding Business area field.
In your case business area field is optional in one transaction, and it was supressed in other items(document type,postikey fsg).
Make it optional in remaining field status groups also from supress. Then u r allowed to post the transactions.
all the best
Prasad

Business Area error in BAPI_ACC_DOCUMENT_POST

I am using BAPI_ACC_DOCUMENT_POST to post an accounting document (FB50). In the header of BAPI parameter I pass BUS_ACT as 'RFBU'.
I am getting an error message Cost center belong to business area 'XXX' not 'YYY'. The reason is see for this error is there is a substitution rule defined saying if business area is blank, default this to 'YYY'. Business area is not passed through interface of BAPI, but business area 'XXX' is maintained in Cost Center master data.
In the case of BAPI, BAPI is getting the business area from substitution and during the function call 'K_COBL_CHECK' inside BAPI, the business area of G/L line item and business are from cost center is not matching.
But when the same is entered through FB50, its getting the business area from cost center and business area. Is there any SAP Note to solve this issue. Is any one aware of this.
Thanks
Vishnu

And if business area is blank (not maintained in cost center master) and you don't pass anything, BAPI works correctly right? If you could determine the business area , why not pass it to BAPI?
BAPI sometimes do have minor differences from online transactions.. I don't see it as a big issue.. you can look for OSS notes or see how others handled it...

Business area ,plant and company code

is the business area assigned to plants in configuration or is it only at company code?

u can assign business area to plant as well as to company code..
chek table T134G for the assignment to plant
reward points if helpful

Update business area errors in T.code F.50 & F.5D

Similar Messages

Maybe you are looking for