Update CE SR1 to CE SR3 trial version

Hi,
do you know if i can update the trial version of CE sr1 to CE sr3. What does happen with the license? Does it get 90 days once again?
Thanx in advance,
V S

Hi,
The trial version cannot be updated. You can only install it anew.
Cheers,
-- Vladimir

Similar Messages

Error: Installing CE 7.1 SR3 Trial version Error @ Step 27 of 35

Experts,
I am trying to install SAP Netweaver Composition Environment 7.1 SR3 trial version, after filling in the installation parameters while executing the set up fails/hangs at step 27 of 35. With the following error message ;
Cannot start instance service of instance CE1/SCS01 on host b4b-3f-034-3f5. SOLUTION: Start the instance manually and choose OK to continue
I keep on receiving the same message, even after manually starting CE1 instance via SAP mmc console, after 2 -3 repeated attempts the set up either hangs at step 27 of 35 displaying the error dialog as above repeadetly or the set up exists giving the following error msg in the error dialog;
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Cannot find sapcontrol executable at these locations:
b4b-3f-034-3f5/sapmnt/CE1/SYS/exe/uc/NTI386/sapcontrol.exe.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
Guide me resolve this, maximum points would be rewarded immidieatly.
Paras

Hi Paras,
Try with uninstalling the previos installaion and removing all entries from regesitry. Also remove all the folders from the directory manually.
Before installation check
"If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. "
You can refer the documents for MS Loopback adapter installation from DVD "CE 7.1 SR3\DOC\html\loopback.htm"
Try to reinstall the CE after that .
Regards,
Niraj
ps: plz provide points if it helps...

Update to inspirations browser fails in trial version of PSE 10

Downloaded trial version of PSE 10. The second time I opened the program the Welcome Screen had instructions on updating the Inspirations Browser, which I had been using to access tutorials. I deleted the browser from my hard drive as instructed then clicked on download. An error was returned "A download error occured. Try to down load again?". Appears to be downloading Adobe Air, but I can't be sure. I tried deleting Air and then tried Inspiration update again with same result.
No help from support, naturally, since it is trial version.
Windows Vista, sp2.

Set IE as your default browser.
Ken

(UPDATE) Where is the free demo/trial version for Tearaway Unfolded?

UPDATE: furryhawk has said we'll get the demo version of Tearaway Unfolded available on the PS Store a few days before launch. Thank you to furryhawk for pointing it out. When I saw the Tearaway Unfolded trailers and gameplay videos, I was overjoyed and couldn't wait for the game to come out, even the pre-order for the game is available on the PS Store, every Tearaway fan pre-ordered it because they can't wait for the game and that's great! But my question is... when are we gonna get a free demo/trial version on the PS Store before the full game itself comes out? Can you please answer this question? Because I don't know when it'll come out.

Okay, thanks. I'll put an update about it on the thread. Again, thanks for saying that we'll get the demo a few days before launch. I appreciate it!

Installation problem with Composition Environment 7.1 SR3 - Trial Version

Hi guys,
I'm installing that 1.6G version of Composite Environment. I encountered the following error just after I accepted the license agreement.
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DGAPIMon' does not exist on the 'localhost' host.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
I'd appreciate it very much if you could help me

Hi,
1. See to it that all previous instances of SAP trial versions of sw have been removed from your PC/laptop.
2. Remove your laptop from any network and install Ms- loop back adapter or have a it connect to a network with proper IP.
3. Have your DHCP enabled.
Let us know if above suggestions worked for you.
Cheers!!
Sukanta Rudra

Error in installing CE SR3 trial version on windows

I got the following error while installing SAP NetWeaver Composition Environment 7.1 SR3 Evalution SDN Version - Java EE only
on my Windows XP, 1 GB RAM, 1.6 GHZ processor speed
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile configtool.0.trc: ' INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.000] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.engine.configtool.batch.BatchInstall" INFO: Loading 51 JAR files: [D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jaas.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jdbc.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jload.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jperflib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jsizecheck.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartup.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupapi.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.infoprovider_lib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.manager.offline.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comslctcimport.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcantlrruntime.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblconfigimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbldeploycontrolleroffline_phase_asm.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbliqlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljdsrjdsr.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummyframe_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummykernel_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_utilimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljrfcimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbloffline_launcherimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblopensqlimplStandalone.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblslutilityimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbcatalogimplCatalog.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbdictionarydatabaseimplDictionaryDatabase.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtci18ncpjarIMPL.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjebootstrapimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjecfscontainerstandalone_impl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeclientlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeconfigtool.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeextramile.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflineconfigurationimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflinelicense.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeoffline_deployimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjewebcontainerimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsapxmltoolkitsapxmltoolkit.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsdtcvlimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecdestinationslibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecinstallertoolsimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcseclikeylikey_assembly.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\servlet.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\tcje~cl_deploy.jar, D:\sapdb\programs\runtime\jar\sapdbc.jar] INFO: Start PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path '.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
Plz help me..itz urgent,
Cheers,
Aravind.

Hi,
Did you check C:\Program Files\sapinst_instdir\CE71_DEV_ADA\configtool.0.trc? I guess it should contain a hint on what's wrong ...
Best regards, dido

Camera Raw 7.3 Update replaced Photoshop CS6 Standard with CS6 Extended Trial version

How do I get back to Photoshop CS6 Standard edition after Camera Raw 7.3 update?
After installing the Camera Raw update photoshop now runs as the Trial version of Photoshop Extended.

I upgraded CS6 and Lightroom 4 today and then when restarting Photoshop CS6 this evening I get a dialog about registering with my e-mail for Photoshop Extended Edition Trial.
I have never owned the Extended edition and did the update from my existing product using the Adobe Update manager. There should have been no reason for this mistake to occur.
I've done upgrades like this many, many times before and have never had my system react this way. You clearly have a bug in your update process and should fix it pronto. Do you know how confusing it is to get a dialog like this? Should I let it register me for a product I don't own? Is that going to somehow trash my legitimate license (now there's the process of activation, I'm always concerned that I'll mess things up and end up unable to use Photoshop until support can help me out)
I'll go find my serial number and re-enter it, but I think this is a serious bug - and will make me much more cautious about waiting to apply updates until I've read the forums to make sure it's safe to do so

NW CE 7.1 SR3 Trial to SP4

Hi,
I've seen that SP4 patches for CE are available for download. Is it possible to update the SR3 trial version to SP4 and can I change the license from trial to standard?
Best regards,
Kevin

Hi Kevin,
I have not tried this but here is a document which tells about "Updating the SAP NetWeaver CE System From SP03 to SP04 or Higher".
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70f61bb1-2f90-2a10-f0be-e1cfa350def6
Hope this helps.
Regards
Pankaj

How can I reinstall the trial version of Photoshop 2014 cc?

I downloaded a trial version of Photoshop 2014CC and installed it but the software did not work. I did the update but it still did not work. So I uninstalled the software and tried to reinstall the trial version but adobe download allow me only to update which always failed as the trial version was uninstalled. How can I do. Without the trial version installed, can I buy, install the software and activate?

I finally resolved the problem by uninstalling the creative cloud and reinstall both cc and photoshop 2014 cc. This time it allowed me to reinstall. I guess the problem was caused by cc still flagged that the photoshop had been installed.
BTW my os is Mac OSX 10.7.5
Thank you for yr prompt response.
Rgds,
Nuekruk
Sent from my Samsung Galaxy smartphone.

NetWeaver 7.01 ABAP Trial Version extended key

I am requesting a 90 day extended key from http://www.sap.com/minisap for NetWeaver 7.01 ABAP Trial Version and they keep emailing me the long digital key when I need the 24 character key. I select NSP - SAP NetWeaver 7.0/2004s (SP9 and higher) as the System ID and key in my active hardware key.
Does anyone know how to update the license key for the trial version?

I typed SAP trial license in google and got: [SAP Sneak Preview License Key Request|https://websmp205.sap-ag.de/sap/bc/bsp/spn/minisap/minisap.htm]

Difficulty downloading trial version of premiere pro?

I am trying to download the trial version of premiere pro. I clicked on the adobe site to download the software and up pops a creative cloud window that says an update is available. It look like I have no choice but to install the Creative Cloud update before I can install premiere pro. However, once I click to install the update, the update starts installing but then it freezes at either the 3% mark or the 21% mark. My internet is working, though it might be a bit slow. How can I either skip the creative cloud update to just download premiere pro trial version or how can I prevent the update from freezing?

Thanks for the suggestion! However, I just bought Premiere Pro and moved to a place with better internet connection. It seemed to work then..

Adobe Acrobat proXI Trial Version Query

Hi,
We had something urgent that our comapny required, and that particular option is only available in Pro XI. Since our procurement process takes a while, we thought we will use the trail version in the meantime.
So we have updated 100s of PDFs using the trial version. I would like to know if the final pdfs that were edited using the trial version, will show any stamp of trail version, or will it cause any corruption in the pdf after the trial period expires.
Thanks
Abhi

The trial has 100% the same functionality as the licensed version. Documents edited or created with the trial version are not in any way marked.

Configuration failed for Windows Server Update Services on Server 2012 R2 Essentials (Trial Version)

Hi,
I'm trying to setup the WSUS on the Server 2012 R2 Essentials (Trial Version) but with no luck. Below are the logs generated. Hopefully someone can guide me on this. Thanks.
2014-10-15 12:23:06 Postinstall started
2014-10-15 12:23:06 Detected role services: Api, UI, WidDatabase, Services
2014-10-15 12:23:06 Start: LoadSettingsFromXml
2014-10-15 12:23:06 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
2014-10-15 12:23:06 Value is true
2014-10-15 12:23:06 End: GetConfigValue
2014-10-15 12:23:06 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentDirectory
2014-10-15 12:23:06 Value is C:\WSUS
2014-10-15 12:23:06 End: GetConfigValue
2014-10-15 12:23:06 Content directory is C:\WSUS
2014-10-15 12:23:06 Database roleservice is not installed
2014-10-15 12:23:06 End: LoadSettingsFromXml
Post install is starting
2014-10-15 12:23:06 Start: Run
2014-10-15 12:23:06 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:06 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:06 Fetching WsusReportersSid from registry store
2014-10-15 12:23:06 Value is S-1-5-21-308464661-3380577483-199018475-1001
2014-10-15 12:23:19 Configuring content directory...
2014-10-15 12:23:19 Configuring groups...
2014-10-15 12:23:19 Starting group configuration for WSUS Administrators...
2014-10-15 12:23:19 Found group in regsitry, attempting to use it...
2014-10-15 12:23:22 Writing group to registry...
2014-10-15 12:23:22 Finished group creation
2014-10-15 12:23:22 Starting group configuration for WSUS Reporters...
2014-10-15 12:23:22 Found group in regsitry, attempting to use it...
2014-10-15 12:23:22 Writing group to registry...
2014-10-15 12:23:22 Finished group creation
2014-10-15 12:23:22 Configuring permissions...
2014-10-15 12:23:22 Fetching content directory...
2014-10-15 12:23:22 Fetching ContentDir from registry store
2014-10-15 12:23:22 Value is C:\WSUS
2014-10-15 12:23:22 Fetching group SIDs...
2014-10-15 12:23:22 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:22 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:22 Fetching WsusReportersSid from registry store
2014-10-15 12:23:22 Value is S-1-5-21-308464661-3380577483-199018475-1001
2014-10-15 12:23:22 Creating group principals...
2014-10-15 12:23:22 Granting directory permissions...
2014-10-15 12:23:23 Granting permissions on content directory...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Granting registry permissions...
2014-10-15 12:23:23 Configuring shares...
2014-10-15 12:23:23 Configuring network shares...
2014-10-15 12:23:23 Fetching content directory...
2014-10-15 12:23:23 Fetching ContentDir from registry store
2014-10-15 12:23:23 Value is C:\WSUS
2014-10-15 12:23:23 Fetching WSUS admin SID...
2014-10-15 12:23:23 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:23 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:23 Content directory is local, creating content shares...
2014-10-15 12:23:25 Creating share "UpdateServicesPackages" with path "C:\WSUS\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications) published
on this WSUS system."
2014-10-15 12:23:25 Creating share...
2014-10-15 12:23:25 Share successfully created
2014-10-15 12:23:25 Creating share "WsusContent" with path "C:\WSUS\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
2014-10-15 12:23:26 Creating share...
2014-10-15 12:23:26 Share successfully created
2014-10-15 12:23:26 Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
2014-10-15 12:23:27 Creating share...
2014-10-15 12:23:27 Share successfully created
2014-10-15 12:23:27 Finished creating content shares
2014-10-15 12:23:27 Stopping service WSUSService
2014-10-15 12:23:27 Stopping service W3SVC
2014-10-15 12:23:27 Configuring WID database...
2014-10-15 12:23:27 Configuring the database...
2014-10-15 12:23:27 Establishing DB connection...
2014-10-15 12:23:27 Checking to see if database exists...
2014-10-15 12:23:28 Database exists
2014-10-15 12:23:28 Switching database to single user mode...
2014-10-15 12:23:32 Loading install type query...
2014-10-15 12:23:32 DECLARE @currentDBVersion int
DECLARE @scriptMajorVersion int = (9600)
DECLARE @scriptMinorVersion int = (16384)
DECLARE @databaseMajorVersion int
DECLARE @databaseMinorVersion int
DECLARE @databaseBuildNumber nvarchar(10)
IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
BEGIN
SELECT 1
END
ELSE
BEGIN
SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
SET @databaseBuildNumber = (SELECT BuildNumber FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
DECLARE @delimiterPosition INT = CHARINDEX('.', @databaseBuildNumber)
IF (@delimiterPosition = 0)
BEGIN
RAISERROR('Invalid schema version number', 16, 1) with nowait
return
END
SET @databaseMajorVersion = SUBSTRING(@databaseBuildNumber, 1, @delimiterPosition - 1)
SET @databaseMinorVersion = SUBSTRING(@databaseBuildNumber, (@delimiterPosition + 1), (10 - @delimiterPosition))
IF @currentDBVersion < 926
BEGIN
SELECT 3
END
ELSE
BEGIN
IF (@scriptMajorVersion > @databaseMajorVersion OR
(@scriptMajorVersion = @databaseMajorVersion AND @scriptMinorVersion > @databaseMinorVersion))
BEGIN
SELECT 2
END
ELSE IF (@scriptMajorVersion = @databaseMajorVersion AND
@scriptMinorVersion = @databaseMinorVersion)
BEGIN
SELECT 0
END
ELSE
BEGIN
SELECT 4
END
END
END
2014-10-15 12:23:32 Install type is: Reinstall
2014-10-15 12:23:32 Creating logins...
2014-10-15 12:23:32 Fetching account info for S-1-5-20
2014-10-15 12:23:32 Found principal
2014-10-15 12:23:32 Found account
2014-10-15 12:23:32 Got binary SID
2014-10-15 12:23:35 Fetching WsusAdministratorsSid from registry store
2014-10-15 12:23:35 Value is S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:35 Fetching account info for S-1-5-21-308464661-3380577483-199018475-1000
2014-10-15 12:23:35 Found principal
2014-10-15 12:23:35 Found account
2014-10-15 12:23:35 Got binary SID
2014-10-15 12:23:35 Setting content location...
2014-10-15 12:23:35 Fetching ContentDir from registry store
2014-10-15 12:23:35 Value is C:\WSUS
2014-10-15 12:23:40 Swtching DB to multi-user mode......
2014-10-15 12:23:47 Finished setting multi-user mode
2014-10-15 12:23:47 Writing DB settings to registry...
2014-10-15 12:23:47 Marking PostInstall done for UpdateServices-WidDatabase in the registry...
2014-10-15 12:23:47 Starting service W3SVC
2014-10-15 12:23:47 Configuring IIS...
2014-10-15 12:23:47 Start: ConfigureWebsite
2014-10-15 12:23:51 System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_AdsObject()
at System.DirectoryServices.PropertyValueCollection.PopulateList()
at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
at Microsoft.UpdateServices.Administration.UseCustomWebSite..ctor()
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Fatal Error: The system cannot find the path specified.

2014-10-15 12:23:47 Start: ConfigureWebsite
2014-10-15 12:23:51 System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
Looks like it failed trying to setup the website.
2014-10-15 12:23:27 Configuring WID database...
2014-10-15 12:23:27 Configuring the database...
2014-10-15 12:23:27 Establishing DB connection...
2014-10-15 12:23:27 Checking to see if database exists...
2014-10-15 12:23:28 Database exists
This also looks like its a RE-installation of WSUS.
Any chance the "WSUS Administration" v-root is already present and did not get deleted after the last uninstallation?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

SAP NetWeaver 7.01 SR1 ABAP Trial Version Installation Fails

Hello,
While doing SAP NetWeaver 7.01 SR1 ABAP Trial Version Installation, I am getting below error message:
~
An error occurred while processing option SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BlackICE' does not exist on the 'localhost' host.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/.
~
I have checked regedt32 and found the entry 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BlackICE' which is having detail (Default) REG_SZ (Value not set). When I double click on (Default) it says "Can not edit: Error reading the value's content"
~
In Services, "BlackICE" service is "Started" and Statup Type is "Automatic" and Logon As "Local System".
I have Microsoft Windows XP Professional Version 2002 Service Pack 2 and 3 GB RAM. I am using user which is part of "Administrator" group.
Can someone help what could be the issue and how I can resolve it so that can complete the Installation.
Appreciate your great help.

Hi Pedro,
could you fix the error?
I'm installing and I have the same problem.
An error occurred while processing option SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Archivos de programa/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/.
Thanks.
Anibal

SR1 Trial version - Runtime error in Webdypro application

Hello Experts,
I have installed SR1 Netweaver trial version on my Laptop. It's running on xp professional. I get following error when I run a webdynpro application. I found a thread with similar error but I am not sure what I need to put in my host file. When I installed the Trial version I did not specify a Domain name.
This is the error.
The URL http://k002:8000/sap/bc/webdynpro/sap/z_hello_world was not called due to an error.
Note
The following error text was processed in the system NSP : Die URL enthält keine vollständige Domainangabe (k002 statt k002.<domain>.<ext>).*
The error occurred on the application server k002_NSP_00 and in the work process 0 .*
The termination type was: RABAX_STATE*
The ABAP call stack was:*
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Thanks in advance.
Vik

Following from Serdar Simsekler, in one of the forum questions helped to solve my problem.
Hi again I hit other problems and here is how I solved them. As mentioned in my earlier thread I have installed the NW 7.01 trial version. At the installation, I unchecked the FQDN option as I did not know what to input there. After this succesfull installation, last night I tried to test a web dynpro application and it failed to show in the browser. At first, it did not even bring the logon screen saying the service was not reachable and mentioning error code '403-Forbidden'. Then I started the webgui services and web dynpro services using SICF. I can not remember which services I started (I mean I do not know which ones were already started), so here is a list of services which you may need to check and activate:
default_host/sap/public/bc/* default_host/sap/public/icf_info/* default_host/sap/public/icman default_host/sap/public/myssocntl default_host/sap/bc/echo/* default_host/sap/bc/error/* default_host/sap/bc/gui/* default_host/sap/bc/graphics/* default_host/sap/bc/wdvd default_host/sap/bc/webapp default_host/sap/bc/webdynpro/* (I guess you can also choose only the applications you wish to run)
Then the logon page came and let me to input user account details via popup. However, after I logon I got another error saying there was something wrong with some template, syntax error and RABAX_STATE, bla bla... And when I tried to test my simple web dynpro it was giving an internal error, hence not showing the web application. I knew I had this second problem because I had not set a fully qualified domain name. The solution was changing the profile parameter icm/host_name_full. But I was not a BASIS guy. I tried transactions RZ10, RZ11 but could not manage to change the parameter. Then I risked and changed the profile files in the Windows directory. I know this is not a robust way to do this but I tried creating profiles, etc. but could not do it. If someone else can explain the "normal" way, would be appreciated. Using Notepad, I added the line
icm/host_name_full = XXYYZZ.acme.com
(here replace XXYYZZ with your host name. Possibly this is the value in the parameter SAPLOCALHOST (can display the value using txn RZ11)) in the profile files located at D:usrsapNSPSYSprofileNSP_DVEBMGS00_SSPC001 and D:usrsapNSPSYSprofileDEFAULT.PFL . (Your files might be located in another drive) Also, I added a new line to my hosts file (i.e. C:WindowsSystem32driversetchosts) using Notepad:
127.0.0.1 XXYYZZ.acme.com
(You might need to change 127.0.0.1 with the IP of the loopback adapter if you used it. I am not sure though. And "acme.com" is just a random domain name, you can use any domain name which complies with [FQDN specs|http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm] but I recommend using this, simply because this works.) Then, I restarted the SAP server. I tried the web gui but it was still problematic saying the aforementioned error arguments. And I searched for a solution. I found [this|ITS_CANT_LOAD_INCLUDE ( RABAX_STATE ); thread. Then I re-published the internet services SYSTEM, IAC and WEBGUI (thanks Edgar Chuang) using the txn SE80. I tried web GUI and it is fine now. I tested my web dynpro application and it works now. So, I am happy. Hope I will not hit any more problems and hope this helps to others. *--Serdar

Update CE SR1 to CE SR3 trial version

Similar Messages

Maybe you are looking for