Update Command is not working.

Hi,
There are 15 fields in the database table. The first 5 fields are set as primary keys. In the table, only the first field has got unique values. In the next 4 primary keys the values are getting repeated.
Now, i am trying to modify the 10th field using Update Command.
I have written the below command.
Updated ZOMT_PROCESS using WL_INITIAL_VALUES.
The record is not getting modified in the database table with the values of the work area WL_INITIAL_VALUES.
What could be the problem?

Hi,
Move all the modifiable work area fields to an Internal table and modify the ztable.
Use the following syntax
LOOP AT i_selected_rows INTO w_selected_rows.
    READ TABLE itab INTO wa INDEX w_selected_rows-index.
    IF sy-subrc EQ 0.
      MOVE-CORRESPONDING wa TO w_modified.
      APPEND w_modified TO i_modified.
    ENDIF.
ENDLOOP.
MODIFY zzzmaterial FROM TABLE i_modified.
Regards
Bala Krishna

Similar Messages

After full system update ppp does not work anymore

Well, I have this problem:
1) I install Arch Linux from the latest Core
2) I manually install the latest versions of wvdial and its dependences (xplc and wvstreams). This is an offline installation (because I can't set up internet without wvdial. So I save these packages on USB drive, and there I lanch pacman -U *.pkg.tar.gz)
3) I set up my GPRS internet connection (I use a mobile phone)
Everything works well (i.e.: I can ping google without problem).
Problems arise if I decide to update my system. In this case, indeed, after updating and rebooting, my connection doesn't work no more. Everything works fine until I update. After update, I can say hello to my ppp.
Then, I add some some details.
These are the last lines of messages.log after a successful connection (i.e.: before the full update of my system)
pl2303 4-2:1.0: pl2303 converter detected
usb 4.2: pl2303 now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303: prolific pl2303 USB to serial adaptor driver
PPP generic driver version 2.4.2
NET: registered protocol family 10
lo: disabled privacy extensions
pppd 2.4.5 started by root, uid 0
using interface ppp0
connect ppp <-> /dev/ttyUSB0
PAP authenticate suceed
PPP BSD compression module registered
PPP deflate compression module registered
local IP address ...
remote ID address ...
primary DNS address ...
secondary DNS address ...
The last lines of messages.log after the update are:
pl2303 4-2:1.0: pl2303 converter detected
usb 4.2: pl2303 now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303: prolific pl2303 USB to serial adaptor driver
PPP generic driver version 2.4.2
NET: registered protocol family 10
lo: disabled privacy extensions
pppd 2.4.5 started by root, uid 0
As you can see, it's seems there are problems in "using ppp0 interface". Indeed, pppd starts, but ppp0 interface not. I can also add that ifconfig ppp0 up and similar commands do not work (ppp0: no such device, or something like that).
So, what can I do?

I don't use ppp so this is just a guess. However, after a recent upgrade I saw a message from pacman:
[2010-02-14 09:07] >>> The kernel-mode plugin has a new place.
[2010-02-14 09:07] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
[2010-02-14 09:07] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[2010-02-14 09:07] upgraded rp-pppoe (3.10-2 -> 3.10-4)
Could this be the problem?
Last edited by loafer (2010-02-23 20:01:29)

Shift+command+b not working for bold

I just updated to cs6 and my "bold" key command is not working. (shift+command+b on mac) I am using a font that has BOLD. I can select bold from the character palette and it works fine but the key command will not work. I checked my key command list and is there by default. It should work. It worked fine on cs5 for me. I even tried holding the fn key but no dice. Any ideas? I have to bold many many items so I can not possibly use the character palette....thanks.

"Nope" the first word of my response, was to your question. It means No. Meaning "No I did not copy a custom set". I am using default set.
I wonder if some other app has taken that kb shortcut. Nothing happens when I press it though....and I wouldnt know how to find out.
edit - problem solved. Even though the font says that it has a bold face I guess that it does not. Bold still works fine for other fonts. Sorry for your time.
Message was edited by: Emperor1212 - Problem solved.

SQL*Plus COPY command does not work

SQL*Plus COPY command does not work in SQL Developer. I am using SQL Developer 1.5.1 on Windows XP.
copy from <source_db_connection> to <target_db_connection> create <target_tab_name> using select * from <source_tab_name>
Does it work on different versions of SQL Developer ?
Anyone had any success in trying COPY command in SQL Developer?
Thanks in advance.

While it hasn't been updated for v1.5, this page lists the supported SQL*Plus commands. COPY is explicitly listed as not supported.
theFurryOne

After doing a widows update itunes will not work at all

after doing a widows update itunes will not work at all

hiya!
I get the itunes has encounterd a problem and needs to close, sorry for the inconvenience error, no specific error number. I do not have QT installed,
not having QT installed is what will be causing your itunes error message at the moment. let's try a careful standalone QT 7.1 install.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

Host command is not working on linux

Hi
I m using linux for application server n windows for client. I need to create folder from client machine by cliking a button of forms10g runtime.HOST command is not working which was working fine in windows.
Any help is appriciateable.
kazi mokarem

Hi
I had the same issue on linux a few weeks back. What tuned out was, when you install the Oracle app svr it does not include the system paths by default.
The path where mkdir is located may not be visible to the app.
Try to hardcode the path for mkdir as /bin/mkdir .... and seee if that works.
If the above statement works then add that path in the paths variable in default.env file located in $ORACLE_HOME/forms/server directory
HTH
Arvind

Update process does not work on Tabular Form

Hello,
I have 2 tabular forms on one page, which are using manual update processes.
First form is created using wizard, and therefore works perfectly.
The update process is as follows:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Second form is created manually, using the following code:
SELECT apex_item.checkbox (30,
                           '#ROWNUM#',
                           'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
                           NULL,
                           'f30_' || '#ROWNUM#'
                          ) delete_checkbox,
       CATALOG_ID,
          apex_item.hidden (31, CATALOG_ID)
       || apex_item.text (32,
                          LANG,
                          80,
                          100,
                          'style="width:100px"',
                          'f32_' || '#ROWNUM#'
       || apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
       apex_item.text (34,
                       DESCRIPTION,
                       80,
                       100,
                       'style="width:255px"',
                       'f34_' || '#ROWNUM#'
                      ) DESCRIPTION
FROM V_CATALOGS
UNION ALL
SELECT     apex_item.checkbox
                          (30,
                           TO_NUMBER(9900 + LEVEL),
                           'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
                           NULL,
                           'f30_' || TO_NUMBER (9900 + LEVEL)
                          ) delete_checkbox,
           NULL,
              apex_item.hidden (31, NULL)
           || apex_item.text (32,
                              NULL,
                              80,
                              100,
                              'style="width:100px"',
                              'f32_' || TO_NUMBER (9900 + LEVEL)
           || apex_item.hidden (33, NULL) LANG,
           apex_item.text
                                           (34,
                                            NULL,
                                            80,
                                            100,
                                            'style="width:255px" ' ,
                                            'f34_'
                                            || TO_NUMBER (9900 + LEVEL)
                                           ) DESCRIPTION
      FROM DUAL
     WHERE :P18_TEMP = 'ADD_ROWS1'
CONNECT BY LEVEL <= 1However, the update process does not work on this form.
I created it using the first one as an example, but with the id's of the second form:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Also, both forms are opening in a modal pop-up dialog window.
I use a Dialog Region plug-in for that.
Please advise, what is causing a problem with update?

Sloger,
if this is your tabular form
SELECT apex_item.checkbox (30,
...and this is your update statement
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
Thanks,
Tyson Jouglet

External command is not working in File Receiver Adapter

Hi,
   I have tried to copy the file which is mentioned in my File Adapter (Receiver) to 3 different folders thru OS command. The purpose is to save time. I have created one CC for Source(File) and one CC for target(File). After the target file is created, I want to copy this file in 3 folders. For this I have written one batch file in my system.
File Name: copy1.bat
@ECHO OFF
COPY %1 C:\TEST1\arch_t1
COPY %1 C:\TEST2\arch_t2
COPY %1 C:\TEST3\arch_t3
DEL %1
The command which I entered in the Receiver CC (File Adatper is)
Run Operating System Command After Message Processing
Command Line: C:\FILES\copy1.bat %F %f
Timeout(secs): 60
Terminate Program After Timeout - Check box is selected.
But, this external command is not working. (because the target files are not created in those directories C:\TEST1, C:\TEST2, C:\TEST3)
   I did this scenario by refering the Michael'w weblog:
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
   In this blog, he has also given how to troubleshoot external command. I tried this also. It is not working.
    I use Windows XP OS. XI 3.0 SP 18.
   Friends, Could you kindly tell why this external command is not working? What could be the problem?
Thanks in advance.
Kind Regards,
Jeg P.

Hi, Jeg.
As the note says, please check the java Runtime.exec behavior
with the proper user.
If in doubt, check if the command can be successfully run through
the Java Runtime.exec(...) API. Also note that the command is run
as user "<sid>adm" (Unix) / "SAPService<SID>" (Windows).
So, Could you check the following(very dirty one!) Java in your
XI server and check if it works? For simulating %F, create a test
file C:\FILES\test.txt whatever the content is.
import java.util.*;
import java.io.*;
public class ExecJava {
public static void main(String args[]) {
    try {
      Runtime rt = Runtime.getRuntime();
      Process proc = rt.exec("C:/FILES/copy1.bat C:
FILES
test.txt");
    } catch (Exception e) {
      e.printStackTrace();
Good Luck.
Sejoon

Why export audio to movie command not visible and detect cuts command is not working in 64bit mode?

Does anyone know why export to audio disappear from menu in 64bit mode?
Why detect cuts command is not working well in 64 bit mode?
I tested on several machines (brand-new iMac, brand-new MacPro with 10.8 OS, MacPro with 10.6.8),and everythig wotks in 32 bit mode. As I switch to 64 bit mode detect cuts only put one marker at the begening of film.
I also noticed that Firewire output option in 64bit mode is not avaible.
Is there a certain film format that I have to use to make it work? I tried DV PAL, but I had ther same result.
Thanks a lot.

Hi
Those functions are not available when Logic is running in 64bit mode
http://support.apple.com/kb/TS3171
CCT

"Some updateing commands could not be generated ....." error

Hi all,
I am accessing an Oracle server on which I have READ ONLY rights. I am trying to create a DataSet. When I do so, I get an error:
Some updating commands could not be generated automatically. The database returned the following error:
This object has been deleted.
1) Is this just because my access is readonly?
2) A different message might be preferred ("code to submit updates was not created due to limited user rights" or some such.
3) Can I use this even with the error or will I have other problems because the process did not complete correctly?
Thanks,
JustMe

Can't remember how I solved this, but it is solved.

6120 classic:My voice commands do not work

Please help.
Don’t know if I'm just being stupid or there is something not right with my 6120c.
My voice commands do not work.
If I press the button for a voice command, it says that there are no voice tags saved.
If I go into the voice command application (Which should create the voice tags on opening), I cant playback the voice tags, its give a 'voice system error' error message.
Is there something that is not set up properly? In the voice command settings, the synthesizer is 'on'?
Also, I don’t have voice tags on my contacts??
I read somewhere that this is a firmware problem and the phone should be taken back to nokia. Is this the case?
Somebody please help.

I formated my nokia n6120 using the code *#7370#. It deletes !everything! (settings, aplications...), but I have no voice sytem error now.

Java command still not working - please help

i have installed jdk1.6.0_05. The javac command works fine but the java command does not work at all. even when i try java HelloWorld i receive this exception message
Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld
Caused by: java.lang.ClassNotFoundException: HelloWorld
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
please help (you to SUN)!!

bart@kerberos:~$ javac -help
Usage: javac <options> <source files>
where possible options include:
-g                         Generate all debugging info
-g:none                    Generate no debugging info
-g:{lines,vars,source}     Generate only some debugging info
-nowarn                    Generate no warnings
-verbose                   Output messages about what the compiler is doing
-deprecation               Output source locations where deprecated APIs are used
-classpath <path>          Specify where to find user class files and annotation processors
-cp <path>                 Specify where to find user class files and annotation processors
-sourcepath <path>         Specify where to find input source files
-bootclasspath <path>      Override location of bootstrap class files
-extdirs <dirs>            Override location of installed extensions
-endorseddirs <dirs>       Override location of endorsed standards path
-proc:{none,only}          Control whether annotation processing and/or compilation is done.
-processor <class1>[,<class2>,<class3>...]Names of the annotation processors to run; bypasses default discovery process
-processorpath <path>      Specify where to find annotation processors
-d <directory>             Specify where to place generated class files
-s <directory>             Specify where to place generated source files
-implicit:{none,class}     Specify whether or not to generate class files for implicitly referenced files
-encoding <encoding>       Specify character encoding used by source files
-source <release>          Provide source compatibility with specified release
-target <release>          Generate class files for specific VM version
-version                   Version information
-help                      Print a synopsis of standard options
-Akey[=value]              Options to pass to annotation processors
-X                         Print a synopsis of nonstandard options
-J<flag>                   Pass <flag> directly to the runtime systemSee the bold part.
More information: [http://java.sun.com/docs/books/tutorial/java/package/managingfiles.html]

Command S not working in Dreamweaver CS6

Command S not working in Dreamweaver CS6

Every time I've run into an issue like this, clearing the cache file has repaired it...
http://forums.adobe.com/thread/494811
As long as it's not a system wide issue that is.

Some commands are not working nor in illustrator nor photoshop, any advice better than Adobe?

Illustrator is not fuctioning at 100%, some commands do not work ( eg - command open, nor place etc ) and same with photoshop....
Any advice

pcmyhre,
You may try the list, possibly starting with item 7) in 5), which is a list of the usual suspects, which may disturb and confuse Illy so she fails to do even simple things.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Ctrl-T command do not work in website with flash

Ctrl-T command do not work in website with flash
== URL of affected sites ==
http://

If the Flash object has focus then key presses are processed by that plugin.
In such cases you need to click outside that plugin (e.g. the menu bar if you can't click on the website) to make the keyboard work.

Update Command is not working.

Similar Messages

Maybe you are looking for