Update connection proxy only listening on interface 127.0.0.1

I have installed S10 6/06 on an e450 and have added the patchserver patch/packages.
Configured the patchserver and registered it with sun update connection.
I can get the e450 to download and cache patches if I set the update proxy URL to
"http://localhost:3816/solaris." and run updatemanager to download and apply patches.
BUT If I change the URL to "http://e450-1:3816/solaris" I get "! Error:Unable to download
document: "collection/default" Cannot connect to retrieve collection/default: Bad Gateway"
e450-1 is this hosts name. I get the same result if I use the fully qualified hostname.
Of course I get the same error when I attempt to patch a local client using the local proxy.
This suggests that proxy server is only binding to the 127.0.0.1 interface and not the other
network interfaces. Any suggestions where to look for errors etc / how to correct the configuration of the server?
e450-1> smpatch get
patchpro.backout.directory "" ""
patchpro.download.directory /var/sadm/spool /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source http://localhost:3816/solaris/ https://getupdates1.sun.com/solaris/
patchpro.patchset - current
patchpro.proxy.host webgate.canterbury.ac.nz ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port 3128 8080
patchpro.proxy.user agw50 ""
root@e450-1> patchsvr setup -l
Patch source URL: https://getupdates.sun.com/solaris/
Cache Location: /var/sadm/spool/patchsvr
Web proxy host name: webgate.canterbury.ac.nz
Web proxy port number: 3128
Web proxy user: *****
If

No all interfaces are configured correctly - they work for all other applications.
For the record
/etc/inet/
root@e450-1> ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 132.181.20.12 netmask ffffff00 broadcast 132.181.20.255
ether 8:0:20:87:b2:41
qfe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 192.168.23.2 netmask ffffffe0 broadcast 192.168.23.31
ether 8:0:20:93:54:18
/etc/inet/
root@e450-1> more /etc/hostname.*
/etc/hostname.hme0
e450-1
/etc/hostname.qfe0
e450-1e
/etc/inet/
root@e450-1> m ipnodes
# Internet host table
::1 localhost
127.0.0.1 localhost
132.181.20.12 e450-1 loghost
192.168.23.2 e450-1e
/etc/inet/
root@e450-1> m hosts
# Internet host table
127.0.0.1 localhost
132.181.20.12 e450-1 loghost
# 192.168.23.0/27
# netmask 255.255.255.224|ffffffe0
#192.168.23.0-31
192.168.23.1 ue2s-0b #qfe0
192.168.23.2 e450-1e
192.168.23.3 e220-0a
192.168.23.5 daktari-e
192.168.23.6 v440-0-e
192.168.23.9 v100-0e
192.168.23.10 netra-0a
192.168.23.12 e450-0f
192.168.23.13 intel460
192.168.23.14 netgear7224
192.168.23.15 blackbox
192.168.23.17 v210-0-e
192.168.23.18 se3310
The only app that is unaware of the hme0/qfe0 interfaces is the http patchsvr.
Allen

Similar Messages

Update Connection Proxy with temporary internet connection

Hi,
I have a lot of systems which are not allowed to connect to the internet - and even are not allowed to connect to a system, which is connected to the internet.
Is it possible to connect the Update Connection Proxy only temporary to the internet, to download the patches. Then disconnect it and connect it to the clients to do the update on the clients.
Or is a internet connection required during the update.
Regards,
Hans-Juergen

It is not possible to use smpatch/updatemanager in a disconnected environment regardless of whether or not a Sun UC Proxy (aka LPS) is being used.
The reason is that there will be no way to get the data to the disconnected environment. All of the LPS download mechanisms are driven by demand from a client; there are no mechanisms for bulk downloading data which has not been requested.
So unless your clients are able to connect to the LPS while it is temporarily connected to the internet, Sun UC will not work for patching your clients.
Your best option at present would be to use patch clusters or to look into the Sun Connection 1.1.1 or xVM Ops Center software.
Edited by: ForumModerator on 03-Mar-2008 22:02

Does update connection proxy store patches for other servers

I have following set-up ( all running sol 10 )
Server A : E250 , has connection to internet. runs update connection proxy and update manager.
update manager uses update connection proxy on the same server to get sun patches. This server is registered on SUN web site.
Server B: V440 NO connection to internet , runs update manager which connects to update connection proxy on SERVER A.
Suppose a patch becomes available for a Sun Driver that I have installed on SERVER B but NOT on SERVER A .
Will the update connection proxy running in SERVER A download the patch for that driver and pass it to SERVER B update manager to be applied ? Altough SERVER A does not need that patch ?
I would expect the answer to this to be YES , otherwise I do not see any value of running update connection proxy !!
Is anyone able to answer this ??
Thanks

Yes - The primary purpose of the Sun Update Connection Proxy is to provide patches to machines (like Server B) which cannot directly reach the internet.
In a nutshell, you should see no difference in the behaviour of Update Manager on Server B when pointing it directly at Sun, and pointing it at a Sun Update Connection Proxy that in turn points to Sun.
What will happen is:
Server B: will run analysis against the full patch set, and decide which patches are applicable to Server B. It will recommend any patch that meets the appropriate criteria for Server B. If a patch is recommended, you can select it for installation, and Server B will then request the patch from Server A, if Server A doesn't happen to have this patch already, it will in turn "proxy" this download from Sun, cache the patch and return it to Server B.
Hope this helps,
-ethan

How Sun Update Connection Proxy really works

Hi,
Apolgies if this question is in the FAQ, but the FAQ link in the header text of this forum gives me a 404.
I've been trawling the docs on Sun Update Connection Proxy and trying to understand how it works with regards caching. The docs are quite detailed in how to set it up, for example how to point to a proxy using http://<proxy-name>:3816 etc., and how to install patchsvr and how to start it.
What seems to be missing from the manuals IMHO (and this all might become blatantly obvious once I've been using it a while) is any details on how the smpatch update process works end-to-end through a proxy, e.g. I know how to change the cache location using the patchsvr command but how and when is anything stored in that location? What are all the files and directories that reside under /var/sadm/spool, and how many of these relate to a proxy (LPS) server?
Is smpatch supposed to clear out the .jar files in there or do I need to set up a job to do that regularly?
Hope someone can point me in the right direction.

Inside /var/sadm/spool there are several directories, I won't describe all of them, but for most purposes this should be enough:
Client:
/var/sadm/spool/cache/Database - stores patchsets (current2, etc)
/var/sadm/spool/cache/xml - stores the MoTD files
/var/sadm/spool/cache/entitlement - stores the entitlement file (note this is generated by the server on each request)
/var/sadm/spool/cache/updatemanager/analysis.results - if you have the swupAuto cron job, this directory is used to hold analysis to speed up UM launch
/var/sadm/spool/cache/ReadMe - holds the patch readme's (mostly for use with UM)
/var/sadm/spool/cache/collection - holds a file containing information about available patchsets
/var/sadm/spool/cache/category - holds a file describing the types of patches (currently Update Tools, Security, Recommended, and Generic)
/var/sadm/spool/sunucLog - holds job_history.log
Proxy:
/var/sadm/spool/patchsvr - this holds all files required for analysis and patches with URL-encoded filenames, the files used to be stored in a more hierarchical directory structure, but this changed a few patch revisions ago.
As for cleaning, in general it is safe to delete all files under /var/sadm/spool/cache/ as all of the patches are stored at /var/sadm/spool/ and most other files should be replaced on a regular basis automatically, however you may want to remove all of the patches too once you have completed your patching sessions - this is not done automatically. On the proxy you might not want to be so thorough - you would normally want to keep the patches (or at least keep the most recent ones - 180 days in this example):
# cd /var/sadm/spool/patchsvr
# ls | grep -v all_signed | xargs rm
# find /var/sadm/spool/patchsvr/ -mtime +180 -exec rm {} \;Does this answer your questions, or do you need further explanation?

Use VPN connection as a listen network interface in Web Application proxy

I have a test environment: domain in hyper-v with Sharepoint and Office Web Apps servers (all under Windows 2012 - Windows 2012 R2).
Because my home ISP does not permit some inbound ports (80,443) in a gate machine (under Windows 2012 R2) I create a vpn connection (by "setup a new connection or network") to my outside vpn server. On this vpn server the ports forwarding is configured
and work fine (f.e. default IIS site is visible).
I try to public my Sharepoint 2013 Foundation in Internet over this vpn connection and faced with the problem - WAPx (Web application proxy) does not bind to this vpn connection, only to traditional network interfaces.
The question is how to make listening WAPx the VPN interface?

Hi,
Thank you for posting in Windows Server Forum.
Please check beneath thread and article might helpful in your case.
Configure a reverse proxy device for SharePoint Server 2013 hybrid
http://technet.microsoft.com/en-us/library/dn607304(v=office.15).aspx
Forcing VPN users through a proxy
http://social.technet.microsoft.com/Forums/en-US/5a6a502d-4583-4c51-8486-3af982ba92da/forcing-vpn-users-through-a-proxy?forum=winserverNIS
What’s New in 2012 R2: People-centric IT in Action - End-to-end Scenarios Across Products
http://blogs.technet.com/b/in_the_cloud/archive/2013/07/17/people-centric-it-in-action-end-to-end-scenarios-across-products.aspx
Hope it helps!
Thanks,
Dharmesh

Sun Update Connection Proxy

Hello all!
I have a local Patchserver, configured like this:
patchsrv setup -l
Patch source URL: https://getupdates.sun.com/solaris/
Cache Location: /var/sadm/spool/patchsvr
Web proxy host name: ip-address-of-proxy
Web proxy port number: port-of-proxy
And a Patchmanager refering to it:
smpatch get
patchpro.backout.directory - ""
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source http://ip-address-of-patchserver:3816/solaris/ https://updateserver.sun.com/solaris/
patchpro.patchset - patchdb
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
patchpro.sun.passwd **** ****
patchpro.sun.user - ""
smpatch analyze produces the following:
Cannot connect to retrieve detectors: Server returned HTTP response code: 500 for URL: http://ip-address-of-patchserver:3816/solaris/
can anybody help me?
Thanx in advance

The problem is that whilst what Barry Greenberg originally published would have worked at the time (after the reader had gone to the trouble of correcting a few errors), the feature itself was broken shortly afterwards by a newer revision of the patch. As of this time the tools to develop custom baselines have not been and will not be created in the current form of Sun UC software.
The feature to create custom is available in the Sun Connection (formerly Sun UCE, or Aduva) and may be a feature of smpatch/updatemanager in the future, but we are not in a position to be able to tell you as we at this time do not know.
We have actually been campaigning to have this document removed or updated since the beginning of the year, originally due to the errors, but later as a result of major changes that completely broke the previously 'undocumented' feature. The page was meant to have been removed late yesterday in a maintenance push on the BigAdmin site, but as you are aware this has not happened.
Please disregard the document.

Sun Update Connection

I have several hundred Solaris 10 boxes (with a current Sun support contract) on an internal (i.e. isolated from the Internet) network. I would like to set up a Sun Update Connection proxy for Solaris patches only. Is it possible to download (and periodically update) the files needed for the proxy server (patches, database, etc.) using a web browser by hand? Moving the proxy server between the Internet and the internal network is not possible.

Thanks. The "Enterprise edition Sun Connection" is the same as "Sun Connection-Customer Satellite", correct? If so, am I also correct that, although the Solaris 10 Update Channel is included with my support contract, the Satellite software needs to be purchased separately?

Welcome to the Sun Update Connection forum.

Welcome to the Sun Update Connection forum. Sun Update Connection services lets you analyze and update your systems and stay up to date from anywhere-while providing easy access to patches and software updates. The Sun Update Connection, System Edition incorporates a number of exciting features. These features* include access to all Solaris 10 software updates (security fixes, device drivers, recommended updates and feature updates) through the following update mechanisms:
� Sun[sm] Update Manager � A client-side application with a graphical user interface (GUI) and command-line interface (CLI) for locally managing updates on your system
� Sun[sm] Update Connection - Sun-hosted Web application for remotely managing updates on one or more of your systems
� Update Connection Proxy - A local caching proxy server which serves updates from Sun to the client systems that are inside your enterprise security domain. (requires use of Sun Update Manager.)
� SunSolve Patch & Updates Portal - A venue for downloading patches and obtaining patch readme's
For more information about these tools, please see the following documentation:
- Sun Update Manager 1.0 Administration Guide
- Sun Update Connection 1.0 Administration Guide
- smpatch(1M) man page
- patchsvr(1M) man page
- Sun Update Connection, System Edition 1.0 Preview
Release: Installation Guide and Release Notes
* Please note that in the future, some features will require a valid Sun Service Plan. Please see the "Get Started" Page for more information.
http://www.sun.com/updateconnection/getstarted
You can also access a Frequently Asked Questions (FAQ) document from the Sun Update Connection services web application by clicking Help or directly at
http://www.sun.com/service/sunupdate/faq.html
And of course, you can post questions here on the Sun Update Connection forum and we will do our best to respond.
Happy updating,
Sun Update Connection Offering Team

.

I can only listen to music in iTunes when i'm connected to the internet. Everything seems to have uploaded onto iCloud - something I didn't sign up for. Happened with the latest iTunes update. Help!

I can only listen to music in iTunes when i'm connected to the internet. Everything seems to have uploaded onto iCloud - something I didn't sign up for. Happened with the latest iTunes update.
All of the music is still on my computer, but when I play it through iTunes, it either buffers first (when I'm connected to the internet) or it is greyed out (offline) and I can't listen to it.
This is beyond annoying. Is there anything I can do to sort this out?
Cheers.

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Check out the following KB Articles: http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer

HT4061 my phone failed to update and now only shows symbols to connect to itunes but wont connect. suggestions?

my phone failed to update and now only shows symbols to connect to itunes but wont connect. suggestions?

Put the device in DFU mode (google it) and restore.

IPod update and proxy

Hello!
I have a proxy-only connection. Does this mean that I won't be able to get the iPod updates? iTunes 7.02 cheerfully reports that there is an iPod update, but then it is unable to download it.
I am NOT ABLE to connect without a proxy.....
Mac-mini G4 Mac OS X (10.4.8)

The message says the following:
==================================
iTunes could not contact the iPod software update server because you are not connected to the Internet
Make sure your Internet connection is active and try again
==================================
The facts are:
1) I browse whatever sites including the iTunes store
2) Apple software update works perfectly
3) I can even listen to the iTunes radiostations and use Skype voice calls
but, still, when trying to update the iPod, it says "...you are not connected to the Internet..."!!?
Mac-mini G4 Mac OS X (10.4.8)

Sun Update Connection Client 1.0.8 now available

The Sun Update Connection System client, version 1.0.8 is now available as
software update 121118-08 (SPARC) or 121119-08 (x86). Version 1.0.8
is the biggest update we have produced since the initial release of the Sun Update
Connection and includes the following enhancements:
o Sun Update Manager has a brand new user interface which includes a new
look and icons, numerous usability improvements such as better progress
reporting and the ability to print/save installed and available patch lists and
patch README files.
o Support for Solaris Live Upgrade so patches can be added to an inactive
alternate boot environment.
o The Solaris 10 SMF configuration framework is now used to trigger the
installation of patches with special handling requirements (single user mode
or restart-after required) which will improve compatibility and reliability.
o The version 1.0.8 client uses a new Sun-hosted patch server that outsources
content delivery to Akamai. This enables us to provide superior download
performance to our customers worldwide.
For a complete list of the defects corrected in this release please
refer to the patch README file for this patch. Note also that this
update includes fixes that were delivered in prior releases of the
Sun Update Connection client software patch. By installing this update
you may be getting fixes that were previously available but not present
on your system.
Sun Update Connection Hosted application has been refreshed to include
numerous user interface adjustments and fixes that have been suggested by a
customer focus group usability study. Although there are no new features,
the usability of the product is substantially improved.
Thank You,
Sun Update Connection Team

On the SunStudio Patches - I dont believe that this will be fully fixed since part of the problem is the patches themselves. I however do not have access to a SunStudio installed test system at present so I'd be interested to hear feedback from someone who has tried installing these through the SunUC 1.0.8 toolset
Fonts - I believe that greater flexibility will be coming in future releases. Work on the Update Manager gui is still ongoing
Patch server - Yes the SunUC proxy will use the new servers providing it has been upgarded to 1.0.8
Sun4u patch - This is an issue with the patch metadata being incorrect and not the toolset.

Linux下验证listener.ora配置loopback地址(127.0.0.1),client是否任然可以连接数据库

群里有朋友认为监听配置文件如果改为loopback（127.0.0.1）地址，client不能访问数据库的问题，做以下实验来验证
实验环境：
Linux （RHEL）5.5
Oracle Database 10g Release 2（10.2.0.5）
Linux oracle10g_primary 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:43 EDT 2010 i686 i686 i386 GNU/Linux
SQL> select * from registry$history;
ACTION_TIME                                                                      ACTION                         NAMESPACE                      VERSION                                ID COMMENTS
23-11月-12 05.30.56.431167 AM                                                  VIEW RECOMPILE                                                                                  8289601 view recompilation
23-11月-12 05.30.56.501303 AM                                                  UPGRADE                        SERVER                         10.2.0.5.0                                Upgraded from 10.2.0.1.0将listener.ora文件中的host从/1.1.1.2改为127.0.0.1（loopback）地址（删除192.168.70.203），测试client（1.1.1.1）是否任然可以连接数据库
[oracle@oracle10g_primary admin]$ vi listener.ora
# listener.ora Network Configuration File: /oracle/product/10.2/network/admin/listener.ora
# Generated by Oracle configuration tools.
PRIMARY =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.70.203)(PORT = 1521))      以前的Data Guard环境
      (ADDRESS = (PROTOCOL = TCP)(HOST = 1.1.1.2)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_PRIMARY =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /oracle/product/10.2)
      (PROGRAM = extproc)
    (SID_DESC =
      (GLOBAL_DBNAME = ora10)
      (ORACLE_HOME = /oracle/product/10.2)
      (SID_NAME = ora10)
#----ADDED BY TNSLSNR 24-OCT-2012 06:51:24---
PASSWORDS_LISTENER = E2DD162210C10912
#--------------------------------------------客户端连通性测试：
C:\Users\John>tnsping ora10_test_203
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 25-11月-
2012 21:41:50
Copyright (c) 1997, 2010, Oracle. All rights reserved.
已使用的参数文件:
D:\OracleCLT\product\11.2.0\client_1\network\admin\sqlnet.ora
已使用 TNSNAMES 适配器来解析别名
尝试连接 (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 1.1.1
.2)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ora10)))
OK (30 毫秒)接着我们将server端 listener.ora中HOST地址改为127.0.0.1（loopback)地址。
[oracle@oracle10g_primary admin]$ vi listener.ora
# listener.ora Network Configuration File: /oracle/product/10.2/network/admin/listener.ora
# Generated by Oracle configuration tools.
PRIMARY =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_PRIMARY =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /oracle/product/10.2)
      (PROGRAM = extproc)
    (SID_DESC =
      (GLOBAL_DBNAME = ora10)
      (ORACLE_HOME = /oracle/product/10.2)
      (SID_NAME = ora10)
#----ADDED BY TNSLSNR 24-OCT-2012 06:51:24---
PASSWORDS_LISTENER = E2DD162210C10912
#--------------------------------------------重新启动listener服务
[oracle@oracle10g_primary admin]$ lsnrctl reload
LSNRCTL for Linux: Version 10.2.0.5.0 - Production on 25-NOV-2012 13:30:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully查看监听状态：
[oracle@oracle10g_primary admin]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.5.0 - Production on 25-NOV-2012 13:30:57
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.5.0 - Production
Start Date                25-NOV-2012 13:14:52
Uptime                    0 days 0 hr. 16 min. 4 sec
Trace Level               off
Security                  ON: Password or Local OS Authentication
SNMP                      OFF
Listener Parameter File   /oracle/product/10.2/network/admin/listener.ora
Listener Log File         /oracle/product/10.2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle10g_primary)(PORT=1521)))
Services Summary...
Service "ora10" has 1 instance(s).
Instance "ora10", status READY, has 1 handler(s) for this service...
Service "ora10_XPT" has 1 instance(s).
Instance "ora10", status READY, has 1 handler(s) for this service...
The command completed successfully
本机双网卡，eth0:192.168.70.203   eth1:1.1.1.2
[oracle@oracle10g_primary admin]$ /sbin/ifconfig eth0
eth0      Link encap:Ethernet HWaddr 08:00:27:73:2D:E9
          inet addr:192.168.70.203 Bcast:192.168.70.255 Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fe73:2de9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b) TX bytes:6744 (6.5 KiB)
[oracle@oracle10g_primary admin]$ /sbin/ifconfig eth1
eth1      Link encap:Ethernet HWaddr 08:00:27:7F:F0:8A
          inet addr:1.1.1.2 Bcast:1.255.255.255 Mask:255.0.0.0
          inet6 addr: fe80::a00:27ff:fe7f:f08a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:1697 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1667 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:168543 (164.5 KiB) TX bytes:394523 (385.2 KiB)
[oracle@oracle10g_primary admin]$ ping oracle10g_primary
PING oracle10g_primary (192.168.70.203) 56(84) bytes of data.
64 bytes from oracle10g_primary (192.168.70.203): icmp_seq=1 ttl=64 time=0.024 ms
64 bytes from oracle10g_primary (192.168.70.203): icmp_seq=2 ttl=64 time=0.029 mslistener.ora配置文件已将监听地址配置为127.0.0.1(loopback)地址，我们再看看client是否还能正常使用数据库：
Client IP地址1.1.1.1
C:\Users\John>ipconfig |more
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::9e3:7005:a225:c0bd%14
   IPv4 Address. . . . . . . . . . . : 192.168.1.5
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
Ethernet adapter Bluetooth Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::35c8:958b:ac2f:d064%11
   IPv4 Address. . . . . . . . . . . : 192.168.70.200
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
Ethernet adapter VirtualBox Host-Only Network:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::5c6d:1a75:f795:16aa%21
   IPv4 Address. . . . . . . . . . . : 1.1.1.1
   Subnet Mask . . . . . . . . . . . : 255.0.0.0
   Default Gateway . . . . . . . . . :
C:\Users\John>tnsping ora10_test_203
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 25-11月-
2012 21:36:41
Copyright (c) 1997, 2010, Oracle. All rights reserved.
已使用的参数文件:
D:\OracleCLT\product\11.2.0\client_1\network\admin\sqlnet.ora
已使用 TNSNAMES 适配器来解析别名
尝试连接 (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 1.1.1
.2)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ora10)))
OK (30 毫秒)从client登录数据库
C:\Users\John>sqlplus john/12345@ora10_test_203
SQL*Plus: Release 11.2.0.1.0 Production on 星期日 11月 25 21:36:04 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
连接到:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select instance_name,status from v$instance;
INSTANCE_NAME    STATUS
ora10            OPEN可以看到，即便listener.ora配置文件中HOST IP改为loopback地址，client也是可以通过server上的相应网卡地址连接数据库。。
原因：
如果你有观察过server上1521端口发布的情况，你会发现，其实无论你在listener.ora写了什么ip地址，在Linux环境下（AIX/HP-UX除外)，端口都会发布在0.0.0.0的地址上
[oracle@oracle10g_primary admin]$ netstat -an |grep 1521
tcp        0      0 0.0.0.0:1521                0.0.0.0:*                   LISTEN client连接后观察OS上系统端口和地址的变化：
[oracle@oracle10g_primary admin]$ netstat -an |grep 1521
tcp        0      0 0.0.0.0:1521                0.0.0.0:*                   LISTEN
tcp        0      0 1.1.1.2:1521                1.1.1.1:50446               TIME_WAIT这就是为什么在Linux环境下Oracle listener.ora配置成127.0.0.1（loopback）地址,client还是可以通过server上的其他IP地址连接数据库的原因
备注：只针对Linux环境，AIX/HP-UX除外。

你可以尝试着在监听上加上IP=FIRST，再测试
我以前关于IP=FIRST的测试
[IP=FIRST作用说明|http://www.xifenfei.com/2713.html]

My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application"

My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes?

My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes?

I receive a Software Update notice that fails. How do I find out who/what is trying to update? How do I stop its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

About once a month I receive the Software update notice that has failed. How do I find out who/what is trying to update? If I decided I want this update how do I allow it to continue? If I decided I do not want this update how do I stop it and its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

Hi sharkbiscuit79,
Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013. PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Update connection proxy only listening on interface 127.0.0.1

Similar Messages

Maybe you are looking for