Update control of movement type is inco.

Hi All,
When user is Doing Good Receipts in Purchase orders & when it comes up he gets this message: (Update control of movement type is incorrect (entry 101 _ _ _ B)
Any help is appreciated.
Thanks & Regards,
S.Sinigh

Hi,
Please check the below thred .I think issue is with the OMS2
Update control of movement type is incorrect (entry 101 _ X _ B)
AMIT

Similar Messages

  • Movement type 122 Error while GI" Update control of movement type is incorr

    Hai Gurus,
             I am having an errow when doing a GI thru movement type 122. i am getting this error message " Update control of movement type is incorrect (entry 122 X X)" Can any one help me how to fix this.
    I did this transaction using MIGO_GI and selecting Goods issued and other as the options with 122 as movement type.
    warm regards.
    mahesh.

    Hi
    Mov type 122 is return to vendor if the qualtiy of Goods  is Poor / Quality
    Regatds
    AKM

  • Update control of movement type is incorrect

    while planning for a material with mrp type pd and strategy group as 20(make to order) i created a customer requirement against which after running mrp the tran md04 showed purchase req for a particular material which was released by me and converted into purchase order by me.
    but when I wanted to do goods receipt against the po generated it is giving me this error in tranc migo.
    ERROR IS     "update control of movement type is incorrect entry (101 X X e b _ v)
    the performance assist screen shows this
    Update control of movement type is incorrect (entry 101 X X E B _ V)
    Message no. M7226
    Diagnosis
    The system could not find entry 101 X X E B _ V in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

    Hi
    Check the T code OMJJ for the defining the MVt type also check the error is coming for MVT type 101 then check with mvt type 101 in t code OMJJ and check the updation control there.
    also consult your MM consultant for this error
    Regards
    Anupam Sharma

  • Update control of movement type incorrect

    Dear all,
    I have run a complete sales cycle from sales order creation to excise invoice generation. However, I have not done the PGI since in our case it is done after the billing. The materials have been dispatched and excise invoice submitted.
    Now, when I am doing PGI it is throwing an error "Update control of movement type incorrect (entry 601 _ X Q L _ V) ". I analysed and found that I have wrongly filled the Requirement Type in the sales order and corresponding entry is missing in OMJJ.
    1- I tried to add this entry but in vain. There is no 'New entry' or 'Copy as' button and hence i could not add..
    2- So, I tried the other alternative i.e. reversing all the documents and changing the RqTy in order. But that can't be done since excise has been sent.
    Is there any other way by which I can do the PGI or atleast capture the goods movement in the system and also update all the relevant documents?
    Plz guide.
    Thanks
    SAPshed

    To do the PGI / PGR , you have to cancel the Excise Invoice through J1IIN and then the Billing Document.Only after this , you can do the PGR or PGI.
    Best Regards,
    Ankur

  • Error in GR Update control of movement type is incorrcet (entry 101 _ _ _ B

    PO is created using Non-stock matreial and while doing good receipt of this PO user is getting error "Update control of movement type is incorrcet (entry 101 _ _ _ B). Message No. M7226.
    Plesae help.....

    Hi,
    check following link
    [M7226 Update control of movement type is incorrect (entry 101 _ _ _ B);
    [http://www.sapfans.com/forums/viewtopic.php?f=3&t=297261]
    Regards
    Kailas Ugale

  • Update control of movement type incorrect (entry Z31 X X _ L )

    Hi gurus,
    Business reporting  requirment to used  M T 301,  currently we using MT641 fr plant to plnt (stock in transit) transfer .
    now we have to replace 641.
    i)Kindly advice???
    I have  create Z31 copy  of MT 301 but shown  below error at PGI.
    ii)Update control of movement type incorrect (entry Z31 X X _ L )
        Error Message No E M7 226
    how to remove this error?
    thanks in advance.
    sapsd25

    Hi G. LakshmipathiLaxmipati guru,
    thanks for the prompt response.
    T code VAL01n & VL02n is alreday.
    Is their any MT similar to 301 use for stock transfer with DO & Excise
    Thanks
    SAPSD25

  • UPDATE CONTROL/WM MOVEMENT TYPES

    In OMJJ transaction in the UPDATE CONTROL/WM MOVEMENT TYPES i observed that for every single movement type there are many entries available .can anybody tell me how one can identify which is used and at what point?

    101          B          A     GR for asset        - this will triger when you do the GR for asset against the PO
    101          B          E     GR for sales order - this will triger when you do the GR for Sales order against the PO
    101          B          P     GR for sales ord.st. - same as above but for project specifc
    101          B          V     GR for acct. assgt.
    101          F          A     GR for asset
    101          F          V     GR for acct. assgt.
    101     E     B               GR for sales ord.st.
    101     E     B          E     GR for sales ord.st.
    101     E     B          P     GR for sales ord.st.
    101     E     B     X          GR STO for salesOrSt
    101     E     B     X     E     GR STO for salesOrSt
    101     E     B     X     P     GR STO for salesOrSt
    101     E     F               GR for sales ord.st.
    101     E     F          E     GR for sales ord.st.
    101     E     F          P     GR for sales ord.st.
    101     Q     B               GR for project stock
    101     Q     B          P     GR for project stock
    101     Q     B     X          GR STO Project stock
    101     Q     B     X     P     GR STO for project
    101     Q     F               GR for project stock
    101     Q     F          P     GR for project stock
    101          B          A     GR for asset
    101          B          V     GR for acct. assgt.
    101          B     X          GR stock in transit
    101          B     X     A     GR st.in trans:asset
    101          B     X     V     GR st.in tr:ac.assg.
    101          F               GR for order
    101          F          A     GR for asset
    101          F          V     GR for acct. assgt.
    101     E     B               GR for sales ord.st.
    Like wise every movement has diff indicator and diff activity.
    by looking the config you can see for all the activity

  • J_1IEXCDTL Update from 561 movement type

    Hello,
    In J_1IEXCDTL some entries are not avaialable, because whiles uploading of data from 4.6C to ECC6.0 some entries are missing.
    So i,e the reason while creating of outgoing excise invoice through J1IS iam not getting the vlaues in "GET EXCISE INVOICE" for perticular material.
    1)what can i do for this?
    2)If shall make the entries from 561 and shal i update J_1IEXCDTL and J_1IEXCHDR tables from this material document through J1I5
    Kindly do the needful.
    Regards
    sapman man

    Hello,
    We are uploading the J_1IEXCDTL and J_1IEXCHDR values in ECC 6.0.
    So when the some vendor procured materials are there, That excise values are saved in these two tables.
    So when we send the materials to some other plant, then we are creating the J1IS. then in Get excise invoice we are not getting the that old values.
    bcz when we are taking initial stock from 561 movement type. the stock of that material saved in stor loc. but we send this material to different plant, then while creating the J1IS , in get excise invoice tab we are not getting the old values.
    How to do?  how to find old excise values in GET EXCISE INVOICE tab in J1IS
    sapman man

  • RG1 Updation for 102 mov type

    Dear  all,
    RG1 relevance was set for movement type 101 gr against  order.However 102 was not made relevant for Rg1 ,some documents were reversed using movement type 102 after that 102 was made relevant for RG1. Now when i am going to update RG1 for 102 material documents in J1I5 none of the material documents are getting selected ,Kindly suggest some way to update RG1.

    hi,
    Conceptually and as per rules u cannot reverse the entries of RG1.u can scrap but cannt reversed.
    that is why 102 is not updating RG1.
    in short it is better that u take goods to RG1 when u want to sell them.
    regards,
    sujit borse

  • RG23A Part 1 updation for 261 movement type

    Hi,
             We have a business scenario where the same raw materials are procured from both excisable and non-excisable vendors. When purchasing from excisable vendors, CENVAT credit is availed and RG23A Part 1 and RG23A Part 2 entries are updated. When purchasing from non-excisable sources at the time of goods receipt in MIGO 'No Excise Entry' option is chosen.
    When subsequently materials are issued to production order using movement type 261, we try to consume this inventory from RG23A part 1 using transaction J1I5. However we come across cases where the material document qty is more than the balance qty in Rg23A part 1. This is because part of the inventory comes from non-excisable purchase.
    In this case how do we update RG23A Part 1 for the partial CENVATABLE inventory?
    Regards,
    Sridhar

    Hi Ashok/Binoy,
                                      Thanks to both of you for your answers. We are unfortunately not able to maintain multiple materials as the number of raw materials are very high and also maintaining bill of materials with multiple BOM's was considered not practical by the client. I then discussed the situation with the client's excise department with what Binoy had indicated. We have decided to make a "Part 1 entry only" during MIGO. The excise person indicated that this would be ok.
    Thanks again for taking time to reply.
    Regards,
    Sridhar

  • Message type control for movement type

    Hi All,
    We are using two movment types,
    301 - Plant to plant transfer
    934- initial stock entry reversal(custom one).
    Issue is when ever available stock of materia lM1 is consumed against some sales orders , if we try to do transfer posting using transaction MB1B MOVEMENT TYPE 301 system is throwing error message zero pcs available for M1 and not allowing us to post which is correct (messge M7 181).
    But for the same material M1 if try to post using transaction MB1C and movement type 934 system is tHrowing warning message zero pcs available for M1 , but allowing to post there by removing the confrimed / consumed stock from the sale order. here also the message is M7 181.
    So please let me know can same message type is used differently for two different movement type. If so where is the setting is being done.
    Regards,
    Babs

    Dear ,
    Because u already book for sales orders so release the  sales orders you can do, or increase the stock and u can use .
    regards
    shiv

  • 671 - movement type - Error update control

    Hi,
    I have created ew movement type Z71 with reference to 671 movement type for return sto delivery.
    We have removed the movement type category 01 from Z71 mvt type, due to this we are not able to do the PGR for return sto deliveries.
    While doing PRG system showing error: Update control of movement type is incorrect (entry Z71 X X _ L ).
    We have removed that mot.type category for the purpose of updating the RG23D register in Depot, it has been suggested by SAP only. But i don't know the link b/w update control and movement type category.
    Please let me know if these is any config for movement type control related.
    Thanks&Regards
    Lakshmikanth

    Hi All,
    This is a bug in SAP
    SAP has replied with Pilot note. They have given one pilot note to us.
    We are going to implimenting in J1IG program for updating the RG23D register with reference to negative post goods issue(material document which is having 671 movement type).
    The Pilot note number is 1300928. You can find more details in this note.
    We will get back tou you after testing this note.
    Regards
    Lakshmikanth

  • Error while copying a movement type

    Hi all,
    I want to create an movement type alternate to 501which will only update the qty not the value.
    1. For  this I have copied movement type 501 through t code OMJJ.
    2. While copying I changed the target movement type as "Y01".
    3. Selected the option of "Copy all dependent entries"
    Now i wanted to modify/delete some dependent entries to get the desired result, but unable to do so.
    such as in section "Update control / WM movement types" , I want to have only 3 lines and want to delete all other lines of special stocks, but unable to do so.
    Similarly with field "Account grouping", system not allowing me to delete any entries.
    Please suggest.
    BKR

    Hi,
    You just need to delete two items from the customizing view, go to next step, that will be okay!
    Regards
    Tao

  • 3rd party order processing GR movement type

    Hi
    In 3rd party order processing the goods are delivered to customer from vendor directly, but for billing purpose we do the GR at plant level(against purchase order)>invoice>Billing
    Physically stock is not delivered to the plant, so when we do the GR(against purchase order),if the movement type is 101 it will updatet the stock. 3rd party delivery is not done,stock will not be reduced. I want to know what is the GR movement type for 3rd party order processing, is it 101 or anyother movement type.

    Hi,
    Check in t.code OMJJ.
    Select movement type 101 and click on update control/WM movement types.
    There you can see this movement type is configured for different update control/WM movment types.
    Few entries are made in the system without value and quantity updates for movement type 101. So I assume, when you do MIGO using 101 movement type against third party purchase order, special stock indicator E and movement type B will be taken for statistical posting. You can do a testing to confirm this.
    Regards,

  • Movement type for production Reversal-102

    Hi Experts
    Our client has a requirement as such what transaction MB31 is providing for reversal of Production order,we can do only 4 at a Time.
    Our client requires same thing to be done in migo against production order so that we can reverse production 14 lines at a time(i,e 14 different Pos).
    I tried in MIGO i got error message
    Update control of movement type is incorrect(entry 102X x )
    Can we configure this movement type or not.
    Regards
    Sandeep Patil

    asfar as reversing PO isconcerned it is not a good idea to use MIGo or MB31 as the childpart consumption is not increased automativcally.
    So you should try CO13,where you can reverse 1 PO at a time
    and automatically 262 also takes place.
    Moreover why is that you have to revers so many POs which is a bad practice.

Maybe you are looking for