Update count is not refreshing in obiee11.1.1.7 after upgrade

Hi Team,
we have upgraded the obiee from 10g to 11.1.1.7
every this works fine
except.
when we are doing updated count for segment,Segment tree or priview List outputb File
the query ends at back end but in the screen from where i clicked the update count its still ruuning and giving message as "updating count wait...."
the query ends at backend but from screen it show running.
Please help me to come out of this problem

You look at this thread: [/questions/801725]

Similar Messages

  • I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

    I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

    There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
    When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

  • HT4061 im not able to activate my iphone 3gs after upgrading to ios6, saying server not available, what i can do

    im not able to activate my iphone 3gs after upgrading to ios6, saying server not available try later. im not able to make my phone work, not able to bring serial # im in guatemala what i can do?

    Activation issues are almost always the result of a device that has been hacked or jailbroken.
    If this is the case, no support can be provided here.

  • Not booting from 10.4.8 volumes after upgrade from 10.4.7

    I'm sorry to report that my aged G4 450 MHz AGP with 4 internal Hard disk drives no longer boots from any of the 2 volumes upgraded to Mac OS X 10.4.8 as soon as it was started from another volume!
    All was working fine as long as 10.4.7 was installed on the 2 232 GB disks connected to the SIIG ATA133 controller. I could boot from any OS on any of the 4 disks, 5 partitions:
    internal ATA66 bus:
    18 GB disk, 2 partitions: 'IBM_18GB' with OS 9.2.2 and TechTool Pro's 'eDrive' with 10.4.7
    71 GB disk, 1 partition 'IBM_71GB' with OS 9.2.2
    PCI SIIG ATA133 controller:
    232 GB disk, one partition 'I1232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
    232 GB disk, one partition 'I2232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
    Now I can only boot from the Mac OS 9.2.2 or the eDrive 10.4.7 partitions.
    What I did so far: 'I2232GB' was my main OS X startup volume, 'I1232GB' contains a clone of it, plus additional folders like software base and backups.
    After upgrading 'I2232GB' to Mac OS X 10.4.8 through Software Update and repairing permissions all was OK as long as the Mac was just shut down or re-started: it always booted up in Mac OS X 10.4.8 from 'I2232GB' without any problems.
    The next day I booted from 'I1232GB' to do the same there.
    Afterwards I could no longer boot in Mac OS X 10.4.8 from 'I2232GB' nor in in Mac OS X 10.4.8 from 'I1232GB': it just gets to the grey screen with the Apple logo, but the round circle underneath indicating some progress never appears. I left it there for hours: it just hangs.
    With the Option key held at startup I could boot from the other partitions with Mac OS 9.2.2 or the eDrive with 10.4.7. None of their Startup Control Panels was able to get me back to 10.2.8!
    So I booted from the TechTool Pro 4.5.1 DVD to Optimize both volumes, 'I1232GB' & 'I2232GB', always Files only.
    Then I booted from the DiskWorrior 3.0.3 CD to rebuild the directories of both volumes, 'I1232GB' & 'I2232GB'.
    Still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
    Downloaded the Mac OS X 10.2.8 Compo Update (for PPC) and installed it onto both 'I1232GB' & 'I2232GB' while booted from the eDrive which I keep on Mac OS X 10.4.7 - no luck either, still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
    Then I backed up the users folder from 'I2232GB' onto 'I1232GB', booted from Mac OS 9.2.2 and used Intech's Hard Disk Speedtools 3.6 to format 'I2232GB', afterwards initialized it with Alsoft's Plus Maximizer Extension for a Block Size of 512 Bytes.
    Installed Mac OS X 10.4 from DVD, as well as iLive '06 and upgraded everything to the latest releases with Software Update. All was working fine with all the required reboots until another startup volume was chosen: afterwards again I can no longer boot back into Mac OS X 10.2.8 on the fresch installed 'I2232GB'!
    Any help would be appreciated.
    Here is some information found by System Profiler from Mac OS X 10.4.7, eDrive, let me know if you need more:
    Hardware Overview:
    Machine Name: Power Mac G4 (AGP graphics)
    Machine Model: PowerMac3,1
    CPU Type: PowerPC G4 (2.8)
    Number Of CPUs: 1
    CPU Speed: 450 MHz
    L2 Cache (per CPU): 1 MB
    Memory: 2 GB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    Serial Number: XA00715VHSF
    Sales Order Number: M7628LL/A
    ATA Bus:
    IBM-DPTA-372050:
    Capacity: 19.12 GB
    Model: IBM-DPTA-372050
    Volumes:
    IBM_18GB:
    Capacity: 13.12 GB
    Available: 6.96 GB
    eDrive:
    Capacity: 6 GB
    Available: 3.03 GB
    IBM-DTLA-307075:
    Capacity: 71.59 GB
    Model: IBM-DTLA-307075
    Volumes:
    IBM_71GB:
    Capacity: 71.59 GB
    Available: 39.65 GB
    ATA Bus:
    PIONEER DVD-RW DVR-107D:
    Model: PIONEER DVD-RW DVR-107D
    Firmware Revision: 1.21
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    IOMEGA ZIP 100 ATAPI:
    Model: IOMEGA ZIP 100 ATAPI
    ACARD,6880M:
    Name: ACARD,6880M
    Type: scsi
    Bus: PCI
    Slot: SLOT-C
    Vendor ID: 0x1191
    Device ID: 0x0009
    Subsystem Vendor ID: 0x1191
    Subsystem ID: 0x0009
    Revision ID: 0x0003
    SCSI Parallel Domain 65536:
    Initiator Identifier: 7
    ATA HDT722525DLAT80:
    Capacity: 232.89 GB
    Manufacturer: ATA
    Model: HDT722525DLAT80
    Revision:
    Removable Media: Yes
    BSD Name: disk2
    OS9 Drivers: Yes
    SCSI Target Identifier: 0
    SCSI Logical Unit Identifier: 0
    S.M.A.R.T. status: Not Supported
    Volumes:
    I1232GB:
    Capacity: 232.89 GB
    Available: 14.1 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk2s3
    Mount Point: /Volumes/I1232GB
    ATA HDT722525DLAT80:
    Capacity: 232.89 GB
    Manufacturer: ATA
    Model: HDT722525DLAT80
    Revision:
    Removable Media: Yes
    BSD Name: disk3
    OS9 Drivers: Yes
    SCSI Target Identifier: 2
    SCSI Logical Unit Identifier: 0
    S.M.A.R.T. status: Not Supported
    Volumes:
    I2232GB:
    Capacity: 232.89 GB
    Available: 180.11 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk3s3
    Mount Point: /Volumes/I2232GB
    The RAM consists of 4 identical modules and is about 1 year old:
    DIMM0/J21 to DIMM3/J24:
    Size: 512 MB
    Type: SDRAM
    Speed: PC133-333
    Status: OK
    Many thanks for your help!
    Josef
    Apple G4 AGP   Mac OS X (10.4.8)   4 internal hard disks, dual layer DVD-RW, 2GB RAM

    What I did so far: 'I2232GB' was my main OS X
    startup volume, 'I1232GB' contains a clone of it,
    plus additional folders like software base and
    backups.
    After upgrading 'I2232GB' to Mac OS X 10.4.8
    through Software Update and repairing permissions all
    was OK as long as the Mac was just shut down or
    re-started: it always booted up in Mac OS X 10.4.8
    from 'I2232GB' without any problems.
    The next day I booted from 'I1232GB' to do the same
    there.
    Afterwards I could no longer boot in Mac OS X 10.4.8
    from 'I2232GB' nor in in Mac OS X 10.4.8 from
    'I1232GB': it just gets to the grey screen with the
    Apple logo, but the round circle underneath
    indicating some progress never appears. I left it
    there for hours: it just hangs.
    With the Option key held at startup I could boot from
    the other partitions with Mac OS 9.2.2 or the eDrive
    with 10.4.7. None of their Startup Control Panels was
    able to get me back to 10.4.8!
    So I booted from the TechTool Pro 4.5.1 DVD to
    Optimize both volumes, 'I1232GB' & 'I2232GB',
    always Files only.
    Then I booted from the DiskWorrior 3.0.3 CD to
    rebuild the directories of both volumes, 'I1232GB'
    & 'I2232GB'.
    Still I can not boot from either 'I1232GB' or
    'I2232GB' in Mac OS X 10.4.8!
    Downloaded the Mac OS X 10.4.8 Compo Update (for PPC)
    and installed it onto both 'I1232GB' & 'I2232GB'
    while booted from the eDrive which I keep on Mac OS X
    10.4.7 - no luck either, still I can not boot from
    either 'I1232GB' or 'I2232GB' in Mac OS X
    10.4.8!
    Then I backed up the users folder from 'I2232GB'
    onto 'I1232GB', booted from Mac OS 9.2.2 and used
    Intech's Hard Disk Speedtools 3.6 to format
    'I2232GB', afterwards initialized it with Alsoft's
    Plus Maximizer Extension for a Block Size of 512
    Bytes.
    Installed Mac OS X 10.4 from DVD, as well as iLive
    '06 and upgraded everything to the latest releases
    with Software Update. All was working fine with all
    the required reboots until another startup volume was
    chosen: afterwards again I can no longer boot back
    into Mac OS X 10.4.8 on the fresch installed
    'I2232GB'!
    I found several typos in above post, wherever it was 10.2.8 it should have read 10.4.8 - I'm very sorry for confusing you, this would not have made sense, but I found no way to edit the existing text therefore I modified the quote of it here.
    I do not need Mac OS X 10.2.8 back, but it would be nice to boot back in Mac OS X 10.4.8 from another volume as the current one - which was working fine before with Mac OS X 10.4.7.
    Many thanks,
    Josef

  • I am unable to update my album art since I commenced using match (and after upgrading to Yosemite).  How can I 'unembed' old cover art and replace?

    I am unable to update my album art on my iMac since I started using Match (and after upgrading to Yosemite 10.10.3).  A message advises that it's not possible to removed old artwork if it's embedded.  How can I 'unembed' old cover art and replace?

    Normally artwork recovered with iTunes is stored as a separate artwork file and iTunes refers to that file to display artwork when you click on a track.  However, if you then copy the file to another player the artwork file is left behind and the track will not display the artwork on the other player.  To get around this it is possible to embed the artwork in the music file itself so it always travels with the file.  Artwork can be embedded by you or files from third party sources may arrive with embedded artwork.  iTunes apparently now won't replace artwork for such files.  You can accomplish this by completely deleting artwork for a file or set of files in Get Info, then getting iTunes to fetch artwork which will then be set as a reference file rather than being embedded.
    I use an old iTunes so unless you are using an ancient iTunes it won't help for me to give you great details.  To erase artwork I simply get info on a series of files and check the box next to the artwork box without adding any artwork and close.  To do it for  single file I Get Info, go to the artwork display tab and click delete.  Here's a Windows reference for a newer iTunes (but the "old Get Info" reference is for early iTunes 12 and no longer works with newer):I cannot delete embedded album artwork in iTunes 12

  • I am not able to activate my iPhone 3GS after upgrading it to IOS 5.1.1 since it shows the error message "your iPhone could not be activated because the activation server is temporarily unavailable. I am asked to retry after some time. How can I avoid thi

    i am not able to active my ipone 3gs after upgrat to ios5.1.1. it show error message " your iphone could not be activted because the activation server is temperarily unavailable.try connecting you iphone to itunes to activate it, or try again in a couple of munutes" i retry many time, could not sold problem.

    You had a jailbreak and unlock.
    When you updated you cooked it.
    Your phone is done.
    Time for a new one.

  • Why is my iPhone 4S dead, not showing in iTunes, won't charge after upgrading to 5.1.1???????!!!!!!!??

    After upgrading my iphone 4S to 5.1.1 I had a problem... woke up one morning and my phone was DEAD!  It was completely non responsive, not showing up in iTunes, not charging from my Mophie, or A/C or Mac.
    I wanted to post the fix that worked for me in case anyone else out there is having the same heart pulpitations I was this morning.  In the online communities Parisilia had posted a fix to do a hard reset  (Hold down the home button and power button simultaneously for several seconds, the phone will reboot and will then be recognized in iTunes and you can restore from backup).  This worked for me - PHEW!! Off the ledge...
    Once my phone rebooted it didn't actually need a restore because it hadn't 'reset' - everything was as it was the night before, although the battery had gone from 51% to 41%  Personally I'm shocked that it would drain 10% in one night and who knows how long it was 'dead' for after I put it to bed at 11:45pm????!!
    This is my second iPhone 4S since Oct 2011 - the first one had to be replaced because of something radically wrong with the battery capability.  After several very frustrating months of trying various fixes Apple finally took the phone back thinking it musta been a dud.  I've had this one for about 3 months and it's been much better battery-wise, but now the mysterious DOA event has me seriously worried that I have another dud.  Looking thru the communities there seem to be many more people experiencing the same issue, so hopefully it's software and can be fixed (APPLE ARE YOU LISTENING??) rather than me being up the creek again.
    Good luck to anyone else experiencing the same issue.

    Try
    1. Totally remove iTunes and QuickTime
    see
    http://support.apple.com/kb/HT1926
    2. then you will need to do a "deep clean" of registry
    by this I mean a registry search for itunes and delete any and every key you find
    *however if you do not know how to do this safely don't try it*
    unfortunately the registry cleaners do not clean to this level
    and itunes leaves considerable detritus in the registry which can screw up updates and or reinstalls
    Apple needs a cleaner similar to Norton's effort which has similar problems. Their tool removes ALL evidence of a previous anti virus installation which is what the above solution achieves in iTunes

  • Digital AV Adapter: "Accessory not supported" and "TV Out" settings gone after upgrading iPad 2 to iOS 5.0.1

    I've used the digital AV Adapter (bought in Apple Store) nicely on iPad 2 with iOS 4.3.x.
    After upgrading to iOS 5.0.1 the TV Out settings have disappeared from the General Settings menu (no matter if adapter is plugged in or not).
    I thought that maybe it was time to do a full reset (just in case), so I did that, while the adapter was still plugged in.
    When the iPad finished resetting I got a popup message on the lock screen saying:
    "This Accessory is Not Supported by iPad"
    The adapter sort of works, i.e. there is a picture on my TV, but I cannot control the TV output settings which I could in iOS 4.3.x.
    The TV Out settings are completely missing from the General Settings menu (if they were moved in iOS 5.0.1 somewhere else, I could not find them).
    The "TV Out" menu item is not there at all.
    I cannot select between PAL/NTSC output anymore which is crucial for me as it seems that the iPad current setting is PAL, while I need to be it NTSC, otherwise video drop frames/stutters when played back over a TV.
    What I would like to know if there is anybody out there who has iOS 5.0.1 and actually can see the "TV Out" settings under the General Settings (I think it should follow the "iTunes Wi-Fi Sync" directly), because no matter what I did I cannot the settings menu to be displayed (I've reset the device, plugged and unplugged the adaptor and HDMI cable multiple times, tried different TVs, etc)
    Or, if the settings are in fact, gone by design, then how am I supposed to play 23.976 or 24 FPS media on a 1080p50 TV without stuttering (don't answer that, I know it is impossible, I am just frustrated). This is the first ever device I bought from Apple and I must say I am not that impressed by such turn of events.
    I mean, what kind of update removes essential features and makes the officially produced accessory suddenly "not supported"? Did they even test their own official accessory?? Seems not to me.
    This thread is talking about sort of similar issue (although it is about the VGA adapter):
    https://discussions.apple.com/thread/2413622?start=0&tstart=0

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • Not able to reset password of users after upgrading to 12.1.2

    After upgrading a VISION Demo instance from 12.1.1 to 12.1.2 I am not able to change the passwords for existing users. SSO is not used.
    When I go to Users form and query the user the password feild is greyedout and I get the error frm-40200 feilds is protected against update.
    Everything was fine before the upgrade and the upgrade went fine without any issues.
    Thanks!

    Ravi,
    Please mention the database version and the OS.
    Can you reset the password using FNDCPASS?
    Please see if these docs help.
    Note: 469596.1 - FNDSCAUS Form Password Field Is Protected Against Update After ATG RUP5
    Note: 395531.1 - System Administrator Unable To Reset User Password
    Thanks,
    Hussein

  • Hi I can not connect to iTunes Store in iphone after upgrade of iO6. What should I do now ???

    After upgrade I can not open application store or iTunes Store it's coming error can not connect to iTunes Store what should I do ?

    Apparently when I updated my software this morning it logged me off my Wifi for some reason (even though the wifi icon at the top of the screen indicated it was using it), I logged back in and could connect.

  • Not able to set static IP address after upgrading to 8.1 from 8.0

    I have a dell vostro 1014 laptop.After upgrading to 8.1 from 8.0 , i am not able to give static IP address in the Internet Protocol version 4 (TCP/IPv4) Properties of my Ethernet card properties.I am getting the following error:
    "COM surrogate has stopped working error"
    In order to access Internet Protocol version 4 (TCP/IPv4) Properties
    again , i need to restart the system
    after restarting my system and when i access Internet Protocol version 4 (TCP/IPv4) Properties  i find that ip address,subnet mask and default gateway( in the
    use following IP Address field) have given has become  empty.But
    preferred DNS server and alternate DNS server enteries are still there.I am able to fetch IP address from the DHCP server
    Does anyone knows how to troubleshoot this problem?

    This problem may occur due to loss of some system files while upgrading your  dell vostro 1014 laptop from 8.0.to 8.1 or unsuccessful upgrade. 
    Try to refresh your laptop by inserting windows 8.1 installation disc.
    To do this go to control panel->recovery->refresh your system without loosing any data
    If you don't have any windows 8.1 installation disc just download from Microsoft website.
    Make sure to choose correct architecture of your windows installation (x86 or x64) when you download.

  • PC is not going to sleep or shut down after upgrade to Windows10

    Hello,I upgraded my laptop from win 8.1 to win 10.Now when I close the lid or press the power button, the computer turns the screen off, turns the WIFI off, no more hard disk activity but it is not going to sleep.Also when I shut it down it goes throught the same procedure but never turns off.To start again, I have to keep pressing the power button to turn it off, then turn it on again.I did the powercfg - energy and got this in the report, "USB Suspend:USB Device not Entering Selective Suspend"When the computer had just started, I don't get that message, it also goes to sleep and shuts down normally, while later, I get this message in the report and no longer sleeps or shuts down.Any suggestion ??Thanks 

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15 Notebook and issues with sleep or shut down after upgrade to Windows 10. Try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. HP has been working closely with Microsoft on the development of Windows 10. I hope this helps. Thanks.

  • Not able to see Employee type supplier after upgrade to 12.1.2

    We have custom responsibility for Payables Manager, after upgrade to 12.1.2 from 11.5.10, some of the employees are not able to see the Employee Type supplier, but some employees are able to see all. I thought this maybe related to Role so I tried to add the roles that are missing from the employees that are able to see all supplier, but didn't help. Anyone know where to look at this? Thanks in advance.

    Hii ,
    Can you brief your problem in detail ? What do you mean by Not able to see Employee Type Supplier , is it do you mean in the Lovs ? or which form ??May be I can look into it .
    Thanks
    vennala

  • Mass storage issues (does not play in car on home stereo) after upgrading to V4.5

    I am having issues with Mass Storage after upgrading my 8130 to V4.5.  I can no longe hook the device to my home stereo or car stereo to play music. My computer does read the device.  It is not my media card.  I still have my old blackberry: the card shows up on both phones and computers.  It is not my cables as they work with my old phone.  I have also done all the obvious things like pull the battery and play with the media card setting
    This guy had the same issue though i never saw resolution:
    Any idea is appreciated! After upgrading the device software to version 4.5 earlier this week (BlackBerry 8800 with v4.5.0.69 (platform 2.7.0.72)) as proposed by T-Mobile and RIM Germany something has changed with the behaviour when connecting via USB as a mass storage device:
    Using a micro-SD card with 2 GB for some months now as a storage for MP3-Files which can be played with my Blue&Me system in my car. This is some kind of Microsoft Windows mobile platform (Automotive) providing playback of MP3-files etc connected via USB. This was never a problem with the previous software. It behaved as it should. Here is an example of what it previously did (taken from http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...):
    "On your Blackberry device, you may or may not first see a message about insufficient current. It just means you can't charge your Blackberry with that PC USB port. Hit the escape key once (on your Blackberry device). You will be prompted a question : do you want to activate USB Mass Storage Mode. You can answer YES or NO. Answer YES."
    The message about insufficient current is important here because the Blue&Me system does not provide the current as proposed by USB-standards. Anyway after clicking this message/warning away the Blue&Me would recognize the mass storage and start playback.
    After upgrading to v4.5 there is no warning about current any more and the mass storage can't be recognized. I've checked both components: The B&M works fine with any other USB-devices connected, and the BB works fine with Windows after connecting via USB (presumably because there is enough current!). All standard settings in Options/Media card for enabling mass storage have been tested but without success.
    Hopefully someone whose genius far exceeds mine will help me with this.  Thank You.

    I have exactly the same issue with my car stereo equiped with USB and my 8130 device. OS 4.3 works fine (and displays the "insuficcient current" message) and after upgrading to 4.5 mass storage mode not works anymore. And of course it works with regular desktop/notebook computers. I've made many experiments with different storage cards (now I use SDHC 8G from SanDisk). The card works fine if I attach it through card reader in my car, it even see multiple drives which cardreader creates.
    Even more I wrote the small blackberry application in java (i'am professional programmer) and ordered BB keys for $20 to deploy it to device. The program uses the RIM api call Device.requestStorageMode() which in my opinion should turn on storage mode of device. But the result was the same - car audio don't see the mass storage with OS 4.5.
    Interesting fact that in OS 4.3 the message about "insufficient current" appears BUT the device CHARGES via this USB without a problem. The same case with OS 4.5 - charging device is possible.
    Also, I can't switch to OS 4.3 because it have the serious problem with bluethooth connections - it suddenly lost my handsfree link and its very bad if I get incomming call during driving and my handsfree not work.
    Forgot to mention - now I have the OS 4.5.0.127
    Michael.
    Message Edited by djm132 on 04-09-2009 01:01 PM

  • IPhone will not synch contacts and calendar with Outlook after upgrade to 4

    I have been using an ACT! database on a PC for years, synching to Outlook with CompanionLink, and synching my iPhone to Outlook. After upgrading my iPhone to 4.0, I can no longer synch my contacts and calendar from Outlook. It "goes through the motions," appearing to be synching. But in the end, nothing changes. I have reloaded iTunes. The problem is between Outlook and the phone (the synch from ACT! to Outlook is fine).

    I'm having the same issue. Upgraded my 3G to OS4 which wiped out my contacts from the phone. I also use CompanionLink (Express) to sync ATC with Outlook and iTunes and the phone. Have spent hours/days on the phone with second level Apple tech support to no avail. CompanionLink IS syncing with Outlook but Outlook isn't syncing with the phone. Have tried syncing to Outlook directly (without CompanionLink) but no good result. Tried syncing through MobilMe. Can sync all Outlook contacts from my computer to me.com through MobileMe but does not sync with the phone. Tech support suggested trying to sync fewer contacts at a time as their might be a problem with the contacts file. DID manage to get 4000 of my 5600 contacts back in but can't get any more in. Previously had NO problem syncin all contacts directly and through CompanionLink. VERY frustrating.
    Also, I use Outlook Express for email. Since installing MobileMe I get an error message saying that Outlook isn't my default mail handler and I need to change the settings to make it the default mail handler. I DO NOT have "sync mail" checked as I'm not trying to sync my email accounts...only contacts and calendars. Made Outlook the default mail handler which stops the error message but still can't sync the contacts and I want to keep Outlook Express for email.

Maybe you are looking for