Update custom fields when bookin an attendee in TEM

Hi, this is my case:
When I book an attendee in a business event I need to maintain some additional info like e.g. the reason of training, any extra wages,etc, per employee.
I have created a custom PD infotype but i can't find a way to maintain it when booking the attendance. It would be useful if I could use something like Dynamic Actions....
Any idea?
Thanx!

Did you try the BAdI HRTEM00NET_ACTIVITY?
~Suresh

Similar Messages

Updating custom fields in DFKKOP when returning a refund

Hi all,
I am looking for an event to update custom fields on DFKKOP on the item level when returning a refund in PSCD. So far I have tried using events 290, 295. I know that somewhere the clearing document(AUGBL) is cleared. Haven't as yet found out where.
Kind regards,
Ameeta
Moderator note: Duplicate postings in several forums is a violation of the rules of engagement. Please use this thread for responses Updating custom fields in DFKKOP during refunds retunrs
Edited by: William Eastman on Mar 9, 2010 2:51 PM

Hi all,
I am looking for an event to update custom fields on DFKKOP on the item level when returning a refund in PSCD. So far I have tried using events 290, 295. I know that somewhere the clearing document(AUGBL) is cleared. Haven't as yet found out where.
Kind regards,
Ameeta
Moderator note: Duplicate postings in several forums is a violation of the rules of engagement. Please use this thread for responses Updating custom fields in DFKKOP during refunds retunrs
Edited by: William Eastman on Mar 9, 2010 2:51 PM

Error using Bapi_PO_Change for update custom fields

Dear Expert,
I have requirement for update custom field in table ekko. I used BAPI_PO_CHANGE with PO_number as a key. Then i put the value of custom field in segment TABLES - EXTENSIONIN.
But I get error : "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
When I checked, I found the difference between data type the value for BAPI_PO_CHANGE (Usinf structure BAPIPAREX) and data type for custom field in table EKKO.
Data Type in BAPI_PO_CHANGE is CHAR (you can see in structure BAPIPAREX). And data type for the custom field is DECIMAL.
I found the note '1124803', but the correction note was not applicable for us because our released system is 500.
Is there any suggestion or solution for resolve our problem?
Really appreciate your help.
Thanks.

Hi Laxmikanth Bethi ,
I tried with BAPI_PO_CHANGE in level header, and SAP was support the BAPI. And also i tried to appending the same fields in MEPOHEADR & MEPOHEADERX structures, but the problem is the type of my custom fields are DECIMAL, then the type MEPOHEADR & MEPOHEADERX structures are CHARACTER. So i got the error : "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
Because the types are difference.
Have you any suggestion to solve this problem?
Really appreciate for your input.

Need to update custom fields in MSEG table using "BAPI_GOODSMVT_CREATE"

Hi All,
There is a requirement to update custom fields in table MSEG which are part of append structure. There is a option to update the custom fields using the one of the tables parameters "EXTENSIONIN". Anyone please advice how can I update the custom field thru EXTENSIONIN.
Thanks in advance.
cheers,
Vijay

see the help
http://help.sap.com/saphelp_nw04/helpdata/en/c3/4099948b8911d396b70004ac96334b/frameset.htm
Regards
Kiran Sure

Not Updating Customized Table when System having Performance Issue

Hi,
This is actually the same topic as "Not Updating Customized Table when System having Performance Issue" which is posted last December by Leonard Tan regarding the user exit EXIT_SAPLMBMB_001.
Recently we changed the program function module z_mm_save_hide_qty to update task. However this causes more data not updated. Hence we put back the old version (without the update task). But now it is not working as it used to be (e.g. version 1 - 10 records not updated, version 2 with update task - 20 records not updated, back to version 1 - 20 records not updated).
I tried debugging the program, however whenever I debugged, there is nothing wrong and the data is updated correctly.
Please advise if anyone has any idea why is this happening. Many thanks.
Regards,
Janet

Hi Janet,
you are right. This is a basic rule not to do any COMMIT or RFC calls in a user exit.
Have a look at SAP note 92550. Here they say that exit EXIT_SAPLMBMB_001 is called in the update routine MB_POST_DOCUMENT. And this routine is already called in UPDATE TASK from FUNCTION 'MB_UPDATE_TASKS' IN UPDATE TASK.
SAP also tells us not to do any updates on SAP system tables like MBEW, MARD, MSEG.
Before the exit is called, now they call 'MB_DOCUMENT_BADI' with methods MB_DOCUMENT_BEFORE_UPDATE and MB_DOCUMENT_UPDATE. Possibly you have more success implementing the BADI.
I don't know your situation and goal so this is all I can tell you now.
Good luck!
Regards,
Clemens

BAPI_EQUI_CREATE to update custom fields.

Is it possible to update custom fields in Equipment master (EQUI table) using FM 'BAPI_EQUI_CREATE '? If yes, pls let me know which structure needs to updated.
Thanks,
Deepa

I would think that just the name would be a key indicator.....CREATE but you want to Update....Why wouldn't you use BAPI_EQUI_CHANGE to update existing equipment records. I would expect to have to extend the BAPI to handle the new fields.

Updating custom fields in BSEG table

Hi Experts,
I searched through SDN but did not find satisfactory answer to my problem.
The scenario is that FIDCC2 Idoc is coming to SAP system. This Idoc has extended to include few custom fields. These fields need to be updated in table BSEG. Table BSEG also contains these custom fields. However, the Idoc processing routine is not updating custom fields in table BSEG with the data coming in Idoc. How can I do that?
Thanks in advance,
Netrey

This message is processed by function module IDOC_INPUT_FIDCC2. If you drill down into the code a little bit, you should be able to find BTE/open FI or user exit calls (CALL CUSTOMER-FUNCTION) before the document is being posted.
I found two that are using the ACCIT structure for passing the line items, which should contain your customer fields as well, if they were added to BSEG properly (via transaction OXK3).
Please have a look.
Thomas

Extending sales order change BAPI and updating custom fields

Hi
i added 3 new fields into VA01/02/03 screen.i added at the header level in the additional data tab B area and appended them in VBAK table.
i want to change these values using sales order change BAPI.i added the fields in the structure VBAKKOZ,VBAKKOZX,BAPE_VBAK,BAPE_VBAKX.
may i know what else i need to do?should i move them anywhere with in the code or does the bapi take those values automatically using EXTENSIONIN structure?
also can some one send me code to actually check if bapi is changing my values?
if poss tell me how should i populate values into BAPI.

After adding field in structures VBAKKOZ,VBAKKOZX,BAPE_VBAK,BAPE_VBAKX, create pair of name-value pair extensiot structure and value.
Fill values as follows :
Data :   ls_parex TYPE bapiparex,
            lt_parex TYPE STANDARD TABLE OF bapiparex.
ls_parex-structure = 'BAPE_VBAK'.
ls_parex-valuepart1+0(10) = Sales order no
ls_parex-valuepart1+10(XX) = somevalue. <---- Value for custom field no 1
ls_parex-valuepart1+XX(XX) = somevalue. <---- Value for custom field no 2
APPEND ls_parex TO lt_parex .
clear ls_parex.
ls_parex-structure = 'BAPE_VBAKX'.
ls_parex-valuepart1+0(10) = Sales order no
ls_parex-valuepart1+10(1) = 'X'. <--- checkbox mark for custom field no 1
ls_parex-valuepart1+11(1) = 'X'. <--- checkbox mark for custom field no 2
APPEND ls_parex TO lt_parex.
Same pair for VBAKKOZ & VBAKKOZX
Updating custom fields
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      salesdocument    = Sales order number
      order_header_inx = 'U'   <--- U for update
    TABLES
      extensionin      = lt_parex[].
Edited by: nkarwa on Oct 25, 2010 12:39 PM

How Update Custom fields for EABL DB table by using BAPI_MTRREADDOC_UPLOAD

Hi friends,
How can I Update Custom fields for EABL DB table by using BAPI_MTRREADDOC_UPLOAD
for the parameter EXTENSIONIN of type BAPIPAREX
I am passing the Structure as BAPI_TE_EABL
in that structure MRIDNUMBER as EABL-ABLBELNR field value
ZMESSAGE some text of 30 char and
ZSKIPC of 2 char
but I am not able to update that data for the MRIDNUMBER (ABLBELNR ) in DB table EABL
I am getting RETURN Structure message type E
as
"Upload interim entries: Maintain one table only"
Can any one provide me solution
Thanks in Advance
Ganesh

Hi,
Refer the following SAP notes.
1. Note 485557 - BAPI_REQUISITION_CREATE: 'EXTENSIONIN' customer enhancements
2. Note 584902 - BAPI_REQUISITION_CHANGE: ExtensionIn not connected
3. Note 792132 - EBAN, EBKN: user-defined fields are not filled
Regards,
Harish

Updating custom field in table EKKO within user exit when PO is saved

I am trying to update a custom field in table EKKO when a PO is saved. I am using FM EXIT_SAPMM06E_013, within enhancement MM06E005. Since EKKO is not a table that can be updated with this user exit, I am using a technic that I read about on SDN where I assign a field symbol to the calling program variable and then am able to access data within EKKO table. But when I pass this data back into the field symbol, for some reason this field is not getting saved when the PO is saved. In debug mode, it looks like this field is getting updated, but when I look in the table after the PO is saved, it is not there. My code sample is below. What I am doing wrong?
data:
CHAR(50) VALUE '(SAPLMEPO)EKKO-ZHDRCSTCENTER',
g_zhdrcstcenter like ekko-zhdrcstcenter,
FIELD-SYMBOLS <F1> type any.
if i_ekko-ekorg = '5401'.
ASSIGN (char) to <F1>.
g_zhdrcstcenter = <F1>.
move '0000113322' to g_zhdrcstcenter.
<F1> = g_zhdrcstcenter.
endif.
Thanks!
Sarah Smyth.

Firstly, have you investigated using EXIT_SAPMM06E_008 to set any custom fields you have added in the EKKO_CI / CI_EKKODB structure?.. that might work more easily.
In terms of doing an assign back into a calling program's memory, it can work but it's probably worth setting a break point in your code then stepping through watching the values in EKKO - sometimes you can find subsequent code that re-writes an earlier copy of values back into the structure, thereby preventing you doing your change... SAP does warn this method is for "internal use". Also check in your debugger that it's SAPLMEPO and not SAPMM06E you need.

BADI or User exit for FB50 to update custom field in table COEP

Hi all,
i have added one custom field in table COEP through include CI_COBL .
when i do posting through sales order(VA02) or purchase order(ME22n) that custom fields in COEP get updated with controlling document
and through BADI AC_DOCUMENT i m updating that custom field in COEP.
but when i do manual posting through FB50 controlling document is generated in COEP but i m not able to update that custom field
because in this case BADI AC_DOCUMENT is not get triggered.
is there any BADI or User exit or enhancement spot for FB50 through which i can update that custom field in table COEP

Hi Sandy,
Thanks for u r reply,
RFAVIS01 is not getting triggered through FB50
and F180A001 ( EXIT_SAPLF048_001) is getting triggered but it doesnt contain COEP field in its parameter
import - F180A_DOC_HEAD_TAB
F180A_DOC_ITEM_TAB
changing - RELATION_TAB

To Update Custom field in mch1 table through MIGO Tcode

Dear champs,
I have added one custom field in mch1 table ( date ).
Now , In MIGO Tcode when i am doing posting, MCH1 table is also updated.
I want to know how to update my custom field in mch1 table at the time of posting.
Please tell me where to write logic to update mch1 table.
Regards,
Satyen Trivedi

Hi Satyen,
what data has to be update in MCH1 table new field, for this did you added any screen or you want to implement your own custom logic.
1) if you implemented the screen , then you have to write logic there itself.
2) If you want to update through custom logic , then you takeup with the Enhancements or BADI.
Regards,
Krishna

BADI MB_MIGO_BADI not updating custom field in MSEG Table

Dear Experts,
I am working on screen exit In MIGO transaction for transfer Posting.
I checked that BADI MB_MIGO_BADI having facility for screen exit and method line_modify having facility to change GOITEM Structure for the changed line item.
Now, to make this functionality work I have enhanced include structure CI_COBL which is available in both mseg table and goitem structure, now I have this customized fields on my custome tab through the enhancement and also to update this value 2 custom fields created in goitem structure and MSEG table through include structure CI_COBL.
Here my question is at the time of transfer posing creation in MIGO when I am passing the value in custom fields through screen and assigning it to custom fields of structure GOITEM through LINE_MODIFY method, it is giving me below worning message
BADI: Field GOITEM-ZZIDNLF is not ready for input. (Change is not taken over)
Now I have debuged the code, also checkout many threads and came to know that because of few checks in standred program (iNCLUDE:LMIGOKL3) these fields will not be updated WHERE IT always checks whether these fields are ready for input or not and if not ready then instead of assigning the values it throws worning message.
Now can you please through some light how can I go ahead as I have check out many threads and also tried to change value of cs_goitem structure using field symbol but throughing dump that it is blocked against changes through field symbol.
The helpful answers will be highly appriciated.

Hi,
In the badi mentioned by you GOITEM is the importing parameters & if the relevant field is not used in any MIGO screen you cannot change the data.
Please check example BADI interface: IF_EX_MB_MIGO_BADI~LINE_MODIFY
Please check the BADI documentation:
Changed data in GOITEM is only adopted if the relevant fields are visible and ready for input.
Changed data in GOITEM is not adopted if the relevant field is not used in any MIGO screen (warning via MIGO 049).
Changed data in GOITEM is not adopted if the relevant fields are not ready for input (warning via MIGO 050)
Thanks and Regards,
Chandra

Updating custom field bill type in standard table ERCH

Hi All,
I need to update the custom field bill type in table ERCH depending upon the bill transaction( if bill transaction is periodic,bill type will be updated as P and so on for other cases)
I am implementing a BADI ISU_DEF_BILL_PERIOD and i have used case statements(when abrvorg is P,bill type is P). While debugging i saw that the importing parameter bill document is generated but if i enter the same bill document number at that point in time in table ERCH, it shows no entries found. Thus sy-subrc is retrieved as not zero and hence the custom field bill type does not get updated.
I would like to know how do i go about this requirement since it seems that the bill document entry is made in table ERCH outside this BADI.I used x_new_billing_doc-erch-zbill_type = 'P' in the code but it says that it cannot be changed. Any structure which can be used to be filled here?
Thanks,
Shreeraj

Sheeraj,
You're using a wrong enhancement for your requirement. ISU_DEF_BILL_PERIOD is used to specify billing key date of a billing or print document depending on your requirements,.
SAP provides enhancement EBIA0001 for any custom enhancements to billing document. You can update the custom fields in the billing document before the document is updated.
Best,
Sai

Updating custom field in standard table ERCH

Hi All,
I'm trying to update a custom field bill type in table ERCH.I could not find any function for ERCH table and hence i am using enqueue dequeue with update statement.During debugging,the field BELNR(bill doc) is seen with a value for bill document but if at that moment i take that bill doc and put in table ERCH,it shows no entries found.Because of this reason,sy-subrc is not zero and bill type does not get updated.Any suggestions here are welcome.
Thanks,
Shreeraj

Thanks for your replies,
I need to update the custom field bill type in table ERCH depending upon the bill transaction( if bill transaction is periodic,bill type will be updated as P and so on for other cases)
I am implementing a BADI ISU_DEF_BILL_PERIOD and i have used case statements(when abrvorg is P,bill type is P). While debugging i saw that the importing parameter bill document is generated but if i enter the same bill document number at that point in time in table ERCH, it shows no entries found. Thus sy-subrc is retrieved as not zero and hence the custom field bill type does not get updated.
I would like to know how do i go about this requirement since it seems that the bill document entry is made in table ERCH outside this BADI.How do i update the bill type in table ERCH based on the billing transaction?
Thanks,
Shreeraj

Update custom fields when bookin an attendee in TEM

Similar Messages

Maybe you are looking for