Update data into Cube from 2 ODS

Hello Guys !
I have error in updating data from my 2 ODS to Mu infoCube.
I get this error :
10 records sent (0 received)
Any one have some idea why it doesn't work.

I have 2 ODS, I need to update my infocube with these 2 ODS.
on the ods context Menu : Update ODS data into Target ...
I get a Yellow Icon on the monitor.
on the details tab under Extraction, I get a yellow warning :
it says : 10 records sent (0 records received)
I'll check out the updates rules between ODS and my Cube.
thanks for your help.

Similar Messages

  • Dead lock error while updating data into cube

    We have a scenario of daily truncate and upload of data into cube and volumes arrive @ 2 million per day.We have Parallel process setting (psa and data targets in parallel) in infopackage setting to speed up the data load process.This entire process runs thru process chain.
    We are facing dead lock issue everyday.How to avoid this ?
    In general dead lock occurs because of degenerated indexes if the volumes are very high. so my question is does deletion of Indexes of the cube everyday along with 'deletion of data target content' process help to avoiding dead lock ?
    Also observed is updation of values into one infoobject is taking longer time approx 3 mins for each data packet.That infoobject is placed in dimension and defined it as line item as the volumes are very high for that specific object.
    so this is over all scenario !!
    two things :
    1) will deletion of indexes and recreation help to avoid dead lock ?
    2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
    Regards.

    hello,
    1) will deletion of indexes and recreation help to avoid dead lock ?
    Ans:
    To avoid this problem, we need to drop the indexes of the cube before uploading the data.and rebuild the indexes...
    Also,
    just find out in SM12 which is the process which is causing lock.... Delete that.
    find out the process in SM66 which is running for a very long time.Stop  this process.
    Check the transaction SM50 for the number of processes available in the system. If they are not adequate, you have to increase them with the help of basis team
    2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
    Ans:
    Lie item dimension is one of the ways to improve data load as well as query performance by eliminationg the need for dimensin table. So while loading/reading, one less table to deal with..
    Check in the transformation mapping of that chs, it any rouitne/formula  is written.If so, this can lead to more time for processing that IO.
    Storing mass data in InfoCubes at document level is generally not recommended because when data is loaded, a huge SID table is created for the document number line-item dimension.
    check if your IO is similar to doc no...
    Regards,
    Dhanya

  • Can I use one infosource to update data to CUBE and ODS???

    Hi all,
    Can anyone tell me if I can load data to OSD and Cube from one the same InfoSource? As I know, I have to have "0recordmode"(update mode) in communication structure for ODS not for Cube.  So how can ODS and Cube use the same Infosucre to update data?
    Thank you

    John,
    Depending on the volume of data and the type of infosource, sometime one update to ODS first and then subsequently update to the Cube or update both cube and ODS in parallel.
    For example, if you use AR or AP line item datasources, since you are extracting from both open line and closed line items tables, there could be multiple records for the same thing coming through.  First when it appears as an open line item, and when it is paid, it appears again as a paid line item so if you update directly to the cube, you can have multiples of the real value.  Thus in this instance you update from infosource to ODS then subsequently use delta update from ODS to cube.   CCA and C0-PA on delta mode are example where there are no overlapping, thus you can update both ODS and Cube at the same time.
    Hope this helps,
    Mary

  • Update Problem in CUBE from ODS.

    Hi Experts,
         I have problem in Updating data from ODS to CUBE and ODS to INFO-OBJECT.
    In brief, ODS has the Up-to date data ( Means till today - 28/07/10 ) . But the cube has Data till 22/07/2010. If I am trying to activate the ODS , Its is showing NO REQUEST TO ACTIVATE. And the DATAMART status is also not available . But the thing is , I checked in ODS till 22/07/2010 also DATAMART status is not available. And Its a Delta .  
    Please help me out, How can I update the data In CUBE and to an Info object.
    Thanks,
    Sethi.

    Hi ,
    I got the point , I am showing how the request are there  in date wise.
    In ODS   : 
                                                               CRM Sales Contract Item:Delta     29.07.2010
                                                               CRM Sales Contract Item:Delta                     28.07.2010
                                                               CRM Sales Contract Item:Delta      27.07.2010
                                                               CRM Sales Contract Item:Delta     26.07.2010
                                                               CRM Sales Contract Item:Delta     25.07.2010
                                                               CRM Sales Contract Item:Delta     21.07.2010
                                                               CRM Sales Contract Item:Delta     20.07.2010
                                                               CRM Sales Contract Item:Delta     19.07.2010
    It's Showins , there is missing REQ after 21.07.2010 .
    In INFO-CUBE
                                                                Delta Package for Update                         22.07.2010
                                                                Delta Package for Update                              21.07.2010
                                                                Delta Package for Update                             20.07.2010
                                                                Delta Package for Update               19.07.2010
                                                                Delta Package for Update                             18.07.2010
    It's showing , there is no data in INFO CUBE after 22.07.2010 and    in ODS the same Date Request is Missing. So my DELTA go Inactivated. After Updating the REQ on 22.07.2010 to CUBE , Unfortunately DELETED without maiking that RED.    My mistake was that.
    Please guide me ... What should I do ? Should I delete the Data in both CUBE and ODS. And Reload .
    Thanks,  
    Sethi.
    Edited by: ukumar on Jul 29, 2010 4:19 PM

  • How to update data into database from mx datagrid?

    Hello,
         I am developing a native application. I have connected my application using HttpServices i.e. remote objects to spring mvc 2.5 application. I have done inserting and deleting data from database. Now I want to update the records from datagrid itself. I am new to AIR please suggesst me something useful.
         Thanks in advance..

    Likely you're querying only one selected value from the request using HttpServletRequest#getParameter() instead of an array of selected values using HttpServletRequest#getParameterValues().

  • Error in Loading FIGL data into a standard ODS

    Hi,
    I have encountered an error when i attempted to load FIGL data into a standard ODS. Below is the error i received:
    Error message during processing in BI
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Second step in the update
    Second step in the update
    Second step in the update
    Second step in the update
    Procedure
    Check the error message (pushbutton below the text).
    Select the message in the message dialog box, and look at the long text for further information.
    Follow the instructions in the message.
    Initially i discovered a work around wherein i loaded the data into a write optimize ODS. It was successful. However, when i attempted to data mart the data and put it into a standard ODS, the similar error occurred.
    Please help me with this problem.
    Ramon

    Hi,
    Hi,
    I will suggest you to check a few places where you can see the status
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the new data table.
    Thanks,
    JituK

  • After upgrade to BI NW4.0S issue in loading cube from ODS

    Hi,
      I have an SAP delivered ODS(0CRM_OPPT_H) which I was loading for some time. The cube 0CRM_C04 was loaded from the ODS a couple of times. I have now deleted all the data from the cube and want to load the data from the cube to ODS, In between our BW was upgrade frpm 3.5 to BI NW0S..
      I have done all prerequisite , replicated the 80 datsource , deleted and re activated the update rule and transfer rule again.. and then tried to load the Cube from ODS.. however everytime I am getting the following error
    DataSource 80CRM_OPPI does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 12/23/2005 10:09:36.
    The time stamp in the BW system is 11/09/2005 13:02:29.
    Is it due to the upgrade?? I have done everything so that this dosen't happen, still could not resolve..
    Thanks

    Are you sure you've replicated the DataSource 80CRM_OPPI? Try replicating it individually again. If that doesn't help, have you tried reactivating the ODS Object itself?
    Regards, Klaus

  • Loading InfoObject master data into Cube

    Hi Guys,
    I have a  question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
    Data is being loaded into the InfoObejct. But when I check the cube there is no data.
    How do I load this master data into the cube without update rules?
    Thanks in advance.

    Hi,
    i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
    Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
    It depends upon your requirememt.
    Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
    In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
    As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
    Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
    In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
    You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
    You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
    You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
    Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
    Then just do the normal restrication at the report level
    You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
    then you can use it to restrict in the cube
    You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
    http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
    You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
    Regards,
    Hareesh

  • Ways to Upload data into Cube,

    1. What are the methods to upload data into cube, apart from flat file mode.(.csv)
    2. I  have some data in the Planning book in a  KF eg. Sales Order. , i need to upload this sales order data to another cube, say forecast cube. how can i do it???
    how to upload the data from Planning book to another cube.
    Thanks!.

    Please follow the steps:
    1.      If necessary, replicate the DataSource. To do so, you can use the following options in the Data Warehousing Workbench:
    ○     Select the source system in the source system overview and choose Replicate DataSources in the context menu. This replicates all data sources in the source system.
    ○     Select the data source in the DataSource overview and choose Replicate Metadata in the context menu. This replicates just the one DataSource.
      2.      Create an InfoSource and assign the data source to it. To do so, choose your application component on the InfoSource page of the Data Warehousing Workbench. In the context menu, choose Create InfoSource. On the next dialog box, select Transactional Data. Another dialog box appears. Enter a name and description for the new InfoSource and choose Enter. In the tree, select the new InfoSource. In the context menu, choose Assign DataSource. On the dialog box that appears, enter the source system. A list of DataSources appears. Select the required DataSource. Choose Enter.
    Alternatively you can remain in the DataSource overview. A  icon indicates that no InfoSource has been assigned yet. Either click the icon or choose Assign InfoSource in the context menu. On the dialog box that appears, enter a name for the InfoSource. Choose . On the next dialog box, enter a description and choose . Confirm the following dialog box. You can now maintain the InfoSource.
    You can assign a DataSource to one InfoSource only.
    3.      Create a DataStore object in the InfoProvider overview of the Data Warehousing Workbench.
    a.      Select the InfoArea and then choose Create DataStore Object in the context menu. The Edit DataStore Object dialog box appears.
      b.      Enter a name and a short description. If required, you can also specify a DataStore object to use as a template. Choose . The Edit DataStore Object dialog box appears.
       c.      On the left-hand side of the screen, you can select InfoObjects, for example, InfoCubes or InfoObjectCatalogs. You can copy characteristics or key figures from these InfoObjects to the DataStore object. We suggest that you select either the InfoCube to which you want to copy the data, or the InfoSource.
         d.      Copy the characteristics to the key fields in the right-hand tree in the DataStore object and copy the key figures to the data fields. In both cases, use drag and drop. You might have to transfer the 0RECORDMODE InfoObject from the Business Content.
         e.      In the Settings branch of the DataStore tree, set the following indicators:
    ■      Set quality status to 'OK' automatically
    ■      Activate DataStore object data automatically
    ■      Update data targets from DataStore object automatically
      f.      Activate the DataStore object.
    For more information, see DataStore Object.
           4.      Create update rules for the DataStore object.
    .a.      Select the DataStore object in the data targets page (Data Warehousing Workbench).
    b.      Choose Create update rules from the context menu. The Create Update Rules screen appears.
    c.      Enter the InfoSource that you created in step 2. Choose . Edit the update rules as necessary.
    d.      Activate the update rules by choosing .
           5.      Create update rules for the InfoCube as above, but with the DataStore object as the data source.
           6.      Create an InfoPackage for the InfoSource. In contrast to the normal procedure, on the Processing tab page, set the Only PSA and Update subsequently in data targetsindicators. Start or schedule the data load

  • Getting an error while trying to load data into cube

    Hello,
    I am trying to load data into cube but it gives me following error:
    fiscal year variant not expected.
    Can someone tell what could be done on fiscal year
    Cheers
    Jim.

    Hi,
    May be you have not mapped anything to fiscal variant or not included fiscal variant in the cube but you have used fiscal period inside it.
    You should load fiscal variant if you wanna use fiscal period.
    Map fiscal variant to a constant K4 or from the source if present and then see the result.
    Generally it is K4 except for FI-CO cubes .
    In the transfer rules, select field '0fiscvarnt' 'Tp' click
    Enter K4 for Constant................Save and Activate
    Iam sure you'd fix the issue.
    Regards,
    Ray

  • How to get new and updated data into LO Excel in Xcelsius

    Dear Experts,
    I have created dashboard on top of webi report by using Live-Office connection. Latest data of webi report is imported into excel and mapped data with components and generated SWF file and exported into server.
    To day my webi report has latest instance with new and updated data. But until unless by clicking "Refresh All Objects" i am not getting updated data into excel.
    When i am trying to open dashboard in BI Launch Pad/CMC it is showing data whatever exist in excel(i.e yesterday data). But here we need to show data of latest instance of webi report.(i.e New and updated data as of now).
    I have selected option "Latest instance: From latest instance scheduled by" in "refresh options".
    My Question & Doubts:
    1) Is it mandatory to open dashboard every day and need to click on "Refresh All Objects" to get updated data into excel or dashboard.
    2) Is there any option to automate this process.
    Regards,
    PRK.

    Hi,
    Schedule the webi report to get the latest data from the source. To answer your query no is doesn't require to open the dashboard every time to refresh the excel to get the latest data.
    Please use the Refresh Before Components are Loaded: Select this option to refresh the data each time the model loads and to use that data as the initial data for the model (using a Reset Button component, it will reset the data to the values from the last time the model was loaded).
    You are using the Live Office  so here automatic refresh is not possible without touch the swf file, you need to use the refresh but to get the latest data. If you are using QAAWS, Web Service & XML then automatic refresh is possible.
    For more information please check the below document for in-depth idea on the design pattern.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b02e31fb-3568-2e10-e78f-92412c3c0a96?overridelayout=t…
    Kindly revert for more clarification!!!
    --SumanT

  • Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)

    Hi all,
    I m getting following error while loading the data into cube.
    "Time conversion from 0CALDAY to 0FISCPER (fiscal year V3 ) failed with value 10081031"
    amit shetye

    Hi Amit,
    This conversion problem. Calender not maintained for Fiscal variant "V3", for Year: 1008.
    Maintain calender for year: 1008 and transfer global setting from soruce(R/3).
    RSA1--> Source systems --> from context menu --> transfer global settings > choose fiscal year variants and calender> execute
    Hope it Helps
    Srini

  • Error in viewing successfully loaded data into cube..

    hi gurus,
       I had a problem on viewing my data into cube. These data were successfully loaded from LIS environment. The errors i had received were 'Your user master record is not sufficiently maintained for object Commodity and Company Code Auth object'..'System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZFIN___ ZFIN___'... 'System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_BASIC_QUERY_DATA_GET ZFIN____ 64' ... 'System error: RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GET ZFIN____ 64 ...
      Does anybody encounters these errors? Can you give me step by step procedure on how to deal on this errors?

    This thread will solve your problem. look for Bhanu's post in it.
    Re: Cube Security

  • While loading transaction data into cube what are the tables generats

    Hi,
    while loading transaction data into cube what are the tables normally generats.

    Hi,
    Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
    When you do compress the request the data will be moved into E tables.
    Regards,
    Siva.

  • Proxy creation/ access key in the how to guide "push data into BW from XI"

    Hi !
    I'm experiencing troubles with a step of the how to guide "push Data into BW from XI".
    When i want to create the proxy in the BW system (step 10), i'm asked for an access key for the object R3TR CLAS CL_<name of the prefix>_<name of message interface>
    I think that access keys are needed when an object has to be modified. Do I really have to modify this SAP object ? I don't really feel like destroying the whole system...
    Thanks in advance !

    Hi Benjamin,
    you are not destroying anything in the system. Since you generating a class for the implementation of the proxy within the SAP name space, you are asked for the access key (you can register developers and objects via the OSS).
    The system behavior depends on the setting of the system, whether changes are are recorded, etc..
    Ask your basis administrator, who should be able to assist you.
       Cheers
          Andreas

Maybe you are looking for