Update data SLD

Hi,
I have installed a JAVA Stack with the EC EHP1 where I installed the SLD. I setup ECC 6.0 to send information to the SLD but I am not able to update the data. When you perform a query in the Technical System of the column "Last Update" does not update.
How do I perform the update automatically?
Thanks

...

Similar Messages

Dimension Current Flag and Last Update date not updated - SLD issue!

Hi.
ODI is running pretty well now. I have created several interfaces from flats, multi database tables, but still have to test the services and cdc, etc... later I will do this.
I am having a small issue here when dealing with Slowly Changing Dimensions. I am trying to populate a product dimension. I use a Load KM and the SLD KM. Then I update a product row in the source, and I wish to make sure that type-II runs OK for major and minor changes after running the interface.
Well minor changes run ok, deletes don't run at all, and update for major changes should generate another surrogate key and turn the old record "current flag" to zero and "close"/update the last update date as well!!!
What am I missing here? Is this related to the KM restrictions?
"Restrictions:
- Make sure to map ALL target table columns flagged as: "Surrogate Key", "Natural Key", "Current Record Flag", "Start Timestamp" and "End Timestamp". Notice that mappings set for the "Current Record Flag", "Start Timestamp" and "End Timestamp" columns are not used."
Do I need to implement somehow that behaviour or use another KM?
Another question regarding data warehousing: Well usually in a bespoke DW we can have N sources, N staging areas, and several data marts. Using ODI, for instance what are the best practises to create or simulate this behaviour??
I know that using a Knowledge Module I can load/extract (to temp tables in the source work schema), then integrate in the target schema.. using the same schema to temp staging tables or another schema.... what is the best aproach?
Any dw people wants to share some experiences here?
Thank you all.
Best regards,
Alvaro
Message was edited by:
Alvaro Silva

Thanks Cezar :)
Well Updates work if I unckeck 262!!! :) But deletes are not setting the CURR to zero!!!
PS: um abraço para ti também .... o mundo é pequeno! :) será que podes adicionar-me no messenger para alguma troca de experiências? [email protected]
Alvaro
Message was edited by:
Guest

Update Other SLDs

Hi,
I have two NW 7.11 system. I want to transport technical and business system definitions from SLD to another's SLD. I have added the URL, username and password in Administration -> data supplier/Update Other SLDs but it wasnt updated.
What could be missing in my configuration?
Kind regards,
Altuğ Bayram

As I understand, you need your Central SLD to know about your local SLD as a technical system? if that is the scenario
You need to login into your local SLD ( ABAP system) execute RZ70 transaction. Specify the Central SLD as your SLD Bridge system (by providing relevant details, gateway service etc) and schedule data push jobs in your local SLD by accepting the default proposal.
If your local SLD is on AS ABAP have a look at the following link:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/b7ba48e2c0356be10000000a421937/frameset.htm
if your local SLD is on AS Java only system have a look at the following link:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/b681ed96655295e10000000a42189b/frameset.htm
Regards,
Siddhesh

Cache updated date/time is shown as 1970/01/01

When we checked the cache notification for central adapter engine in the cache monitoring , the cache updated date/time is shown as 1970/01/01.
We have tried to do delta cache refresh and complete cache refresh, but we have not got the intended result. Please look in to the problem and let me know if you have any ideas regarding the same.
regards,
KRUSHI

Hi
Check for these SM59 in XI ->http connections -><INTEGRATION_DIRECTORY_HMI > ->test the connection. check is it successful or not.
Also you can do the cache refresh from SLD->Administration->Cache Overview

Can not insert/update data from table which is created from view

Hi all
I'm using Oracle database 11g
I've created table from view as the following command:
Create table table_new as select * from View_Old
I can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)
Anybody tell me, what's happend? cause?
Thankyou
thiensu
Edited by: user8248216 on May 5, 2011 8:54 PM
Edited by: user8248216 on May 5, 2011 8:55 PM

I can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)so what is wrong with the GUI tools & why posting to DATABASE forum when that works OK?

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

How can we update data in LDAP server using PL/SQL.

Hi,
How can we update data in LDAP server using PL/SQL program.
Is there any sample code for refrence.
Thanks,
Tarun

Hi Justin,
Thanks for your help. You got my correct requirements.
Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
I have the following information:
the admin user and password,server info , port and ldap_base for admin.
I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
Please help me.
Thanks,
Edited by: james. on Jan 12, 2009 5:39 PM

How to update data in a xml file.

I am able to retrieve data from a xml file but not able to update data. Also how can i add or delete node from a xml file.

Hi,
For some time I have also been trying to do the same thing with no success. So far I have tried a few approaches like $.post functions $.ajax post functions and HTML5 fileWriter functions. I am not well aware of the web development techniques but as fas as I understand the post or update of the json file should be done on the serverside mainly because of security issues. I am not sure how appbuilder works entirely and if there is any way to do this.
Have you managed to find a solution ?
(P.S. my goal is to update my chart data which is of course json file. So the idea here is to get some values from the user input and update the json file values then refresh the chart and display it with the new values).
Best Regards,
A.Dyankov.

Cannot update data in a demantra worksheet..

Hello all,
I am not able to update data in a demantra worksheet - referred to Oracle Metalink
https://metalink.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocID=459527.1&bmDocType=PROBLEM&viewingMode=1143&bmDocDsrc=KB&bmDocTitle=Worksheet%20Data%20is%20Not%20Being%20Saved%20to%20the%20Database%20-%20Error%20:%20Update%20Data%20Failed,%20Can't%20Create%20%3Cb%3EW...&from=BOOKMARK))
DocId= 459527.1
I have the same error message and I followed the steps exactly but I cannot seem to get rid of the error
Cannot create Wf process. Update Data id: ....
I have the components correctly defined, display units seems ok. Not sure why the Update Data is failing somewhere??
Cheers

Hey there!
Make sure you restart web server (tomcat) after any changes you make in the business modeler, and before checking the worksheets. Make sure component has units associated, and series associated too.
Hope this helps,
Aaron

FRM-40602: Cannot insert into or update data in a view

Hi all!
I have a form based on a view and I want to get rid off this message.
I set the properties blocks query only but it still doesn't work.
Does someone met with this situation?
Many thanks!

Hello
I've just been messing about with a similar problem. Basically, I have a view that involves a join across two tables, I have a data block in my form that's based on the view, and I've written an INSTEAD OF trigger to insert/update/delete from the two tables.
I was getting the error message 'Cannot insert or update data in a view', and it turned out that the error was happening because the join column between the two tables was the primary key on one of the tables, but the corresponding column on the join table had no unique key on it. This meant that Oracle couldn't establish a one-to-one relationship between rows in the view and rows in the underlying tables. The column on the join table was in fact unique on that table, and adding a unique constraint on that column in the database cured the problem.
Hope that's of use.
regards
Andrew
UK

Want to update data in a view based on multiple tables

Hi
I am facing a problem i want to update data in tables using a view. As that view is based on multiple tables so i am unable to update data. i came to know we can update table from view only if view is based on single table. so if anyone knows any alternative please let me know.
Thanx
Devinder

Devinder,
The table can be updated through a view based on multiple tables, if and only if the table is a "key preserved" table. Rather than explaining myself, i avoided the burden of typing by finding the material in Oracle Docs and pasting it for you :-)
If you want a join view to be updatable, all of the following conditions must be
true:
1. The DML statement must affect only one table underlying the join.
2. For an INSERT statement, the view must not be created WITH CHECK
OPTION, and all columns into which values are inserted must come from a
key-preserved table. A key-preserved table in one for which every primary
key or unique key value in the base table is also unique in the join view.
3. For an UPDATE statement, all columns updated must be extracted from a
key-preserved table. If the view was created WITH CHECK OPTION, join
columns and columns taken from tables that are referenced more than once
in the view must be shielded from UPDATE.
4. For a DELETE statement, the join can have one and only one key-preserved
table. That table can appear more than once in the join, unless the view was
created WITH CHECK OPTION.
HTH
Naveen

Update data from a view

Hi,
trying to update data from a view with:
- Company (table)
- Products (table)
In a form, the user wants to update
e.g: both products.product_name and Company.company_name.
Is there a way to update a view records built on 2 tables ?
Any idea will be really appreciated
Thks

An other question on INSTEAD OF Trigger:
Base Tables:
1.
SQL> desc pcs_companies;
Name Null? Type
COMPANY_ID NOT NULL NUMBER(12)
COUNTRY VARCHAR2(350)
COMPANY_NAME VARCHAR2(320)
COMPANY_PHONE VARCHAR2 (320)
COMPANY_FAX VARCHAR2(320)
COMPANY_URL VARCHAR2(150)
UPDATED_DATE DATE
2.
SQL> desc pcs_individuals;
Name Null? Type
INDIVIDUAL_ID NOT NULL NUMBER(12)
COMPANY_ID NUMBER(12)
FIRST_NAME VARCHAR2(320)
LAST_NAME VARCHAR2(320)
LOB VARCHAR2(300)
JOB_ROLE VARCHAR2(300)
TITLE VARCHAR2(300)
GENDER VARCHAR2(3)
EMAIL VARCHAR2(720)
FAX VARCHAR2(720)
PHONE_NO VARCHAR2(720)
UPDATED_DATE DATE
COUNTRY VARCHAR2(150)
ADDRESS_1 VARCHAR2(720)
ADDRESS_2 VARCHAR2(720)
ADDRESS_3 VARCHAR2(720)
CITY VARCHAR2(720)
3. pcs_individuals.COMPANY_ID = FK, ref pcs_companies.
4.
SQL> CREATE VIEW V_PCS_COMPANY_IND
AS
SELECT
   i.INDIVIDUAL_ID,
   c.company_id,
   c.country,
   c.Company_name,
   c.company_phone,
   i.Company_id indiv_company_id,
   i.gender,
   i.first_name,
   i.last_name,
   i.lob,
   i.job_role,
   i.title,
   i.email_address,
   i.fax,
   i.phone_no ,
   i.address_1,
   i.address_2,
   i.address_3,
   i.city
FROM
  pcs_individuals i,
  pcs_companies c
WHERE
  i.company_id = c.company_id
5.
CREATE OR REPLACE TRIGGER PCS_ADMIN.PCS_COMP_IND_UPDATE_TR
INSTEAD OF UPDATE ON PCMS_ADMIN.V_PCS_COMPANY_IND
FOR EACH ROW
begin
update PCS_COMPANIES
set
     Company_name = nvl(:new.company_name,company_name),
     company_phone = nvl(:new.company_phone,company_phone)
where company_id = :new.company_id;
update PCS_INDIVIDUALS
set
     gender = nvl(:new.gender,gender),
first_name = nvl(:new.first_name,first_name),
     last_name = nvl(:new.last_name,last_name),
     lob = nvl(:new.lob,lob),
     title = nvl(:new.title,title),
     email_address = nvl(:new.email_address,email_address),
phone_no = nvl(:new.phone_no,phone_no),
     fax = nvl(:new.fax,fax),
     country = nvl(:new.country,country),
     address_1 = nvl(:new.address_1,address_1),
     address_2 = nvl(:new.address_2,address_2),
     address_3 = nvl(:new.address_3,address_3),
     city = nvl(:new.city,city)
where company_id = :new.company_id;
end PCMS_COMP_IND_UPDATE_TR;
6.
CREATE OR REPLACE TRIGGER PCS_ADMIN.NEW_COMPANY_ID_INSERT
INSTEAD OF INSERT ON PCS_ADMIN.V_PCS_COMPANY_IND
DECLARE
ID number;
BEGIN
INSERT INTO pcs_companies (org_id)
select v_pcs_comp_id_seq.nextval
into ID
from dual;
:new.company_id = ID;
INSERT INTO pcs_individuals (company_id)
select v_pcs_comp_id_seq.nextval
into ID
from dual;
:new.company_id = ID;
end;
My question
On point 6:
Assumption:
- Company_id is PK of pcs.Company and FK in pcs.individuals
- It should be feed by sequence (v_pcs_comp_id_seq)
Now how can i insert the same value for company_id (current.v_pcs_comp_id_seq) in both pcs_companies and pcs_individuals ? I've tested it in the above INSTEAD OF Trigger.It failed.
Thks for any advice,
lamine

Update Data From DBGrid

Hi All,
I'm trying to write a program to update the DB informations.
For example, an Invoice Maintenance program that involve 2 tables,
Invoice Header and Invoice Details. I load the Invoice Details
records from db table to a DBGrid for user update and call a PHP
program using mx:HTTPService to write the updated data to db.
I would like to know how can I check the dbGrid that only
modified rows will pass to the HTTPService to updating? Or I need
to pass all rows one by one to HTTPService and update the records
one by one? Also is it only possible to pass one row every time
when I call the httpService or I can pass the whole dbGrid and
extract row by row in the php program?
If this problem can be solved I think I can complete the
system without any big problem (except printing ;-) )
Thanks a lot!
Wilson

Using the edit events, I would store a list of the item
indexes that have been changed. Then use that list to return and
build an xml string, and post it to the server via HttpService.
Tracy

Update data from cube to cube in BW 3.5

Dear Experts,
Can we update data from one cube to another cube in BW 3.5. i tried it, I created the connection between two cubes as i did in ods to cube through update rules but there is no option like in ods to send the data(update dso data to data targets).Please help me on this.

hi arvind,
Thanks, but i have some doubt again, i did it and also data transfered to the second cube, but after creating the connection i went to bi7 in infosource and there i found that cube name starting with 8(cube name), but my question is can i do it in bw3.5 without going to rsa1.

Update data from ODS to ODS with infopackage selection

Hi,
I am trying to update data from one ODS to another ODS with selection criteria in InfoPackage which is created manually.For Full load I can give selection criteria in InfoPackage. When I initialize data Selection is greyed out even selections for Full load exists. Please advise me how to give selections for delta loads from ODS to ODS loads.
Thanks in advance.
Ram

Once you started an ODS as destination in FULL mode from a DS you cannot get back.
So if you want to update from ODS to ODS using Change Log but considering only some data records you could create an Update Routine with a Start Routine that DELETES undesired records (e.g. DELETE DATA_PACKAGE WHERE ...) and then start an Init-Delta Loading.
Hope it helps
GFV

Update data SLD

Similar Messages

Maybe you are looking for