Update desktop site, don't make phone site live

Q. I've built a desktop site and published it.
It needs regular updates.
Now making a phone site now, but don't want any of it live util its finished.
How do I update stuff info on the desktop site while not publishing any work in progress
for the phone design?
Many thanks, Euan.

Hi Sachin,
Thanks for those thoughts.
I think method 1) will work for me, although It will be a pain to adjust
all the individual pages
of the mobile site.
However, if I make a coming soon master and apply it to the mobile coming
soon page,, I can remove the menuing and then it doesn't matter if the rest
of the mobile pages are published as they will be orphans with no links to
them.
Method 2) I don't think works because there is no way I know of to
recombine the two separate
muse sites together. Thus any updates to the muse file with only the
desktop version would have to have
those edits and changes made to both files. Is this the case?
So, I feel there is a case for adding a publishing schema in muse which can
cover this scenario.
At the simplest, a check box for desktop, pad, phone which determines what
is published.
( including the approp. media queries )
What do you think?

Similar Messages

Wow - I've been on hold waiting for someone from Adobe to answer for 20:00 minutes so far! This is after I used their little call back system...you know, the one where they don't make you sit on the phone. They are supposed to call you back when they ar

Adobe is awful

I apologize for the trouble faced by you, I understand that you had issue regarding the update of billing details, please mail me in private the issue that needs to be taken care of, I can certainly assist you regarding it.
Regards
Rajshree

How to make your site DIFFERENT...

Some have auto-playing movies, or songs...
Some have "comment" sections...
Some have no menus...
What have you done to make your site different?
What have you done to make your site eyecatching?
How is this accomplished?
Many of us are finding that we have already pushed iWeb to it's apparent limits, and we need more ideas!
http://www.derekbalsley.com

Thanks all for the kind words.
Linda, as far as the images go I edited them in Photoshop.
I saved them as jpegs using the quality slider set at 8
(never less for quality reasons).
The actual image "dimensions" in general are 280pixels x 421pixels
depending on orientation and 72 ppi in image "resolution" .
I think if you keep images no larger then 450pixels for general viewing
they should load fine.
The images that are the Page Headers are however W700xH400 which is the size of the default place holders in the templates, or 700x120 for the narrow ones.
I hope this isn't getting too technical, I've even considered doing QuickTime tutorials.
Derekbalsey: I'd say use the shapes and do things like adding strokes to a shape and use white or no fill or a complimenting color to fill it.
I will be updating the site tonight, nothing major, just slight changes to the page headers and adding some photos until I get some more "pro" looking ones I hope.
We'll see ho fast those load as they will be larger.
My goal is to use simple shapes and good colors, as i don't really know how to create animations and the likes.
G4 450 dual, PBG4 1.5/ATI 128/1gig ram Mac OS X (10.4.4) http://homepage.mac.com/uhanna

Phone Site is not loading

My desktop version of my site is loading instead of phone version. It loaded the first time then made some design changes and re-published the site and then rebuilt, restarted the program.... and still can't get the phone site to automatically load. Just keeps showing my desktop version unless I specifically add "/phone" after my site name. My site is kathrynraymond.com.

It is loading the desktop sit instead of the phone site. (sorry)

After update 3.1 - 3G does not work after phone sits idle

Updated from 3.01 to 3.1 - went smoothly, no problems. Restored my latest backup without issue. All is good. A few minutes later I tried to make a call and it failed. I tried to access the web - failed. Rebooted phone comes up as expected. Made a call, access to web working. 10 minutes later tried to make another call - failed; access to web failed again too. Switched over to Edge, rebooted. Calls and web access work. Waited 10-15 minutes, tried again; Edge still working. Switched back to 3G, rebooted. Same issue - calls/web work initially but after a short time, all calls and web access fail. I went through the 3.1 restore process again -- started over like it was a new phone. Again, the update worked without any issues/errors. I was able to restore my backup and all was good. But, same 3G problems occurred. So just for fun, I ran the Iphone config utility and captured the console log during a phone reboot sequence. After the phone booted up calls and web access were working with 3G. Then, let the phone sit idle for a while and saw these event occur in the log; the first 5 entries were made when I successfully sent a text message. After that message was sent I let the phone sit for a while. The next couple of entries were interesting. After the 'deactivated PDP context' messages appeared I could no longer make calls or access the web with 3G. Anyone else see this?
I never ever had this problem with 3.01 software.
Sat Sep 12 09:04:58 unknown com.apple.SpringBoard[25] <Notice>: told to send sms 867
Sat Sep 12 09:04:58 unknown CommCenter[29] <Notice>: queuing sms message with id 867
Sat Sep 12 09:04:58 unknown SpringBoard[25] <Error>: mms: queued messageId 867
Sat Sep 12 09:05:00 unknown com.apple.SpringBoard[25] <Notice>: internalID: [867]
Sat Sep 12 09:05:00 unknown com.apple.SpringBoard[25] <Notice>: notifying clients of event: 2 (recordID: 867)
Sat Sep 12 09:07:02 unknown CommCenter[29] <Notice>: Deactivating PDP context 1, because it has gone idle.
Sat Sep 12 09:07:43 unknown CommCenter[29] <Notice>: Deactivated PDP context 1 that supports connection types 0x2
Sat Sep 12 09:07:43 unknown configd[23] <Notice>: network configuration changed.
Sat Sep 12 09:07:43 unknown configd[23] <Notice>: CaptiveNetworkSupport:CaptiveHandlePrimaryChanged:2034 new primary: 67DCB7A6-30F5-4ECE-8FBB-5FC1DA71276D on pdp_ip0

I thought I'd post you a quick response because you described exactly the issues I was having. After my phone was idle for a while, my iPhone would refuse to get data over 3G.
I've tested this thoroughly and I'm able to "trip up" the phone into a state where it can't download data from the 3G network. But turning airline mode on for about 30 seconds then off again resets forces a renegotiate with the cell tower/3g and everything seems to work again about a minute later.
Nothing untoward listed in the console at this point either - The PDP context that you mentioned that was deactivated was more than likely the Internet Tethering. (It's usually PDP context 1, by the looks of things).
I think I might switch off 3G and see if that helps until Apple fix this issue. It is related to the wifi issues that others have reported - As I've seen my iPhone unable to download information via 3G if wifi is turned on, but you don't connect to a wifi network. But I can't seem to reproduce this reliably.
-Soen

Can you convert your desktop site plan into the phone & tablet version w/o re-creating the pages?

Can you convert your desktop site plan into the phone & tablet version without re-creating the landing pages? This seems too extensive to have to re-design each page?

Cwsnell,
On your nav bar there is a shorcut to other pages.
The most effecient way I have found to do this from the phone layout,
click on the page icon shown above
type in the name of the page (and select the desktop version as indicated by the icon of the monitor)
select all on that page (CTRL A / Command A) and copy (CTRL C / Command C)
revert back to the phone layout page and paste (CTRL V / Command V)
then resize, delete what you dont need, make any other edits and your done!
There is not a way to copy a page entirely over. The mobile version should have less information and less imagery to enable fast load times.
-SiteSpot

Can the phone site be disabled and have phones display the desktop site while designing phone site?

Currently, I have a live desktop design website which is being updated regularly. I tried to begin a phone site design, but was interrupted with a change to the desktop site (I'm adding new sponsors to an event on a regular basis). When I uploaded to the FTP, the phone site was also pushed through, making an unfinished page pop up on the browser of my phone. My phone site is going to be quite large in regards to page number and it's not practical to disable and enable each individual page.
Can I have the phone site entirely disabled and have phones display the desktop site while in the process of designing the phone app? I will still need to update the desktop site during this design period.
Thanks!

A similar thread here that should answer your query - http://forums.adobe.com/message/5551805.
Thanks,
Vinayak

Is it possible to make an iWeb site accessible to mobile phones? (in Japan)

Is it possible to make an iWeb site accessible to mobile phones? (I'm in Japan)
I've tried making a tiny site but my own phone (au A5516T by Toshiba) can't display it.
The URL is accepted but displays just a white blank screen.
I can't see anything about it in this iWeb forum or iWeb Help. Which I guess means that either it's impossible or that it's so elementary I shouldn't have to ask!
Is there some special code involved?
Any hints much appreciated. Thanks.
Simon

Try these articles: Put Your Content in My Pocket -- "While these articles are specifically targeted at the iPhone, many of the ideas and concepts I’m presenting can be useful and effective with other mobile devices."...
http://alistapart.com/articles/putyourcontentinmypocket
http://www.alistapart.com/articles/putyourcontentinmypocketpart2/
By the way, you can read that "Apple Meets With DoCoMo, Softbank On Launching iPhone in Japan" here:

Redirect to phone site instead of desktop?

Why does the phone version of my website show up on my rMBP when I use Chrome and how can I fix this? Works fine in safari...
Thatcher Brothers | The Thatcher Brothers Conquer Outer Space

This seems to be a bug that a lot of people are experiencing right now. Do you have "Redirect from Desktop" checked off under Site Properties under the Phone options?

What has the Apple support team done to the Top Sites screen? I just accepted an automatic update to be downloaded to my iMAC, and as a result of this "fix installation" the layout of the Top Sites screen has been terribly "destroyed"! What's the idea?

What has the Apple support team done to the Top Sites screen? I just accepted an automatic update to be downloaded to my iMAC, and as a result of this "fix installation" the layout of the Top Sites screen has been terribly "destroyed"! What's the idea?

If you are referring to the non-panorama , but rather the flat look, well that's what they did.
You can give your opinion here:
http://www.apple.com/feedback

SEO with a one-page Flash Desktop site combined with multipage Table & Phone sites

I have an old but very nice Flash site that, like all Flash sites, is only one page of html and therefore not very search engine- friendly (nor, tablet or phone- friendly). I would like to retain this site, but also create, new, multipage, html-optimized, non-Flash Tablet and Phone versions of this site by means of Muse. My question concerns SEO under this circumstance.
(1) Which of the sites will Google crawl to get title tags and content? The one-page Desktop version? The multipage Tablet version? The multipage Phone version? All three? If the latter, all three equally, or does it favor, say the destop version over the phone version?
(2) What about potential Google penalties for duplicate content shared between the three versions of the site?
Thanks for any knowledgeable advice you might be able to share with me.

Hi Justin,
Thanks for your prompt response, it was very informative. I read through the documents you referenced. I have a couple followup questions, but I suspect they may be a bit more specialized than you may be able to answer (although I think you'll admit they are very worthwhile questions).
(1) In the scenario I outlined above in my first post, the desktop version has next to no html content, while the tablet and phone version have lots of html content. Does the ranking of the desktop version rise or fall on its own merits in the Google rankings (in which case it will fall), or does it rise and fall based on the merits of the total html content in all three versions of the site, including the three sets of title tags?
(2) Should the title tags in all three versions of the website be identical to avoid Google's potential wrath, or will the site rank higher if they are all different from each other?
(What I am secretly wishing for, in case you read between the lines, is to have the ability to boost the Flash desktop version of the site that is only one page with one title tag and viritually no html by means of html rich, multipage Table and Phone versions of the site. Could it be this wish will be fulfilled?)
Thanks again for any insite you or others in the community can provide.
Chuck

SCCM 2012 Clients at Secondary Site don't update and shows status as INACTIVE

I have 1 Primary site and 1 Secondary sites. I have setup Secondary site Boundaries using IP subnet. I see that the systems from secondary
site show in the console and they all have clients installed but however 60% of the system shows client activity as INACTIVE and not receiving any heartbeat DDR none of the system showing hardware inventory. I am not positive
where to look as far as logs are concerned. I think the clients aren't receiving policy like they should.
Just to give a brief idea, Secondary Site server crashed and we had to rebuild the server and re install secondary site after rebuilding all the
problem. Everything is working fine in Primary site.
Secondary site is communicating with primary site MP and DP
I have checked MPcontrol.log it shows status as OK
I am able to install client through console but yes when I check the configuration manager properties it shows CCM Notification Agent as DISSABLED
and in the Action Tab Machine and User policy are the only cycles showing.
Checked replmgr.log and rclctrl.log but it’s not showing any error
Only log file which shows error is bgdserver.log ( pasting log errors )
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060           SMS_NOTIFICATION_SERVER     05-07-2014 12:09:01               3968 (0x0F80)
ERROR: Can't do post authentication without client certificate stored in regsitration.            SMS_NOTIFICATION_SERVER
05-07-2014 12:09:01                3968 (0x0F80)
ERROR: Failed to authenticate with client [::ffff:10.5.55.88]:49623.        SMS_NOTIFICATION_SERVER     05-07-2014
12:09:01               3968 (0x0F80)
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060           SMS_NOTIFICATION_SERVER     05-07-2014 12:09:01               3968 (0x0F80)
ERROR: Can't do post authentication without client certificate stored in regsitration.            SMS_NOTIFICATION_SERVER
05-07-2014 12:09:01                3968 (0x0F80)
ERROR: Failed to authenticate with client [::ffff:10.5.62.68]:49923.        SMS_NOTIFICATION_SERVER     05-07-2014
12:09:01               3968 (0x0F80)
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060           SMS_NOTIFICATION_SERVER     05-07-2014 12:09:06               3968 (0x0F80)
ERROR: Can't verify signature in message without client certificate for client SCCM GUID:B47059B1-D4E4-41A2-BC88-486A597FE399
SMS_NOTIFICATION_SERVER     05-07-2014 12:09:06               3968 (0x0F80)
ERROR: Invalid hook to be decoded. Authentication                SMS_NOTIFICATION_SERVER
05-07-2014 12:09:06               3968 (0x0F80)
ERROR: Failed to decode message body (<BgbSignInMessage TimeStamp="2014-07-05T06:39:01Z"><ClientType>SCCM</ClientType><ClientVersion>5.00.7804.1000</ClientVersion><ClientID>GUID:B47059B1-D4E4-41A2-BC88-486A597FE399</ClientID></BgbSignInMessage>)
with message header
Help me resolve this issue as I am struggling to resolve this for almost 2 weeks.
Please let me know which logs are helpful and I'll try to add it to replies.

Hi,
Quote:"see that the systems from secondary site show in the console and they all have clients installed but however 60% of the system shows client activity as INACTIVE and not receiving any heartbeat DDR none of the system showing hardware inventory. "
So not all the clients show inactive? Have you checked the logs in an inactive client? Such as ClientIDManagerStartup.log.
Have you checked Secondary Site server's computer name from SQL logins? You could try to remove this account, wait a while, recreate the same computeraccount login with sysadmin access. (http://social.technet.microsoft.com/Forums/en-US/d5383c23-6b71-47cc-9fad-fda82a44a3aa/secondary-site-showing-inactive-clients?forum=configmanagerdeployment)
You could use Configuration Analyzer for System Center 2012 R2 to troubleshoot issues.
http://technet.microsoft.com/en-us/library/dn469435.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Went in to update schedule on a page in my site. Looks fine on my end in editing. Go to move to server, once posted from the browser side there is now a Gray box going across the page. Tried a test page from another page and made a change and posted and s

Here is link to what the page looks like after being uploaded to server. Gray box appears, and its not in code. Even when I create a new page, this Gray box appears. Where is this coming from? How do I get rid of this from this page and any new pages I create, why is it doing this? Schedule

Morning Ken...
I went home and replaced the Music page image with the one you said worked (previous background image), but I am still getting the same issue, now this file is showing up as having errors? [If I use your previous background image
http://lynnsorensen.com/images/Music_bckgrnd.jpg]
Could it be Dreamweaver itself? I noticed there has been an update lately with Dreamweaver to my computer...some new Live option has been added. I use the online subscription to Dreamweaver. This is happening on all my pages with the images on all my sites, only shows up with the gray box if I make a change to a page. If I don't make a change to a page the page appear fine and in working order. I'm confused and frustrated. Any other options you may know of or suggest? Thank you so much for your time. I've provided screen shots from Goggle and Firefox below.
Here is screen shot in Google:
Here is screen shot in Firefox:

My top sites don't show--I get a blue screen in my brand new Dell XPS

In my previous XP computer I could run Top Sites; now I only get a blue screen and no sites!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites

Update desktop site, don't make phone site live

Similar Messages

Maybe you are looking for