Update does not happen in the infostructure

I have created an infostructure with 2 key figures
Invoiced quantity                 VD         A     03
Order quantity                     VA        A     03
Rules for Key figure invoiced quantity are
Source table   MCVBRP
source field name FKIMG
Rules for Key figure order quantity are
Source table   MCVBAP
source field name KWMENG
Rules for characteristic invoiced quantity are
Sales organization       MCVBRK                 VKORG
Division                       MCVBRK                 SPART
Material                       MCVBRP                 MATNR
Plant                           MCVBRP                 WERKS
Rules for characteristic order quantity are
Sales organization       MCVBAK                 VKORG
Division                       MCVBAK                 SPART
Material                       MCVBAP                 MATNR
Plant                           MCVBAP                 WERKS
the updating parameter is Synchronous updating
When I test this in MC30, the infostructure does not update, and I get the following information message.
Information 310 ***** No formula, requirement or external routine used
Message no. M2310
Diagnosis
When determining the key figure neither a formula, nor a requirement nor
an external routine are used.
Please let me know what setting I have to carry out to do the updating?

Dear,
Please refer the OSS Notes 377165 and 18613.
Useful transaction for infostructures - MC18,MC21,MC24 and MC30.
Check T.code OMOD for OS22 it should be should be set to asynchronous update.
Regards,
R.Brahmankar

Similar Messages

Update should not happen in the name of WF-BATCH

Hi All,
I have a requirement to change the WF-BATCH to the other user id.
The task completion or update should not happen in the name of WF-BATCH, instead it should happen with the name of the other user id.
Please can anybody suggest on this..
Thanks and Best Regards,
Sushmitha

Hello Sushmitha,
Like I said, it is only working if a previous step was a dialog step for the same user.
Then when all steps have advance with dialog it will automatically execute the "background" step (which is now dialog).
If the "background" step is the first to be executed then this scenario does not work.
It will only work if the agent has a previous work item AND is the one you want as the changed_by user.
A work around would be to either
a) check what the method does. If it executes a FM and if that FM has a parameter for changed by you can create a new method where you pass the changed_by user
b) check if a bapi/fm exists which allows you to change the user
c) create a program to execute the same logic as the method. Now you must create a new method where you can schedule this program as a background job with another user as the person who executes it.
Kind regards, Rob Dielemans

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

Because GPS has nothing to do with WiFi, cellular signals, or data of any sort. GPS is implemented by signals sent by satellites that are received by GPS receivers. The receivers process the information from the GPS satellites and calculate your location. GPS never sends data anywhere; GPS functionality is receive only.
If you have WiFi or cellular data turned on this can improve the accuracy of GPS, because the GPS receiver can then use the known location of cell towers and WiFi networks to refine the GPS location. GPS by itself has an accuracy of 10 meters, or about 34 feet. Using the additional information from WiFi and cellular data this can be brought down to 3 meters (10 feet). This mode is called Augmented GPS, or A-GPS.

When accessing certain links I get the follwoing on a white page: It Works! This does not happen at the link using Explorer

An example of this is when I clicked on the link for the weather .gov radar site on my bookmark it did not go to the radar site but returned the white pager with the owrs: It Works!
This has occurred on other sites where I have tried to access a link. I used Explorer and was able to access the site.
Any thoughts? I have run an antivirus scan to no avail.
Thank you

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I have the original ipad. I can't delete my photos from the ipad, and the new itunes update does not give me the option to sync photos. What do I do?

I have the orignal ipad. I synced all my photos from my computer onto. Now I don't have enough storage on my ipad so I want to delete these photos. When I try from my ipad it only gives me the option to share or copy, NOT DELETE. I went to resync my ipad to itunes, after I downloaded the new version and now it doesn't give me an option to sync photos. How do I get rid of them?

Wow. That's weird.
Is your iPad jailbroke? If it is, all bets are off. If it is not jailbroke, keep reading.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

The streamer (automatic updating) does not work with the last version

the automatic updating of screens (streamers) do not work anymore with the new version. I use Windows sp3.

the automatic updating of screens (streamers) do not work anymore with the new version. I use Windows sp3.

Issue in Workflow- Field Update is not happening

Hi Friends,
I am facing an issue to update a check box field Released.
I have created a task having Advance with Dialog opiton,Background processing to update the Checkbox field.
The BOR Object type used is BUS1006 and method is CHANGE. Everything looks fine when tested the task as well as the workflow in test mode and it is working fine in both the cases. But some how, this field update is not happening over the CRM 2007 Web UI. We are assuming it is due to user authorizations or some other settings ( like assignment of backend user to the workflow)
for doing this task. Can some one give us some pointers on this. This will be of great help.
Thanks,
Udaya

Hi Imtiaz,
I am new to this. Can you please give me some pointers on how to check whether WF-BATCH has the needed authorisations and the process can be executed in background.
Reply me at your convenient time.
Thanks a lot for your response.
Regards,
Udaya

When Syndication does not happen

Hello
Although I checked everything I could regarding the Port's configuration and Syndicator (Mapping, eligible records), the syndication does not happen.
The processing type is Automatic and processing interval hourly. The console does not get updated with the next syndication time.
Any ideas about what else should I be verifying ???
thank you in advance
Luciana.

Hello Ravi,
I re-created the ports for both repositories and it seems ok now. The processing date and time are being updated by the system now.
Question : Do we need to re-start the server when we do changes to the ports ?
I used to do this in the past because my changes never seemed to be saved by the system.
thank you

Output determination does not happen during Sales Document creation

Hello All,
I am facing an issue where the automatic output determination does not happen when the Sales Order is created. Let me explain a bit on the background.
Output type ZDL2 has been defined as a special function (TNAPR-NACHA = 8) attached to a custom program and Form routine to create Outbound delivery after successful posting of the sales order.
Condition records are maintained to trigger this output for the Key Combination of Sales Org/Distrib Channel/Division/Route. Access sequence has also been correctly maintained for the above fields.
When the Sales order is saved, the output is supposed to be triggered but out of several sales orders created, it triggered for just one document. We have no clues on what could be the issue.
One question here is, can we have the access sequence maintained for the fields from both header and item level (ie KOMKBV1 and KOMPBV1). Please be reminded that, in our case, the field ROUTE comes from the field catalog KOMPBV1.
Another point which we noticed is that, the Function Module COMMUNICATION_AREA_KOMPBV1 which is supposed to fill the Item data Communication structure for output determination was never called.
Has anyone came across such situations. Comments or suggestions are really appreciated.
Kind Regards
Sabu Kuriakose

Sabu Kuriakose,
Since you are using ROUTE as one parameter for the condition table, and it is at the item level.
the output is triggered at the header level.
So a sales order can contain multiple items with different routes. so at header level how will u identify the route ?
the fields might be available for creatign the condition table but the problem is the fields should get the value during order processing.
in the analsysis screen you will know that the field is getting the value of the ROUTE or not ?
also for creating a delivery you need a shipping point. same as above you can hae multiple items with different shipping points. how will u consider that scenario.
If you can explain that, then that will be helpful to answer your problem.

Feb 26th Update does not like gradient fills inside footers or headers

After installing the latest version of Muse (Feb 26), I noticed after exporting the HTML, gradients inside the footers and headers are not working properly. Even though the focal point is set at 50%, it appears to change the focal point to something greater. The gradient appears fine in design mode, but is only altered after it is exported. This bug only happens inside the header and footers. Does not happen inside the body of the page. I have attached a before and after image as reference.
Is anyone else experiencing this?

I'm having issues with a gradient bar on a Master page. It worked fine before. Now, when the item is applied on a Master Page, it increases the depth of the associated web pages and makes the gradient look terrible, with a huge white border above it. I cut the bar from the Master page and pasted it in place on the associated pages and it fixed the problem. But that really stinks when you have a big site built with Master Pages.

TS3186 My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! Th

My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony

1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422]

When I try to migrate from imac to macbook pro my user account says this user needs attention before migrating. My e-mail does not migrate in the process. this never happened before i updated to Maverick

When I try to migrate from imac to macbook pro my user account says "this user needs attention before migrating". My e-mail does not migrate in the process. This never happened before I updated to Maverick. I have repaired user permissions but this not make any difference

Just a Follow-up - the migration went fine. The migration did not import Little Snitch, Flip4Mac and DivX, stating they were incompatible. It also reported that Intego Back up Assistant has improper security setting (which I have not yet investigated).
I am encountering small problems. Safari would not open embedded pdf documents and instead showed a black screen. This was fixed with instructions found at http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html and it now works fine.
Importing 17 years of old mail from Eudora to Apple Mail was time consuming. mostly because of the pre-migration preening i did, but using Eudora file cleaner before the migrtaion helped a lot.
I amy find some more glitches, but so far everything seems to be working.

In printing only a specific selected section, the top line or 2 of the printout is not printing. This only happened since the last update. It does not happen when I use internet explorer.

I read many financial documents during the day. I sometimes print only a selected segment of an article or a financial statement. When I print selected only, the top line or 2 lines is omitted from the print document. It does not happen in explorer.
I used Firefox for years, and this just started in the last 3 weeks or so. I can get around it by just selecting 2 lines above what I want to print. But, it is annoying.

* [[Printing a web page]]
* [[Firefox prints incorrectly]]
Check and tell if its working.

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???

Sounds like you are not running iOS 5 ..........
Update your iPad 2 to iOS 5............
I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
http://www.apple.com/icloud/get-started/
http://support.apple.com/kb/HT4972

Update does not happen in the infostructure

Similar Messages

Maybe you are looking for