Update doesn't work; driver installation doesn't work

Hello,
I'm using Windows 7 on a T500, and I have encountered some strange problems, which seem sort of related:
1. Windows update installation ends with error code 80070670 Windows Update_dt000
2. My Bluetooth mouse (Logitech V470) required driver installation, but the process ended in failure;
3. I tried to use Lenovo System Update, but the process took much longer than usual, and didn't finish
My internet works normally. I scanned the computer for viruses, and there were none. I tried an earlier system restore point, and it didn't make a difference. Does anybody have a suggestion what could be wrong?
Regards,
bostjanv

@JSNL
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

PROMISE ULTRA 133 TX2 (PCI to ATA) driver installation does not work

I tried to install the WIN32 (XP) driver that works with XP PRO 32 - it doesn't work with W7 64 Bit. I also tried the Vista driver - same problem. The driver folder contains the inf file, the cab file and the sys file. However, the "force-install" (right click - install) doesn't work - error message: 'The inf file you selected does not support this method of installation'
What exacly does that mean? Does this mean that W7 uses a different concept of driver installation than the current versions of windows OS - or does it mean that there are syntax errors in the inf file, or does it mean information is missing? (or a combination of those) Is there an indepth (comprehensive) spec for the inf file format used with W7?
drivers from
http://www.promise.com/support/download/download2_eng.asp?productID=87&category=all&os=100
The latest available BIOS (2.10.0.15) is installed on the card.
Thanks for any help on this!
Torsten

Hello Torsten,
First you might keep windows update regularly to obtain the latest driver for your device. Note: Drivers on the Windows Update site are directly provided by hardware manufacturers. Microsoft tests drivers in various environments before they are published; however, we cannot guarantee all drivers will work on all hardware platforms as there are too many different models, although their hardware ID are the same as the standard version. In some cases, due to hardware modifications by different manufacturers, the driver updates may cause some error.
Meanwhile, please understand that Windows 7 is a new operating system and whole driverstore has been reprogrammed; you might wait for another period of time till the retail version is released and push the vendor company to upgrade their device driver. Thanks for your time and understanding!
For more details, please look at the first Sticky thread at the top of this forum.
What can I do if my hardware does not work?
This will give you some guidelines.
Good Luck!
Andy

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

Have a 64GB flash drive that used to work and after an update, now doesn't show up in finder

I have a 64GB flash drive that worked just fine and Finder would show it when I would insert it, well it seems that after I updated my mac it now doesn't recognize or show the flash drive. I am unsure if the update did something but like I said it worked previously to update and it works on other windows based computers. So is there a way I can fix this?

Hey Raveybaby
I would check to see if it shows up in Disk Utility. If it does, run a Repair Disk on it and also mount the flash drive as well. If it does not show up, check other ports as well.
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Installer doesn't work after upgrading to 10.3.3

Hi,
I'm trying to upgrade from 10.2.8 to 10.3.9. I bought the upgrade to 10.3.3 and installed it (with the upgrade feature, not the archive and install) and now when I try to open the .pkg file for the upgrade to 10.3.9, the installer doesn't work. It opens and a window comes up with a large "X" in the background, but the main dialog box is blank, the two buttons on the bottom right corner of the window are blank, and clicking them doesn't do anything. I know it's the installer because the same thing happens when I try to install other programs.
I can't use the software update feature because I can't get my mac to work with my DSL connection - but that's another story.
Thanks in advance for your help!
G4 Mac OS X (10.3.3) dual 1 GHz - 768 MB ram

You're Welcome John-Paul!
Yep, that's the problem!
Tiger is available for purchase at The Apple Store (U.S.).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
A Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, FastMac, etc.
Be sure not to again purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the PPC 10.4.8 Combo Update.
Panther System Requirements
Additional Panther System Requirements
Tiger System Requirements
Mac Model Compatibility & Requirements For OS X
Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media."
AppleRescue sells a Tiger installation set on CDs.
Shop Carefully, Examine All Documentation, And Good Luck!
ali b

HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Keyboard Driver Filter doesn't work in 6.0.2

We're aware that the NI Keyboard Driver Filter may cause the computer to hang in the middle of shutdown (Windows XP) if a USB keyboard is used, so we substituted a PS-2 keyboard. This worked fine.
Then, when we updated Lookout 6.0.1 to 6.0.2, making sure that the Keyboard Driver Filter was installed, we found that the Keyboard Driver Filter did not work. It was still possible for a user with a lower priority to reach the Task Manager by pressing Ctrl-Alt-Del.
We need to protect Lookout from being accidentally closed by users "playing" with the keyboard.
How do we get this function back?

I got something from R&D. The keyboard filter in Lookout 6.0.2 has some bugs, which cause it not to work and also some other unexpected problems. That means the filter in 6.0.2 doesn't work at all.
You'd better uninstall the whole Lookout 6.0.2 and then install it again without keyboard filter. After that, you need to install the keyboard filter shipped with DSC 8.0.1, which has fixed those bugs. See the attachment.
Sorry for inconvenience.
Ryan Shi
National Instruments
Attachments:
LVDSC.kbFilter.zip ‏307 KB

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

HT201263 Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTune

Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.

Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
It's still under 1yr warranty so will have to take to a dealer.
I'm sorry that's not much help for you but at least you know it's not a unique problem.
PC Windows XP

Since updating to 3.6.15 today, back button no longer works and FF doesn't remember URLs

Since updating to 3.6.15 today, back button no longer works and FF doesn't remember URLs. Not just that memory of previous URLs got wiped out, it still doesn't remember the ones I've typed in since I updated. And No back button, it's really hard to use.
I went thru all the settings and could not find a way to fix this problem. What is up? I've never had this happen in any version of IE, FF, or Chrome.
Can I get back previous version? Until then, it's Chrome and IE for me.
I'll be happy to delete any plug-ins if it will make this problem go away.
THANKS in advance!

Thanks. This didn't solve te problem but it seemed to have solved itself. all of a sudden it started working properly, without me even closing FF and starting it up again. Thanks Cor-el, if it happens again I'll try your solution.

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
Thank you. Nick

Okay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
Re: How do I turn off the compatibility mode for ITunes.
Does that clear up the compatibility message?

Can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. Can u please help???

FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

When I try to download Adobe Reader, the Adobe Installer opens a black box. The installer doesn't actually work. Any ideas how to fix? Thanks!

When I try to download Adobe Reader, the Adobe Installer opens a black box. The installer doesn't actually work. Any ideas how to fix? I am using Windows 8 installing the English version. Thanks!

Try the installer from http://get.adobe.com/reader/enterprise/

Update doesn't work; driver installation doesn't work

Similar Messages

Maybe you are looking for