Update Error- Froze on AC Adapter Icon
I recently updated my 1st generation iPod mini and now it is stuck on the icon with the AC adapter plugging in to the wall. I have tried resetting it and changing it to disk mode but nothing is working. Anyone have any ideas how to fix? Thanks.
All,
I had the same issue!... I have first generation Ipod Mini. I updated the firmware and the update wouldn't finish until I plug in the Adaptor (Wall Plug Icon).
I plugged in the Ipod using Ipod charger to the wall and it got stuck up to that point and won't finish up the update. The Ipod still show either Apple Icon or Wall Plug Icon.
I gave up and called tech support for help but they told me that I have to pay for support (out of warranty). I searched the Apple support website instead and still no help.
Finally, I went to Apple's store around my area and asked the guy in the store in the Genius Bar area to see it. All he had to do is plug it in using his adaptor and suddenly the Ipod is finishing up the update progress!!!! It's working fine now!....
So, my recommendation is.... go to the Apple Store and ask the tech guy there to try their Ipod power plug. I don't know what happened to my Ipod power plug but at least I know that my Ipod is not broken
Good luck!
Similar Messages
-
I updated my mini now it is froze on the ac adapter icon.
I dont have the ac adapter,will a car charger work instead?
or is there a way to get it back to the way it was before i tried to update it?All,
I had the same issue!... I have first generation Ipod Mini. I updated the firmware and the update wouldn't finish until I plug in the Adaptor (Wall Plug Icon).
I plugged in the Ipod using Ipod charger to the wall and it got stuck up to that point and won't finish up the update. The Ipod still show either Apple Icon or Wall Plug Icon.
I gave up and called tech support for help but they told me that I have to pay for support (out of warranty). I searched the Apple support website instead and still no help.
Finally, I went to Apple's store around my area and asked the guy in the store in the Genius Bar area to see it. All he had to do is plug it in using his adaptor and suddenly the Ipod is finishing up the update progress!!!! It's working fine now!....
So, my recommendation is.... go to the Apple Store and ask the tech guy there to try their Ipod power plug. I don't know what happened to my Ipod power plug but at least I know that my Ipod is not broken
Good luck! -
after updating to iPhoto9.6 an error occurred and the iPhoto icon says it is downloading. The library seems ok
Perhaps you need to wait for the download to finish. If it's going on for a long time then cancel it (which you can do in Launchpad) and try again.
-
Possiblely a bug - windows update error when using NAT between Hyper-V Virtual Ethernet Adapter
I'm using SCVMM managing my Hyper-V machine.
I have three physical network adapter on my hyper-v host as below:
I'm using SCVMM 2012 SP1 to create two virtual network adapter base on each Realtek controller, Bridge the traffic from the physical adapter, NAT the traffic from the internal virtual adapter to the internet facing virtual adater.
I can access the internet but i got the windows update error as below
If i NAT the internal virtual adapter traffic to the WIFI physical internal facing adapter, windows update is fine.
I'm using my hyper-v server windows NAT feature.
I did google a round, it looks like something wrong when you NAT the two virtual network adatper..
if anyone here can help, that's would be much appreciated.
2013-03-27 18:38:25:627 868 ba4 AU ## START ## AU: Search for updates
2013-03-27 18:38:25:627 868 ba4 AU #########
2013-03-27 18:38:25:627 868 ba4 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27 18:38:25:627 868 934 Agent *************
2013-03-27 18:38:25:627 868 934 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27 18:38:25:627 868 934 Agent *********
2013-03-27 18:38:25:627 868 934 Agent * Online = Yes; Ignore download priority = No
2013-03-27 18:38:25:627 868 934 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-03-27 18:38:25:627 868 934 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
2013-03-27 18:38:25:627 868 934 Agent * Search Scope = {Machine & All Users}
2013-03-27 18:38:25:627 868 934 Agent * Caller SID for Applicability: S-1-5-21-759915917-1653667288-1560420946-1106
2013-03-27 18:38:25:627 868 934 EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://ds.download.windowsupdate.com/v10/2/microsoftupdate/redir/muauth.cab"
2013-03-27 18:38:25:627 868 934 EP Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
2013-03-27 18:38:25:627 868 934 Setup Checking for agent SelfUpdate
2013-03-27 18:38:25:627 868 934 Setup Client version: Core: 7.8.9200.16465 Aux: 7.8.9200.16451
2013-03-27 18:38:25:799 868 934 EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "http://fe1.update.microsoft.com/v10/2/windowsupdate/selfupdate"
2013-03-27 18:38:25:799 868 934 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27 18:38:25:815 868 934 Misc Microsoft signed: Yes
2013-03-27 18:38:25:815 868 934 Misc Infrastructure signed: Yes
2013-03-27 18:38:26:002 868 934 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27 18:38:26:002 868 934 Misc Microsoft signed: Yes
2013-03-27 18:38:26:002 868 934 Misc Infrastructure signed: Yes
2013-03-27 18:38:26:002 868 934 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2013-03-27 18:38:26:002 868 934 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-03-27 18:38:26:440 868 934 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-03-27 18:38:26:440 868 934 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx
2013-03-27 18:38:28:846 868 934 WS WARNING: Nws Failure: errorCode=0x803d0014
2013-03-27 18:38:28:846 868 934 WS WARNING: Original error code: 0x80072efe
2013-03-27 18:38:28:846 868 934 WS WARNING: There was an error communicating with the endpoint at 'https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx'.
2013-03-27 18:38:28:846 868 934 WS WARNING: There was an error receiving the HTTP reply.
2013-03-27 18:38:28:846 868 934 WS WARNING: The connection with the remote endpoint was terminated.
2013-03-27 18:38:28:846 868 934 WS WARNING: The connection with the server was terminated abnormally
2013-03-27 18:38:28:846 868 934 WS WARNING: Web service call failed with hr = 80240440.
2013-03-27 18:38:28:846 868 934 WS WARNING: Current service auth scheme='None'.
2013-03-27 18:38:28:846 868 934 WS WARNING: Proxy List used: '(null)', Bypass List used: '(null)', Last Proxy used: '(null)', Last auth Schemes used: 'None'.
2013-03-27 18:38:28:846 868 934 WS FATAL: OnCallFailure(hrCall, m_error) failed with hr=0x80240440
2013-03-27 18:38:28:846 868 934 PT WARNING: PTError: 0x80240440
2013-03-27 18:38:28:846 868 934 PT WARNING: SyncUpdates_WithRecovery failed.: 0x80240440
2013-03-27 18:38:28:846 868 934 PT WARNING: Sync of Updates: 0x80240440
2013-03-27 18:38:28:846 868 934 PT WARNING: SyncServerUpdatesInternal failed: 0x80240440
2013-03-27 18:38:28:846 868 934 Agent * WARNING: Failed to synchronize, error = 0x80240440
2013-03-27 18:38:28:862 868 934 Agent * WARNING: Exit code = 0x80240440
2013-03-27 18:38:28:862 868 934 Agent *********
2013-03-27 18:38:28:862 868 934 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27 18:38:28:862 868 934 Agent *************
2013-03-27 18:38:28:862 868 934 Agent WARNING: WU client failed Searching for update with error 0x80240440
2013-03-27 18:38:28:862 868 598 AU >>## RESUMED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27 18:38:28:862 868 598 AU # WARNING: Search callback failed, result = 0x80240440
2013-03-27 18:38:28:862 868 598 AU #########
2013-03-27 18:38:28:862 868 598 AU ## END ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27 18:38:28:862 868 598 AU #############
2013-03-27 18:38:28:862 868 598 AU All AU searches complete.
2013-03-27 18:38:28:862 868 598 AU # WARNING: Failed to find updates with error code 80240440
2013-03-27 18:38:28:862 868 598 AU AU setting next detection timeout to 2013-03-27 12:38:28
Rickysome more interesting article i've found so far
http://practicalkungfu.net/2013/03/11/windows-update-error-code-8024402f-on-hyper-v-guests/
http://faultbucket.ca/2012/08/windows-server-2012-windows-update-error-0x80240440/
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/80548a4e-6c68-4700-a37b-9e22890bd8af
Ricky -
All i get is the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. the error code is 2324 .. I can not even uninstall itunes and start all over again.. i get the same error code. the desktop icon has disapeared and i am at a complete loss...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Ipod mini has shown adapter icon for 3 days since update
hi
so i had to update my ipod mini inorder to read music from iTunes. Unfortunately, when i updated it, the adapter icon came on so I charged in in the wall via the USB adapter. That was three days ago and I cant get the adapter image to go away, plus my computer doesnt recognize when my ipod mini is connected. Can anyone help?Please do a Reset
http://docs.info.apple.com/article.html?artnum=61705
Then do the Restore again. -
Windows 7 PRO GP update error
We have a very peculiar problem
We have a Primary DC & Secondary DC installed in all our office ( Windows 2008R2). The Domain name is abc.com for all the Offices and the replication between the DC's happen in between the office happen without a problem.
The clients in each of the offices gets authenticated from the DC in the respective office.
But for a group policy update it gives an error as below
"Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file
\\<FQDN>\sysvol\<FQDN>\Policies\{BD732AAF-016F-11D2-945F-00C04Fb984F9}\gpt.inifrom a domain controller and was not successful. Group Policy settings may not be applied until this event is
resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The error happens only on some clients.
We are able to Ping, connect to the local DC and the client gets the IP from the local DC and also gets authenticated by the local DC for log on.
On the PC which gives an error if we try to ping domain name - abc.com it returns the ip of the DC in a another office and not the local DC.
Request to suggest a solution / tips to identify the problemThanks for your reply
Please find the IPConfig Details as requested
Windows IP Configuration of CLIENT with Problem
Host Name . . . . . . . . . . . . : NP
Primary Dns Suffix . . . . . . . : ALT.COM
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ALT.COM
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . : ALT.COM
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 00-19-99-F2-5B-BC
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::bc5c:5976:37b2:d42a%14(Preferred)
IPv4 Address. . . . . . . . . . . : 10.102.22.72(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, July 08, 2014 8:02:23 AM
Lease Expires . . . . . . . . . . : Wednesday, July 09, 2014 8:02:23 AM
Default Gateway . . . . . . . . . : 10.102.22.1
DHCP Server . . . . . . . . . . . : 10.102.10.10
DHCPv6 IAID . . . . . . . . . . . : 318773657
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-FE-B8-99-00-19-99-F2-5B-BC
DNS Servers . . . . . . . . . . . : 10.102.10.10 10.102.10.11
Primary WINS Server . . . . . . . : 10.102.10.10
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.ALT.COM:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : ALT.COM
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
===========================================
Windows IP Configuration on DC
Host Name . . . . . . . . . . . . : ALTHODC03
Primary Dns Suffix . . . . . . . : ALT.COM
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ALT.COM
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network C
on
Physical Address. . . . . . . . . : 00-19-99-7E-7F-62
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.102.10.10(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.224
Default Gateway . . . . . . . . . : 10.102.10.1
DNS Servers . . . . . . . . . . . : 10.100.10.10
10.102.10.11
127.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{4353BDBD-759C-45E1-A523-621CC16121AA}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
=======================================================
We do not use Sysprep and also we normally do not use imaging
Domain Time is in Sync with DC & Client -
Hi All,
While working with JDBCXIRFC, the only error with Reciever RFC Adapter is as
follows.
ZBAPICUSTOMER_DETAILS: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declaration(2)
In SXMB_MONI, the messages are queued up.
How to debug this error?
Regards
Pavan1. Map all the mandatory fields..
I have mapped all the mandatory fields. If i enter same kind of values in the same fields of BAPI manually (in se37), the table gets updated.
<b>how you can say that data is getting into the right tables...when you are sending the same data..</b>...may be the data is old only..
<b>Perform the Message Mapping and Interface Mapping test in IR only...</b>
3. Kindly check the Sender_MM Mapping once more...If it is fine...reactivate and Update the cache..
Its fine and reactivated and even updated cache.
Now one doubt....
In Message mapping, the sender mesage type is as follows.
sender_mt 1:1
->Row element 1:unbounded
> zkunnr element xsd:string 1: unbounded
> zname1 element xsd:string 1: unbounded
> zstras element xsd:string 1: unbounded
> zadrnr element xsd:string 1: unbounded
> ztelf1 element xsd:string 1: unbounded
I have mapped ROW with ZBAPI_DETAILS.
the root of sender message type SENDER_MT is left as it is....
Is there anything need to be done (mapped) with this root of sender message type?
<b>No i don't think so, what i can get from your approach is that you want to receive n similar type of records in a Message and want 2 create n different messages for each record from source structure.. </b>
With this status, i have tested the Test Configuration in Integration Directory. Still getting same error message as follows...
Kindly let me know the name of BAPI.
<b>Perform the Message Mapping and Interface Mapping test in IR only...</b>
java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_sender_mm_:
Regards, -
CLIENT_CREATE_FAILED error in the Call Adapter pipeline
Hi, all.
i think i've almost done the configuration of XI 3.0(CI + 2 DIs).
SXI_CACHE, SLDCHECK, import of IR, ID objects ...etc. are O.K.
But when i really run some scenarios of,
File Adapter --> XI --> ABAP Proxy or
ABAP Proxy --> XI --> Java Proxy, messages always got error in the "Call Adapter" pipeline of IS with the following message.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_CREATE_FAILED</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Cannot register HTTP Client(Exception 1)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any advice appreciated.
Best Regards.Thanks, guys. Let me update my situation.
i checked and rechecked dest:// ABAP Proxy : Error in Call Adapter step!
For the error message of #3, i already attached message in my previous email.
And following is the error message of #2. Please HELP!!!
- Help
!http://BSDEA03.darwin.denka.co.jp:50000/sap/public/icman/img/theme.jpg|alt=SAP|width=122 height=61 border=0 |src=http://BSDEA03.darwin.denka.co.jp:50000/sap/public/icman/img/theme.jpg!
500 Internal Server Error
Internal Server Error(-1)
Error:
-1
Version:
6040
Component:
ICM
Date/Time:
Tue Jul 26 15:40:19 2005
Module:
icxxthrio.c
Line:
538
Server:
BSDEA03_PDX_00
Detail:
internal error occured
© 2001-2003, SAP AG
</FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 405, error text: ICM_HTTP_INTERNAL_ERROR)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Any advice appreciated.
Best Regards. -
Top Link error 17002 The Network Adapter could not establish the connection
I have installed an application developped in an another environnement.
I have created the database schema in my own database.
I have created a database connection to this schema.
I have reconciled the schema using this connection (so the database and the connection are available and correct from jdeveloper)
I have updated the Mapping to use the new connection and new generated the mapping status report without any errors
and i still have this error ! The Network Adapter could not establish the connection when i access any jsp document containing data from the database.
I check and recheck everything and all is correct ... sure something is wrong somewhere ... where is the question ...Sorry I think you didn't read the thread or you read it too fast !
I'm not a beginner and I know what the problem is but all the settings are correct in jdev and the database and the listener are running ... i'm able to browse the tables, seeing data reconciling objects with the database connection referenced in the top link descriptor
It seem that top link is using something else and i don't understand from where it took the connection description. -
Update error installing smart2go on N95
I've updated to the latest firmware (V11.0.026) and have downloaded the Generic Windows version of Smart2go as the N95 is not listed there but when I go to update it I always get an "Update Error!" notification.
Frustrating to say the least, it seems to be a problem nobody really knows the answer to
I've also tried the following:
1. formatted memory card, tried to reinstall with no success
2. tried to install smart2go before updating the firmware
3. just for the heck of it tried to reinstall pc suite. no success.
is there anybody who has had the same prob? please help.. i'm dying here.Hi chamzoo
I suggest you open GPS data application to monitor situation.
Go to Menu > Tools > Settings > GPS data > Position > Open > Options > Satellite status > Open:
You will see 5 empty rectangle outlines, you need a minimum of three solid black rectangles for triangulation, but usually get four for lock-on postion.
If you don't get any solid bars by 20 mins your GPS isn't working!
Start Maps on N95 and get satellite lock-on (RED CROSS on satellite icon bottom right disappears) location is then saved on closing application (get message above globe on screen)
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Update error 80070103 (HP ENVY m6 Notebook pc)
Hello
I have problem with:
''Advanced Micro Devices, Inc. - Graphics Adapter WDDM1.2 - AMD Radeon HD 7670M''
UPDATE ERROR WITH MESSAGE FAILED
I tried to do manual update but it also failed
Product name: HP ENVY m6 Notebook pc
Product number: E1A51EA#ABU
Total memory: 8.00 GB
Processor name: AMD A8-5550M APU with Radeon(tm) HD Graphics
Windows: 8.1
Thank You For Help!Hello
I have problem with:
''Advanced Micro Devices, Inc. - Graphics Adapter WDDM1.2 - AMD Radeon HD 7670M''
UPDATE ERROR WITH MESSAGE FAILED
I tried to do manual update but it also failed
Product name: HP ENVY m6 Notebook pc
Product number: E1A51EA#ABU
Total memory: 8.00 GB
Processor name: AMD A8-5550M APU with Radeon(tm) HD Graphics
Windows: 8.1
Thank You For Help! -
Firmware update error in 2 minute old ipod
Having just received a shiny new ipod back from apple service....i plug it in and it says it needs to be restored so i do!!
Now all the restore program says is firm ware update error after a very short time and the ipod shows the folder icon
Im seriously p*ssed off cos this has come straight from apple directly!!!
Is this an ipod problem or has my computer got some form of ipod virus or anti ipod problem???
Help Please I don't want to wait another 2 weeks
DaveTo save Mitch from alot of trouble trying to fix the error.
Go into 'My Computer', Right Click on any blank spot, Hit Properies. Click on the Hardware Tab, click the device Manager button, scroll down to Universial Serial Bus Controllers, click the plus. Do Any of them say 2.0 or Enchanced, if not, the firmware failure might be related to USB 1.1 .
If it does say Enchanced or 2.0 make sure the ipod is plugged into the back.
Firmware Failure Diskwrite Error(maybe a Update in there), is a somewhat of a general error, Can be connection issue related to how its connected, or it could be a problem with the iPods hard drive.
If still not working, time to test it on another PC(Or Mac) If you don't have one, go here:
http://www.apple.com/buy/locator/service.html
Type in your Zip Code, It will list the closest Apple Store or Authorized Apple Service Providers. -
MountainLion latest update errors half way through download on both Mac and Mac book pro.
I have been running Mountain Lion since late April this year on both my Mac and Macbook Pro. I have tried to download the latest update numerous times but halfway through it errors....I have tried it with two internet providers both Virgin and BT but the same result. Can anyone assist please. Also in the App store Mountain Lion Installer shows with the download feature. As I am already running Mountain Lion I dont understand this.....I trie to download it to see what happens but this erros also..I, not a great understander of computer terms ..just the basics so I anyone can assist perhaps you could consider this as I really want to understand what the problem is and fin a fix......Thanks for reading this...
Scottnsarah wrote:
I have the settings on the ipad2 and can update my data, but have no icon in which to view the info from my MacBook on it.
Also on my mac book pro I have to google iCloud in order to access it.
Type www.icloud.com into the url field of Safari. Hit return on the keyboard. See where that takes you. -
Windows Vista update error code 80070490
Hi there,
Can anyone help me with this issue! I've tried everything under the sun to fix this problem so I'm hoping you's more in the know than myself can help!!??Hi
This Vista update problem seems to be known to Microsoft:
+If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that's needed to install updates is corrupt. To correct this problem, you'll need to repair Windows. Repairing Windows won't damage your personal files or the programs that are installed on your computer.+
Here more details how to fix this issue:
[Windows Update error 80070490|http://windows.microsoft.com/en-us/windows-vista/windows-update-error-80070490]
Maybe you are looking for
-
Custom Target Reconciliation with child form entries in OIM 11g
Hello experts, I have developed custom scheduler code to reconcile users from target system to OIM. In this code I am using the API createReconciliationEvent(java.lang.String psObjectName, java.util.Map poData, boolean pbFinishEvent). If the reconcil
-
Greetings, I have an LV 8.6 HMI that performs Data Socket reads from Network Shared Variables. I am finding that it works well until I try to shut down and close all the DS references. I can usually get away with this once, but if I try to restart th
-
Best Practice: SAPGUI Version and Patch Upgrades
Hello - Does anyone have some thoughts/information on best practices relating to SAPGUI version and patch upgrades. Obviously, sometimes upgrades are forced upon us (e.g. 7.10 for Vista) and in other cases it may just be considered "nice to have". Ei
-
Getting rid of highlight around the border when a TableView gains focus
Hello, Is there a way remove the highlight around the border of a TableView when it gains focus? Thanks.
-
Query on field by capitalization
Can anyone tell me whether there is a way to query on a field based on whether the information is capitalized or not? I would like to get a list of records with information in the field that is in capitals, one for information that is all lowercase a