Update failed now itunes doesnt run

i performed the latest update and it failed but it seems to have uninstalled something that is allowing itunes to run. I can't open itunes and I cant install it again. the error that i get says the program can't star because msvcr80.dll is missing

Read this:
MSVCR80.dll missing, cannot install iTunes

Similar Messages

Tryed to update my iphone4s, the update fail, now itunes can not see my phone

tried to update my iphone4s, the update fail, now iTunes can not see my phone

Hi kjpservices,
So it sounds as if your iPhone does not appear in iTune after a failed update to iOS, is that right? In order to get it back into iTunes you will want to use one of these articles, depending on what kind of computer you have -
For a Windows PC, use this -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are using a Mac, use this -
iOS: Device not recognized in iTunes for OS X
http://support.apple.com/kb/TS1591
Once you get ths iPhone back into iTunes, try the update again. If it fails, post back and we can continue troubleshooting from there.
Thanks for using Apple Support Communities.
Best,
Brett L

HT201210 I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do?

I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do? I was working online and I recieved a pop up from iTunes stating that there was an harwared update for my iPhone. I had it plugged up for a while , long enoung for me to watch a tv show have dinner and come back. I thought the update was complete and came back to the computer and unplugged it. The next morning I saw a picture of aUSB cord and the iTunes icon. I have no use of my phone and cannot get access to emails, internet contacts..nothing . Help !

Well it should NEVER be unplugged when doing something.
It actually had not installed the software at that stage, it had been copied over to the iPhone, it was being checked and then it would be installed.
You need to connect your iPhone to the computer at home and hope that you can install the software again and then restore your backup.
If you install iTunes at work you may be able to Restore the software but you will most likely lose the content on your iPhone as you do not have a backup to restore on that computer, or all your media / apps.

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.

(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306

I had a itune update fail, now I get an error message (windows error 2). what do I need to do?

I had an itune update fail. now I get an error message. "windows error 2". I can not open itunes!

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Just updated now itunes doesnt detect iphone or itouch, why?

did the update last night on my iphone 4s and my touch 3rd gen. now itunes doesnt recognize either.

try that:
http://support.apple.com/kb/TS1567
Worked with me. Apple mobil device was off, i just start it.

I ran an itunes update, but now itunes won't open as it says it hasn't been installed correctly. How do I reinstall it?

I ran an itunes update, but now itunes won't open as it says it hasn't been installed correctly. How do I reinstall it?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
AndreaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Just installed the update and now iTunes wont open! Help!!!

Just installed the update and now iTunes wont open! Help!!!

See also Troubleshooting issues with iTunes for Windows updates.
tt2

I thought I was installing an update and now iTunes will not open? HELP!!!!!, I thought I was installing an update and now iTunes will not open? HELP!!!!!

I thought I was installing an update and now iTunes will not open on my computer... HELP!!!!

Others are more likely to help if you stop needlessly repeating yourself and provide some details.
What operating system? Windows (XP, Vista, 7) Mac
Any errors?
Also, try doing a search either here or via Google, you are more likely to get a faster resolution as there is no need to wait on others to respond.

Just reinstalled itunes due to need to fix msvcr80.dll error; now itunes wont run because itunes library.itl cant be read created by newer version itunes. how do i resolve this ?

just reinstalled itunes due to need to fix msvcr80.dll error;
now itunes wont run because itunes library.itl cant be read created by newer version itunes.
how do i resolve this ?

By way of experiment, let's first try specifically choosing a library for iTunes to open.
Quit iTunes if that error message is showing. Now hold down your Shift key, and then open iTunes. (Keep holding down the shift key while iTunes is opening.)
You should see a dialog asking you if you want to choose or create a library, as per the following screenshot:
Click "Choose Library ..."
You should now see a screen like the following screenshot:
Select the "iTunes Library.itl" file (shown circled in the screenshot) and click "Open".
Does your iTunes library open without the error?

I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

Hey Todd Rubenson,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows unexpectedly quitting. The following resource may provide a solution:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

Config Manager 2012 R2 Update Failed - Now What?

Starting Environment:
Windows Server 2012 VM
Configuration Manager 2012 CU1
SQL Server 2012 Enterprise SP1 installed on a separate 2 node cluster
We have been running this setup for Config Manager 2012 CU1 for about a year now with no issues at all. In an effort to deploy Windows 8.1 I ran the Configuration Manager 2012 R2 Update. The update failed halfway through. From the ConfigMgrSetup.log
it looks like it wasn't able to connect to the database and this is why the update failed. Problem is after the install failed I am no longer able to connect to the database when opening the CM console. I get the "Configuration Manager cannot connect
to the site" message. Here is the error from the SMSAdminUI.log:
[02/24/2014 19:10:21] :Transport error; failed to connect, message: 'The SMS Provider reported an error.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException\r\nThe SMS Provider reported an error.\r\n at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nConfigMgr Error Object:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'EPS'";
ProviderName = "WinMgmt";
Error Code:
ProviderLoadFailure
\r\nSystem.Management.ManagementException\r\nProvider load failure \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()\r\nManagementException details:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'EPS'";
ProviderName = "WinMgmt";
\r\n
[10, PID:6140][02/24/2014 19:10:21] :System.Management.ManagementException\r\nProvider load failure \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String methodClass, String methodName, Dictionary`2 methodParameters, Boolean traceParameters)\r\nManagementException details:
I have tried running the R2 update again but am now faced with the following 2 failures during run check:
Current SUM configuration uses virtual locations for some of the active SUPs. Please remove any virtual locations from the existing SUM configuration.
There is an active source hierarchy configured for migration. Please stop data gathering for each source site in the source hierarchy.
I do not know how I can fix these errors without being able to connect through the console.
Does anyone have any ideas on how I can reconnect the console to the database and eventually successfully run the R2 update?
Database itself seems fine. No errors. Database mounts fine.
Thanks in advance for any input.

Hi,
I saw a similar problem with yours. It should be helpful.
http://social.technet.microsoft.com/Forums/en-US/dda03cc4-e78e-409b-a9dd-f6d8a4f96774/upgrade-to-system-center-2012-sp1-prerequisite-check-failed-with-error-software-update-points-in?forum=configmgrsum
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

10.4.7 Update Failed, Now Software Update Broken

I tried to update from 10.4.6 to 10.4.7, but the update failed. I then tried the update via the package that was downloaded. No luck. Now, when I try to launch Software Update, it dies.
Any help would be great appreciated. I am pretty much a newbie at OS X (1.5 years), after using Windows for 15 years.
Here is the error report. Notice that it says I am running 10.4.7
Date/Time: 2006-07-03 17:28:51.113 -0500
OS Version: 10.4.7 (Build 8J135)
Report Version: 4
Command: Software Update
Path: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
Parent: WindowServer [67]
Version: 2.0.3 (2.0.4)
Build Version: 197
Project Name: SoftwareUpdate
Source Version: 1350000
PID: 2157
Thread: Unknown
Link (dyld) error:
image not found /System/Library/Frameworks/IOKit.framework/IOKit
Model: PowerMac8,1, BootROM 5.2.2f4, 1 processors, PowerPC G5 (3.0), 1.8 GHz, 2 GB
Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
iMac G5 rev. A Mac OS X (10.4.6) 2GB RAM

Hello Chad:
You do need to run repair disk from your software install DVD (you cannot repair a boot drive from the same drive). If that fails to repair errors, you have a couple of options.
Alsoft's DiskWarrior is the "gold standard" of directory repair (pricey at about $90, but worth it).
If you used a program like SuperDuper to create a bootable clone on your external HD, you simply need to restore it. If you do not have a bootable clone, you really cannot restore from the external HD.
If you do have your data backed up in some fashion (but not a bootable clone), I would suggest you run an archive and install (see above). A&I will install a fresh copy of OS X (you would have to update it, of course) and also preserves your own programs, files, and settings.
Barry

IPod Software Update failed with iTunes 7

Just installed iTunes 7 and after connecting to my iPod it wanted me to update to firmware 1.2 but everytime I click on download it fails.
"iTunes could not contact the iPod software update server because you are not connected to the Internet."
That is very funny because without the internt iTunes wouldn't even be able to get the information that an update is available....
So the diagnosis doesnt help anything either but I am posting it, maybe somebody has a idea:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Acer Aspire 3020
iTunes 7.0.0.70
Current user is an administrator.
Network Adapter Information
Adapter Name: {06AAC6DC-F406-423E-B7A6-EF5E6FC83222}
Description: Broadcom 802.11g Networkadapter - Packetplaner-Miniport
IP Address: 192.168.0.4
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: No
DNS Servers: 192.168.0.1
Network Connection Information
Active Connection: (none)
Connected: No
Online: No
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Current firmware version is 1.1.1
Windows XP

I just downloaded itunes 7 and connected my 60gb ipod. It updated songs and offered me the chance to get CD covers, which i did successfully. It the offered me Ipod updater 1.2 which i said yes to but it then informs me that it could not complete as ipod already in use by another application!!! I tried to reset but with the same result...help please

Update failed now itunes doesnt run

Similar Messages

Maybe you are looking for