Update failure Error codes -1 and -35
Tried to update the ios so I could download some new apps and Ive had nothing but troubles. I keep getting error code -1 at update and today tried restoring and I received error -35 that pretty much said --ok--Ill restore it, but don't blame me if your ipod doesn't function afterwards. Is anyone familiar of these errors and what theyre caused from? Is iy something I can fix?
Error (-1)
Try on another computer
Also see:
iOS: If you can't back up or restore from a backup in iTunes
Then see:
-1 error
-1 error too
If still problem that means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
CS6 update failure - error code U44M1I210
Hi,
I've not been able to install any updates of any of the CS applications, since purchase. They all fail, with the same error code. Can anyone help with this? The full text of the log is below. Thank you for shedding any light!
Dominic.
DPS Desktop Tools CS6 28.0.0 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Dreamweaver CS6 (to version 12.0.3) to address HiDPI-compliance and resolve critical bugs.
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Extension Manager 6.0.7 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe Photoshop 13.0.6
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe InDesign CS6 8.0.2 updates
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe CSXS InfrastructureCS6
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe Illustrator CS6 Update (version 16.0.4)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe Media Encoder CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Photoshop Camera Raw 8.2(CS6)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210I have asked the same question a year ago and again just a week ago. It seems that nobody knows and nobody cares. I suggest we should try to find a group of people who share this problem and try to seek support from a international consumer rights institution if such institution exists.
Only explanation I can think of is that either the updaters are poorly coded or more obviously some users combination of software and firewall/anti-virus is just too much for the updaters. I've tried to make special rules with my Norton, but without success. Most probably you'll be adviced to try different versions of updaters or get involded with endless uninstall and install operations. Intersesting to follow how this case unfolds. -
Cloud Update Failure: Error Code A12E1
I tried to update the Cloud app. I get this error.
"We've encountered the following issues:
Sorry, there seems to be a problem with the installation process (Error Code: A12E1). For troubleshooting tips, please visit our support page."
So here I am. I have no idea what to do.
Hardware Specs:
Mac 10.8.4
2.66GHz Intel Core i7
8GB 1067MHz DDR3
No external drivesI ran into this issue recently myself when I was applying the lastest updates to CC:
Error Code: A12E1)
I thought the fix recommended - running the cleaner and/or reinstalling the entire Suite, etc - was a little bit extreme. I was able to apply the update in a round about manner. I didn't have time to do a complete reinstall just to fix a couple of photos.
Issue: When applying the update to Creative Cloud you get the error about 3/4 of the way through the upgrade:
"We've encountered the following issues:
Sorry, there seems to be a problem with the installation process (Error Code: A12E1). For troubleshooting tips, please visit our support page."
Tried again after a reboot. Same error.
HERE IS MY FIX:
I am Running Lion, and this is what worked for me:
Resolution:
1. Restarted the Mac, telling it NOT to open the programs on reboot
2. Opened Photoshop
3. Went to Help and selected updates...
4. Launched the update through Photoshop. It ran through and updated the applications.
After I was done, I noted the CC update indicator next to the clock went away. I also noted that when I launched Photoshop from Lightroom I didn't get the error saying my Adobe Raw was out of date which is what prompted the update in the beginning.
I should note that when I did this I got an error saying some library was open so I canceled the upgrader and closed out of the program I forgot to close, so make sure this is a clean restart. -
Windows update issue error code 8020002E and 80004005
Hi
I have a virtual machine(on Hyper V) with Windows 2008 R2 Standard When I did windows update it installed few of the updates and then started giving me the following err code 8020002E and 80004005.
Points which i noticed are
In the event viewer it is giving the following log
Log Name: Application
Source: Windows Error Reporting
Date: 9/5/2011 11:13:35 AM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: RHFPSR01.awa.com
Description:
Fault bucket , type 0
Event Name: WindowsUpdateFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: 7.5.7601.17514
P2: 80004005
P3: 73A58E93-789F-410C-9D7F-CE577CBF2903
P4: Download
P5: 101
P6: Unmanaged
P7:
P8:
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_7.5.7601.17514_26e7933eebd8759397facf9153f187d87feece5_0097a03b
Analysis symbol:
Rechecking for solution: 0
Report Id: f3401ae7-d796-11e0-8670-00155d322f01
Report Status: 4
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-05T08:13:35.000000000Z" />
<EventRecordID>5149</EventRecordID>
<Channel>Application</Channel>
<Computer>RHFPSR01.awa.com</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>0</Data>
<Data>WindowsUpdateFailure</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>7.5.7601.17514</Data>
<Data>80004005</Data>
<Data>73A58E93-789F-410C-9D7F-CE577CBF2903</Data>
<Data>Download</Data>
<Data>101</Data>
<Data>Unmanaged</Data>
<Data>
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_7.5.7601.17514_26e7933eebd8759397facf9153f187d87feece5_0097a03b</Data>
<Data>
</Data>
<Data>0</Data>
<Data>f3401ae7-d796-11e0-8670-00155d322f01</Data>
<Data>4</Data>
</EventData>
</Event>
Secondly when i downloaded the service pack 1 separetly and installed, it got installed without any err.
Basic trouble shooting i have done like
1>reset windows update component
2>Clean boot up option also
but it did not work please can any one help me with this issue
ThanksHi,
I would like to suggest you perform the following steps to troubleshoot this issue:
1.
Stop the Windows Update service temporarily.
2.
Run the following commands to rename the SoftwareDistribution directory.
cd %windir%
ren SoftwareDistribution SDTemp
exit
3.
Start the Windows Update service.
If the issue persists, please also reset Windows Update components and run System Update Readiness Tool. For the detailed steps, please refer to the
following Microsoft KB articles:
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2
http://support.microsoft.com/kb/947821
If some system files cannot be fixed by System Update Readiness Tool, please also refer to the following Microsoft TechNet article for how to replace
them.
Advanced guidelines for diagnosing and fixing servicing corruption
http://technet.microsoft.com/en-us/library/ee619779(WS.10).aspx
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Windows Update Error Code 80070663 and 64C
I am running x64 Vista on an HP Pavillion dv9000 laptop.
I was cleaning up my desktop when I saw a Word doc I didn't recognize. I tried to open it and got a Windows Installer window saying "Preparing to Install". I have an activated, legal version of Microsoft Office 2007. This is the first time
I've seen that window pop up. I let it try to install whatever it's trying to install and it comes up with an error: "This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application
vendor to verify that this is a valid Windows Installer update package." I am the administrator on this computer. I have full access to all files.
This prompts me to start Windows Update to see if that will fix it. That's where the error codes come in. The windows updates: "Microsoft .NET Framework 3.5 Family Update (KB959209) x64" and "Security Update for Microsoft Visual C++ 2008 Service
Pack 1 Redistributable Package (KB2538243) yielded the error codes 80070663 and 64C.
I noticed when I press Start, the power button occasionally says "Installs Updates then Shuts Down". I didn't click it because I had work open I needed to work on later. Then when I left the computer and came back, the power button didn't have
the shield on it that said "Installs Updates then Shuts Down". I shut down my computer anyway and it didn't install any updates, and this is where I'm at. I've retried installing the updates via Windows Update and it still shows the original error
codes.
I've researched this error and came across Microsoft Fix It, downloaded as: "MicrosoftFixit.wu.LB.137269729445221149.2.1". I've run it and it did not solve the problem.
Please help,
JakeJake, did you ever find a solution to your problem? I'm afraid I can't help if you didn't, but I'm experiencing the same problem.
I also run Vista and had no problems until recently when I had an installation failure on 12th April 2014 for the same two updates:
Microsoft .NET Framework 3.5 Family Update (KB959209) x86 - (Installation status: Failed. Error details: Code 80070663)
Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) - (Installation status: Failed. Error details: Code 64C)
I don't know whether it's these updates that caused the problem or an earlier update that has stopped these updates been installed. The PC is generally working but Word & Excel don't load any more. I get a 'Preparing to install' popup follwed by
the message: 'This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.'
If you did find a solution or any one else knows of one then I'd be very grateful.
Dave. -
Client not updating - Error Code # 0x80244023 and 0x801901f8
Hello All,
We have a Windows server (2008) which is not pulling updates from WSUS server. It has two NICs - one is public and another is configured with
172.x.x.x range for Admin use (this is for WSUS communication with no DNS setup).
See logs below,
2014-05-07 13:05:50:089 916 1410 Misc
=========== Logging initialized (build: 7.6.7600.256, tz: +0800) ===========
2014-05-07 13:05:50:089 916 1410 Misc
= Process: C:\Windows\system32\svchost.exe
2014-05-07 13:05:50:089 916 1410 Misc
= Module: c:\windows\system32\wuaueng.dll
2014-05-07 13:05:50:089 916 1410 Service *************
2014-05-07 13:05:50:089 916 1410 Service ** START
** Service: Service startup
2014-05-07 13:05:50:089 916 1410 Service *********
2014-05-07 13:05:50:091 916 1410 Agent
* WU client version 7.6.7600.256
2014-05-07 13:05:50:092 916 1410 Agent
* Base directory: C:\Windows\SoftwareDistribution
2014-05-07 13:05:50:092 916 1410 Agent
* Access type: Named proxy
2014-05-07 13:05:50:092 916 1410 Agent
* Default proxy: proxy:8083
2014-05-07 13:05:50:093 916 1410 Agent
* Network state: Connected
2014-05-07 13:05:50:520 916 1410 DtaStor Default service
for AU is {00000000-0000-0000-0000-000000000000}
2014-05-07 13:05:50:531 916 1410 DtaStor Default service
for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-07 13:05:50:539 916 1410 Agent
WARNING: Failed to read the service id for re-registration 0x80070002
2014-05-07 13:05:50:539 916 1410 Agent
WARNING: Missing service entry in the backup data store; cleaning up
2014-05-07 13:06:01:251 916 1594 Report
CWERReporter::Init succeeded
2014-05-07 13:06:01:251 916 1594 Agent
*********** Agent: Initializing Windows Update Agent ***********
2014-05-07 13:06:01:253 916 1594 Agent
*********** Agent: Initializing global settings cache ***********
2014-05-07 13:06:01:253 916 1594 Agent
* WSUS server: http://172.16.74.28
2014-05-07 13:06:01:253 916 1594 Agent
* WSUS status server: http://172.16.74.28
2014-05-07 13:06:01:253 916 1594 Agent
* Target group: (Unassigned Computers)
2014-05-07 13:06:01:253 916 1594 Agent
* Windows Update access disabled: No
2014-05-07 13:06:01:253 916 1410 Report
*********** Report: Initializing static reporting data ***********
2014-05-07 13:06:01:253 916 1410 Report
* OS Version = 6.1.7601.1.0.196626
2014-05-07 13:06:01:253 916 1594 DnldMgr
Download manager restoring 0 downloads
2014-05-07 13:06:01:253 916 1410 Report
* OS Product Type = 0x0000000A
2014-05-07 13:06:01:260 916 1594 AU
########### AU: Initializing Automatic Updates ###########
2014-05-07 13:06:01:261 916 1594 AU
# WSUS server: http://172.16.74.28
2014-05-07 13:06:01:261 916 1594 AU
# Detection frequency: 1
2014-05-07 13:06:01:261 916 1594 AU
# Approval type: Pre-install notify (Policy)
2014-05-07 13:06:01:261 916 1594 AU
# Auto-install minor updates: Yes (Policy)
2014-05-07 13:06:01:261 916 1594 AU
# Will interact with non-admins (Non-admins are elevated (Policy))
2014-05-07 13:06:01:384 916 1410 Report
* Computer Brand = VMware, Inc.
2014-05-07 13:06:01:384 916 1410 Report
* Computer Model = VMware Virtual Platform
2014-05-07 13:06:01:390 916 1410 Report
* Bios Revision = 6.00
2014-05-07 13:06:01:390 916 1410 Report
* Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-05-07 13:06:01:390 916 1410 Report
* Bios Release Date = 2012-07-09T00:00:00
2014-05-07 13:06:01:390 916 1410 Report
* Locale ID = 1033
2014-05-07 13:06:01:392 916 1594 AU
Successfully wrote event for AU health state:0
2014-05-07 13:06:01:392 916 1594 AU
Initializing featured updates
2014-05-07 13:06:01:392 916 1594 AU
Found 0 cached featured updates
2014-05-07 13:06:01:392 916 1594 AU
Successfully wrote event for AU health state:0
2014-05-07 13:06:01:395 916 1714 Report
WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{1EDE8AC5-7759-45EC-9747-C62989CBAEF4}.bin for reading with hr = 80070002.
2014-05-07 13:06:01:396 916 1714 Report
WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{EEE2278A-AE78-4886-96CF-5C5946BA8699}.bin for reading with hr = 80070002.
2014-05-07 13:06:01:396 916 1594 AU
Successfully wrote event for AU health state:0
2014-05-07 13:06:01:396 916 1594 AU
AU finished delayed initialization
2014-05-07 13:06:01:397 916 1594 AU
Triggering AU detection through DetectNow API
2014-05-07 13:06:01:397 916 1594 AU
Triggering Online detection (non-interactive)
2014-05-07 13:06:01:397 916 1410 AU
2014-05-07 13:06:01:397 916 1410 AU
## START ## AU: Search for updates
2014-05-07 13:06:01:397 916 1410 AU
2014-05-07 13:06:01:399 916 1410 AU
<<## SUBMITTED ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07 13:06:01:399 916 1714 Agent
2014-05-07 13:06:01:399 916 1714 Agent
** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 13:06:01:399 916 1714 Agent
2014-05-07 13:06:01:399 916 1714 Agent
* Online = Yes; Ignore download priority = No
2014-05-07 13:06:01:399 916 1714 Agent
* Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation'
and RebootRequired=1"
2014-05-07 13:06:01:399 916 1714 Agent
* ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07 13:06:01:399 916 1714 Agent
* Search Scope = {Machine}
2014-05-07 13:06:01:399 916 1714 Setup
Checking for agent SelfUpdate
2014-05-07 13:06:01:400 916 1714 Setup
Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 13:07:03:952 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:07:03:952 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:07:22:828 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:07:22:828 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:09:02:845 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:09:02:845 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:10:02:451 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:10:02:451 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:10:02:451 916 1714 Misc
WARNING: DownloadFileInternal failed for http://172.16.74.28/selfupdate/wuident.cab: error 0x801901f8
2014-05-07 13:10:02:452 916 1714 Setup
WARNING: SelfUpdate check failed to download package information, error = 0x80244023
2014-05-07 13:10:02:452 916 1714 Setup
FATAL: SelfUpdate check failed, err = 0x80244023
2014-05-07 13:10:02:452 916 1714 Agent
* WARNING: Skipping scan, self-update check returned 0x80244023
2014-05-07 13:10:02:452 916 1714 Agent
* WARNING: Exit code = 0x80244023
2014-05-07 13:10:02:452 916 1714 Agent
2014-05-07 13:10:02:452 916 1714 Agent
** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 13:10:02:452 916 1714 Agent
2014-05-07 13:10:02:452 916 1714 Agent
WARNING: WU client failed Searching for update with error 0x80244023
2014-05-07 13:10:02:453 916 ae8 AU
>>## RESUMED ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07 13:10:02:453 916 ae8 AU
# WARNING: Search callback failed, result = 0x80244023
2014-05-07 13:10:02:453 916 ae8 AU
# WARNING: Failed to find updates with error code 80244023
2014-05-07 13:10:02:453 916 ae8 AU
2014-05-07 13:10:02:454 916 ae8 AU
## END ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07 13:10:02:454 916 ae8 AU
2014-05-07 13:10:02:457 916 ae8 AU
Successfully wrote event for AU health state:0
2014-05-07 13:10:02:457 916 ae8 AU
AU setting next detection timeout to 2014-05-07 06:08:08
2014-05-07 13:10:02:457 916 ae8 AU
Successfully wrote event for AU health state:0
2014-05-07 13:10:02:458 916 ae8 AU
Successfully wrote event for AU health state:0
2014-05-07 13:10:02:463 916 1714 Report
CWERReporter finishing event handling. (00000000)
2014-05-07 13:10:07:452 916 1714 Report
REPORT EVENT: {E1B169E2-C0FC-4D33-A70B-41F76CB362B9} 2014-05-07 13:10:02:452+0800 1 148 101
{D67661EB-2423-451D-BF5D-13199E37DF28} 1 80244023 SelfUpdate
Failure Software Synchronization Windows Update Client failed to detect with error 0x80244023.
2014-05-07 13:10:07:462 916 1714 Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-05-07 13:10:07:463 916 1714 Report
WER Report sent: 7.6.7600.256 0x80244023 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-05-07 13:10:07:463 916 1714 Report
CWERReporter finishing event handling. (00000000)
I verified through Nslookup and found WSUS server IP and name does not resolved. However, the download manager window is opening up while accessing
- http://172.16.74.28/selfupdate/wuident.cab from server browser.
Please help.2014-05-07 13:06:01:395 916 1714 Report WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{1EDE8AC5-7759-45EC-9747-C62989CBAEF4}.bin
for reading with hr = 80070002.
This type of error is quite often symptomatic of a corrupted WUA datastore.
2014-05-07 13:07:03:952 916 1714 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with
0x801901f8
The 0x801901F8 is an HTTP 504 -- "request timed out waiting on a gateway".
2014-05-07 13:06:01:253 916 1594 Agent * Target group: (Unassigned Computers)
2014-05-07 13:06:01:261 916 1594 AU # Detection frequency: 1
When using Server-Side Targeting, this value should be at least 2 hours. Based on the above three observations, I recommend the following response:
Verify that the routing table is correct and that requests for 172.16/16 are actually leaving on the correct NIC.
Change the Detection Frequency to at least 2 hours (until you fix the communication issue it might as well be 22 hours!).
Run wuauclt /resetauthorization /detectnow.
If the 0x80070002 error persists, do the following:
Stop the Windows Update service.
Rename %windir%\SoftwareDistribution to SoftwareDistribution.OLD.
Start the Windows Update service.
Run wuauclt /resetauthorization /detectnow and observe the results. If the issue is resolved, copy the ReportingEvents.log from SoftwareDistribution.OLD back to the new SoftwareDistribution.
If the issue is not resolved, post that detection event for further analysis.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Windows Updates Error Codes 80070308 and 80070643
Recently I have a problem with windows updates patches for this month (June 2014). I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643. I tried to disable the Symantec Endpoint, used the Microsoft
.NET Framework Repair Tool to fix the .Net Framework related error but still have failure. I can still finish all the failed patches by rescanning the PC than install them; however; I still have 40 PCs need to be patched. How do I prevent
the installation failure, all the PCs have no problem at last month. Any suggestion, many thanks.Hi,
If your computer is having problems finding and installing operating system update, I suggest to
try the windows update troubleshooter.
To run a Windows Update troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
An automatic troubleshooter is available that fixes some problems with Windows Update, and it might resolve this error for you
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
this error can appear when installing updates for Microsoft Office 2003,
to fix Windows update with error code:80070643:
http://windows.microsoft.com/en-us/windows/windows-update-error-80070643#1TC=windows-7
If your computers are in a domain environment and get updated by a WSUS server, I suggest to update the group policy with the command “gpupdate /force”.
Meanwhile, if it doesn’t help, please upload the Windowsupdate.log at: C:\Windows, this will give detail error information for further support.
Regards
Wade Liu
TechNet Community Support -
Frozen ipod after new updates, will not recover, error codes 1601 and 1602
i updated my ipod last night, was working fine, turned off, then on again this morning. was working fine this morning for a while, then went completely blank, will not start up, just completely dead. i have tried to restore,several times and get error code 1601, and 1602. have tried restarting my computer,checking for updates, restarting my itunes, using another computer, tried another lead, and everything else suggested by support. it will just not do anything. has anyone got any suggestions, please.
I would suggest that you put your iPod into the recovery mode and restore it. Next time something like this, it is better to start with the more basic troubleshooting steps first before trying to restore. The two easiest are restart and reset.
Try these steps with your touch.
1. Unplug the device from your computer
2. Turn the touch off - hold the Sleep/Wake button down until you see the red slider and turn the device off. Note: this may not work. If not, go to the next step.
3. Start iTunes
4. Hold the Home button down and keep holding it down while you plug your iPod back into your computer.
5. Keep holding the button down until iTunes tells your "that an iPod in Recovery mode has been detected".
6. Let go of the button and follow the on screen instructions to restore the touch. -
I'm having problem downloading the complete suit. Only 41% has downloaded and it says this "Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support
Meresianak73703965 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application to reinstall the Creative Cloud Desktop application?
-
what is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
Above from:
http://support.apple.com/kb/TS3694 -
ERROR CODE 50 AND 54 AFTER UPDATING TO IOS 5
I updated my iPhone 4 to ios5 and when it was restoring iTunes said the restore was interrupted and error code 50 and 54. I lost current photos and some apps although iTunes had reported that my phone was backed up. Has anyone else received these errors and how can I fix it?
Not sure why, but have you taken the troubleshooting steps recommended in the User Guide (restart, reset, restore)?
-
Can anyone provide Error code list and causes for OBIEE10g/11g ?
Hi
Can anyone provide Error code list and causes for OBIEE10g/11g ?
Regards
Srini
Edited by: Srini on Feb 18, 2012 10:41 AMHi,
List of Bug Fixes Included In OBIEE 11.1.1.5.0
Admin Tool
•7538753 SAP BW IMPORT DOES NOT RETRIEVE UNIQUE NAME FOR MEASURE COLUMNS
•10012297 ADMIN TOOL CRASH ON VERY LARGE EXPRESSIONS – OVERFLOW AT APPROX 3200 CHARACTERS
•10032385 TABLE MISSING IN SQL “FROM” CLAUSE – FWD PORT 8308443 TO 11G
•10045212 EQUALITY EXPRESSION IN LTS “WHERE” CAUSES INTERNAL SQORRQLIST ERROR ON QUERY
•10264475 ADMINISTRATION’S “SHUTDOWN SERVER” MENU SHOULD BE REMOVED
•10265121 ADMIN TOOL EXPRESSION BUILDER CRASHES ON DOUBLE-BYTE LOGICAL COLUMN NAME
•10394725 ON-LINE MODE CHECK-IN OF DYNAMIC INIT BLOCK CAUSES [43058] REFRESH LOCK FAILURE
Answers
•6521146 ERROR: “NO FILTER” WHEN USING “COMBINE WITH SIMILAR REQUEST” – UNION
•7534635 INACTIVATING DRILLDOWN ON COLUMN VALUE ALSO INACTIVATES COLUMN HEADER LINK
•9026854 CLARIFICATION REGARDING DATA FORMAT WHEN COMBINING REQUESTS
•9107277 KEEP THE NUMBER PRECISION IN DATABASE WHEN “DOWNLOADING TO EXCEL”
•9524080 PIVOT TOTAL DIFFERENT TO TABLE TOTAL WHEN REPORTAGGREGATEENABLED TRUE
•9697529 JAPANESE CHARACTER SET NOT PASSED CORRECTLY TO DRILL REPORT IN FIREFOX BROWSER
•9871470 SORTING ON A NULL VALUED COLUMNS GIVES ASSERTION ERRORS
•9886904 CORRECT DOC FOR ADDING CUSTOM DATE FORMAT STRING
•9918283 CORRECT DASHBOARD FORMATTING PROBLEMS WITH SCROLLING
•9928318 ROW HEADER MISSING AT PIVOT TABLE VIEW FOR MIGRATED REPORTS IN 11G
•9968574 SOME UPGRADED 10G CHARTS SHOW UP JAVA EXCEPTION
•10023165 MAPS DO NOT WORK IN MAP VIEWS WHEN JOIN COLUMN CONTAINS A “&” CHARACTER
•10065166 GAUGE RANGE IS NOT UPDATED WHEN IT CHANGES THE FIELD VALUE
•10078041 ACTION LINK DOES NOT WORK WHEN COMPOUND LAYOUT ONLY HAS A MAP VIEW
•10091354 “SCALE MARKERS” OPTION IS MISSING IN VERTICAL AXIS 2
•10147762 CANNOT SET GAUGE FOOTER (TITLE), KEEPS SHOWING “UNDEFINEDUNDEFINEDUNDEFINED”
•10182955 BUBBLE CHART IS NOT BEHAVING AS EXPECTED
•10213761 CONDITIONAL DASHBOARD SECTIONS (GUIDED NAVIGATION) ALWAYS RUNS REPORTS
•10229397 CANNOT SAVE REQUEST USING STANDARD DATE FORMATS.
•10282140 CELL IMAGE AT BLANK CELL OF PIVOT TABLE IS NOT DISPLAYED WHEN USING COND FORMAT
•10296730 UNABLE TO USE PRESENTATION VARIABLE IN SCALE MARKERS
•10312496 CHARTS. MEASURE LABEL IN GRAPH PROMPTS DOES NOT CHANGE CONTENT OF THE CHART
•10312795 ACTION LINK ON COLUMN HEADING NAVIGATION DOES NOT CONSIDER PROMPT VALUES
•10329343 CLICKING A LINE GRAPH BETWEEN TWO DATA POINTS DRILLS TO LAST VALUE IN HORIZONTAL
•10337649 PIVOT TABLE SHOWS BUTTONS FOR SORTING ON CALCULATED ITEMS.
•10402102 INCORRECT RESULT WHEN USING [NEW CALCULATED ITEM] PROP IN PIVOT TABLE
•10414887 DRILL DOWNS NOT WORKING IN CHART PIVOTED TABLE SELECTED FROM VIEW SELECTOR
•10418875 CHART SIZE IS CHANGING AFTER WEBCAT UPGRADE FROM 10G
•10634175 GRAPH ENGINE IS NOT RESPONDING
•10639913 COMPLETE TEXT IS NOT SAVED IN DB IF CURSOR IS MOVED AWAY DURING INSERT
•11711658 FILTER NEEDS TO SUPPORT UNTYPE LITERAL FOR RANK OPERATOR AS 10G DOES
•11805468 CUSTOMIZED GAUGE VIEW IS NOT CONSISTENT WHEN EXPORTED AS PDF,HTML AND XLS
•11817696 INCORRECT FILTER IS BUILT IF FILTER IS CONTRUCTED BEFORE SELECTING REQ. COLUMNS
•11845286 PIVOT TABLE WITH PERCENTAGES, GRAPHED PERCENTAGE VALUES DISPLAYED ARE INCORRECT
•11894921 GRAPH LABEL OPTIONS NOT AVAILABLE IN 11G
•11895279 INCORRECT FILTER VALUE WHEN USING ACTION LINK WITH GRAPH
•12412666 ALL PAGES LOSES CONDITIONAL FORMATTING
•12561361 PSE FOR BASE BUG 10295403 ON TOP OF 11.1.1.5.0 FOR GENERIC OS
CHARTING
•8990756 MISLEADING INFORMATION IN DOC REGARDING PIVOT TABLE SETTINGS
DASHBOARDS
•7459700 ABILITY TO SPECIFY FIXED COLUMN WIDTH TO A DASHBOARD PROMPT
•10177865 OBIEE 11G : DEFAULT VALUES CANNOT BE DE-SELECTED FROM MULTI SELECT PROMPT
•10279722 DASHBOARD SLIDER PROMPT SHOWS THUMB VALUES WITH TWO DECIMAL PLACES FOR INTEGERS
•10279829 DASHBOARD SLIDER PROMPT SHOWS WRONG VALUES FOR “ALL COLUMN VALUES” OR “SPECIFIC
•10310511 “REQUIRE USER INPUT” MESSAGE APPEARS THE FIRST TIME ONLY FOR THE REQUIRED PROMPT
•10389799 DASHBOARD NAVIGATION MAY CAUSE GETELEMENTBYTAGNAME ERROR IN IE
•10411545 PROMPT WITH BETWEEN OPERATOR AND SQL DEFAULT VALUES ARE NOT UPGRADED PROPERLY
•11056057 ERROR WHILE UPGRADING THE DASHBOARD WITH CERTAIN FILTER FUNCTIONS
•11076452 ABILITY TO CONSTRAIN PROMPTS AGAINST A SLIDER PROMPT
•11717024 ERROR 500 OCCURS WHEN SETTING ACCESSIBILITY MODE TO ON
•12620143 PSE FOR BASE BUG 12561330 ON TOP OF 11.1.1.5.0 FOR LINUX X86 [46] (PSE #602152)
INSTALL
•9459177 PREREQUISITES FOR DEPLOYMENT ON SEPARATE MACHINES
•9540009 UNIXCHK.SH ENCOUNTERS HOST NOT FOUND ERROR WHEN DNS IS NOT AVAILABLE.
•10071302 ENTERPRISE INSTALL: CONFIGURE PORTS : FORMAT OF INI FILE
•10126542 OBIEE 11G INSTALATION FAILS AT AS INSTANCE CREATION DUE TO PERM SIZE ERROR
•10287335 CANNOT START BISERVER1 . SWITCH TO JSSE FRAMEWORK REQUIRED
•10302421 OBIEE 11G WINDOWS PROMPTS FOR USERNAME / PASSWORD AFTER ENCRYPTING CREDENTIALS
•11849674 SAG: DISCREPANCY IN DOCUMENTED ORACLE DATABASE REQUIRED FOR MAPVIEWER
MIGRATION
•7432799 ORACLE EUL CONVERTER CRASHED WHILE GENERATING A REPOSITORY
REL_NOTES
•12604761 TWO STEPS OF THE UPGRADE TO 11.1.1.5.0 ARE NOT CLEARLY DOCUMENTED
SCHEDULER
•10036466 “RE-RUN INSTANCE(S) NOW” MENU IS NOT AVAILABLE FOR COMPLETED JOB INSTANCES
SECURITY
•8996295 PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENTIFICATION
•9216995 PROVIDE LATEST DETAIL INFORMATION ABOUT HOW TO SETUP LDAP SSL FOR OBIEE
•10194154 TECHNOTES- PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENT
•10198837 BIEEHOME LOGIN PAGE IS NOT DISABLED EVEN AFTER ENABLING THE SSO
•10218031 USING EXTERNAL DB TABLE TO SET ROLES SESSION VARIABLE DOESN’T ACCEPT LONG NAMES
•10373788 IF OBJECTGUID PUBLISHED AND SAMACCOUNTNAME CHANGED USER CANNOT CONNECT ANYMORE
•11731080 QA:SECURITY GUIDE NEEDS UPDATE FOR DEFINING A USER SESSION VARIABLE
SERVER
•6510747 NETWORK FAILURE DURING PHYSICAL QUERY HANGS END USER WITHOUT ERROR MESSAGE
•6836444 OBIEE SERVER SYSTEM DATE IS WRONG AND DOES NOT MATCH MACHINE SYSTEM DATE
•8371912 BI SERVER CRASHES ON NAVIGATION SPACE MAP RACE – SR 3-887711721
•9433198 DOCUMENT SYSLOG ENTRIES IN SYSTEM ADMINISTRATOR’S GUIDE
•9696424 DOC INSTANCECONFIG PARMS ALLOWEDLANGUAGES & ALLOWEDLOCALES IN SYSADMIN GUIDE
•9954411 PSR:MOD_SUPPORTED NOT ENABLED FOR TERADATA AND CAUSES CAMPAIGN SLOW PERFORMANCE
•10258683 REQUEST WITH COMPLEX FILTER IS CONSUMING ALMOST ALL CPU & NO SESSION IS CREATED
•10258755 EXCEL FAILS TO CONNECT TO 11G BI SERVER USING ODBC DSN
•10335924 REPORT-BASED TOTALS FAIL ON MEASURES CONTAINING AGGREGATION EXPRS SUCH AS FILTER
•10374571 NEED FLEXIBILITY TO OVERRIDE HOSTNAMES WHEN CUSTOMER DNS IS INCORRECT OR BROKEN
•10650122 PIVOT VIEW WITH UNION OF NON – COMPATABLE TYPE ERROR IN OBIEE 11G AFTER UPGRADE
•11804596 NQQUERY LOG LEVEL 2 IS TOO VERBOSE – BACKPORT 10308263 TO 11.1.1.5
•11809295 NQUDMLGEN NOT GENERATING UDML FILE IN UTF FORMAT
UPGRADE
•9886765 ERRORS ENCOUNTERED WHEN UPGRADING WEB CATALOG USING UA.BAT
•10121344 ERROR IN LOG USING UA TO UPGRADE BI SCHEDULER SCHEMA ON SQL SERVER DATABASE
•11069928 UPGRADE SHOULD HANDLE PROMPT WITH INCONSISTENT VALUES AS 10G DOES
WEB_ADMIN
•8564456 SHARED FOLDER ACCESS PERMISSION ISSUE
•9381764 CATALOG MANAGER COPY FUNCTION NOT WORKING AS EXPECTED
•9739865 EXITING MANAGE SESSION RESULTS IN HTTP ERROR
•10016252 LACKING INFORMATION ON FORCEABSOLUTECOMMANDURL FOR ABSOLUTECOMMANDURLPREFIX
•10144989 WEB CATALOG DOES NOT UPGRADE TO 11.1.1.3.0
•10218524 VALIDATION ERROR AFTER THE UPGRADE OF WEBCATALOG TO OBIEE 11G
•11723425 INCORRECT DEFAULT VALUE OF DEFAULTROWSDISPLAYED IN THE INSTANCECONFIG.XML
•11827202 OPMN NOT STARTING AFTER SETTING UP THE REPLICATION AGENT
WEB_GNRL
•10191078 FILTER VALUES ARE RESET IN GO URL WHEN COLUMNS ARE SORTED OR RE-ARRANGED
•10360461 NEED ABILITY TO CONTROL NEW, DASHBOARD AND OTHER HEADER LINKS
•11780508 10G COLUMN FILTER PROMPT WITH PROMPTCAPTION ATTR NOT UPGRADING
•12416695 TOOLTIP EMPTY IN MAPVIEWER
WEB_INTGRT
•10294759 FMAP-REFERENCED IMAGES IN ANALYSIS HEADERS DON’T APPEAR IN DOWNLOADS TO EXCEL
WEB_MKTG
•8692820 DIRECT DATABASE CAMPAIGN LOAD FORMAT COMBINED LISTS FAILS
•9908019 SAW SERVER CRASH WHEN LOADING A PARTICULAR CAMPAIGN
•9935859 UNGROUP OF SEGMENT BLOCKS CORRUPTS SEGMENT DEFINTION AND BAD COUNTS
•10331355 MOVING CRITERIA WITHIN A SEGMENT’S GROUP CORRUPTS THE INCLUSION OPTIONS
Thanks,
RM -
RMMR1MRS-When run in background cause update failure errors looking
hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.Have you found a solution already? If so, please, share it with the community and close this thread.
-
Creative Cloud desktop failed to update.(Error code: 1)
Hello, I'm running a MacBook Pro Retina with Yosemite 10.10.2. I tried to update Creative Cloud Desktop manager and then tried to cancel it (it was killing my bandwidth while I was trying to work). It disappeared from the bar at the top of the OSx screen.
I couldn't get it back. I restarted my machine. When I clicked on Creative Cloud this time, I was prompted to update, but almost immediately got an error. There are other mentions of Error Code 1 on the forum, but they appear to be first time installations, not updates. Suggestions welcome! Thanks
Creative Cloud desktop failed to update.(Error code: 1)
Update:
Still no success. I tried the instructions here: Error "Failed to Install" Creative Cloud Desktop application which says to uninstall Creative Cloud. I got an error: "Unable to uninstall Creative Cloud Desktop. Quit Creative Cloud desktop and try again." But CC desktop is not running. I had a look in activity monitor and didn't see anything.Okay - I think I resolved this by closing some stalled processes in Activity Monitor, then restarting Creative Cloud desktop, then updating in the normal way.
-
I'M GETTING Creative Cloud desktop failed to update.(Error code: 50)
Creative cloud is not auto updating. I get Creative Cloud desktop failed to update.(Error code: 50)
rickh143
Are you on Windows computer, if yes.
End All Adobe background processes from task manager and then try to update , processes like Acrotray
You may also refer
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
Maybe you are looking for
-
How do I fix the album art on my iPod? It has been scrabbled due to the iOS update.
My iPod touch 5th generation has had two problems come up since the iOS update; I regret updating because I was happy with how it was before. The album art has been scrabbled on my iPod; it has placed album art that goes with other songs to the wrong
-
How to display diferent Title by using diferent TC in one Report
Hi all, Ich have a problem by Implementation: So my Report must be calling from 2 Transactions Transaction 1 call Report 1 --> show title 1 (exp. Windows was called by Transaction 1) (start window - Dynpro screen 1000) Transaction 2 call Report 1 -->
-
After the newe update i am not longer abled to open new tabblads
Hello pleaple after the new update i whas no longer anabled to open farder any king of a new tabled. When i clik on the buttun to open a new one thare hapens nohing. please seport.
-
HT5858 How do I get my full keyboard back? It is now coming up split on each side of screen.
I do not know how this split keyboard came started coming up this way. Thanks for any help getting full keyboard back.
-
Results of multiple queries in one report
Hi I would like to create one report with multiple rows and each row should display result of a different query. I guess I can use multiple report on one region or multiple regions in one place. (1)However is there a more elegant way of creating a si